Related
Background is, I was flashing JAC's latest kernel onto my phone, which I had done twice before. Unfortunately, ODIN was getting stuck at zimage. After trying a few times, I decided to go back to the version of the kernel I was running previously, which I knew worked. I tried to flash the kernel but odin kept getting stuck on zimage again.
I tried restarting the computer, battery pulls on the phone, different usb ports and nothing has worked.
In desperation I tried to flash the stock firmware back, but ODIN gets stuck at cache.rfs.
Did I brick my phone?
Which version of windows are you using? Try from a different computer.
the3dman13 said:
Which version of windows are you using? Try from a different computer.
Click to expand...
Click to collapse
Windows 7 32bit. I've also tried a computer running xp home.
My main pc runs windows 7 64 bit, but odin doesn't work on it, even in compatibility mode.
The phone is f'ed. Im going into the tmo store this morning, I hope they dont give me a hard time.
ArbitrageMan said:
My main pc runs windows 7 64 bit, but odin doesn't work on it, even in compatibility mode.
Click to expand...
Click to collapse
BS! Heh, I restored my phone using ODIN flasher. I have windows 7 64 bit. I don't have to do anything special, just followed directions and it worked. Make sure you have 64 bit Samsung Drivers.
zaduma said:
BS! Heh, I restored my phone using ODIN flasher. I have windows 7 64 bit. I don't have to do anything special, just followed directions and it worked. Make sure you have 64 bit Samsung Drivers.
Click to expand...
Click to collapse
Done. The phone is detected by odin in 7 - 64, but when I try to flash, odin throws up a couple of messages in chinese and then sits there doing nothing. It never starts the flashing process.
hey did you fix your phone...im having the same issue
You guys try flashing anything via clockwork recently? There are recovery images for stock inside the odin thread from jac and stock I images for a kernel in his kernel thread... That's if you can even get into recovery now.....
Pooped from my Samsung Vibrant using XDA app... Dont mind the skidmarks...
on the same boat any other solutions
have you guys tried the toolbox?
http://forum.xda-developers.com/showthread.php?t=954509
Here is another good thread to check out.
http://forum.xda-developers.com/showthread.php?t=1013967
Flag eugenes froyo that doesn't brick. Look it up it will fix it
Sent from my SCH-I500 using XDA App
No idea if this will help, but make sure you are using a later version of Odin (1.7 or above).
Also might try flashing with Heimdall. Works very well in my experience.
Ok here's what happened. When I flashed Nero v4, I rebooted into recovery and flAshed 2.2 stock kernel and jk6 modem without knowing that voodoo has been enabled. So I can get into recovery, but only the stock recovery not clock work. Also I'm using Odin v1.7 and Odin v1.00. Also when I put my phone in download mode Odin does not recognize it. By the way it sometimes recognizes it on the samsung boot screen. So what's the problem with this thing? I am SCARED!!!!!!
make sure ur fone is in download mode then unplug it from the usb and restart odin, then plug it back in.. if you can get to stock recovery then try using adb or something to install the clockwork recovery update.zip to your phone
This may be something you have done, but just in case. Do you have kies installed? Or at the very least the drivers?
I have also had times (today as a matter of fact) where I put it in download mode but the PC didnt make the eject/connect noise. I had to restart the phone again and put it in download mode again. (if you only unplug-plug in it may work, but its 50/50 chance itl just freak out)
I keep a copy of kies on my SDcard just for situations like today.
Ok seeing as I had this problem a few weeks ago ill just share my solution, in the case of windows 7. If you have windows 7 right click on odin and click compatability, then roll it back to windows xp sp 3. Next run odin in administrator mode. Next, when you power down your phone, connect the usb cable first, then quickly hold volume up and down, and don't release them. don't worry if it doesn't connect, because I usually have to do this 4or 5 times. Run your pit and ROM and click start, and its my experience that letting go of volume up and down will disconnect odin. I hope this was helpful just trying to be a productive member of the community.
Odin was able to find my vibrant, but when i press "start" the process gets stuck on "analyzing files..." and nothing happens. By the way, I'm trying to go back to stock ji6 from Axura. I'm new at this. I was able to root my vibrant and get Axura on it, but i need to do a warranty exchange on my phone, so have to go back to stock because I don't think they will cover it otherwise. If there is an easier way to go back to Android 2.1 ji6, please let me know. So far Odin is not processing it...please help
I was had similar problems as well and it turned out fine. See this link at reply #3 (mine). The final issue for me to overcome was to make sure I had the proper .tar and .pit files as well as the updated samsung drivers. I include a link to a file called all_in_one that should be helpful.
http://forum.xda-developers.com/showthread.php?p=10387163#post10387163
zedgar said:
I was had similar problems as well and it turned out fine. See this link at reply #3 (mine). The final issue for me to overcome was to make sure I had the proper .tar and .pit files as well as the updated samsung drivers. I include a link to a file called all_in_one that should be helpful.
http://forum.xda-developers.com/showthread.php?p=10387163#post10387163
Click to expand...
Click to collapse
I tried it everything that u posted and I still get windows could not recognize the device. I tried on both a vista machine and a xp machine. Nothing works!!!! Any ideas?
helikido said:
I tried it everything that u posted and I still get windows could not recognize the device. I tried on both a vista machine and a xp machine. Nothing works!!!! Any ideas?
Click to expand...
Click to collapse
Guys is there a way that I can adb clock work recovery and flash my voodoo soft bricked vibrant?
helikido said:
Guys is there a way that I can adb clock work recovery and flash my voodoo soft bricked vibrant?
Click to expand...
Click to collapse
Have you tried "adb reboot clockwork recovery" I remember when I had my first brick thats how I did it have you tried using odin 1.3 thats what I use and I have windows 7 64bit and it works all the time do you have the samsung drivers sorry I have to ask ?
Sent from my SGH-T959 using XDA App
AustinKnight45 said:
Have you tried "adb reboot clockwork recovery" I remember when I had my first brick thats how I did it have you tried using odin 1.3 thats what I use and I have windows 7 64bit and it works all the time do you have the samsung drivers sorry I have to ask ?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
well I'm using Odin v1.7. Also I have the Samsung drivers that were posted on this thread by a reply. Also how can i flash clockwork recovery through adb and what files do i need to do that.
helikido said:
well I'm using Odin v1.7. Also I have the Samsung drivers that were posted on this thread by a reply. Also how can i flash clockwork recovery through adb and what files do i need to do that.
Click to expand...
Click to collapse
Ok I dont know how to flash clockwork through adb have gone to the clickwirk recovery thread and checked there? Why can't you just select re install packages if you had clockwork before then thats all you do to get into it ?
Sent from my SGH-T959 using XDA App
AustinKnight45 said:
Ok I dont know how to flash clockwork through adb have gone to the clickwirk recovery thread and checked there? Why can't you just select re install packages if you had clockwork before then thats all you do to get into it ?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
because everytime i select that it reboots and doesn't take me to clockwork.
I have tried to update manually but cant. I have downloaded the file from samsung, put on root of card as update.zip and tried to install from clockwork. Is this the wrong way to do it.
I am on all stock and have clockwork installed. I downloaded from the link that has been provided from samsung It says E:Error in /sdcard/update.zip
Firmware version-2.1-update1
Build Number-SPH-D700 ECLAIR.DI18
So is there something I am doing wrong?
If you're using clockwork, you aren't on stock. Last resort is to use the flash utility that Samsung provided. It completely wipes your phone (not your sd card).
nubsors said:
If you're using clockwork, you aren't on stock. Last resort is to use the flash utility that Samsung provided. It completely wipes your phone (not your sd card).
Click to expand...
Click to collapse
Is there a way to remove clockwork besides going back to stock? Also since I do have clockwork installed, will I not get the ota update to work correctly?
I can tell you what I know.
1) The official OTA update does not work with non-stock roms. In your case, your rom became non-stock once you installed CWR.
2) The flash utility provided by samsung will take any epic and clear it of user data and the existing rom and then flashes the 2.2.1 official rom. Your SD card will be untouched, at least mine was.
3) You can always re-root after you've flashed the official release. Do a search in this forum and you can find threads that explain how.
Good luck sir.
Just go get the cwm flashable pre-rooted eb13 rom that dameon87 posted in the dev section. There's also a link to it in the wiki.
DiGi760 said:
Just go get the cwm flashable pre-rooted eb13 rom that dameon87 posted in the dev section. There's also a link to it in the wiki.
Click to expand...
Click to collapse
Any difference between that and the one you can download from samsung or what you would get from OTA?
mynewepic10 said:
Any difference between that and the one you can download from samsung or what you would get from OTA?
Click to expand...
Click to collapse
Need to know too.
DiGi760 said:
Just go get the cwm flashable pre-rooted eb13 rom that dameon87 posted in the dev section. There's also a link to it in the wiki.
Click to expand...
Click to collapse
That one did not work. Do I need to try to get the one that is not signed. I dowloaded the signed one and it did not work. After the install it tried to boot up, but went to the samsung screen and then into the official factory restore mode and tried to reboot and stuck on samsung screen.
Use the unsigned one. The only difference betwen the flashable and the one from samsung is the flashable is deodexed.
Sent from my SPH-D700 using Tapatalk
s9ortner said:
Use the unsigned one. The only difference betwen the flashable and the one from samsung is the flashable is deodexed.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Thanks doing that now.
I had the same problem. Will try odin method when I get home, but I doubt that will work. Didn't work with the developers froyo.
Sent from my SPH-D700 using XDA App
I can't get the manual to work - mine is rooted and rommed, but my husband's is stock.
I have downloaded direct from Samsung 3 times. Once loaded on computer and opened, the Eula doesn't even have the Next button which is needed to proceed.
So strange, guess he will wait for the OTA and drain his battery at an inconvenient time!!
s9ortner said:
Use the unsigned one. The only difference betwen the flashable and the one from samsung is the flashable is deodexed.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
I tried both of them and neither one of them worked.
nmoreman said:
I can't get the manual to work - mine is rooted and rommed, but my husband's is stock.
I have downloaded direct from Samsung 3 times. Once loaded on computer and opened, the Eula doesn't even have the Next button which is needed to proceed.
So strange, guess he will wait for the OTA and drain his battery at an inconvenient time!!
Click to expand...
Click to collapse
I'm getting the same problem with the samsung update software. I click yes to accept
And there is nothing that says next, just exit. I am getting errors using odin too. My computer
will see my phone just fine.....until I put it in download mode and try to connect with odin.
I keep trying to repair modem and restart computer to no avail. Its just weird how it all changes for the worse in DL mode. I don't know what to do....
Sent from my epic that is stuck forever on 2.1
funeralplanner said:
I'm getting the same problem with the samsung update software. I click yes to accept
And there is nothing that says next, just exit. I am getting errors using odin too. My computer
will see my phone just fine.....until I put it in download mode and try to connect with odin.
I keep trying to repair modem and restart computer to no avail. Its just weird how it all changes for the worse in DL mode. I don't know what to do....
Sent from my epic that is stuck forever on 2.1
Click to expand...
Click to collapse
If you are using odin try this.
Start odin on your PC first and have it up.
Put phone into download mode
Plug in your phone via usb and see if that helps.
It already sounds like you have the samsung drivers installed, but check to make sure.
mynewepic10 said:
If you are using odin try this.
Start odin on your PC first and have it up.
Put phone into download mode
Plug in your phone via usb and see if that helps.
It already sounds like you have the samsung drivers installed, but check to make sure.
Click to expand...
Click to collapse
Well I gave that a try. No go. I have tried everything I know. Two different computers, both xp. I can't even use the samsung utility because I keep getting the cant connect to usb. When it isn't in download mode i can connect to the computer, both computers just fine. It will tell me what phone I have and all. I just don't get it. Maybe I will just delete driver and install again. Is it a phone problem?
funeralplanner said:
Well I gave that a try. No go. I have tried everything I know. Two different computers, both xp. I can't even use the samsung utility because I keep getting the cant connect to usb. When it isn't in download mode i can connect to the computer, both computers just fine. It will tell me what phone I have and all. I just don't get it. Maybe I will just delete driver and install again. Is it a phone problem?
Click to expand...
Click to collapse
I have used a different version of odin with no issues at all. I have never used this one before.
PLEASEEE!!! help me out i tried upgrading from kies mini to froyo. I did this with success earlier in the past on my old vibrant but had it replaced to a referbished one and i tried upgrading it now.. but my vibrant was stuck at downloading the uprade on kies mini at 1% for half an hour... and the vibrant had the android shoveling yellow sign saying do not turn off target... for half an hour as well.. I knew something was wrong there because it didnt take even close to that long last time..
NOW I tried unplugging the usb wire restarting the phone in emergency mode still nothing... now all i have is a cellphone...yeild sign... computer icon showing..
PLEASE HELP!!!
Dont worry you totally didnt brick your phone. Its pretty common, can you get your phone into download mode? If you can then just odin to stock.
1.Take your battery, sim card and SD card out
2. Plug in USB Cable
3. Hold volume up/down and plug in battery (There are a few ways of doing download mode and I believe its phone specific, or if you have bootloaders installed its different as well, google around a bit...
