Related
Ok let me see if I can explain my problem right. I got an android locked to t-mobile USA I am planning to but an unlock code for this phone but the problem that I encountered before buying the code is this this phone come with an application that when it start up it asks you to to set up your gmail account but I am in mexico I am not interested in having a gmail account how can I delete this application or stop it or skip it otherwise I am not going to be able to use the phone what can I do I like this phone but it is useless in the state that it is help
Not having a gmail account means you wont be able to use the market, your contacts wont sync, the included calendar app wont work very well. There may be other issues as well.
Do you hate google or what? A gmail account is free.
no thats not the reason I dont hate google it is just that at the moment when my android turns on it start up with this message
Setting up your T-Mobile G1 I tried to register but it wont register and I can not even use the phone functions the android stays on trying to register this what I do
i try to register then a message comes up that says that it may take up to five minutes but after a while another message show up and it says
there is a problem comunicating with google servers
this could be a temporary problem or your sim card may not be provioned for data services. If it continues call customer service
well the bottom line I really want to use this phone but how can I get pass this registering bull
here in mexico we run into this problems all the time our cell carriers suck basically i just want to be able to use the phone functions only if anyone can help I will apreciate it.
http://forum.xda-developers.com/showthread.php?t=452316
You may need to downgrade to RC29 depending on what version your phone is currently running.
Also, I'm not sure if your carrier, or any at all, block by IMEI if a phone is reported stolen. I'm not accusing you of stealing, but, you know...
elvences said:
no thats not the reason I dont hate google it is just that at the moment when my android turns on it start up with this message
Setting up your T-Mobile G1 I tried to register but it wont register and I can not even use the phone functions the android stays on trying to register this what I do
i try to register then a message comes up that says that it may take up to five minutes but after a while another message show up and it says
there is a problem comunicating with google servers
this could be a temporary problem or your sim card may not be provioned for data services. If it continues call customer service
well the bottom line I really want to use this phone but how can I get pass this registering bull
here in mexico we run into this problems all the time our cell carriers suck basically i just want to be able to use the phone functions only if anyone can help I will apreciate it.
Click to expand...
Click to collapse
Ok... Long story short:
The G1 is a "google" phone and is dependant on data services and a google account to operate. That being said, the only way you can work around this without having a solid data connection (through your cell provider) is to go the process to root your phone and use one of the builds that allows you to skip google registration. I know TheDude's build lets you, I'm not sure which other builds do. By skipping the sign-in process you would still be able to use wireless internet to get your phone to sync with google once you turn on wifi.
Of course, your phone will have to be unlocked if it's not already.
I suggest you look at the development forum and start reading the links from the "round-up" sticky on the very top.
Thank you everybody for your quick responses but it seems that i am still stuck in the setting your account bull.- i try to root my android but i can even get to format my m sd card as a follow instruction in how to root phone it says to wait until mount show up on my screen how am i suppose to do that when my phone wont get past the setting up account screen can i format m sd card with adapter and then load the rc29 and put it back on my android and follow the rest of the intructions will that work i dont want to try it just like that has anyone else done like this is this going to brick my android.
elvences said:
Thank you everybody for your quick responses but it seems that i am still stuck in the setting your account bull.- i try to root my android but i can even get to format my m sd card as a follow instruction in how to root phone it says to wait until mount show up on my screen how am i suppose to do that when my phone wont get past the setting up account screen can i format m sd card with adapter and then load the rc29 and put it back on my android and follow the rest of the intructions will that work i dont want to try it just like that has anyone else done like this is this going to brick my android.
Click to expand...
Click to collapse
Yes, if you have a card reader you could put the dreaimg.nbh, update.zip and recovery on your sd card and never have to mount your phone to the pc.
Or just use another device with a memory card reader or writer. Or even better, install ADB, go into the recovery window by pressing home+power and on your computer enter the ADB interface and type in
adb mount /sdcard/
adb push (location of firmware).nbh /sdcard/
and voila.
Hey I downloaded android-sdk-windows-1.5_r2 isnt this file suppose to have everything I need to work in my android but it doesnt where is ADB at and I am suppose to have and update zip and restore it doesnt say anything about that in development. I am liking this but it seems difficult but thats why I like it just show me where this files are at and I promise that I will at least brick my android lol not really but I hope I get it working. Well this are the instructions in how to root.
Format your phone's SD card to FAT32 mode:
Hook your phone up to your computer using a USB cable and then wait for the notification to show up in your title bar of your phone.
Click the notification, and then click "Mount".
A new removable disk should show up on your computer. Right click it and select Format, and select FAT32 as the file system type.
Download and unzip the RC29 or RC7 image file. Copy the DREAMIMG.nbh file to the SD card. (RC29 for US, RC7 is for UK)
Turn the device power off.
Hold Camera button, and press Power button to entry bootloader mode. You should see a gray/white screen with instructions to flash your phone with the update on your SD card. If you don't see that, make sure you followed the instructions properly.
As per the on-screen instructions, press the Power button to start upgrade procedure. DO NOT DO ANYTHING TO INTERRUPT THIS PROCESS.
After it is finished, perform the restart your phone.
see it doesnt say that I need and update zip and a recovery. But I might be wrong so where are this files at
skri11a said:
I suggest you look at the development forum and start reading the links from the "round-up" sticky on the very top.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=442480
http://forum.xda-developers.com/showthread.php?t=455860
http://forum.xda-developers.com/showthread.php?t=502010
http://forum.xda-developers.com/showthread.php?t=517874
I have cut to the chase and given you the direct links in the stickies that you were supposed to have already read if you were following the very good advice from skri11a.
After reading this, you should have all of the knowledge you need to make your phone work... If not, come back here and we can clarify any further questions.
If you continue to refuse to help yourself, there is a good chance that this thread will be locked, closed, fired, deleted, or shot into space.
Well I am back after reading and trying all that I have to say and I am probably going to get this thread close is this. I can get adb to run I downloaded sdk copied to C installed drivers for my android and nothing happens. I also tried using a memory adapter and formated my sd to fat 32 and then copied DREAIMGRC29 and then tried to run it and nothing happen I am the dummest person in the world.
I don't think this is the phone for you. Just sayin.
elvences said:
Well I am back after reading and trying all that I have to say and I am probably going to get this thread close is this. I can get adb to run I downloaded sdk copied to C installed drivers for my android and nothing happens. I also tried using a memory adapter and formated my sd to fat 32 and then copied DREAIMGRC29 and then tried to run it and nothing happen I am the dummest person in the world.
Click to expand...
Click to collapse
Did you happen to rename/extract the DREAIMGRC29? It needs to be the DREAIMG.NBH. Also "Dumbest" not "Dummest".
elvences said:
Ok let me see if I can explain my problem right. I got an android locked to t-mobile USA I am planning to but an unlock code for this phone but the problem that I encountered before buying the code is this this phone come with an application that when it start up it asks you to to set up your gmail account but I am in mexico I am not interested in having a gmail account how can I delete this application or stop it or skip it otherwise I am not going to be able to use the phone what can I do I like this phone but it is useless in the state that it is help
Click to expand...
Click to collapse
to unlock your g1......... CALL T-MOBILE!
it will be free, so don't go buying into those sites on the net.
also, go HERE
most or all of you modding, hacking, and basic information will be answer by reading that guide.
mrcrs said:
to unlock your g1......... CALL T-MOBILE!
it will be free, so don't go buying into those sites on the net.
also, go HERE
most or all of you modding, hacking, and basic information will be answer by reading that guide.
Click to expand...
Click to collapse
He can't, he is in Mexico.
hamshu said:
He can't, he is in Mexico.
Click to expand...
Click to collapse
he still can call.
and i'll even list the number: 1-800-937-8997.
all they need is the IMEI number, then they give the correct unlock code contingent on that.
and it'll be obvious that he's in mexico and needs his g1 to be unlock, so i'm sure they'll supply that code for him.
granted he's been with tmo for 90 days or more.
nolageek said:
I don't think this is the phone for you. Just sayin.
Click to expand...
Click to collapse
This is a great phone and it is for me aned I going to get to the bottom of this even if I end up bricking my phone.(I can not use it so if I brick it will have the same use)
hamshu said:
Did you happen to rename/extract the DREAIMGRC29? It needs to be the DREAIMG.NBH. Also "Dumbest" not "Dummest".
Click to expand...
Click to collapse
My man well since english is not my first language I apologize for any mistakes in my writing but you still got my point. And yes I did extract the file and its name is DREAIMG.NBH BUT WHEN I TRY TO RUN IT WONT.
mrcrs said:
to unlock your g1......... CALL T-MOBILE!
it will be free, so don't go buying into those sites on the net.
also, go HERE
most or all of you modding, hacking, and basic information will be answer by reading that guide.
I can get the code. The problem is I can type in the code the phone wont let me pass the setting an account.
Click to expand...
Click to collapse
What do you mean? I have a quick question for you though, who is your carrier, and do you have the proper APN set up?
Hurrah! this has been fixed WOO!.
see here.
well done guys, you have made me a happy g2 owner again!!
Hi Everyone,
i figured we might need to clean up the
http://forum.xda-developers.com/showthread.php?t=805024
conversation.
as i see it, there are 2 issues
1. people receive an unlock code, the phone accepts it but then it cannot find any network
2. people receive an unlock code, have troubles entering the code but eventually get it in ok.
please do not post anything "setting" related - apn's, bands etc as this has been tried and shown not to work (yet)
it might be helpful if people who have issue number 1 could post some answers to some questions.
as i am not at all smart enough to work out what we need to know from these people, id appreciate it if those in the know could pm me what they think could be useful, and ill make a template for people to follow
troubleshooting template
----
----
----
----
Current Theories: (please PM me if i have anything wrong here or if i need to add details.)
-------------
Theory #1
Ghul99: the code is accepted, but the phone is still locked?
http://forum.xda-developers.com/show...&postcount=121
------------
interesting information
this seems to support theory #1
1. i unlocked phone - code entered successfully, and i was no longer prompted to enter an unlock code
2. i perm-rooted my phone - all went to plan
3. i put the vision rom on my phone (http://forum.xda-developers.com/showthread.php?t=834450) loaded ok
4. i put a sim in my phone and now i am prompted for an unlock code.
5. i tried to re-enter my code but it would not accept it (it is the same code from step 1)
Nice idea for taking the initiative to clean up the thread which was getting excessilely long!
I'm hoping we can see some progress in a few days as I'm really missing being able to get any cell reception on a MOBILE PHONE!?
Regards.
I will summerize my knowledge later but one thing upfront.
IntuativNipple posted today in IRC that he found the way to get real S-OFF which would also allow SIM-unlock without code.
So there is hope for a solution, but keep your patience.
Sent from my T-Mobile G2 using XDA App
guhl99 said:
I will summerize my knowledge later but one thing upfront.
IntuativNipple posted today in IRC that he found the way to get real S-OFF which would also allow SIM-unlock without code.
So there is hope for a solution, but keep your patience.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
That's really exciting.
Thanks for bring up the good news!
Sent from my T-Mobile G2 using XDA App
guhl99 said:
I will summerize my knowledge later but one thing upfront.
IntuativNipple posted today in IRC that he found the way to get real S-OFF which would also allow SIM-unlock without code.
So there is hope for a solution, but keep your patience.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Just to help guhl and catch up with some unnecessary posts.
Common solutions like Reboot, different sims to try, Hard reset, flash stock ROM or trigger the unlock window to reenter the code doesn't work
Summary of my knowledge so far
For case 1 which was the original problem my theory is the following.
Cause:
Because of problems with the write procedure to the emmc memory the MCCMCN to which the phone is locked did not get cleared but set to an arbitrary value in my case "C3AB".
The CID value is still the same as it used to be (and also in case of a successful unlock would stay the same) which is "T-MOB010". The CID is a 8 character string and the case where all characters are the same (i.e. "11111111") is called Super-CID.
It is of no relevance if you use or used the hardware or software keys, T-Mobile or third party sources. The only reason where it would be your fault is if you pulled the battery!
The unlock-code that we possess (regardless if official or from a different source) is not valid to unlock the phone from this value "C3AB". If one tries again (directly with the modem, using my modified libril.so or a different ROM) the lock counter will increase.
Potential ways to repair this state:
1. Give it back to T-Mobile if you can In my opinion this is a clear warranty case
2. Find someone who has the MegaSIM and the HTC-diag software.
This will definitely work but it is going to be hard to find someone because the SIM is rare and very new.
3. Wait until (or help achieving) the so called "real S-OFF" state of the phone (when also the radio has security disabled) is reached.
When this is achieved one can disable the SIM-lock without any code.
There are still some very good developers after this goal even if for different reasons.
Which information could help us:
1. The output of the following AT-Command sequence from successful and unsuccessful unlocks
Code:
ATE1
ATV1
[email protected]?
[email protected]?AA
[email protected]?40
[email protected]?80
I will try to write a HowTo later for Windows.
For linux see the following posting from the old thread (http://forum.xda-developers.com/showpost.php?p=8750299&postcount=121)
2. The next thing that would help is a logcat from the first unlock process itself.
Howto:
Start the first logcat using the USB-cable and adb before you boot the phone with the foreign SIM.
Code:
adb logcat -b radio > lc_unlock.txt
leave the logcat running and complete the unlock procedure till the phone reboots (the logcat will end automatically)
As soon as the first logcat exits start a new one using:
Code:
adb logcat -b radio > lc_after_unlock.txt
leave it running for 1 minute and then stop it using <Ctrl>-C
3. The next thing that really would help is that you do not post anything in this thread (use the old one instead) that has to do with:
- the APN
- trying another SIM (you would be very lucky if you had one that fits the arbitrary SIMlock)
- reboot, factory reset, use a stock or non stock firmware
- use the hw/sw-keyboard, wait for the right outside temperature or other esoteric procedures
Finally I would like to ask moodecow to edit his original posting and incorporate or link everything that he finds important or helpful in his posting so that it will stay an top.
That is some very exciting news, thank you for the update!
One quick question, when we achieve radio-s off it esssentially would mean everyone could unlock their phones for free?
Thanks.
Sent from my T-Mobile G2 using XDA App
I have 2 ideas, which can help:
1. For people before unlock - maybe performing S-off before unlock will help.\
2. For people after unlock: in bootloader there is "SIMLOCK" option. When you open it, it shows file not found etc. As I think, it can be used to simlock phone for operator, whose numbers are in some file. There is my solution - find what that files are in phone's source code or by any other method, then put them in right place, enter numbers of operator you want to use, open that "SIMLOCK" and lock phone to your network. I don't know if it will work, but it makes some sense.
ms93 said:
I have 2 ideas, which can help:
1. For people before unlock - maybe performing S-off before unlock will help.\
2. For people after unlock: in bootloader there is "SIMLOCK" option. When you open it, it shows file not found etc. As I think, it can be used to simlock phone for operator, whose numbers are in some file. There is my solution - find what that files are in phone's source code or by any other method, then put them in right place, enter numbers of operator you want to use, open that "SIMLOCK" and lock phone to your network. I don't know if it will work, but it makes some sense.
Click to expand...
Click to collapse
Your first idea sounds reasonable and I would support it.
Your second idea is something that is worked on, but you do not only need the correct file (which is actually called DMCID.dat) but there also has to be some "magic number" (like on a gold card) on the micro-sd card.
an important piece of info to carryover from other thread:
1- No APNs are listed
2- if you try to define one, it doesnt save
No APNs being listed is related to the rom more or less, not the issue we're having.
APN is software issue, correct me if I'm wrong so either way it shouldn't pose as an issue to us.
im saying its a symptom that seems to go along with the problem in the title of this thread, so, worth noting.
ie: i think everyone who has the post-unlock no-connection problem, cannot save APNs. all others can.
if you are a counterexample please say so. that would help.
guhl99 said:
For case 1 which was the original problem my theory is the following.
Cause:
Because of problems with the write procedure to the emmc memory the MCCMCN to which the phone is locked did not get cleared but set to an arbitrary value in my case "C3AB".
The CID value is still the same as it used to be (and also in case of a successful unlock would stay the same) which is "T-MOB010". The CID is a 8 character string and the case where all characters are the same (i.e. "11111111") is called Super-CID.
It is of no relevance if you use or used the hardware or software keys, T-Mobile or third party sources. The only reason where it would be your fault is if you pulled the battery!
The unlock-code that we possess (regardless if official or from a different source) is not valid to unlock the phone from this value "C3AB". If one tries again (directly with the modem, using my modified libril.so or a different ROM) the lock counter will increase.
Potential ways to repair this state:
1. Give it back to T-Mobile if you can In my opinion this is a clear warranty case
2. Find someone who has the MegaSIM and the HTC-diag software.
This will definitely work but it is going to be hard to find someone because the SIM is rare and very new.
3. Wait until (or help achieving) the so called "real S-OFF" state of the phone (when also the radio has security disabled) is reached.
When this is achieved one can disable the SIM-lock without any code.
There are still some very good developers after this goal even if for different reasons.
.
Click to expand...
Click to collapse
i have got HTC MEGA SIM and Almost all DIAG files but
T-mobile G2 case =After putting unlock code NO NETWORK cant be solved because when we give s58 clear command it shows SIMLOCK CORRUPTED
i can post the detailed info and pictures if you want it would be a pleasure if could help in any kind of DEVELOPMENT
BTW
if we don t put code in the same version,same country,purchased in the same lot of handsets and use MEGASIM directly without touching anything than it works perfect
kabir_del said:
i have got HTC MEGA SIM and Almost all DIAG files but
T-mobile G2 case =After putting unlock code NO NETWORK cant be solved because when we give s58 clear command it shows SIMLOCK CORRUPTED
i can post the detailed info and pictures if you want it would be a pleasure if could help in any kind of DEVELOPMENT
BTW
if we don t put code in the same version,same country,purchased in the same lot of handsets and use MEGASIM directly without touching anything than it works perfect
Click to expand...
Click to collapse
Posting any further details and/or pictures would be much appreciated!
So if megasim has failed due to corruption I think that the only way to solve our issue is to write directly to emmc partition holding locking information. And I don't now how easy and plausible this is...
I think if we get S-Off for Radio, we'll be able to write to that partition. I hope
andrewklau said:
I think if we get S-Off for Radio, we'll be able to write to that partition. I hope
Click to expand...
Click to collapse
I am a little bit worried about writing this information directly because the partition will be encrypted.
And also copying the complete partition from a working phone or one that is still unlocked will not be an option because the IMEI will also be there and we would not want to overwrite that.
So my hopes are more that there is some kind of a restore procedure from a secure area (I know that Nokia phones can do this, but HTC ?) or that we can lock the phone again with the SIMLOCK option in hboot.
Sent from my T-Mobile G2 using XDA App
well I guess time will tell, does tmobile or htc do replacements (or has anyone tried) for phones no longer on a contract or that are now unlocked?
Sent from my T-Mobile G2 using XDA App
andrewklau said:
Posting any further details and/or pictures would be much appreciated!
Click to expand...
Click to collapse
here we go Pictures first Video coming soon
First Red colour is the error we get on when we try the command
1=clear s58 data
2ND IMAGE is the one when we press the DEVICE INFO
today is sunday not much time will upload the full clear video tommorow and still i have not tried to the all options of the diag maybe it can repair it but sure i will do some more things tomm.
88
I have tried to use my HTC vision G2 as I unlocked it but after that I am unable use as I am unable to find anything which would be hlpful for me as I have the first case problem. I just want to know that would it help me that if someone would flash my HTC Vision G2. I just want to know about that as now I am in Pakistan
Sent from my T-Mobile G2 using XDA App
**UPDATE**
This method causes your serial number to change to 00000000 (which isn't a problem as such as this isn't currently used for anything) but there is a new method which involves directly hex editing the nv_data.bin file, which may be faster and does not change your serial number. You can find the details here: http://forum.xda-developers.com/showthread.php?t=843323.
**UPDATE**
First up I'll say that I'm not incredibly familiar with Galaxy S firmware changes/modding, and this mostly builds on work done in these areas, so not all these steps may be necessary but they worked for me. If someone can suggest a faster way to do this/unnecessary steps then please go ahead and reply with them!
This unlocked my Network Locked Australian Galaxy Tab and so I assume should work for others.
You should back up your /efs/ folder before you proceed as you may need this to undo if something goes wrong.
*I take no responsibility if something goes wrong!*
Requirements:
Root access
repair_nv_data.zip (from http://forum.xda-developers.com/showpost.php?p=8942669&postcount=94)
Java
Busybox
The Android SDK for ADB, Root Explorer or some similar file system explorer/editor
(If you have US firmware with no Phone software, you may need to flash European firmware as described here: http://forum.xda-developers.com/showthread.php?t=838250 ).
Firstly, on your phone dial *#7465625# and check if the Network Lock is set to [ON], if so then your phone is locked (duh), so continue.
1. Use Superoneclick (http://forum.xda-developers.com/showthread.php?t=812367) to root your phone (the other z4root method may work as well, but this isn't what I used).
2. Either use ADB or some other method to rename or delete (backup first):
/efs/nv_data.bin.md5
/efs/.nv_data.bak
/efs/.nv_data.bak.md5
(I just used Root Explorer to rename them to something else).
3. Restart your phone and then go into the /efs/ directory and see if the 'nv_data.bin.md5' file has been re-created by your phone, as long as it has been created then you can proceed.
4. Go to http://forum.xda-developers.com/showpost.php?p=8942669&postcount=94 and download the repair_nv_data.zip file (the credit for all of this mostly goes to that thread and helroz).
5. Install 'busybox' from the Market. Once you install it, you actually have to run it and properly install it (the Market app is basically an installer) - the files in the above zip have a dependency on this.
6. Extract the above zip to your PC, plug in your Tab in USB debugging mode. Run the Step 2.bat from the extracted file. You may need to allow the script super user access several times. This should copy the /efs/ and a bunch of files into a directory with a french name.
7. Run the Reparation_nv_data.jar file. (You will need Java for this step.) It will prompt you to enter two numbers, which are your pseudo-unlock codes. I entered '11111111' and '11111111' (eight 1's) both times. This rewrites the nv_data.bin file to be simunlocked with these details.
8. Run the Step 4.bat. Your superuser app (the one installed when you rooted using SuperOneClick) will need you to allow each command to have root access so keep an eye on your Tab. You may need to press y/n a few times if you encounter errors. This is uploading the edited nv_data.bin onto your Tab.
This batch file will stop several times and need you to hit a key when it pauses. My Tab rebooted halfway through this batch file - when it did this I waited for it to fully reboot back to the lock screen before pressing a key to make the script continued while the Tab was actually able to respond to its commands.
9. Towards the end of its execution it rebooted a second time. It paused during loading up and had some yellow writing on the screen saying it was updating media (I assume it was rebuilding the nv_data.bin). Leave it for a minute and it will prompt you to reboot/some other options. Just press whatever it wants (home I think) to reboot the phone - you don't want any of the other recovery options.
10. Go into your dialer and put in *#7465625# again and (hopefully) voila! Your phone should no longer be network locked. Try a SIM from a different provider to make sure.
Enjoy!
Edit: I had to go out and actually buy a prepaid SIM to confirm that all was working with a different provider. Attached are screen caps of my Tab on two different networks, as well as the network status screen, making/receiving calls etc. all works on both.
Awesome man, thanks.
This is much better than the 2 month wait we had for Galaxy S unlocking.
Hello, I'm french and i use your post to unlock my Galaxy TAB SFR ''réunion island'' and she is unlock thanks for your AMAZING post for unlock TAB
Ps: For unlock my TAB by SFR REUNION, he tell me 150 Euros.... Vive smithdc & helroz
Works well! I had little trouble running java on windows7. But changing compatibility mode to windowsxp sp3 and check run this program as an administrator solved the problem.
Thanks for easy guide!
tacoda, you mean for running the .jar file? or for installing Java itself? (I assume the former).
Sweeet thx , curious if unlocking the AT&T version has hardware only set to AT&Ts 3G frequencies, so 3g wont work on tmobile or is it capable of running 3g on tmobile with a unlocked AT&T tab?
smithdc said:
tacoda, you mean for running the .jar file? or for installing Java itself? (I assume the former).
Click to expand...
Click to collapse
Running the jar file. I didnt know how to run it.
Sent from my SGH-T959 using XDA App
Does the sim card and/or sd card should or should not be plugged in during the unlocking progress?
It shouldn't make a difference Zeron.Wong.
jay_jay_n said:
Sweeet thx , curious if unlocking the AT&T version has hardware only set to AT&Ts 3G frequencies, so 3g wont work on tmobile or is it capable of running 3g on tmobile with a unlocked AT&T tab?
Click to expand...
Click to collapse
Traditionally, AT&T and T-Mobile hardware used different radios, it was more than just firmware. That's also true on the little brother Galaxy S series, the Vibrant has a different radio than the Captivate (though the Vibrant radio DOES have 1900 band in the hardware, for some reason).
Kudos to smithdc for this awesome guide! I saved a lot of money thanks to him. Congrats again.
Bump, is there any way to sticky/pin this for people?
So your saying if I use this method and install my tmous unlimited sim I can get calls and 3g or do I need a prepaid sim
I'm not sure on how T-Mobile are blocking, but if it IS my IMEI then you would have to use a SIM from a different network.
If they are blocking your IMEI on their network, then you would have to use a SIM from a different network (as a different network, wouldn't be blocking this IMEI number). Changing it to a different SIM on the same network won't help as your IMEI is for the device itself.
I just want to clarify something..
I have a T Mobile Tab and want to use a SIM I have for ATT.
Will I have to flash my device with the EU firmware first in order to get the phone software on it..then do the rest of the unlocking steps?
Assuming thats correct..after unlocking it I then can put my ATT sim card in and it should work for calls and data (Edge only) with not having to tweak any setting at all? Or do I have to set up my wap.cingular connections for the data like on a WM phone on ATT?
And if I want to get back to original out-of-the-box firmware from T Mobile (like if I had to send it in for repair) I just have to flash stock T Mobile firmware and its back completely to original?
Thanks..and wow am I loving this TAB !!!
You'll need to set up your APN data for AT&T, yes.
Thanks for the fast reply. As for the flashing of the EU rom..is that the only/best way so far in order for me T Mobile Tab to get the radio software on it. I was thinking I saw an APK for the radio software someplace but did not know what way was better.
I just want to be 100% sure bfr I take the jump to unlocking and playing with the phone part
thanks
I got a quick couple of questions:
1. If I restore original firmware (Canadian), does it relock my phone?
2. Where can I get the Canadian firmware release? I see EURO and US, but no Canadian.
I read on one of the other threads that sim unlock method also changes your imei number. Is this really case?
clubtech said:
I read on one of the other threads that sim unlock method also changes your imei number. Is this really case?
Click to expand...
Click to collapse
Yes, it will set your IMEI to a bogus one that will get your T-Mobile internet access disabled after 1/2 hour.
I bought this phone via craigslist, and it works minus getting connected to my network (tmobile)
i tried rooting it, but when i go into recovery, it says that there is no sdcard/update.zip directory..my sd card is "unavailable" when i check it in the settings.
i factory reseted my phone, and still nothing with the service. any help?
Try going to settings , wireless and network , mobile networks , network operators and click search now . It might take a few searches but it will eventually register to the network .
I tried that as well, it gives me some error with my sim card.
but my sim card works in every other phone, just not this one
I've lost all hope in society. Man, people knowingly sell things with problems. What makes someone think it is morally okay to rip off another person. Why be a morally corrupt individual?
I hope your phone is fixable, seems like the person sold it to you knowing there was a problem.
Try using odin to go back to stock JFD, see if that helps. Just make sure you can get into download mode with the 3 buttons with no problems
I'll try that, any other ideas..?Thanks btw
I noticed that odin is only for windows, while I'm on a mac..
how do i go about doing this on a mac then? i was thinking restoring a stock rom might help..
You can use Heimdall as an alternative to Odin. It runs on Macs and linux boxes.
Here is the thread that contains the DL Link and info about the program. I have personally never used it, but have read that it's fairly simple. I also recall a member from xda making a video tutorial that he posted on youtube.
EDIT: Here is the original thread from the I9000 forum.
If you have any questions it would probably be better to post there.
I believe the developer checks that thread far more frequently than the one here in the Vibrant forum.
Thank you so much, I'll try to fiddle with this.
I can't seem to locate a stock rom anywhere, the mirrors that I found on this website (the bible thread) the links were dead
Well hell that sucks.
I've got it. I'm zipping it up right now and I'll start uploading ASAP.
I'll post back when it's ready for you.
Awesome,thanks!
Here you go, man. Samsung T959UVJFD True Stock Firmware
After you download the archive. Unzip it and there will be a two files inside, 'T959UVJFD.tar' and 's1_odin_20100512.pit'.
I tried this, but I still get the error that my sim card does not allow connections to this network
any idea what could be wrong..? i sure hope i didn't lose $280 dollars...
Perhaps the phone was locked to a different carrier? I remember when I first got my Vibrant and was reading about rooting, I also saw information that switching networks between AT&T and T-mo was *extremely* easy. I thought I remembered seeing information at one point regarding the codes for each carrier (so you could lock back to t-mobile), but I can't find it now.
Here's the post on unlocking your phone though:
http://forum.xda-developers.com/showthread.php?t=761045
thanks so much! this might be my problem!
i downloaded the SGS_Unlock.apk, but when i opened it,it said there was no codes and asked me if i was sure that i was using a samsung galaxy s?
Edit:i'm using a mac, and i'm trying to use the mac software for the unlocking, but when i run the software it tells me this
strings: can't open file: ./nv_data.bin (No such file or directory)
strings: can't open file: ./nv_data.bin (No such file or directory)
Your code is:
I get a blank.?
Is there anyway you can contact the person you bought the phone from and ask them what network they were using the phone on? Or even ask them what exactly they have done to the phone?
They haven't been answering...****ing assholes
Are you rooted? I think that you need su permission to see the path that nv_data.bin is in.
Also, if you go to Settings > Wireless and Network > Mobile Networks > Access Point Names, what do you see there?
i am not rooted, i will root my phone tonight
Are you still having the "SD card unavailable" issue after flashing back to stock firmware?
When you are ready to root use this.
Hi,
Is anyone else having a problem with Xfinity Mobile data? I can make phone calls, but I can't get any data connection. This was a phone I bought from Sprint, and due to their messed up unlock system, it got relocked, so I manually unlocked it by using this method: https://forum.xda-developers.com/showpost.php?p=75994498&postcount=360
After that, the phone got unlocked successfully. It accepted a TMO sim, and I was able to update to newer firmware. Today, I decided to put it on my Xfinity Mobile line, and I just can't make data work. Any help would be appreciated.
Thank you,
OK. I think I narrowed down the problem. APN setting has VZWINTERNET. It's supposed to be COMCAST.RSLR.VZWENTP based on what I read on the internet. The problem is, I can't edit or add a new APN. I saw someone else talking about this APN setting problem, and his was resolved with the April security patch https://forums.androidcentral.com/e...cant-add-edit-apn-all-sudden-lost-4g-lte.html
I have that security patch already installed, but my problem persists. I can't change APN. Any help would be appreciated.
It's possible Xfinity locks the APN settings or that it has something to do with yours being the Sprint version. I would power the phone down and remove the SIM. Power the phone on with no SIM card and when you are booted up go into settings and reset the network settings. Power down again and insert your Xfinity SIM. That should ensure that the new SIM populates all the network settings.
jhs39 said:
It's possible Xfinity locks the APN settings or that it has something to do with yours being the Sprint version. I would power the phone down and remove the SIM. Power the phone on with no SIM card and when you are booted up go into settings and reset the network settings. Power down again and insert your Xfinity SIM. That should ensure that the new SIM populates all the network settings.
Click to expand...
Click to collapse
Thank you for replying. That did not work. I don't think it's Xfinity. The problem is that APN gets locked to VZW instead of Xfinity's APN, which is why data doesn't work. I can put a TMO sim card in it and it works fine, so I don't know that there is something wrong with the phone itself. If you have any other suggestions, I would appreciate it. I'm desperate to get this working.
goldentequila said:
Thank you for replying. That did not work. I don't think it's Xfinity. The problem is that APN gets locked to VZW instead of Xfinity's APN, which is why data doesn't work. I can put a TMO sim card in it and it works fine, so I don't know that there is something wrong with the phone itself. If you have any other suggestions, I would appreciate it. I'm desperate to get this working.
Click to expand...
Click to collapse
In a Reddit thread, a user says you need to disable Enhanced LTE:
Under Settings > More > Cellular Networks, disable "Enhanced 4G LTE Mode" and set "System select" to "Automatic"
Haven't tried it myself, but I'm thinking of switching to XM and would like to know how this works out for you.
Get your original Xfinity phone factory reset the original Xfinity phone put your Sim in go through activation. This should work for you this also fixes volte on Xfinity If your volte ever gets deactivated. Anyway from what has happened to my other phones sometimes the apn can get changed on the Sim and got carried over somehow. Resetting the original Xfinity phone will bring the Sim settings back to the Sim card thus fixing your apn settings.
(Another way is to use another phone to edit the apn settings)
I also have Xfinity mobile and it's working fine. Just sometimes my apn gets uncheck and I don't know why
If you messed with bands.
Also make sure you go and download hidden settings from the playstore if you messed with your bands and selected American bands you need to select automatic bands if you messed with radio information page settings.
I messed with bands and it caused phone calls to not work.
---------- Post added at 10:08 AM ---------- Previous post was at 09:31 AM ----------
The Sim saves apn settings and I did notice the first time using this essential phone I had 2 options in the apn and I read carefully which one to select. It may have saved the incorrect information to the Sim. I did this once on a Moto phone and I thought if I put Verizon apns instead of Comcasts I could get better speeds. But I caused my data to stop working. I reset the Moto phone and u still had the problems. I looked for the apn for Comcast couldn't find it. Then I thought of either editing the apn using another phone or using the original Xfinity phone. But it does get saved for sure. I ran into this issue before and I'm pretty sure this will resolve the problems.
goldentequila said:
Thank you for replying. That did not work. I don't think it's Xfinity. The problem is that APN gets locked to VZW instead of Xfinity's APN, which is why data doesn't work. I can put a TMO sim card in it and it works fine, so I don't know that there is something wrong with the phone itself. If you have any other suggestions, I would appreciate it. I'm desperate to get this working.
Click to expand...
Click to collapse
Ever get this resolved?
rootnooby said:
Ever get this resolved?
Click to expand...
Click to collapse
Yes. I manually sideloaded Beta Oreo build, even though my phone already had the official OTA Oreo on it. That fixed the connection issue altogether.
goldentequila said:
Yes. I manually sideloaded Beta Oreo build, even though my phone already had the official OTA Oreo on it. That fixed the connection issue altogether.
Click to expand...
Click to collapse
Wow. Glad to hear your issue is resolved. Who would ever think of going back to a beta build from an official build to fix a connection issue! I may try Xfinity mobile in the near future. Thank you.
rootnooby said:
Wow. Glad to hear your issue is resolved. Who would ever think of going back to a beta build from an official build to fix a connection issue! I may try Xfinity mobile in the near future. Thank you.
Click to expand...
Click to collapse
Yea, it was just a desperate move lol. Glad it'll be helpful for others.
I had the worst time making the XFinity mobile work on Android Pie with the October patches in place and finally got it working. Basically, there was no way to edit the APN configuration even with root on the device via actual Android. What I did to fix this was the following...
-Followed the rooting procedure to get TWRP and Fastboot installed
-I then used "Termux" to copy the APN points configuration file to a writable location. In my case I copied the file from "\system\etc\apns-conf.xml" to a "\sdcard\Download". Keep a copy of the original file.
-I then simply copied the file over to my computer and opened it in NotePad++. I did a search for the following string in single quotes: 'carrier="Verizon"\n mcc="311" '
-This should pull up 5 results in the search and you should confirm that each of the lines has the mnc value set to 480, 'mnc="480"'. On each of the sections that came up, I switched the following variables as shown below...
apn="COMCAST.RSLR.VZWENTP"
authtype="0"
protocol="IP"
roaming_protocol="IP"
-Once you have edited the file, copy it to a writable location on the device, like "/sdcard/Download".
-This then requires rebooting into recovery mode with TWRP and you will need to make sure you have encryption and a PIN disabled on your device to make sure you have full access to the device file system.
-Within the main TWRP page, select "Mount" and you will need to have the "System" and "Data" partitions selected.
-Return to the main page and select "Advanced" and then "File Manager".
-Next, locate the original apns-conf.xml that you copied earlier. It should show up as being in "/system/system/apns-conf.xml". Click on that file, and select "chmod 755".
-Next, navigate to where you have the edited apn file located. Copy that file over to replace the apns configuration file at "/system/system/apns-conf.xml". Just make sure you have a backup of that original file before replacing it.
-Finally, reboot your phone into the OS and you should magically have Xfinity mobile working.
This took a lot longer than I wanted to spend getting it working, but I believe this is because of the carrier ID and MCC being shared with Verizon instead of a separate one for XFinity mobile which forces it to default to the first Verizon APN setting which doesn't allow this to work. There are other ways to edit the APN configuration file, however I found it was quickest to do the actual file replacement with TWRP since that gives you full file system root access.
bschaff1 said:
I had the worst time making the XFinity mobile work on Android Pie with the October patches in place and finally got it working. Basically, there was no way to edit the APN configuration even with root on the device via actual Android. What I did to fix this was the following...
-Followed the rooting procedure to get TWRP and Fastboot installed
-I then used "Termux" to copy the APN points configuration file to a writable location. In my case I copied the file from "\system\etc\apns-conf.xml" to a "\sdcard\Download". Keep a copy of the original file.
-I then simply copied the file over to my computer and opened it in NotePad++. I did a search for the following string in single quotes: 'carrier="Verizon"\n mcc="311" '
-This should pull up 5 results in the search and you should confirm that each of the lines has the mnc value set to 480, 'mnc="480"'. On each of the sections that came up, I switched the following variables as shown below...
apn="COMCAST.RSLR.VZWENTP"
authtype="0"
protocol="IP"
roaming_protocol="IP"
-Once you have edited the file, copy it to a writable location on the device, like "/sdcard/Download".
-This then requires rebooting into recovery mode with TWRP and you will need to make sure you have encryption and a PIN disabled on your device to make sure you have full access to the device file system.
-Within the main TWRP page, select "Mount" and you will need to have the "System" and "Data" partitions selected.
-Return to the main page and select "Advanced" and then "File Manager".
-Next, locate the original apns-conf.xml that you copied earlier. It should show up as being in "/system/system/apns-conf.xml". Click on that file, and select "chmod 755".
-Next, navigate to where you have the edited apn file located. Copy that file over to replace the apns configuration file at "/system/system/apns-conf.xml". Just make sure you have a backup of that original file before replacing it.
-Finally, reboot your phone into the OS and you should magically have Xfinity mobile working.
This took a lot longer than I wanted to spend getting it working, but I believe this is because of the carrier ID and MCC being shared with Verizon instead of a separate one for XFinity mobile which forces it to default to the first Verizon APN setting which doesn't allow this to work. There are other ways to edit the APN configuration file, however I found it was quickest to do the actual file replacement with TWRP since that gives you full file system root access.
Click to expand...
Click to collapse
You couldn't cut and paste the file back with a root file manager? Maybe a magisk module? And does this lock you to Verizon?
Sent from my PH-1 using XDA Labs
avd said:
You couldn't cut and paste the file back with a root file manager? Maybe a magisk module? And does this lock you to Verizon?
Sent from my PH-1 using XDA Labs
Click to expand...
Click to collapse
I'm sure there are other ways to get the file back there, but I found my approach to be a quick bypass for other methods of getting root.
Regarding Verizon, It would probably break a Verizon connection for a sim carrier code of 311480. However, since this post is about Xfinity mobile, this is the quick way I got it working. In the future I want to change the priority on the APN configurations which may allow Xfinity mobile and Verizon to play nicely. The issues that have caused this are Android Pie restricting people from changing settings on the phones they own and Xfinity mobile being either too lazy or cheap to commit to their own carrier code and provide that information to manufacturers.
bschaff1 said:
I'm sure there are other ways to get the file back there, but I found my approach to be a quick bypass for other methods of getting root.
Regarding Verizon, It would probably break a Verizon connection for a sim carrier code of 311480.
Click to expand...
Click to collapse
Breaking a Verizon contract for sim carrier code would be a drastic move, considering.. The only money you have to spend is $5 on a Verizon prepaid phone card. