Database Users

[Q] Status LED ?

I tried looking in the forum for any info on the status LED next to the speaker on the front side but I don't see any posts on this. Is this LED supposed to flash or do something? On my HD it has never worked? Is it supposed to work?
I remember on my Artemis it would flash green for good reception, blue for bluetooth and red if the battery was low.

FrancoBollo said:
I tried looking in the forum for any info on the status LED next to the speaker on the front side but I don't see any posts on this. Is this LED supposed to flash or do something? On my HD it has never worked? Is it supposed to work?
I remember on my Artemis it would flash green for good reception, blue for bluetooth and red if the battery was low.
Click to expand...
Click to collapse
I may be wrong but i was under the impresion that this was a sensor rather than a LED.

No, that's entirely correct, it is the light sensor. The LED is in the power button.

the status led is on the power button on the top right hand side of the blackstone...the place u highlighted is a sensor as what scotia has point out..

I think that it is a proximity sensor used to blank screen when you put the phone on your ear to talk.

It's actually the light sensor used for when you have automatic display brightness enabled. When it's dark, it turns down the brightness... And when it's a sunny day it cracks it up. I am not sure whether it's used to blank the screen during a call... This seems to happen after a period of time has elapsed.
Gav

ok thanks for the info.
So does the power LED on the top side flash any color to show the status of the reception or does it only light up orange when it charges?
Thanks.

doesn't do anything for reception..although mine flashes green hen I have a message/email/reminder
pity though, a decent LED to show such things was probably high on everyone's wishlist

No, the HD is perfectly unobtrusive. On my last PDA the LED had to be tweaked to stop flashing.

Too bad this isnt a LED diode Since I got on my Diamond a light notification (on the bottom of device)... when I recieved new sms... now on HD there is no way I can figure do I have new sms or notification unless I turn the screen on. The only hardware flaw by mine opinion

When its lying down, I agree with you. Then I have to turn on the screen. However when its lying next to me I'm usually not in a place were I can't use my phone, so the sound is on anyway.
I actually think its quite good the LED is on the top, it's easelly visible when the phone is in my pocket. I just have to pull the phone up a little and look down to see the LED (no need to get it out and turn the screen on). I like it on the top, nice and discreet, and not anoying me when I'm looking at the device while using it.
Perhaps a combination would be nice? Front and top That would sattisfy most people I guess...

2nd status LED?

Does anyone know what the deal is with the 2nd status LED, the one on the left of the earpiece. What is it for?

Thats the bluetooth LED.

my bluetooth is on, and ive never noticed it blinking. under what circumstances does it blink?

Ive wondered this same thing ever since Ive gotten this phone... I have never seen it blink and with bt the right one is lit for me...

I activated my phone yesterday and received maybe 30 or so texts since then. The notification light only lit up after one of them, which i received a few hours ago. When I got the phone I just assumed it would light up for texts like my g1 did but after it didnt i was disappointed.
So, is the green light on the right supposed to light up for text/email/voicemail/etc...notifications? thanks and sorry for asking such a stupid question and doing it in the wrong thread

The light sensor is on the left, LED on the right. If you put backlight to auto you can test by coverint the left side.

is there even an auto for brightness?or is it during calls only?
confused

i don't have this backlight auto settings.
where can i enable that?
i just have a slider where i can change the brightness manually

yeah where is that setting for auto backlight, i would love to have that.

Settings -> Display -> disable Auto Brightness, and tap it off..

i dont have that.
maybe the mytouch didnt come with that sensor?

me neither.
i dont have that option there.

bonesy said:
The light sensor is on the left, LED on the right. If you put backlight to auto you can test by coverint the left side.
Click to expand...
Click to collapse
dude, as far as I know the Magic doesnt have any light senson.
the option quoted above doesnt exist

I don't think so
This has been the second time I have heard the one on the left is a light sensor by two different people , Maybe it is a light sensor but maybe some of the stock versions of android like mine {Vodafone UK 32B board} currently doesn't support the hardware??