4. Start odin and presto, your phone works again!
hey thanx... I just did that.. I never used odin but i installed odin with all the files... I believe my vibrant is hardware locked because i was trying to get into download mode for 2 hours with different techniques.. such as just volume keys and power button... taking out the battery holding volume keys then putting it back in.. but nothing put me into a downlaod mode... somehow odin still found my phone while i was still stuck under that picture...
I loaded the .pit file without the jfd image.... becuase i didnt know what window i was suppose to load the jfd image from... like pda.. or etc???
anyway so i just loaded the .pit file and clicked start it reset the phone and the phone went into restart mode and it turned on fine i checked it works fully... lol.
It makes no sense... was i suppose to load the jfd file somewhere?????
i still want to upgrade my vibrant to 2.2... but now whenever i turn on the keis mini it promps me to emergency recovery upgrade... so i tried doing that and went into download mode since now i can.. and plugged in my phone but the progress bar on my computer for upgrading never moved from 0%... its odd... am i doing something wrong?
so again i disconnected and "bricked" my vibrant again lol... went into odin followed the same steps just loading the .pit file and it reset the vibrant back to normal again lol...
Im so confused yet happy that i have my phone working but i still want my froyo... i love the fact that i can use yahoo video messaging on it with froyo and have flash and other benefits..
any advice?
Thanx again
try this...........
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
put pit in pit and tar in pda on odin
Connect it to the PC and see if ODIN recognizes it.
If it does, you are safe, flash stock.
EDIT: nvm, didn't notice the third post was yours.
Anyways, if ODIN can STILL recognize it, get the first from the link on the post above, FOLLOW INSTRUCTIONS and enjoy your again-useful phone.
I had that same issue once.
Try a JIG. And do a search, I see like 50 posts a week like this.
First.
Thank you all for taking your time to help. I have one last question... since I used Odin but it just reset my phone and I didn't flash the old firware on it..... ever since that now I tried to update my phone with kies mini and it says phone unregistered... in that place before it used to say new firmware available and showed old forward numbers/letters.
So if I use odin all the way will this resolve "unregistered device" problem?
Thanx again
Sent from my SGH-T959 using XDA App
AlexSochi8 said:
First.
Thank you all for taking your time to help. I have one last question... since I used Odin but it just reset my phone and I didn't flash the old firware on it..... ever since that now I tried to update my phone with kies mini and it says phone unregistered... in that place before it used to say new firmware available and showed old forward numbers/letters.
So if I use odin all the way will this resolve "unregistered device" problem?
Thanx again
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It should.
Sent from my GT-I9000 using XDA Premium App
Bricked
I have a similar issue, was soft bricked, Odin to stock then, while using Mini Kies to upgrade back to Froyo the phone turned off and never came back on. I cannot get any response from the phone as far as light's or sounds. Checked a few batteries and still no use. I'm curious if anybody else has had a similar experience?
so if it should solve the unregisted problem... where I put in the pda file... is it possible to put in the last froyo there so odin could flash froyo on my phone so basically i wont have to go through kies process?
odin back to 2.1 then root and then flash a 2.2 rom way better then a stock 2.2 rom
Dan_Brutal said:
Try a JIG. And do a search, I see like 50 posts a week like this.
Click to expand...
Click to collapse
I might be late to the party but I've built a jig and I can't believe how quickly this thing saved my ass...
Sent from my GT-I9000 using XDA Premium App
dsuycott said:
I might be late to the party but I've built a jig and I can't believe how quickly this thing saved my ass...
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Yeah man. Jigs are the balls. Saved my ass this morning with a bad bootloader flash. I got lucky though.....
Sent from my GT-I9000 using XDA Premium App
Make sure you have the right odin files, once you have gotten back to normal just do a factory reset on your phone if that is possible. Then root, flash, and do whatever you want to do. Without your proper files for odin you'll get bricked or get something different.
How screwed am I? Odin doesn't recognize phone, vibrant aio toolkit can't adb phone into recovery or download mode. Flashing different rom screwed up during kernal phase and I stupidly rebooted phone. I CAN use a jig I bought to get into download mode but computer Odin doesn't 'see' it.
Sent from my GT-I9000 using XDA Premium App
dcboi said:
How screwed am I? Odin doesn't recognize phone, vibrant aio toolkit can't adb phone into recovery or download mode. Flashing different rom screwed up during kernal phase and I stupidly rebooted phone. I CAN use a jig I bought to get into download mode but computer Odin doesn't 'see' it.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Do you have the drivers installed on your PC?
Sent from my GT-I9000 using XDA Premium App
Dan_Brutal said:
Do you have the drivers installed on your PC?
Yes, not sure what changed but I plugged the phone in again and Odin recognized it, the file I loaded is PDA_T959UVKB5.tar.md5, the process has hung up at SetupConnection...
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA Premium App
id keep trying it odin is finicky! maybe try different usb ports
ok guys i know i aksed for a lot of help.. but i have a newly discovered problem.. when i connect my vibrant thru the original usb port to transfer files back and forth it never lets me transfer even the smallest picture image... on both internal 16gb or sd... the phone computer just constantly shows transferring animation.... i tried many times.. i even scanned the phones hard drive and sd card for errors... nothing... could it be i messed something up with kies? or thats why kies in general never went with the upgrade past 1%?
its a refurbished phone.. when i got it.. i uploaded my old pics without a problem with the same usb cable..... its weird.... i dont know what to do? what is it likely the phone itself or i messed it up with kies upgrade????
please help.. its frustrating me
phone is rooted, I was using Odin to flash the new firmware but it refused to write. So I decided to install directly from recovery, I did a factory reset, cleared the cache but it refused to install. Now the device is bricked. It still goes into download mode but doesn't let any software download anything into it.
when i connect it to Odin , it shows up on the com port,it picks up the USB but dont download?
any suggestions, help please
As long u can enter download mode u still have a chance to make it work so your phone is not bricked.
The problem might be with computer drivers, try reinstall them or maybe if u got chance use another computer. Also make sure your partitions are not ext4.
Sent from my GT-I9000 using Tapatalk
It could also be the source files you try flashing. Try redownloading them or try another firmware.
Bubble-be said:
It could also be the source files you try flashing. Try redownloading them or try another firmware.
Click to expand...
Click to collapse
Also that, especially that!!!
fayeznoor said:
phone is rooted, I was using Odin to flash the new firmware but it refused to write. So I decided to install directly from recovery, I did a factory reset, cleared the cache but it refused to install. Now the device is bricked. It still goes into download mode but doesn't let any software download anything into it.
when i connect it to Odin , it shows up on the com port,it picks up the USB but dont download?
any suggestions, help please
Click to expand...
Click to collapse
What kind of message appears in odin when you try to flash?
fayeznoor said:
phone is rooted, I was using Odin to flash the new firmware but it refused to write. So I decided to install directly from recovery, I did a factory reset, cleared the cache but it refused to install. Now the device is bricked. It still goes into download mode but doesn't let any software download anything into it.
when i connect it to Odin , it shows up on the com port,it picks up the USB but dont download?
any suggestions, help please
Click to expand...
Click to collapse
Disable KIES drivers running in the background on computer, it helped me...
I had a similar problem. Odin got stuck at "Setting up connection" or something like that. Tried rebooting, downloading some other firmwares, etc. nothing worked. Then I tried doing it from other computer and surprisingly it worked at the first try.
CaraMuuu said:
I had a similar problem. Odin got stuck at "Setting up connection" or something like that. Tried rebooting, downloading some other firmwares, etc. nothing worked. Then I tried doing it from other computer and surprisingly it worked at the first try.
Click to expand...
Click to collapse
That's because you had Kies processes running in the background.
hellcry30 said:
Also make sure your partitions are not ext4.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Anyway to convert ext4 to rfs in a bricked phone or one that only goes to download and recovery modes? Just want to know for my safety as all my partitions including /system are ext4.
Just using a .pit file and repartitioning the device, converts all FS to RFS.
So you just need to disable KIES, which seems to be the culprit.
Use Odin 1.82 or 1.85 check my signature.
Thanks goodness for xda
Yes I just did this to my phone trying to flash a new modem which failed and messed up my phone..
What you should do is find your stock firmware on this page:
http://forum.xda-developers.com/showthread.php?t=1075278
Re-install the usb drivers through kies, disable kies in the task manager (anything with kies in it, maybe a few), plug into a different usb port, go into download mode on your phone (volume down+home+power button) then flash the stock rom through odin 1.85 and you should be good, I didnt even loose anything on my phone so I'm happy. I never post but wanted to give a thanks to the folks here.
NeoMustain said:
Anyway to convert ext4 to rfs in a bricked phone or one that only goes to download and recovery modes? Just want to know for my safety as all my partitions including /system are ext4.
Click to expand...
Click to collapse
Well you had the option to change it in recovery mode with speedmod kernel... Can you flash that?
Sent from my GT-I9000 using Tapatalk