Related
Wazzzzzzzzaaa???
This is my first C# util!
It facilitates ExtRom update process. All you need to do is to put your cab files to Ext and run this utility, then the utility will create Config.txt at Ext with all cabs specified as "CAB: path2cab". If you need to get your original Config, then check ConfigOld at Ext
C# Programmers let's unite!!! ))
ps: the utility is not verbose one, so you won't see any messages & lame stuff. If you see something, then there is a problem
that's good boy! will try it l8r..
THANKS!
Man, wher z feedback?? Did u try it?
Yo,
boobee said:
that's good boy! will try it l8r..
THANKS!
Click to expand...
Click to collapse
Boy, hope you finaally tried it! And try this one also. This is my 2nd C# util
Shortly what it does:
UnZips your files with consecutive registry values (reg V4) import and splash writing
It means that you can zip all your files to one file called Setup.zip and place it anywhere (storage/ext). After hard reset, the utility is called and it extracts all your files and restores your favorite registry settings (saved to Setup.reg) and writes your splash.
btw: read za manual !
ps: the concept is the same, if u see somethin' then there is a trouble
Re: Man, wher z feedback?? Did u try it?
Attention!
The file was re-uploaded, so there mustn't be any CRC errors now
System Requirements
Regarding system requirements, the program needs old version of ER\Autorun.exe that understands ER\Config.txt
Program was not tested on XDA1! It was partially tested (w/o hard-resets on XDA2 / 1.72TM
Version 1.1
Wazzza!
Here is a new version of Restorator utility. The new features are:
+ now it deletes content of \My Documents;\Windows\Start Menu;\Windows\Startup folders (as people wanted
+ TimeZone offset is not resetted anymore
Note:
Make sure you have prepared your customized Start Menu (!!!) and Startup (!!!) folders, otherwise you won't be able to see Programs after hard-resetting your device. Please, check the attached sample to prevent yourself from having problems with this utility or use version 1.0 that don't delete anything
Umm... could anyone translate this into English for me?
I don't even understand the title of the thread.
In another thread, SP says that one of these downloads will retrieve data back on hard resets. Sounds like a useful tool, if only I understood what the hell these posts mean. :lol:
For Ben
sublimatica said:
Umm... could anyone translate this into English for me?
Click to expand...
Click to collapse
Here we go...
(assuming that you downloaded 'RestoreItV1_1_PPC.ARMV4.CAB' & installed it to your device)
This program is designed to restore your files, folders and registry settings from a ZIP-format archive and it can also write some splash screens
For this purpose, you need to make a ZIP-format archive with files & folders you want to get restored after hard-reset. Just run your favorite pocket zip archiver (for instance PocketRAR) and archive those files & folders that you want to see after hard-resetting device. Name your archive "Setup.zip" and place it to one of the following places: storage, storage card or extended rom.
Before doing further instruction make sure you have unlocked your ExtendedROM using ExtUnlocker.
If your rom is unlocked try to run the utility from \Storage\RestoreIt. If you had no messages after running it, then the utility installed itself successively. And your files & folders placed to 'Setup.zip' will be restored on next hard-resets.
If you're interested in restoring registry settings, then you need to get pocket registry editors that support exporting/saving to .reg files. After saving your favorite registry settings you will need to combine them to one .reg file and name it 'Setup.reg'. Then, you will need to place it to your archive's root folder (aka '\') So, you will have a file 'Setup.reg' placed to the root folder of your 'Setup.zip'. That's all folks
I strongly recommend you to see sample 'setup.zip' & 'manual.txt'
DON'T FORGET TO PUT YOUR CURRENT '\WINDOWS\STARTUP' & '\WINDOWS\START MENU' FOLDERS TO YOUR SETUP.ZIP!!!
You're welcome to ask me questions anytime!
Aaah, OK. That makes more sense
Sounds like a handy little tool then. Might have a play later.
Thanks, SP!
RAR-support
Is there anyone who is interested in rar-support for restorator?
Attention: Restorator v1.0 & 1.1
Attention: Restorator v1.0 & 1.1 are originally supported by I-Mate 1.72! All you need to do here is to use Extended ROM unlocker prior to running the utility
Feedback
Any feedback so far?
SP,
Restorator seems like a winner!!! I have been hitting my head on the rocks for a while trying to script a recovery using nscriptm as a scripting tool to call cab files which I keep on a storage card. Looks like using your tool a lot of the tedious scripting can be simplified by simply copying the files where they need to go. The challenge is knowing exactly what to copy & where... Is it possible to add the ability to call CAB files to your already excellent utility?
