Database Users

Windows Phone 7

phoenixtraveller said:
0. Start all over again - forget everything - to avoid over-partition resizing etc and fragging of your nand which is causing people's hd2 phones to crash and DIE.
1. Put your stock rom ruu_signed.nbh on sd card as LEOIMG.nbh (<4gb card)
2. Reflash that by holding vol down - hspl.
3. Reboot and dont got into it - goto new (old) spl.
4). Connect and do HSPL3_PKG.exe, We hacked it. Best to NOW change your drivers to MTTY drivers (first point you can as hspl rapitool doesnt recognize them so change to unsigned drivers now) and connect then do:
task 28 55aa
task 29
task 8 (which is reboot)
YOU NEED TO CLEAN IT OUT WHEN FLASHING OVER AND OVER AND OVER or you end up with fk hd2 with too many bad blocks in nand and screwed partitions.
5.) Now re-do your radio with latest by replacing LEOIMG.nbh with ruu_signed.nbh from radio rar/zip. = ie 2.15 radio and vol-down reboot hspl again.
6) Now replace LEOIMG.nbh with MAGLDR 112 .nbh as LEOIMG.nbh on sd and
YOU ARE DONE.
7A) Jump down to replace data.zip 7B) before you Run dwi.exe and install Windows 7 then do ChevronWP7 hacks/etc and get LIVE. note: SOMETIMES helps to pull battery out not press vol down twice at 1234-5-6 (go go go) point - ie: first HARDRESET per Cotulla and DFT instructions. and CLEAN 8gb class 10 SD-card SANDISK is best and OEM (but faster).
7B) .........final.....stage.....here....
Continuing on: wp7 CLEAN: WORKS:
Before doing dwi.exe PROPERLY: make a fake data.zip with EMPTY (ie: notepad make 0kb .txt files then rename part00.bin, part01.bin, ALL THE WAY TO part07.bin and save these into data.zip (rename real data.zip data.bak or whatever).
Then flash with dwi.exe so this CLEANS OUT PARTITIONS COMPLETELY with ZEROES.
now: notes:
SOMETIMES helps to pull battery out not press vol down twice at 1234-5-6 (go go go) point - ie: first HARDRESET per Cotulla and DFT instructions. and CLEAN 8gb class 10 SD-card SANDISK is best and OEM (but faster). Run dwi.exe and install Windows 7 then do ChevronWP7 hacks/etc and get active microsoft= LIVE!
Also - questions:
Anyone take note and/or mtty'd or used Cotulla's SIMULACRUM SPL (LEO 1000 SPL here)? ie: pressing just vol down gets you to wp7 spl before it boots (after magldr of course - 1234 vol down). I have reverse engineered daf.exe/dwi.exe and binaries+ using 24nand+ and dumping/mttying have been able to crack a few commands for this strange but necessary second-second-program-loader. Anyway - TO CLEAN YOUR PHONE wp7-method do this and (this is the both normal winmo and my replaced data.zip NEXT STAGE CLEAN after the above oem/stock/winmo and spl cleaning by sd... save the life of your hd2 for another year...
(nb: you can also do daf/android way with NO FILES .IMG at all - just use flash.cfg with 0 asize allsize and no boot, system, ro, nothing: just those 3. ie: partition name is 0. dont even have to name a file system. Although is interesting that daf.exe has strings in it for both: SquashFS, and WPH. !!! this is daf.exe not dwi.exe ...) hmmm.
Ok...now...go...
LIVE!
Click to expand...
Click to collapse

Hello,
I have done these steps:
1. Put your stock rom ruu_signed.nbh on sd card as LEOIMG.nbh (<4gb card)
2. Reflash that by holding vol down - hspl.
3. Reboot and dont got into it - goto new (old) spl.
and now my phone says I have SPL 3.03! I cannot flash any other SPLs anymore.
Please help....
what I am missing?
Thanks in advance

This seems like something good to do, but the instructions are very difficult to follow. If someone who understands the OP instructions could rewrite the them, that would be appreciated. Thanks in advance.

[Q] Uninstall Windows 7???

