I am an ex Blue Angel owner, and i have had the Wizard for about 7 months now, and the phone is perfect (size, battery, keyboard), however there is one problem that has been bugging me.
I use the standard case, as i like the format. however when i recieve a phone call and i remove it from the case, the screen 8 times out of 10 turns to landscape then back to portrait, and this prevents me answering the phone for 30 seconds or so until the screen turns back, as the hardware buttons dont respond. However i never figured what cused this, until i read through an unrelated post that it was caused my the magnets in the case. and testing this by waving the case over the surface of the phone reproduces this problem.
now i am stunned that they bundled this case with the phone, and i am in the market of looking for another without the magnets i.e snap button.
does anyone know of an an alternative case that is horizontal that has the same belt clip?
i have seen the Krussel Horizontal Case http://www.addonsworld.co.uk/product.php/21636/3384/, but i dont like the detachable belt clip. as i envisage the phone coming off it unlike a vertical case that has gravity and a low pivot point keeping it steady.
has anyone got any suggestions?
I've got the same probleme with my qtek 9100.
Hi Fuzzy [EDIT: and Alex],
some weeks ago I did a search for HTC Wizard on Froogle, and I found a lot of accessories: aluminium hard-cases, new styluses, loudspeaker mountings, modfied desktop stands...
Case-specific search:
http://froogle.google.com/froogle?q=htc+wizard+case&btnG=Search+Froogle
I am sure there is a case that fits your needs.
Greetz
Raubi
unfortunately i have looked through all the 8 pages of hits and there is not a case that is suitable. the nearest to what i want is a case made by sena http://www.senacases.com/cart/home.php?cat=413 however it itself has a magnetic clasp, so will most likely result in the same problem
I want a case like the original with same type of belt clip and without a magnetic clasp. Does anyone have or use such a case, or can confirm that the sena cases arent afflicted with the same problem.
Turn your phone over!!!
When you put the phone in the OEM case, have the screen facing your body (away from the magnetic clasp). This will accomplish 2 things:
1. Prevents the magnet from activating Landscape Mode.
2. Provide extra protection from direct impact for your screen.
I have always done this and never experienced the Landscape issue.
For me that doesnt work, infact it makes it worse i've just removed the phone like that from the case a few times and it change orientation every time. the magnet is contained in the flap and it triggers the screen change every time weather it brishes past the back or the front of the phone.
I have just bought the Krussell case from my first post after not succeeding finding an alternative, i think that with a belt clip it will be unsafe and will stick out much further than the original case, however it does have loops to loop belts through, so that may be the tradeoff i need.
I will let you know how i get on when i recieve the case next week.
what i am most surprised at is either HTC or the mobile carriers not picking up on the problem and selecting a different case.
but the one thing i have figured is that if the magnet is contained purely on the pouch and not the flap (i.e. the flap has metal in it) then this problem would not happen. and if i twisted the phone away from the case when removing it... and ...and ...and..... there would probably be lots of ways to get around it not happening, but in the real world in everyday use when i remove the phone it does happen and it causes me to miss lots of phone calls...
hello to everybody!
i got my xda trion 2 weeks ago. after one week, it was impossible to bring the stylus into the xda. so i got a new one.
after again one week, the stylus wont come out of the trion.
someone else prob's with the stylus?
greetings
karl
+ 1, probleme like a wizard too
same ting happened with my TyTN today...
+1 with one week old tytn
Same here...
First I couldn't get it out / then I couldn't get it in / then it would simply slide in-and-out freely to the point that only gravity was holding it in place (sorry if this sounds dirty, but this is what happened).
Had to have mine replaced. I've heard this issue has been around since the Wizard...
I really hope I don't have the same problem on TyTn #2!!!
After a few days of having mine suddenly the stylus was becoming enromously difficult to remove. At one point it just wasnt moving so after a forceful tug it pulled out and a tiny transparent square of plastic/rubber fell out with it. Looks like it was in there to keep it in place but i have no idea how to put it back in. Now the stylus removes fine and stays in place too :shock:
I had the same problem.
Could not get the staylus in with my TyTN.
So I did the mistake and pushed it in... a "knack" sound alerted me that something bad happened. Could not get the stylus in still... so I yanked a small rubber plastic piece from the stylus hole on my TyTN. Now I can slide easily the stylus in.
From teh reports I heard my guess is that the rubebr plastic inside the TyTN is used to firmly hold the stylus in. While without this rubebr plastic there is nothing to hold the stylus until you fully place it inside the TyTN.
andmjones said:
After a few days of having mine suddenly the stylus was becoming enromously difficult to remove. At one point it just wasnt moving so after a forceful tug it pulled out and a tiny transparent square of plastic/rubber fell out with it. Looks like it was in there to keep it in place but i have no idea how to put it back in. Now the stylus removes fine and stays in place too :shock:
Click to expand...
Click to collapse
Same here TyTN 1 week old.
same here,
think I'll swap mine over for a new one.....
raptorian said:
I had the same problem.
Could not get the staylus in with my TyTN.
So I did the mistake and pushed it in... a "knack" sound alerted me that something bad happened. Could not get the stylus in still... so I yanked a small rubber plastic piece from the stylus hole on my TyTN. Now I can slide easily the stylus in.