I am imagining putting all the CAB files in say a folder like \CABs in the Setup.zip and then having Restorator calling them one by one after finishing off with all else that it does. Can this be done? Additionally can you add ability to call registry imports at two points? You may wish to call registry import at the beginning and once more at the end after all cab file execution has been completed. This would be useful to restore application settings etc which the cab execution would overwrite to default. You would obviously need to keep two .reg files in the zip file. Does this make sense?
Thanks once again for all your efforts. Regards
Hi Mate
k_kirk said:
SP,
Thanks once again for all your efforts. Regards
Click to expand...
Click to collapse
Thanks for your motivating feedback.
I'm planning to put your features in 3 to 5 days...(hope to get some free time on these days).
And more ideas and recommendations are welcome!!!
SP
SP, thanks for continuing to work on this utility. I am waiting eagerly for your next update. I will set it up and test it with a hard reset so we can see real outcome. Let me know when ready please. Thanks
Re: Hi Mate
SP said:
k_kirk said:
SP,
Thanks once again for all your efforts. Regards
Click to expand...
Click to collapse
Thanks for your motivating feedback.
I'm planning to put your features in 3 to 5 days...(hope to get some free time on these days).
And more ideas and recommendations are welcome!!!
SP
Click to expand...
Click to collapse
Hi SP, this utility sounds great. Does it work with the XDA I as well????
Re: Hi Mate
Hi SP, this utility sounds great. Does it work with the XDA I as well????
Click to expand...
Click to collapse
Unfortunately I don't have an XDA 1 device at my disposal and I'm unfamiliar with its tech info.
What happens when your xda1 is hard resetted? Does it install cab files? or does it run any configuration software?
If there is a such software (on XDA2 it is autorun.exe placed at ExtendedROM), then you must specify in the runner (which starts on hard-resets) the call to the restorator utility
Looking forward to assist you in porting restorator for XDA1 devices
Cheers
Hi SP. Just dropping by. Any news on new version of Restorator? Cheers.
Restorator V1.2
k_kirk said:
Hi SP. Just dropping by. Any news on new version of Restorator? Cheers.
Click to expand...
Click to collapse
Sorry for the delay...
I'm having lack of time now, thus I couldn't test it very well . Just let me know if you found some bugs...
Now you can create "\CABS" folder and place your cabs there. They will be processed after extraction and before registry import. So, you don't need to have two .reg files then.
I'm looking forward to your new ideas!
ps: another attachment is a set of registry settings splitted by .reg files. I'm using them to get my setup.reg. Just change what you need, delete some of them and run "make.bat". It will create setup.reg with all your settings.
btw, check out "Usher_-_Yeah_[44k].wma" & "Maroon5_-_This_Love_[64k].wma". Home-made ringtones ;-)))
for those who hadn't used Restorator before. !!! DON'T FORGET TO PUT YOUR "START MENU" & "STARTUP" FOLDERS TO THE SETUP.ZIP !!! AND READ DA MANUAL!!!
Cheers
SP,
I tried the Restore-It utility today and found that the earlier functionality of copying files & importing registry etc from setup.zip works quite well.
The \CABS folder was also restored onto my device so I guess thats an indication that my setup.zip file was contructed properly. I am sad to report that none of my cab files were triggered by Restore-It though. I think there is a small bug thats holding back this behaviour.
Your kind assistance to check & correct this will be most appreciated.
Thanks & Best Regards
the way to OS Localize your Universal
*****the files and tools you need*******
*imgfs_tool by mamaich
*boot_hv_tool by mamaich
http://forum.xda-developers.com/viewtopic.php?t=34171&start=0
*HTC-64 Encodetool by bal666
http://forum.xda-developers.com/viewtopic.php?p=191164#191164
*hex editor (i used Heiw32 accroding to suggestion of Mamaich)
*NotePad in Windows
*Other high performanced Editor(if you have)
*Resource Hacker or PE Editor + Resource Tunner to edit mui
*Signcode.exe and sign with certificate
-----sorry can not write all in here,,, pls go to link---
http://www.asukal.jp/WM5_MUI/the way to OS Localize your Universal.mht
***********additional information 2006-May-15**********
regarding to initflashfiiles.dat and initboji.dat
i tired to write initflashfiles.dat in Japanese chalachtor, but not in CODE,
seems to work.
*write initflashfiles.dat in Japanese to specify Japanese Localized shell folders and Japanese re-named Short cuts. then add into rom.
also deleate both of 2 old dat files from rom.
then flash it back to my Uni, the localized shell folders were created!
this can save a lot of time to create the Localized ROM :shock:
But,,, still testing that ROM can work correctry.......or not.