First of all, I apologize if I'm in the wrong thread.
I recently flashed my HTC HD2 and upgraded it to Windows 7 from its factory-loaded Windows 6.5. Since then, I have not been able to do anything via web on it (Marketplace, Facebook, even set-up my personal email accounts). I've toggled my connection settings plenty of times, and nothing seems to work. It keeps asking me for my Windows Live ID, but when I enter it, nothing happens because there is no internet connection. (Don't know if this is important but in case this helps: I am not in a Wi-Fi zone.) Also, it won't read my sd card either, which has music, pictures, documents, etc. As a matter of fact, the only things that I can do is call in and out, and send and receive texts. I am not liking this version of Windows too much, and would like to know, step-by-step, what to do to uninstall it and return to my safe and familiar Windows 6.5 world.
When I upgraded from 6.5 to 7, I downloaded and used ActiveSync, and it worked fine. Now, while in Win 7, when I plug the phone into my computer, my ActiveSync won't identify it.
And by the way, I tried to hard reset it, thinking that would work, but it just reset it back to Windows 7.
I just want my Windows 6.5 back as soon as possible. Any information to get me back to that point would be greatly appreciated.
--emgodhth

Download Zune program and all ur problems will be solved. It is for uploading music videos and other files.

Sorry, no offense meant here, but I don´t understand both of you guys...
emgodhth said:
First of all, I apologize if I'm in the wrong thread.
I recently flashed my HTC HD2 and upgraded it to Windows 7 from its factory-loaded Windows 6.5. Since then, I have not been able to do anything via web on it (Marketplace, Facebook, even set-up my personal email accounts). I've toggled my connection settings plenty of times, and nothing seems to work. It keeps asking me for my Windows Live ID, but when I enter it, nothing happens because there is no internet connection. (Don't know if this is important but in case this helps: I am not in a Wi-Fi zone.) Also, it won't read my sd card either, which has music, pictures, documents, etc. As a matter of fact, the only things that I can do is call in and out, and send and receive texts. I am not liking this version of Windows too much, and would like to know, step-by-step, what to do to uninstall it and return to my safe and familiar Windows 6.5 world.
When I upgraded from 6.5 to 7, I downloaded and used ActiveSync, and it worked fine. Now, while in Win 7, when I plug the phone into my computer, my ActiveSync won't identify it.
And by the way, I tried to hard reset it, thinking that would work, but it just reset it back to Windows 7.
I just want my Windows 6.5 back as soon as possible. Any information to get me back to that point would be greatly appreciated.
--emgodhth
Click to expand...
Click to collapse
There are so many great tutorials here in the forums. If you would have carefully read some more than you obviously have, then you would have avoided some of the nasty problems you have with WP7.
Also, you wouldn´t ask about a "step-by-step" instruction on what to do now.
Unfortunately, some key information is missing here, therefore, the only link I can give you is this: Click me! You should know this one already, if not, read it item by item.
Then flash the ROM which fits your device. Do *not* flash before you know exactly which ROM you need. You might brick your phone.
Oh, and btw: Was the music on your SD card when you flashed with WP7? If yes, it´s no wonder your device cannot read it, the SD card is wiped clean during the first start.
Beatazor said:
Download Zune program and all ur problems will be solved. It is for uploading music videos and other files.
Click to expand...
Click to collapse
Is this a shortcut? Kind of to avoid flashing back to WinMo 6.5 and keeping WP7? Because he maybe wiped the SD card clean?
Come on, he clearly asked how to flash another ROM, Zune cannot be the answer.

The information that you gave me is very helpful.
However, again, I'm at a standstill. I'm trying to download a stock rom, but I still need to find a way for my computer (Windows XP) to sync with my HTC HD2 (Windows Phone 7). ActiveSync won't read it, and my OS won't allow me to use WMDC!
(And just so you'll know, I didn't have my sd card installed in my phone when I flashed it.)

emgodhth said:
The information that you gave me is very helpful.
However, again, I'm at a standstill. I'm trying to download a stock rom, but I still need to find a way for my computer (Windows XP) to sync with my HTC HD2 (Windows Phone 7). ActiveSync won't read it, and my OS won't allow me to use WMDC!
(And just so you'll know, I didn't have my sd card installed in my phone when I flashed it.)
Click to expand...
Click to collapse
..again you havent bothered to read anything.
You can stick the stock rom on your SD card and rename it "leoimg.nbh" and then power phone into bootloader by powering obn phone while holding volume down button. No need for activesync/usb or windows XP.

do you have t mobile network if you do just go to settings cellular and where it says 3g connection and hit apn settings and type in epc.tmobile.com and hit the check button at the bottom and you should be set. if you dont have t mobile just find out the network apn for your network.

...even if the phone doesn't read the sd card anymore since i uploaded win 7???

=.=
You've been lectured to go out and read some threads for info, and yet you still persist with these questions that could be answered if you searched...
Anyways on topic, you say your phone does not recognize the sd card? Well try formatting the sd card with panasonic formatter then. Then put the files for reverting back to stock rom onto the root of your sd card, and then boot your phone into bootloader mode, which is the tri color screen. After that, your phone should recognize the file and revert back to winmo.

I know I COULD look through threads (and that's what I've been doing), but I just want to cut to the chase without all that geek talk. (What's the point of having a website like this if one couldn't ask questions?) Plus, now I know who to thank if it works (and who to blame if it doesn't).
Thanks for all the help. I'll let you know what happens.

It's not about what you could do... It's about what you should do.
Anyways, whilst this forum may be about Q&A's, populating a Q&A with the same questions, and the same answers sounds stupid, no?
Well hope it works for you.

emgodhth said:
I know I COULD look through threads (and that's what I've been doing), but I just want to cut to the chase without all that geek talk. (What's the point of having a website like this if one couldn't ask questions?) Plus, now I know who to thank if it works (and who to blame if it doesn't).
Thanks for all the help. I'll let you know what happens.
Click to expand...
Click to collapse
Hey Why are you even here then? YOU cant be bothered reading because of "geek" talk and all of a sudden its OTHER peoples fault if YOU break your phone?
If YOU don't want to read through threads that explain how to do these things as simply as possible already and actually LEARN somthing, Then why should someone retype those threads for you especially as you STILL wont understand it because it will contain the SAME terms and referances, and require YOU to STILL do some research, Just like EVERYBODY else here HAD TO DO. If you think there is some way to break the existing well explained threads down into BABY BABBLE that FOOLS who go rushing in with no clue might understand, then you are sadly mistaken. Cut your losses and buy either a dumbphone or an iphone. They are made for people like you. Just dont try jailbreaking, thats probrobly tooo complicated for you as well.
Oh and way to go insult the very people you are asking for help. dumbass.

Thanks to all those who actually helped.
Here's what I've been able to do thus far:
1.) Reformat SD card to FAT32 allocation
2.) Found and downloaded stock rom
3.) Extracted "RUU_signed.nbh" from there
4.) Transferred it to SD card (base folder)
5.) Renamed it "leoimg.nbh"
6.) Inserted SD card into phone
7.) Turned phone on into bootloader mode (tri-color)
8.) Nothing happens
I've dowloaded several versions of stock roms and tried each one, but none has worked yet. I've even renamed it using all caps ("LEOIMG.nbh") thinking that that MIGHT make a difference...it didn't.
Anyway, did I mess up somewhere? Is there something else that I'm missing?
Help!
Other information that might help:
This is what appears on my bootloader screen:
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Trying to uninstall Windows 7 and reload Windows 6.5, which is what I started out with on my phone.
Thanks!!!

emgodhth said:
Thanks to all those who actually helped.
Here's what I've been able to do thus far:
1.) Reformat SD card to FAT32 allocation
2.) Found and downloaded stock rom
3.) Extracted "RUU_signed.nbh" from there
4.) Transferred it to SD card (base folder)
5.) Renamed it "leoimg.nbh"
6.) Inserted SD card into phone
7.) Turned phone on into bootloader mode (tri-color)
8.) Nothing happens
I've dowloaded several versions of stock roms and tried each one, but none has worked yet. I've even renamed it using all caps ("LEOIMG.nbh") thinking that that MIGHT make a difference...it didn't.
Anyway, did I mess up somewhere? Is there something else that I'm missing?
Help!
Other information that might help:
This is what appears on my bootloader screen:
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Trying to uninstall Windows 7 and reload Windows 6.5, which is what I started out with on my phone.
Thanks!!!
Click to expand...
Click to collapse
wrong person Sorry.

Originally Posted by emgodhth View Post
I know I COULD look through threads (and that's what I've been doing), but I just want to cut to the chase without all that geek talk. (What's the point of having a website like this if one couldn't ask questions?) Plus, now I know who to thank if it works (and who to blame if it doesn't).[/QUOTE]
If you have looked around you wouldn't need that much help, there is many threads about this already, And this whole "geek talk" is nothing but common sense buddy. If you can't figure out how to flash back and people have pointed you in the right direction, then you should never flash again and stick with wm6.5

Steps...Try This
emgodhth said:
Thanks to all those who actually helped.
Here's what I've been able to do thus far:
1.) Reformat SD card to FAT32 allocation
2.) Found and downloaded stock rom
3.) Extracted "RUU_signed.nbh" from there
4.) Transferred it to SD card (base folder)
5.) Renamed it "leoimg.nbh"
6.) Inserted SD card into phone
7.) Turned phone on into bootloader mode (tri-color)
8.) Nothing happens
I've dowloaded several versions of stock roms and tried each one, but none has worked yet. I've even renamed it using all caps ("LEOIMG.nbh") thinking that that MIGHT make a difference...it didn't.
Anyway, did I mess up somewhere? Is there something else that I'm missing?
Help!
Other information that might help:
This is what appears on my bootloader screen:
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Trying to uninstall Windows 7 and reload Windows 6.5, which is what I started out with on my phone.
Thanks!!!
Click to expand...
Click to collapse
I understand, where he is coming from, not everyone coming to this site are geeks/devs(am myself a dev) and can easily get confused with all the forums...
I understand your problems are may be unique, so here are the steps you can try and hopefully these wotk for you..
**Read the steps completely and keep the files ready before
starting this process to save time later..
1. Go into bootloader (tri color screen)..should say 'Serial' in the middle of the screen.
2. Pause/stop your PC antivirus
3. Next connect your phone with USB to your computer, the screen should now say USB instead of Serial
4. Now run Task29*
5. Turn off your phone(by taking the battery out) and turn it back again and go into bootloader mode
6. Install the latest official HTC HD2 Win6.5 Rom*(2.15.50.14 or something)..NOTE: Just the rom which you can get from threads here in XDa forums, not the whole OS.
7. Format your SD card(panasonic formatter), use setting low level (with delete), this will take around 5-10 mins depending on your sd card mem size.
8. Now get the latest official Win 6.5 ROm from HTC and install it using the SD card method as mentioned before.
(Note, please read some posts to find out how to do this correctly)
The above should work , for the most cases.
Let me know, if it helps you or not.

Hi,
I read all the thread on how to remove windows 7 on HTC HD2, but when I hold the volume button down and press the power key, I see the bootloader screen, but then the "loading" page never comes. I tried it several times. And I also revive my SD card before doing that. Now my phone doesn't even have any more memory. SO I can text, can't add music. When I connect my phone through the USB cable, the PC doesn't open Zune windows. So it doesn't recognize the presence of the phone.
Do you know what is wrong? Thank you for any idea on that.

Anyone having similar issues try these for starters:
Use WP7 as USB drive
http://forum.xda-developers.com/showthread.php?t=915664
Working SD cards
http://forum.xda-developers.com/showthread.php?t=914780
APN Settings to get connected to network
http://forum.xda-developers.com/showthread.php?t=915375&page=5
More APN Settings
http://forum.xda-developers.com/showthread.php?t=915375
Running WP7 Developer Tools on XP
http://forum.xda-developers.com/showthread.php?t=920275
Restore SD card after WP7 install
http://forum.xda-developers.com/showpost.php?p=10581621&postcount=1
emgodhth said:
I know I COULD look through threads (and that's what I've been doing), but I just want to cut to the chase without all that geek talk.
Click to expand...
Click to collapse
This is why your phone does not work. I flashed to WP7 from stock TMoUS WinMo and have not had any problems since. You have to read and understand what this geek talk means before you start screwing with your phone. I didn't know any either but I learned it thanks to all the tutorials and FAQs here at XDA. You can't do a heart transplant without learning anatomy first.

Help me plzz
I was having Windows 6.5 then i installed DFT Windows7 ... but i cant even connect to my Wifi from it... it really seems very tough to handle it.. as it cant even connect to my Wifi no Ph. nothing.... plzzz help what to do i cant do any thinks... it seems i wasted my Money on it...

coolbuddy1321 said:
I was having Windows 6.5 then i installed DFT Windows7 ... but i cant even connect to my Wifi from it... it really seems very tough to handle it.. as it cant even connect to my Wifi no Ph. nothing.... plzzz help what to do i cant do any thinks... it seems i wasted my Money on it...
Click to expand...
Click to collapse
it connects to routers fine, but unless you have the hidden wifi network app you cant connect to hidden networks, i suggest you try lowering the security settings on the router (disconnect your PC if you must) and try again, if it connects to an open network then you just need to make sure the settings are correct for WPA
its also worth noting that wifi not working at all, ie it doesnt see any networks is a typical sign of an SD card issue

thnx for the reply
dude but my wifi have no problem.. it connect to my laptop
and even in windows 6.5 and android
but it says : ph could not reach to wifi network
and i m replying frm my laptop using same wifi...
can u explain what to do clearly...