From teh reports I heard my guess is that the rubebr plastic inside the TyTN is used to firmly hold the stylus in. While without this rubebr plastic there is nothing to hold the stylus until you fully place it inside the TyTN.
Click to expand...
Click to collapse
Same here in 5 days
happend with me after 2 weeks. I've been struggling for a week, and now it's workng again! Don't know how long it will last. I hope it won't brake down, I bought Hermes thrue internetshop. Always sick to return things.
I carry something like this, and only use the tytn stylus in emergencies. I'm hoping this will reduce wear.
Same here - less than 2 weeks.
:shock:
Same here 5 days, luckley I had a replacment on order for BT problems recived that today lets see how this one goes.
me 2
my TYTN's stylus wouldn't stay in the hole.
i sent my tytn to be replaced (due to BT problems and screen alignment)
and i hope i t won't happen again.
when i put the tytn in the box to be sent so the stylus stopped falling :? )
that is odd
My stylus is a little difficult to remove at times, so I had a look down inside the stylus hole and it appears that there are three of those little pink rubber squares protruding from the side and a dark rubber 'socket' at the end to grip the tip when it's fully inserted. The pink squares are obviously there to provide a little more grip along the length of the stylus, but my guess is that even without them the 'socket' at the end would hold the stylus in place. I imagine that over time the pink rubber will either soften up or disintegrate entirely with the friction.
Solution stylus problem
I had the same problem with my stylus, my solution is take a Poster Buddy Brand name Pritt it is so called here in Holland you can place posters and photo's with it on wals, doors etc. looks like white rubber glue, think I see it in the UK with the name Sticky here you can buy it with photostores and bookstores etc. Take a small piece of it turn it between your vingers to a small ball and put it in the stylus hole after that push it to the end with your stylus.
After I do this I have no further problem with the stylus it works great.
Same issue here... the 2nd day I had it a small transparent square rubber went out of the stylus hole. Now i can put it in and out without problems...
Loose/Jammed Stylus
I'm afraid sending device back for replacement/repair for the stylus problem and loose locking keyboard may only be a temporary fix. Having had my device dismantled I can see exactly what the problesms are with both stylus and keyboard.
For the stylus there is a small block of clear plastic designed to create a friction lock to stop it falling out. There is luckily another small plastic spring lock at the far end so if the stylus is fully in it should click in and not drop out even without the plastic block. The problem is that the plastic block is not held firmly in its slot and as it gets loose creates far too much friction against the stylus which can then drag it right out.
The loose keyboards are due to the metal runners (that you see on back of keyboard partially springing apart (breaking tiny micro welds) at the ends where they lock (or not!) open and closed. These runners if they have sprung open like this will never lock firmly again unless you perform a bit of DIY.
I have performed small operations to fix both these problems and my Keyboard now locks very firmly both open and closed. The stylus issue is dealt with internally with a felt runner at a specific location. BEWARE of course performing these operations will invalidate your warranty. I can be much more specific for anyone who wishes to contact me directly particularly with the keyboard issue which requires quite a chore in dismantling the device - though I can now perform this in half an hour start to finish (Not something I'm proud of with a new device, but I had to workout just how to do the fixes!! )
Actually otherwise I think TYTN is great - superb in fact which is why I did not send it back for repair - couldn't bear to be without it!.
PS Finger around the screen method works every time for me forget all that align screen caper.
Mike
@mikechannon: Do you have high quality pictures of disassembled device where we can see the chipset references? we need to gather information on the hardware used inside the Hermes...
I'm wondering, can the phone be flipped around in the holster? Like in all pictures I've seen, when you put the phone into the holster the phone screen is facing the holster. Is it possible to flip the phone around so the screen is facing outwards?
And is it stable/secured in the holster like that?
CZ Eddie said:
I'm wondering, can the phone be flipped around in the holster? Like in all pictures I've seen, when you put the phone into the holster the phone screen is facing the holster. Is it possible to flip the phone around so the screen is facing outwards?
And is it stable/secured in the holster like that?
Click to expand...
Click to collapse
It can be done but it's definitely not secure. They make it to hold the phone with the screen in against a felt-like lining to help protect the screen. Turning it around removes that protection. Also, although it can be done, the phone doesn't fit near as well as it does the correct way. The spring clip on top also partially hits the top of the screen. So I would nor recommend it.
Hi guys, yesterday I've repair my broken d802 (headphone jack broken) and everything goes fine.
But, while I starting to close the back cover I've notice something strange:
a lot of paper clip and needles I have on the desk start to get attracted by the phone, in a first place I thought it was normal (speaker has a magnet) but the magnetic field is near the camera.
Also with the back cover on, it still attract a bit paper clips.
It is normal?
Does your d802 do the same?
the exact place is just some millimetres above the camera.
Thank you in advance
Mine does the same, must be some component that causes this..
so it's not my fault while I was trying to replace the part
Don't think so, but I've previously replaced my screen so it could be different from original parts?
I had my G4 on my desk and noticed a paper clip stuck to it. I tried again when I was home and a safety pin would be magnetically stuck to this specific spot near the camera. No where else on the phone seems to do this. Does anyone know why there seems to be a magnet in the phone?
because in the same area on the the front of the phone is the speaker/earpiece's magnet.