<some appurication buttons can not assained if without initboji.dat>
*************2006-May 22 aditional********************
@ to edit the dll or exe from AKU2 rom, they have some difference.
Strings can be edited only with Platform Builder now.
pls reffer to this thread
http://forum.xda-developers.com/viewtopic.php?t=49423&highlight=
Can I have your instructions?
Hi Asukal(sama):
I'm trying to localize my Universal to my local language.
I'm stuck now before boot set-up process after hard reset.
So, I would like to ask you several questions.
Could you show me your instructions / suggestions?
1) Certification Store (way 2-1)
You said I have to take out CertificationStore from registry file.
I could not find any key of "CertificationStore", so I compared my registry before and after SDK_Cert installation.
I found there are some differences in registry file, which are:
HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\SPC\Certificates\XXXXX] –- 3 keys
HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\Privileged Execution Trust Authorities\Certificates\XXXXX] – 3 keys
[HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\Unprivileged Execution Trust Authorities\Certificates\XXXXX] – 2 keys
I removed "\" that locates on each line of hex data and write these keys on default.hv file.
However, the start-up process just after hard reset didn't start...
I also found some other differences on registry files, which seems certification file update time.
Do I have to put update time keys on default.hv file?
Or am I still missing something?
2) MUI (way 2-2)
I could sign *.mui files with SDK_Cert.
You said PE header must be corrected if I cannot sign *.mui.
In other words, you mean I don't have to correct PE headers because I can sign my *.mui?
As far as I checked my *.mui files, it seems OK.
3) iniboj.dat (way 3)
I could dump iniboj.dat and initflashfiles.dat and translated them to my language.
Of course I saved in Unicode (UTF-16) and removed the first 2 byte "ff fe".
When I run "delfile.exe", I noticed "delfile.exe" showed the error message that "delfile.exe" could not find iniboj.dat.
But I could add iniboj.dat with "addfile.exe".
Is this a normal message from "delfile.exe"? FYI, my base ROM is Qtek's AKU2; 1.30.77.
4) *.hv files (way 4)
I think the following is the keys that I must change.
[HKEY_LOCAL_MACHINE\System\Explorer\Shell Folders]
"StartUp"="\\Windows\\StartUp"
"Recent"="\\Windows\\Recent"
"Programs"="\\Windows\\Programs"
"Favorites"="\\Windows\\Favorites"
"Desktop"="\\Windows\\Desktop"
Even I changed these keys, I cannot start my start-up process...
Are these keys enough to start start-up process?
I appreciate any suggestions / supports / instructions!!
Thank you.
hi! Camrade!
Re Qeuestions
1;certificate sotre. 3 entries are correct.
@But i am not sure what you removed???
i did not remove any thing and copy it to HV.
@yes update time must be in HV also.
like follows.
without this. no work as sertificate authentification.
[HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\Privileged Execution Trust Authorities]
"UpdateTime"=hex:\
00,e0,46,50,1c,96,c5,01
2;if your mui can be signed, they should be workable.
but i am afraid your mui of core-dll Strings Table were broken.
PLS reffer this thread about that!
http://forum.xda-developers.com/viewtopic.php?t=49423&highlight=
if you are not sure, pls send me one of them to check it.
3:re-iniboj.dat, as you told me the eror message of delfile.exe will notice you, because i doesnt exisit in rom files. it was in XIP area.
But dont mind that. procceed it!
4;Shell folders; that is enough in hv, to just specify the loaction of Shell folder.<this also discribed in shellres.dll.
But no start up menu if there were localized Shell folders by failed initialized 2 dat files.
@the os can boot even the shellres.dll.xxxx.mui is not worked,
just missing Programs in StarMenu.
Now i am afraid your shellres____mui is read by OS, but it was incorrect.
@to change the Dr.Johnson screen to Japanes one, replace "stylus2.192.gif" and "stylus1.192.gif" with ones from JP os.
But the fisrt sentence before Stylus work for Dr.Johnson is from Shellres.mui, so your are failed in to read shellres_mui if it was still english.
Good luck!
Almost completed
Thank you, Asukal!
With your responses and instructions, I can finally boot my Universal with my language from boot screen!
I’ll make init*.dat file and try to make more localized ROM.
It seems a little difficult (complicated) to make initflashfiles.dat file translating to Unicode character code. But I’ll try!
Again, Thank you very much!!
shugoh
pls try to write iniflshfile.dat in Katakana, instead of Code,
i did try this some part of them just now.