[Q] Can I recover my HTC HD2?

I was updating my HTC HD2 by following the recent article in MicroMart.
I had successfully installed SPL-2.08.HSPL.
Next, instead of updating the Radio ROM, I did the MAGLDR ROMUpdate (apparently successfully) and now when I switch the phone on it just hangs with the intial HTC screen.
I cannot connect it with the PC through Active Sync.
Apart from kicking myself is there anything I can do to recover?

go to bootloader and reflash magldr

But don't I need to get connected through Active Sync through Windows Mobile Device Centre?
How do I get the HTC HD2 to do anything?

Fuzz99 said:
I was updating my HTC HD2 by following the recent article in MicroMart.
I had successfully installed SPL-2.08.HSPL.
Next, instead of updating the Radio ROM, I did the MAGLDR ROMUpdate (apparently successfully) and now when I switch the phone on it just hangs with the intial HTC screen.
I cannot connect it with the PC through Active Sync.
Apart from kicking myself is there anything I can do to recover?
Click to expand...
Click to collapse
Try to flash the latest stock ROM via SD card.It will remove the HSPL and MAGLDR.

Fuzz99 said:
But don't I need to get connected through Active Sync through Windows Mobile Device Centre?
How do I get the HTC HD2 to do anything?
Click to expand...
Click to collapse
One more example in the pile of several thousand people confused by the use of the term "get an activesync connection".
it doesn't mean the program activesync, just a USB connection.
Enter bootloader manually. Connect USB, when word "serial" becomes "USB" you can flash.
Most winmo flashing problems are caused by the time taken for the rom.exe to reboot the phone into bootloader. Putting it in bootloader manually will save you about half a minute per flash, and practically nullify any timeout connection errors.

Giraff,
Thanks for the advice, but I would be grateful if you would tell me what file to put on the SD card.
Do you mean a file like "RUU_Leo_S_Orange_UK_3.14.61.2_Radio_15.42.50.11U_2 .15.50.14_LEO_S_Ship.exe"
which I then
- Rename to LEOIMG.nbh and copy to the root of a microSD card that's been formatted to FAT32
- Insert the storage card into your phone
- et seq?

Sam Samuel,
I've got USB on the phone, but I don't get access through Explorer.
Do I just execute the above RUU...exe file on the PC or put file
RUU_Signed_0409.nbh
on the SD card et seq.

that file, although it is an .exe file, is actually a zip.
to do an sd card flash
right click that file, and choose extract here, or perhaps unzip here, or unpack here, depending what archive program you have installed, if you cant see any options like that, install winrar or 7zip (theyre free)
It will extract to around 8 or so files, one of which, the biggest, is called RUU_signed.nbh and that is the actual rom file.
Take that file, rename it leoimg.nbh copy it to your sd card and reboot into bootloader, , teh flash should start automatically.
Or, since you have now connected to usb in bootlaoder, just double click
RUU_Leo_S_Orange_UK_3.14.61.2_Radio_15.42.50.11U_ 2 .15.50.14_LEO_S_Ship.exe
to run the flash over usb,
BUT
be aware that flashing this (or any 3.14) rom over usb whilst hspl is installed will mean it wont update the spl to 3.03.xxxx and so the rom wont work properly until you manually upgrade the spl to 3.03.xxxx using hspl4
Fuzz99 said:
but I don't get access through Explorer
Click to expand...
Click to collapse
no, you cant access teh filesystem whilst teh phone is in bootloader. This is why the update utility wont show you the 'from version' info, because it cant access the registry.

Or would I find it easier to put the file "RUU_Signed_0409.nbh" on the SD card?
I don't know what 0409 means.

0409 is the country code, not usually there, but nothing to worry about. yea you can do it sd card method if you like. it will only work if it is teh actual correct rom for teh phone, from sd card, , cant use hspl to get other stock roms on there with sd card.
If i were you tho i would have run the .exe as soon as 'serial' because 'usb' and i would know by now whether it works or not,,,, hehe.

