I bought Wildfire from Taiwan. I just got infornation to upgrade to 2.2. But when it install software. It is always fail. I had got HCT support need to remove ClockworkMod Recovery or stop it. Because it cause verify its software version fail. How can I pass these and upgrade my wildfire.
The following is my LOG
E:failed to verify whole-file signature
I:verify_file returned 1
E:signature verification failed
Installation aborted.
I:Set boot command ""
/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue.
Starting recovery on Fri Dec 31 23:15:04 2010
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (240 x 320)
ClockworkMod Recovery v2.5.0.1
Related
I am using multirom v8, with TWRP v2.4.1.0 on a Nexus 7 Wi-fi version. I have stock Android 4.2.1 (but with Tasssadar's kexec-hardboot kernel) as internal and Ubuntu 13.04.
I received the notification that the 4.2.2 update was available. So, I started to install it but it was unsuccessful. I do not remember but I think it said that update had failed and it rebooted.
So, I manually downloaded the update ( to update build JOP40D to JDQ39) and tried to install it using the modified recovery. Got the following error message (relevant parts):
I:Attempt to load settings from settings file...
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Switching packages (TWRP)
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/Download/6ece895ecb23.signed-nakasi-JDQ39-from-JOP40D.6ece895e.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
Verifying current system...
contents of partition "/dev/block/platform/sdhci-tegra.3/by-name/LNX" didn't match EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5060608:319331fae14fec8a88063751475fce26bae328e0:5062656:af83f09e77a64ed7ede2adad2a16bd0c12d5d7fd
file "EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5060608:319331fae14fec8a88063751475fce26bae328e0:5062656:af83f09e77a64ed7ede2adad2a16bd0c12d5d7fd" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5060608:319331fae14fec8a88063751475fce26bae328e0:5062656:af83f09e77a64ed7ede2adad2a16bd0c12d5d7fd")
assert failed: apply_patch_check("EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5060608:319331fae14fec8a88063751475fce26bae328e0:5062656:af83f09e77a64ed7ede2adad2a16bd0c12d5d7fd")
E:Error in /sdcard/Download/6ece895ecb23.signed-nakasi-JDQ39-from-JOP40D.6ece895e.zip
(Status 7)
Error flashing zip '/sdcard/Download/6ece895ecb23.signed-nakasi-JDQ39-from-JOP40D.6ece895e.zip'
Updating partition details...
Any suggestions to fix this issue?
PS: I would have posted this here: http://forum.xda-developers.com/showpost.php?p=38043472&postcount=1157 but I do not have sufficient priviledges...
rigved said:
I am using multirom v8, with TWRP v2.4.1.0 on a Nexus 7 Wi-fi version. I have stock Android 4.2.1 (but with Tasssadar's kexec-hardboot kernel) as internal and Ubuntu 13.04.
I received the notification that the 4.2.2 update was available. So, I started to install it but it was unsuccessful. I do not remember but I think it said that update had failed and it rebooted.
So, I manually downloaded the update ( to update build JOP40D to JDQ39) and tried to install it using the modified recovery. Got the following error message (relevant parts):
I:Attempt to load settings from settings file...
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Switching packages (TWRP)
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/Download/6ece895ecb23.signed-nakasi-JDQ39-from-JOP40D.6ece895e.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
Verifying current system...
contents of partition "/dev/block/platform/sdhci-tegra.3/by-name/LNX" didn't match EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5060608:319331fae14fec8a88063751475fce26bae328e0:5062656:af83f09e77a64ed7ede2adad2a16bd0c12d5d7fd
file "EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5060608:319331fae14fec8a88063751475fce26bae328e0:5062656:af83f09e77a64ed7ede2adad2a16bd0c12d5d7fd" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5060608:319331fae14fec8a88063751475fce26bae328e0:5062656:af83f09e77a64ed7ede2adad2a16bd0c12d5d7fd")
assert failed: apply_patch_check("EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5060608:319331fae14fec8a88063751475fce26bae328e0:5062656:af83f09e77a64ed7ede2adad2a16bd0c12d5d7fd")
E:Error in /sdcard/Download/6ece895ecb23.signed-nakasi-JDQ39-from-JOP40D.6ece895e.zip
(Status 7)
Error flashing zip '/sdcard/Download/6ece895ecb23.signed-nakasi-JDQ39-from-JOP40D.6ece895e.zip'
Updating partition details...