Seems to be worked. But not sure .........didnt test all of in this dat,
just a part of it.
if the Katakana written dat was workable, it will be so easy to create
the Shell folders in Japanese................ :lol:
Hi Asukal,
I also want to join but I don't have the hex editor....the process is so complicated and the "key" is we have you on this website that do cook the ROM for us. Thanks a lot again.
If you have invented some easy installation files that want me to try, please let me know. I tried to edit the latest O2 ROM but unsuccessful....
Cheers,
chris_khho said:
Hi Asukal,
I also want to join but I don't have the hex editor....the process is so complicated and the "key" is we have you on this website that do cook the ROM for us. Thanks a lot again.
If you have invented some easy installation files that want me to try, please let me know. I tried to edit the latest O2 ROM but unsuccessful....
Cheers,
Click to expand...
Click to collapse
free hex editors can be downloaded.
many kinds of hex editors were in web.
Anyway, if i need something need test, i will call u! :lol:
Hi, Asukal:
This my be very stupid question...
I could translate html portion of shellres.dll with your instruction.
However, I still cannot do of tapres.sll and tshres.dll.......
Maybe this is because the type of resouce is different from shellres's.
So I tried to move html of tapres and tshres to another resources using PB because the other tools I have doesn't work...
When I wanted to save modified resource on PB, PB said I could not save the new resource because PB could not load resources from executable file...
I know this question is the basic one if I want to use PB.
But if you can show (a) hint(s) to me, I would appreciate your support very much.
Thank you!
shugoh
i guess PB can only save the files as "*****.exe" or "******.dll",
but not as a "******.dll.xxxxx.mui"
so you must save it as "anyname_you_want.dll" with out xxxx.mui to other folder.
then go to next step, because files edited with PB can not to be signed.
To enable to be signed, go following steps.
1;Open "any dll" or exe which havs correct PE header with Restorator.
2;Dlelete all of resources from this dll or exe.<make empty dll>
3:On another window of Resotrator ,
Open "anyname_you_want.dll" edited and save by PB
4rag and drop all resources exept "255" resource from
"anyname_you_want.dll" to "empty.dll"
5;save this empty.dll filled with resources of "anyname_you_want.dll",
as the name of your tagert xxxx.mui
6:Close all windows of resotrator.
7;try to sign on that mui, you may able to sign on that!
Good luck
Thank you for your instruction about PB and html.
however, I still cannot save modified file even though I put file name with *.exe or *.dll.
As my test, I opened x86 file and modified its file and I can save the modified. But still cannot tapres and tshres.......
I also tried some WM5 files, but not succeeded in saving it...orz
I installed all PB functions but for MIPS or SH4, which should not necessary for WM5.
The attaced is the error massage appreared when I wanted to save modifed WM file. (I installed Japanese PB, so error message is in Japanese)
"ta.dll" is only a temporary name for modified tapres.
I appresitate your any comments.
Thank you.
shugoh
I did it!!
Asukal:
I finally can make localized tapres and tsh with your recommended tools!!
Please see my blog at your convenience!
I'll try to localize folders with init*.dat files!!
Thank you very much!!
(If I have difficulties on making init*.dat files, I may ask you suggestions after I make every effort I can make,)
Thanks again
shugoh
Hi, Asukal
I can localize init*.dat file according to your post on May-15.
As you said, it seems OK that we can describe folder names on both *.dat file, not Unicode Code #.
So far I have no trouble with these *.dat files.
Thank you.
shugoh
Glad to here that!
You have done! you r a MAN!
Keep on going Dark Side!
Hello, Asukal
I'm back...
I have had a strange problem. As a matter of fact, I haven't solved this problem even though I could make Universal ROM in my language.
When I make my Universal hard & soft reset, I always see 2 white bold lines above and below "Windows Mobile" on 2nd splash screen.
I found these lines don't appear when I change mui regional setting. I mean no white lines on 2nd splash when I change:
1) shellres.dll.0411.mui to shellres.dll.0409.mui
2) shellresapps.dll.0411.mui to shellresapps.dll.0409.mui
(I'm trying to change English ROM to Japanese.)
0411 and 0409 have exactly same contents; I just change their name and place them on "windows" folder.
3) Change mui setting both of the following from 411 to 409.
[HKEY_LOCAL_MACHINE\MUI]
"SysLang"=dword:00000411
[HKEY_CURRENT_USER\MUI]
"CurLang"=dword:411
With these changes, I can boot my Universal without white lines and Uni seems working well. (Of course, all letters except for the ones in these 2 mui are in English. But I suppose I can see Japanese if I change all 0411.mui to 0409.mui. (Haven't tested)
I also noticed I didn't change the region code in init*.dat. (i.e. LOC_0409_DIRWINDOWSHELP, not LOC_0411_DIRWINDOWSHELP)
So I changed init*.dat files and made new ROM with 0411.mui (incl. shellres & shellresapps).