Thanks for all the advice.
I will try again tomorrow.

samsamuel said:
One more example in the pile of several thousand people confused by the use of the term "get an activesync connection"
Click to expand...
Click to collapse
Just to add to this statement so people will better understand why Samsamuel phrased this this way. If you notice while in bootloader and the USB is present at the bottom of the screen, on your computer it is listed as HTC USB Sync.

Take the battery out and put the battery back on again. connect the usb to both phone and computer (2)hold the volume down button and press the phone power button . it will show USB Connection once it goes into magladr

Once I understood that plugging in a USB cable while in HSPL and seeing Serial change to USB on the HD2, I was able to flash the Radio ROM and proceed with the installation of Android 2.3.
All appears to be working now.
Thanks for all the advice.

[Q] Can't instal HSPL neither LEOIMG.nbh through memory card. HELP!!!!

My phone started having Issues ever since I installed Core Cell, I am not blaming one bit Core Cell i am just explaining, I used the windows 6.5.5 with android on my Memory card also from coredroid(none of the other sd roms would work). I got tired of windows 6.5.5 basically because my contacts from gmail would not upload to my phone in anyway possible and android coredroid did not work properly. Well now that i try to flash HSPL I am getting a fatal error, my
PB81120 SS-B3
SPL is 2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
when I run HSPL I get this message:
Critical ERROR
Flow:00000003
Error Code: 00000004
Description: Bad model ID!
when I run customRUU.exe i get this message:
ERROR [240]: File OPEN
The Update Utility can not open the requested file. please check your Update Utility.
I need help with this constant problem it is driving me insane! I do not know how to make this post one that I will if someone posts something to it, but if you could send me a message with some help also, on top of posting here that will be great!

SDcard
also when I tried to switch roms through my sd card using a LEOIMG.nbh my screen just says Loading.... and never goes to the place where I can select LEOIMG.nbh

Task 29
Also when I try to run Task 29(as administrator) the computer gets to the part where it says updating the ROM image on your PDA Phone... and my to the black screen with the letters htc in gray the percentage does not move at all neither on the computer and the phone. and then i get an error similar to when installing HSPL

eddygonzalez said:
when I run customRUU.exe i get this message:
ERROR [240]: File OPEN
The Update Utility can not open the requested file. please check your Update Utility.
Click to expand...
Click to collapse
are you running the exe as administrator? If not, try that way

yes I am running it as Administrator

When you connect to PC via USB does the word "serial" change to "USB" on the bootloader?
At what point on the process do you get this message?
I'm talking about the hspl process btw.
If you don't have the right hspl (2.08) nothing else will work.
Sent From My Fingers To Your Face.....

Here is a few suggestions for the OP.
One try changing USB ports, try all ports on your computer.
Uninstall ActiveSync/WMDC and then reinstall it, make sure you download the latest vsrsion from Microsoft.
Try deleting all of your USB drivers and letting them reinstall when you connect your HD2 to your computer.
Try another USB cable if need be.
Finally try another computer if you can.

Create a Gold-card. It will bypass CID checks and allow you to flash. Just search for the topic here on XDA. If you can't get this resolved, I can also write a custom CID to the board via JTAG for you to fix this problem.

connexion2005 i will create a gold card and see if that works Thank you very much i will let you know if it doesn't work. how hard is it to create a CID?

Gold card :_(
The Gold Card is not doing anything, every time I do Vol Down and power the tricolor screen pops up and then goes to the white screen where it says "loading...." in blue but it doesn't move from there.... what should i do in that case?

T-Macgnolia said:
Here is a few suggestions for the OP.
One try changing USB ports, try all ports on your computer.
Uninstall ActiveSync/WMDC and then reinstall it, make sure you download the latest vsrsion from Microsoft.
Try deleting all of your USB drivers and letting them reinstall when you connect your HD2 to your computer.
Try another USB cable if need be.
Finally try another computer if you can.
Click to expand...
Click to collapse
I did all of this still no luck, Is it something with my phone that is causing all this to stop working?

conantroutman said:
When you connect to PC via USB does the word "serial" change to "USB" on the bootloader?
At what point on the process do you get this message?
I'm talking about the hspl process btw.
If you don't have the right hspl (2.08) nothing else will work.
Sent From My Fingers To Your Face.....
Click to expand...
Click to collapse
so it goes to the tricolor screen and then goes to the page where it says it is loading and shows htc and the 0% bar and a few minutes later the computer shows that message and my phone stays at 0%.