I can see both the LEDs alright but the there is no obvious way to set the one on the left as far as I know.
Italian (TIM) HTC Magic (32A).

i now upgraded to hero rom and voila, the option is there.

bonesy said:
The light sensor is on the left, LED on the right. If you put backlight to auto you can test by coverint the left side.
Click to expand...
Click to collapse
Which model do you have? As far as I know, the Hero is the only device that has the light sensor, that's why the auto-backlight feature is only available in the Hero roms and not the stock Magic/Sapphire/MyTouch roms... I don't even think that the other thing is an LED, it looks like one but I'm sure I read somewhere that someone opened up his device to check and noticed that there are no wires connecting it up to anything!

snudel said:
i now upgraded to hero rom and voila, the option is there.
Click to expand...
Click to collapse
does it work?

The Magic/Sapphire does NOT have a light sensor. The Hero is currently the only Android device with a sensor thats why you see that option with a Hero ROM.

no it doesnt work. as my predecessor already noticed

Dual LEDs on Hero - CDMA

I have a CDMA Hero from sprint in the US and am wondering if it has dual LED notification lights. I have read in lots of places that it does but am wondering if it actually has dual LED since my notifications only light up the left side. From the dash 3G I remember that the LED on the left was an LED and the one on the right side that looked like an LED was actually the light sensor. I also know that the Hero is supposed to have a light sensor. Just curious, thanks for any help.
::crosses fingers and hopes for Dual LED::

I think (I don't have a Hero yet, I'm just going off the online documentation for it), that the trackball acts as the second indicator "LED", but there isn't one on the right side of the earpiece, only the left. The trackball flashes when you have an incoming call or a notification.

sounds like it's the other way round from the GSM one then...the GSM has the LED on the right and the light sensor on the left.

no Dual LED's
I also have a sprint hero. The left led is the only one that flashes. It doesn't change color either. And the track ball does light up if u turn it on in the settings. As for the second led on the top right, it is definitely the light sensor. U can test it for yourself by putting your finger over it, and watch the screen dim.....

the one on the right is the light sensor.. cover it and it goes dim.

dbroadus2007 said:
I also have a sprint hero. The left led is the only one that flashes. It doesn't change color either. And the track ball does light up if u turn it on in the settings. As for the second led on the top right, it is definitely the light sensor. U can test it for yourself by putting your finger over it, and watch the screen dim.....
Click to expand...
Click to collapse
The LED on the left will change color and flashing pattern depending on your battery life and whether you have notifications or not. No notifications, no light (at least from what I've seen). If you're low on battery, the light goes yellow, and if you're within the 10-15 min boundary or less for battery life, light blinks red.

Thanks for all your help and I didnt realize that I had auto backlight disabled must have done that the first day I was messing with it all, I see now how the sensor reacts to having a finger over it. I would have enjoyed dual LEDs up top but oh well. Any way to customize the color of notifications, tried the handcent but it doesnt affect the LED at all or the trackball light for that matter. Going to try missed call or sms popup later to see if I can get some better results.

dbroadus2007 said:
I also have a sprint hero. The left led is the only one that flashes. It doesn't change color either. And the track ball does light up if u turn it on in the settings. As for the second led on the top right, it is definitely the light sensor. U can test it for yourself by putting your finger over it, and watch the screen dim.....
Click to expand...
Click to collapse
where in the settings can you turn the trackball on to flash? I cant find it anywhere except on Handcent app. Still doesnt flash though on mine for text

erasmogjr said:
Thanks for all your help and I didnt realize that I had auto backlight disabled must have done that the first day I was messing with it all, I see now how the sensor reacts to having a finger over it. I would have enjoyed dual LEDs up top but oh well. Any way to customize the color of notifications, tried the handcent but it doesnt affect the LED at all or the trackball light for that matter. Going to try missed call or sms popup later to see if I can get some better results.
Click to expand...
Click to collapse
I meant to say it does not change colors for notifications lol....but good info though.

ratchetjaw said:
where in the settings can you turn the trackball on to flash? I cant find it anywhere except on Handcent app. Still doesnt flash though on mine for text
Click to expand...
Click to collapse
I read somewhere the flashing trackball doesn't work on our CDMA Hero

That would make sense since I can't seem to get my trackball to flash, what a bummer. Hopefully we can get root or a software fix soon.