Any suggestions to fix this issue?
PS: I would have posted this here: http://forum.xda-developers.com/showpost.php?p=38043472&postcount=1157 but I do not have sufficient priviledges...
Click to expand...
Click to collapse
I think the problem is with bootloader (not sure) ...i had same multirom (cyanogenmod +Ubuntu ) ..i deleted ubuntu then flashed Stock 4.2.1 with wugstool then updated to 4.2.2 ... try updating bootloader
rigved said:
I am using multirom v8, with TWRP v2.4.1.0 on a Nexus 7 Wi-fi version. I have stock Android 4.2.1 (but with Tasssadar's kexec-hardboot kernel) as internal and Ubuntu 13.04.
I received the notification that the 4.2.2 update was available. So, I started to install it but it was unsuccessful. I do not remember but I think it said that update had failed and it rebooted.
So, I manually downloaded the update ( to update build JOP40D to JDQ39) and tried to install it using the modified recovery. Got the following error message (relevant parts):
I:Attempt to load settings from settings file...
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Switching packages (TWRP)
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/Download/6ece895ecb23.signed-nakasi-JDQ39-from-JOP40D.6ece895e.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
Verifying current system...
contents of partition "/dev/block/platform/sdhci-tegra.3/by-name/LNX" didn't match EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5060608:319331fae14fec8a88063751475fce26bae328e0:5062656:af83f09e77a64ed7ede2adad2a16bd0c12d5d7fd
file "EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5060608:319331fae14fec8a88063751475fce26bae328e0:5062656:af83f09e77a64ed7ede2adad2a16bd0c12d5d7fd" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5060608:319331fae14fec8a88063751475fce26bae328e0:5062656:af83f09e77a64ed7ede2adad2a16bd0c12d5d7fd")
assert failed: apply_patch_check("EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5060608:319331fae14fec8a88063751475fce26bae328e0:5062656:af83f09e77a64ed7ede2adad2a16bd0c12d5d7fd")
E:Error in /sdcard/Download/6ece895ecb23.signed-nakasi-JDQ39-from-JOP40D.6ece895e.zip
(Status 7)
Error flashing zip '/sdcard/Download/6ece895ecb23.signed-nakasi-JDQ39-from-JOP40D.6ece895e.zip'
Updating partition details...
Any suggestions to fix this issue?
PS: I would have posted this here: http://forum.xda-developers.com/showpost.php?p=38043472&postcount=1157 but I do not have sufficient priviledges...
Click to expand...
Click to collapse
I *just* fixed this problem. Mine was failing on the same line. The trick is to modify the updater-script. I modified it to stop the check, and it flashed without a problem on my tablet. I also removed the sections where it replaced the recovery.
I'm hesitant to post mine because I was NOT running multiboot, so when it patched the bootloader regardless of the checksum, I was fine (Or lucky). I don't know what will happen if you use the one I modified, or if 4.2.1 CAN be updated safely without touching the bootloader.
So here: This script is very untested, and modified by someone who doesn't fully understand what he did. Use this at your own risk, and realize I hold no responsibility if you brick your N7..
That said, if you replace the 'updater-script' in the update zip (located in META-ING/com/google/android) with this one, it will patch.
The LNX partition is the boot partition.
That check is failing because when the script looks at the existing LNX partition (boot), it does not find what it expects to find.
The OTA patches existing files, it doesn't replace them with a full replacement copy. So the starting condition of each file to be patched must be exact.
I believe that the check of the LNX partition is the very last checksum verified, so that is good news - it means nothing else checked in /system is mismatched.
You can either hack the installer script as above (and thus need to use a custom recovery to install it because this will break the signing of the factory package), or you can use a completely safe route:
- make full Nandroid backup (including recovery if possible)
- flash the stock 4.2.1 boot image ( not bootloader! ) to the boot partition
- copy the factory ota .zip file to /cache/update.zip
- create a file named "command" with a single line in it:
--update_package=/cache/update.zip
and copy it to /cache/recovery/command
- flash the stock 4.2.1 recovery to the recovery partition
- reboot to recovery
This runs the pure stock OTA install which does all the patching plus installs a new 4.18 bootloader, 4.2.2 boot partition, and 4.2.2 stock recovery.
Before you get too antsy bear in mind that this whole situation is likely to happen again with the next OTA - meaning, it would be a great time to get a backup of pure stock 4.2.2 (including stock recovery and stock boot partition).