So installed windows 7 in my new computer downloaded windows mobile device center 6.1 the latest version and I got a new usb cable and my phone is still having the same issues any ideas?

eddygonzalez said:
So installed windows 7 in my new computer downloaded windows mobile device center 6.1 the latest version and I got a new usb cable and my phone is still having the same issues any ideas?
Click to expand...
Click to collapse
I really hate to say it but I think you may have physical NAND problems. The NAND is where Windows Mobile or any OS that you flash to your HD2 is stored, or to help you understand it is where the ROM is flashed to when flashing a ROM. If the NAND chip has too many bad blocks it will not allow you to flash. seeimg as you have tried everything including a gold card, this is the only conclusion I can come up with. The only fix for a bad NAND chip is to replace the main board. Sorry to be the barrer of bad news.

T-Macgnolia said:
I really hate to say it but I think you may have physical NAND problems. The NAND is where Windows Mobile or any OS that you flash to your HD2 is stored, or to help you understand it is where the ROM is flashed to when flashing a ROM. If the NAND chip has too many bad blocks it will not allow you to flash. seeimg as you have tried everything including a gold card, this is the only conclusion I can come up with. The only fix for a bad NAND chip is to replace the main board. Sorry to be the barrer of bad news.
Click to expand...
Click to collapse
I guess I would just have to live with core droid windows 6.5 and android on my sd card. But do you know how to import contact from gmail to windows 6.5?

eddygonzalez said:
I guess I would just have to live with core droid windows 6.5 and android on my sd card. But do you know how to import contact from gmail to windows 6.5?
Click to expand...
Click to collapse
Look in the HD2 Android Q&A and General foum or the HD2 Windows Mobile 6.5 Q&A and General forum, I know I seen a thread on doing this in one of the two forums not too long ago. If you use search make sure to use advance search and select to only search thread titles, and if you can not find it through search than go page by page until you have went atleast 25 to 30 ages back just reading the thread titles. I am sure you can find it.

[Q] HTC HD2 white screen.... can not load orginal rom please help!!!

Hi there i am hoping somebody can help i have found alot of threads explaining the issue with htc hd2 white screen error but have not found a solution to help i have tried for days to load stock roms original telstra roms tried hspl3 i can not connect through windows mobile with usb and have tried flashing original roms via 4g sd card with no luck am i missing something i have tried RUU_Leo_Telstra_WWE_1.49.841.1_Radio_Signed_15.28.50.07U_2.05.51.11_Ship RUU_Leo_Telstra_WWE_1.72.841.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship i have tried to run through adminstrator i can not access the phone settings to turn on active sync so as far as i am aware i can not do anything through usb. i get an error msg when flashing via card and it terminates the update. Can anyone help with this issue i know there are many threads none have helped me.
Thankyou in advance

There are several possible reasons that the flashing process fails. Or, as it seems, the connection from your device to the PC - which might be a driver issue.
Normally, HD2 turns on ActiveSync if you want (you can select when a popup screen offers this) as soon as the device is connected to a PC through USB.
If the flashing process doesn´t run via SD card, there are also various possible reasons: Sometimes, cards bigger than 2GB don´t work, or your card is not formatted FAT32, or the naming of the ROM file is incorrect (should be leoimg.nbh). Or, your device is not a Telstra device after all?
Anyway, in order to help, there is more information from your side needed, otherwise, it´s a bit like searching a needle in a haystack.

Like tictac0566 said
Try 2gb sdcard - make sure its fat32 formated.
Make sure battery its not under 50%.
Most important Make sure the rom your are trying to flash its for your hd2 ( best way its to download from htc - web support with serial number ).

sd installation
i down loaded the rom. the oiginal rom is in exe extention. how do i used it to install from sd card. i gotthe rom from tmobile with serial number? where can i downlead the seperate rom file.. any link for .nbh file

The exe is actually an executable zip file. Rename it to. .zip from .exe and you can then open it with winzip or winrar or whatever,and inside you will find several files,one of which is ruu_signed.nbh which you extract and rename leoimg.nbh and flash with.

steps to flash through sd card.
i tried 3 stock roms even from tmobile web site. it gave me a radio error and terminate. what can i do it just wont install radio..???