T-Mobile DASH 3G Led Indicator Lights
I have a T-Mobile Dash 3G. The left LED light is NOT flashing, and I would prefer that it does. I upgraded to WM 6.5 and I think that is what disabled the LED since I have seen videos on youtube where the indicator does flash.
The LED does glow orange and green when i am charging though.

Err I think you may have the wrong forum. This is for the HTC Hero, which runs Android not WM. Why not try starting your own thread in the correct Forum as you are more likely to get an answer there?

HTC maple LED?!

ok i was wondering... why is there two LEDs on HTC maple and only one is being used

I noticed that too. There's got to be an app that allows you to customize how they blink. I used an old one for HTC phones but is not compatible.

I'm pretty sure the "light" on the right side of the phone is the sensor that automatically dims the backlight if you have the option turned on. I don't think it's an LED at all.

I think that there is only one LED diode exactly on the left side on the right side is a light sensor.

http://forum.xda-developers.com/showthread.php?t=680231

I didn't see anything about the second LED from that link. So does this mean the other LED will not blink?

It's not an LED.

jinbuster said:
ok i was wondering... why is there two LEDs on HTC maple and only one is being used
Click to expand...
Click to collapse
The left side is a bi-colour LED with (maybe tri-colour) but so far I have only seen green and orange. Red maybe the third colour. Unlike the HTC Hermes 200 (Tytn) that had a second LED that was flashed blue when the bluetooth was active, the HTC Maple does not seem to have it. The right lens is actually a light sensor for the keyboard backlight *IF* you wish to use that feature which quite frankly SUCKS as I can't see anything most of the time because it doesn't switch on the backlight when you really need it.

I would prefer if it actually controls screen brightness. I wonder if there's a patch for that?

astrise said:
I would prefer if it actually controls screen brightness. I wonder if there's a patch for that?
Click to expand...
Click to collapse
Doubtful as it only seems to be a on or off command and not a on at level command. I just wish that it would be adjustable for light level setting as it never comes on in low light conditions when it should unless you cover it with a finger.

Notification light

anybody working on or considering making notification light using the capacitive buttons on the bottom? is it possible to use those leds as a notification?

That would be an awesome solution...
To use as notifications OnLY the capasitive buttons and not all Screen as "NoLED" app...
+1 from me...

+1 I also agree
and maybe a stretch and maybe you guys dont agree but you could also have each button be a different notification, ie:
text message the back button would light up, email the menu button so on and so fourth

+2 for this idea

It's already been done for the galaxy s's, BLN requires a custom kernel though.
I prefer NoLed, in the market, works great for notifications. NoLed

Im thinking about getting a Nexus S.
The only thing stopping me is the lack of notification LED.
It would be pretty good if this could work.
And being able to tell if its sms or email etc from which button lights would be very cool. But i would think the backlight is just one big light.
I've had a look at NoLed, but it doesnt seem ideal. If i get a notification while im asleep, the screens going to stay on for up to 8 hours non stop? That doesnt sound good.
Also it seems to mess with the lock screen and wake up of the phone.