However, there were still 2 white bold lines on 2nd splash...
I haven't added:
[HKEY_LOCAL_MACHINE\Security\ColdInit]
"Locale"=dword:00000411
"ColdInit2Done"=dword:00000001
"ColdInit1Done"=dword:00000001
Because my Uni has always stuck before the initial setup (screen alignment and Dr. Johnson etc.).
This time, I added these keys per your instruction, but I'm stuck again...
Do I have to add [HKEY_LOCAL_MACHINE\Security\ColdInit] ?
This would not directly relate to my experience, but I think I can find where I made mistakes.
I appreciate your response.
Thank you.
on my rom, i changed
LOC_0409_DIRWINDOWSHELP, to LOC_0411_DIRWINDOWSHELP
also i added folows
HKEY_LOCAL_MACHINE\Security\ColdInit]
but i dont think those are not reason of your problem,
did you tried to edit new one from versin nbf??
i guees the ROM was crashed,,, i never happend,
you think some reason of registry,,,
how about htis,,,
[HKEY_LOCAL_MACHINE\ControlPanel\Stylus\192DPI]
"FontArray"="500,600,900,1000,1200"
"CurFont"=dword:384
this is the for Screen resolution.
But in my case,,without this,, not happend problems like you,,,,
strange,,,,
Hi, Asukal:
I finally find the root cause of 2 bold lines on welcomehead screen!
the mui file taking charge of screen alignment on start-up set-up process causes this problem. I made the new one with PB and solved this problem!!
(I made the previous one with another tool...)
I'm very glad to inform you this and appreciate your supports very much!!!
P.S. However, I'm still stuck with Coldinit... But this is not an issue.
I've been using the unskinned dialer on my Vogue for the last couple weeks because its much snappier and features an embedded call history. However, after looking at some of the new Diamond custom dialers I've realized I'm not happy with the default skin, so I started pouring over the Windows directory looking for the images that govern the unskinned dialer in hopes I could directly skin it instead of using the dialer overlays.
I was able to find a few files of use, in particular the gifs that control the background color for the call and end keys, the call history images on the left (for call missed/out/in), and the background image. But after changing the files via TotalCommander and soft-resetting, I see no change.
Is there any way to do this without cooking? And does anyone know where else files might be kept for editing this dialer?
ANY help at all would be greatly appreciated.
I'm curious about this too. I've looked all over, but havent been able to find what i'm looking for. Is there a PSD somewhere for the iphone-ish dialers that has the correct splits and things to create our own?
The custom dialers are an alternative to the original dialer...
Look at the files in the CABs for custom dialers, and you will see they have a different set of files. Look at those, and edit them as you want.
Yes, but the custom dialers lose the embedded call history functionality and are sluggish in comparison with wm's default dialer. I don't mind having to cook a rom to get this to work, but I still don't know where all of the images are stored, particularly the ones for the actual number buttons. And perhaps an xml file governing their placement?
Red49er said:
Yes, but the custom dialers lose the embedded call history functionality and are sluggish in comparison with wm's default dialer. I don't mind having to cook a rom to get this to work, but I still don't know where all of the images are stored, particularly the ones for the actual number buttons. And perhaps an xml file governing their placement?
Click to expand...
Click to collapse
Okay...
Maybe this will work...
In the dll files related to the dialer (can't remember there names off hand), there will be graphic files that can be replaced...
Okay, after much searching (now that I knew what I was looking for), I've come up with a list of dlls that may be related:
phcanhtc.dll
phcanoverBMP.dll
dpadmenu.dll
tapres2.dll
tapres.dll.0409.mui
tapres.dll
also, the reg key hklm/security/resover might allow something
Only problem is I realized after continued reading that some of the info I got was related to wm5 roms trying to get smartdialing working like wm6....so if anyone could help me narrow down which dlls are the right ones to edit, that would be fantastic!
also, whats the best way to edit dll and mui files?
Red49er said:
Okay, after much searching (now that I knew what I was looking for), I've come up with a list of dlls that may be related:
phcanhtc.dll
phcanoverBMP.dll
dpadmenu.dll
tapres2.dll
tapres.dll.0409.mui
tapres.dll
also, the reg key hklm/security/resover might allow something
Only problem is I realized after continued reading that some of the info I got was related to wm5 roms trying to get smartdialing working like wm6....so if anyone could help me narrow down which dlls are the right ones to edit, that would be fantastic!
also, whats the best way to edit dll and mui files?
Click to expand...
Click to collapse
phcanhtc.dll -- Contains some BMPs/images
phcanoverBMP.dll -- Contains most of the images
dpadmenu.dll -- Is to do with the dialer workings... Contains no images (I think)
tapres2.dll -- may contain some images
tapres.dll.0409.mui -- is localisation. Mostly just text strings, but may be some images
tapres.dll -- may contain some images
I use "ResHacker" to open up dlls and modify them...
Just tried copying the needed dlls over to my storage card, tried both totalCommander and RescoExplorer, with flight mode off/on, can't get access to tapres.dll, tapres.96.dll, or tapres.dll.0409.mui
Edit: Thanks for the info and the heads up on reshack!
That may be a problem... I'd guess they need to be cooked into the ROM, in which case it may be easiest to take a ROM, dump it, edit the files there, rebuild it and then flash it...
Yeah, I just realized they're rom files and I can't get at them this way.
But I was able to successfully edit phcanoverBMP and change the call history icons.
Thanks for all your help, its cooking time
Red49er said:
Yeah, I just realized they're rom files and I can't get at them this way.
But I was able to successfully edit phcanoverBMP and change the call history icons.
Thanks for all your help, its cooking time
Click to expand...
Click to collapse
No probs!
There are also some files in the WM5 ROM I've dumped in an OEM pack called "Phone_DPI_96" that may be of interest...
they are:
Code:
backarrow_glyph.gif
clg_in.gif
clg_miss.gif
clg_out.gif
cmdpad_land.gif
cmdpad_port.gif
cmdpad_sqre.gif
dialpad_land.gif
dialpad_port.gif
dialpad_sqre.gif
anything beginning with "dlr"
handset_glyph.gif
spd_lst.gif
Okay, so I got ahold of a kitchen, but when I found the tapres dlls in the sys folder, they're not compiled -- its a bin file, 2 txts, and an s000. Reshack can't do anything with these files. What do I do?
You need to use "Reversemode" to turn those into a dll, then you can edit that.
I googled reversemode, and all I came up with was reversemode.com which didn't look like any sort of software that would help with this.
Red49er said:
I googled reversemode, and all I came up with was reversemode.com which didn't look like any sort of software that would help with this.
Click to expand...
Click to collapse
I'll be more helpful then
This post: http://forum.xda-developers.com/showthread.php?t=331094
well this seems to be a brick wall. no matter which file I try to use revresmode on, it says it doesn't work on .net files.
Thanks for the help anyways tho.
I don't know about changing the font of the dialer, but you can change the dialer within the rom contents (only the buttons and background) I found that there are two separate folders in the SYS folder. the files are read only. unlock them and edit in photoshop. you don't have to relock them to cook them back in, just save them in the same exact format they were in before you unchecked the "readonly". That is how I edited mine. I have no idea why why anyone would bother trying to mess with the dll's?!!!
S.V.I said:
I don't know about changing the font of the dialer, but you can change the dialer within the rom contents (only the buttons and background) I found that there are two separate folders in the SYS folder. the files are read only. unlock them and edit in photoshop. you don't have to relock them to cook them back in, just save them in the same exact format they were in before you unchecked the "readonly". That is how I edited mine. I have no idea why why anyone would bother trying to mess with the dll's?!!!
Click to expand...
Click to collapse
There are embedded images in the DLLs...
You need to use reversmode on the folder, not the files within it...
l3v5y said:
You need to use reversmode on the folder, not the files within it...
Click to expand...
Click to collapse
Doing that gives me a "cannot open input file" error. And yes, all files and folders are not marked as read only.
Red49er said:
Doing that gives me a "cannot open input file" error. And yes, all files and folders are not marked as read only.
Click to expand...
Click to collapse
My mistake! Reversmod does dll to module, RecMod (attached) does the reverse...
Sorry!
Thanks to the great job from all the greater guys for the Blackstone dialer.
But I am thinking whether anyone has a way to change the current white-based dialer to a black-based colour scheme. Thanks.
hotiron07 said:
Thanks to the great job from all the greater guys for the Blackstone dialer.
But I am thinking whether anyone has a way to change the current white-based dialer to a black-based colour scheme. Thanks.
Click to expand...
Click to collapse
yes unpack the folder of the dialer and go through and manually change each and every part of the dialer using your favourite image editor. Repackage it up and wait for the adulation of the masses, or more likely someone to start moaning at you because you haven't done it exactly as they want you to... ;p
you mean the folder on the ppc itself or the cab provider ? ...
i don't mind doing the photoshop work if i have the jpg/gif/etc ... but i still need someone to package it into a cab ... as i don't know how
I too would like to know if there's a simpler way to do this.
I'm happy to edit all the files myself in photoshop, but...
When I extract the cab file i recieve alot of files with numerical extensions.
Fine and dandy, i've gone through a few of them and changed the extensions so that they are jpg/png etc just so i can view what they are.
Can anyone with previous experience of editing cab files like this write a simple howto, i.e. how to know which files are which and what format they should be saved in jpg/png/bmp/ico etc.
i saw from the _setup.xml file that all the filename are mentioned inside but was wondering if the marker of this cab can release the original package before cab-ing so that I can photoshop all the image file individual before they cab it again ...
THJahar said:
I too would like to know if there's a simpler way to do this.
I'm happy to edit all the files myself in photoshop, but...
When I extract the cab file i recieve alot of files with numerical extensions.
Fine and dandy, i've gone through a few of them and changed the extensions so that they are jpg/png etc just so i can view what they are.
Can anyone with previous experience of editing cab files like this write a simple howto, i.e. how to know which files are which and what format they should be saved in jpg/png/bmp/ico etc.
Click to expand...
Click to collapse
It sounds like you didn't use a decent program to extract the cabs...
Try http://www.codeppc.com/telechargements/msceinf/msceinf.htm instead
oh and if you want some background reading ....
http://www.cabextract.org.uk/wince_cab_format/
fards said:
It sounds like you didn't use a decent program to extract the cabs...
Try http://www.codeppc.com/telechargements/msceinf/msceinf.htm instead
oh and if you want some background reading ....
http://www.cabextract.org.uk/wince_cab_format/
Click to expand...
Click to collapse
wow ... this make it so much simpler ...
but i see most of the image files are already inside, just got to switch the white image to black and vice-verse ...
hotiron07 said:
wow ... this make it so much simpler ...
but i see most of the image files are already inside, just got to switch the white image to black and vice-verse ...
Click to expand...
Click to collapse
Give it ago, I think the pink images need to stay pink though.
I can cab it up if you need to but there are some free cabmakers around..
They aren't hard to use, the main problem I've found is giving them enough permissions to overwrite files..
this one is supposed to be okay, but I haven't tried it.
http://www.aperitto.com/content/category/23/226/lang,en/ LOL, okay I have tried it now, it's working under WINE on my ubuntru machine
Wince cabmanager is pretty nice as well, but it costs $99, the demo does 15 cabs I think..
hotiron07 said:
wow ... this make it so much simpler ...
but i see most of the image files are already inside, just got to switch the white image to black and vice-verse ...
Click to expand...
Click to collapse
If you do not want to pay for a cab maker to rebuild a cab after you change an image, you can do this by following these steps :
Run MSCEInf. Open the Cab you want to modify (or the TSK which are also Cabs) with the first button.
Make sure that the 9th button is not with red cross. Else click on it. This make sure that extraction preserves Folders names.
Click on the 7th button to extract all files.
Select or create a folder for the extraction.
Extraction is done !
Modify the file you want in the folder or subfolder without changing its name.
Put at the root of the folder you selected or created the Microsoft program (free) CABWIZ. (Do a G....E search)
Open a Dos Windows in the folder (CMD...).
Msceinf has rebuilt the Inf File a the root of your folder so you can do in CMD mode : Cabwiz "name of the inf file".
And your new CAB is at the root of your folder.
Easy, but not really automatic, nevertheless cheaper than with WinCE...
It would be SO cool if someone made a black Blackstone dialer, especially for black Xperia X1s.
I REALLY like the "slide to answer or hangup" function of the blackstone dailer, rather than just the "push to answer" version on the stock Xperia ROM/firmware.
It would be SO cool if someone made a black Blackstone dialer, especially for black Xperia X1s.
I REALLY like the "slide to answer or hangup" function of the blackstone dailer, rather than just the "push to answer" version on the stock Xperia ROM/firmware.
BenThon said:
If you do not want to pay for a cab maker to rebuild a cab after you change an image, you can do this by following these steps :
Run MSCEInf. Open the Cab you want to modify (or the TSK which are also Cabs) with the first button.
Make sure that the 9th button is not with red cross. Else click on it. This make sure that extraction preserves Folders names.
Click on the 7th button to extract all files.
Select or create a folder for the extraction.
Extraction is done !
Modify the file you want in the folder or subfolder without changing its name.
Put at the root of the folder you selected or created the Microsoft program (free) CABWIZ. (Do a G....E search)
Open a Dos Windows in the folder (CMD...).
Msceinf has rebuilt the Inf File a the root of your folder so you can do in CMD mode : Cabwiz "name of the inf file".
And your new CAB is at the root of your folder.
Easy, but not really automatic, nevertheless cheaper than with WinCE...
Click to expand...
Click to collapse
Nice one Benoit,
Nothing beats MSCEInf for extraction
That aperitto one looks pretty neat for all inclusive building including reg editing etc.. damn site better than wince cabmaker and is free (for non commercial), so far so good..
I have installed the blackstone dialler by itje its cool but i thought it was this big digit one from blackstone modded for the X1.
Ive tried to download the big digit one from Blackstone but get no dl link by email, I have big sausage fingers and keep making mistakes with the default size touch dialler on the X1 and need a bigger digit keyset to aim my stubby fingers at while making calls.
Is there a big digit dialler available yet for the X1?.
Edit,: Just found this, a nice touch on the dialler by itje is the bluetooth headset icon that when connected changes from the default bt icon to a headset !
I know there are other hacks out there for this, but they have left something to be desired - like not working for newer Kaiser builds. Specifically, HTC used a CNAME to one of their own DNS servers and thus the previous patch that has been distributed here would not fit in the available string space.
The other method, using "Pocket Hosts", does not appear to work on either my Kaiser or Wizard to redirect HTC Home or Manila2D - not sure why, but it doesn't do anything - I tried that as well. My system never sees any packets coming from the mobile when I use the "hosts" soltuion - so it appears that actually patching the string is required, at least in modern (WINCE 6.1) builds.
Anyway, I registered a different domain, then "rolled my own" on that quite-short URL to allow patching some of the Manila2D.exe files that otherwise would not fit, using the existing script from Not2advancd (with a few changes to suit my environment, which is apparently very different than his) and some additional back-end hackery on my systems.
The site is at http://htcwx.org, and there are links there for two ZIP files (attached to this post as well) for two different versions of Manila2D.exe - one that is cooked into the HyperDragon Kaiser build, and the other for a build (OpenTouch V7.7) on the Herald. Both have been personally verified as working. Instructions for modifying the XML file that controls Manila's Weather program are included at the above URL - the short form is that you simply replicate an existing US city in the correct alphabetical order and using the same format as what's already there, recognizing that this is an XML file and thus may (and in fact does) contain some non-ASCII characters (that is, use something like Notepad to edit it, not something like "Wordpad" that will attempt to interpret what's in there instead of just editing the character stream.)
If you have a Manila2D.exe that is not compressed (that is, its approximately 1MB in size - if its ~400kb or so it IS compressed and I can't work with it) I will make an attempt to patch it for you. Just attach it to this thread (make it a ZIP file and upload it) and I will look at it, comment back on this thread, and if it CAN be patched add it to the master list at the above URL so everyone can get to it. Other versions of Manila (e.g. the newer "3d") version) should also be patchable - again, assuming the executable is not compressed.
The weather server on that URL is on a high-bandwidth commercial connection that I control and is at no material risk of going away. It is available to all who wish to use it.
I ask (but obviously don't require) that Chefs that wish to cook a Manila copy into their work and use this weather server let me know, and if possible let me verify that their cooked version is working properly before releasing it so I can verify that all is well on this end. Doing so should not take long; you can reach me by PM here and I will normally be able to get back with you quickly.
Comments and questions on this welcome, along with requests, but please keep them to THIS THREAD.
Enjoy.
Request
Hi!
I'm an Italian Chef for Niki
I use new manila 2D from iolite (v 1_00_19111733_00), but I can't add my city
Can yuo try to patch this exe for me? (it's not compressed)
Thank yuo very much!
The URLs are not in that file.
What you want to do is change the URL to "http://htcwx.org", leaving the entire rest of the string AFTER that alone (that is, you have to "move down" the parameters on the command that is sent.) Once you've changed the file you have to re-sign the file using the code-signing tools (a self-signed certificate is fine) otherwise it will be detected as having a corrupt signature and refuse to run.
A hex editor such as XVI32 is necessary to do the modification; the code-signing tools are available on the net.
I tried uing that hex edior you mentioned... now I need glasses.
even tried comparing a patched file to the one I am trying to patch.. um still confused. finally found the (maybe, but I am willing to try) HTTP//htc..... but then I still had no idea what to do.
Could you please help me figure it out
when I edit the url do I need to have the boxes between the characters? I am asuming yes.
Do I need to "make space" for http//HTCWX.org/acuweather....
sorry. have no ____ing clue what I am doing... and I think I just lost some brain cells trying.