So, now:
- perform a soft boot of a custom recovery (don't flash it in place just yet!)
- overflash a SuperSU/Superuser root kit
- make a Nandroid Backup of this entire "lightly rooted pure stock 4.2.2 ROM" - including the recovery partition!
- hard-flash your custom recovery
- restore only the boot partition from the first Nandroid backup described in these instructions.
cheers
I had a few issues and long story short my Nexus 4 will not boot correctly.
I am trying to sideload image-occam-krt16s.zip onto it. I have no problem transferring the file, but when it goes to install it errors
here is what the log reads:
Finding update package...
I: Update location: /tmp/update.zip
Opening update package...
Installing update...
Insallation aborted.
I:Can't partition non-vfat: datamedia
I:Can't format unknown volume: /external_sd
I:Can't format unknown volume: /ennc
Any ideas on what I need to do?
thanks!
Sideload isn't going to work for you just flash a stock image through fastboot.
Hi.
I'm installing Imperium ROM (http://forum.xda-developers.com/showthread.php?t=2706844).
When install Bloatware_6.1.zip I get:
E: Can't open /storage/sdcard1/Bloatware_6.1.zip (bad)
I already download the file again: MD5 = 7cff9cf93b340f9b9cfef64338fbad10
and the same error ...
Any tips, please?
I have tried installing MIUI6 chinese version 5.5.29 in my redmi note 3g but it gives me error warning : no file_contexts apply parsed perms: 1setfilecon of /system/lost+found to u : object_r:system_file:s0 failed: Operation not supported on transport endpoint set_metadata_recursive: some changes failed Installation aborted.
m-a-n-u said:
I have tried installing MIUI6 chinese version 5.5.29 in my redmi note 3g but it gives me error warning : no file_contexts apply parsed perms: 1setfilecon of /system/lost+found to u : object_r:system_file:s0 failed: Operation not supported on transport endpoint set_metadata_recursive: some changes failed Installation aborted.
Click to expand...
Click to collapse
You need latest twrp to flash http://en.miui.com/thread-115412-1-1.html
Hi there,
I was trying to adb sideload december update ota, but it always gives the following error.
On PowerShell:
Code:
PS C:\adb> adb sideload ffc0b01f8888cb7bbbc8fa2938247c4f1d04cabf.zip
loading: 'ffc0b01f8888cb7bbbc8fa2938247c4f1d04cabf.zip'* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Total xfer: 1.00x
On Recovery:
Code:
Finding update package...
Opening update package. . .
E: unknown volum for path [/sideload/package.zip]
Verifying update package...
Update package verification took 152.7 s (result 0).
Installing update...
E:Failed to parse build number in post-build-incremental=7.12.7.
E:Error in /sideload/package.zip
(Status 255)
E:unknown volume for path [/cache/recovery/uncrypt_status]
Installation aborted,
Any Solutions?
Sideload don't work.
.
Similar problem
Hriddhi said:
Hi there,
I was trying to adb sideload december update ota, but it always gives the following error.
On PowerShell:
Code:
PS C:\adb> adb sideload ffc0b01f8888cb7bbbc8fa2938247c4f1d04cabf.zip
loading: 'ffc0b01f8888cb7bbbc8fa2938247c4f1d04cabf.zip'* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Total xfer: 1.00x
On Recovery:
Code:
Finding update package...
Opening update package. . .
E: unknown volum for path [/sideload/package.zip]
Verifying update package...
Update package verification took 152.7 s (result 0).
Installing update...
E:Failed to parse build number in post-build-incremental=7.12.7.
E:Error in /sideload/package.zip
(Status 255)
E:unknown volume for path [/cache/recovery/uncrypt_status]
Installation aborted,
Any Solutions?
Click to expand...
Click to collapse
I got no ROM or OS installed in my MI A1, and im unable to load anything from ADB sideload as phone is not being detected. What could i possibly do to get the ROM in TWRP (which currently as nothing)?
EDL mode?
Sent from my Mi A1 using XDA Labs
anukoolsriv said:
I got no ROM or OS installed in my MI A1, and im unable to load anything from ADB sideload as phone is not being detected. What could i possibly do to get the ROM in TWRP (which currently as nothing)?
Click to expand...
Click to collapse
Finally did you get a solution for this?
I have the same error currently.