So i just noticed today when pressing the capacitive button, it turns off. that likely means each one is lit independently from a separate LED correct? so if thats the case, theoretically each led should be able to flash independently?

terryhau said:
Im thinking about getting a Nexus S.
The only thing stopping me is the lack of notification LED.
It would be pretty good if this could work.
And being able to tell if its sms or email etc from which button lights would be very cool. But i would think the backlight is just one big light.
I've had a look at NoLed, but it doesnt seem ideal. If i get a notification while im asleep, the screens going to stay on for up to 8 hours non stop? That doesnt sound good.
Also it seems to mess with the lock screen and wake up of the phone.
Click to expand...
Click to collapse
From what I read... the NOLED app works well with the AMOLED screens because blacks dont use power. It basically turns on for that single notification or something like that.
You should read more about it from the vibrant sub forum.... with both having AMOLED screens.

azn2050 said:
From what I read... the NOLED app works well with the AMOLED screens because blacks dont use power. It basically turns on for that single notification or something like that.
You should read more about it from the vibrant sub forum.... with both having AMOLED screens.
Click to expand...
Click to collapse
Correct, in amoled screens the only pixels drawing power are the ones that are being lit for the notification. You can also set the notifications to timeout after a certain amount of minutes, and can also set a "sleep time" so there no notification while you're sleeping at night. Another awesome feature is the use of the proximity sensor, so that if the phone is in your pocket it doesn't turn on the notification but once you take your phone out of your pocket the notification shows up on the screen.
Check the devs thread for more info:

integra891 said:
So i just noticed today when pressing the capacitive button, it turns off. that likely means each one is lit independently from a separate LED correct? so if thats the case, theoretically each led should be able to flash independently?
Click to expand...
Click to collapse
This is EXACTLY what I hoped was going to be possible.

integra891 said:
So i just noticed today when pressing the capacitive button, it turns off. that likely means each one is lit independently from a separate LED correct? so if thats the case, theoretically each led should be able to flash independently?
Click to expand...
Click to collapse
You would think this would've the case but not exactly. The galaxy s does this also but it is not possible to activate the leds separately
Sent from my Nexus S using XDA App

matt_stang said:
You would think this would've the case but not exactly. The galaxy s does this also but it is not possible to activate the leds separately
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Yes, I was also thinking this too but could there be some sort of app written making it believe all other buttons were "pressed" so their lights were off once a notification came in? I strongly believe ANYTHING can be changed with a few smart edits I mean people here on XDA bring multi-touch and FM radio's to devices that shouldn't have those features!
Even if you could have each notification have a different light dimmed as if it were being "pressed"
As in: Text message= all lights lit BUT the home
Voicemail=all lights lit BUT the back button ETC...

If they could be seperate that would be great but honestly even if it's all of them it's good enough for me, I just wanna see SOMETHING if my phone is just sitting there

ikon8 said:
It's already been done for the galaxy s's, BLN requires a custom kernel though.
I prefer NoLed, in the market, works great for notifications. NoLed
Click to expand...
Click to collapse
NoLED is ok except for 2 things for me.
1 - I don't like the dots/icons hopping around the screen. I would rather they were just lined up across the top or the side.
2 - It plays around a bit much with turning the screen on and off.
Looking at NoLED there is NO reason why he couldn't make it act exactly like the Notification LED for the Ball on the Nexus One. Just have different colors for different notifications and rotate them on the same cluster of 4 LEDS on the top right of the phone.
Boom you have rotating colored notifications simple and effective
I wish I was better at coding stuff...haha

I'm glad there is a thread going about this!
Sent from my Nexus S using XDA App

You couldn't be anymore on point man. The jumping about is slightly unprofessional.

hopefully well see some work towards this once some custom roms start coming out

The reason the notifications move around the screen is so that it doesn't burn out those pixels.

dudeimgeorge said:
You couldn't be anymore on point man. The jumping about is slightly unprofessional.
Click to expand...
Click to collapse
Yes I agree, it would be amazing if they just slid around your screen or drifted all over. OR a pulsing light pops up on the screen just like a virtual trackball like the nexus one!

sassyness77 said:
Yes I agree, it would be amazing if they just slid around your screen or drifted all over. OR a pulsing light pops up on the screen just like a virtual trackball like the nexus one!
Click to expand...
Click to collapse
clearly you guys do not understand why it jumps around so unprofessionally
do you want burned out pixel?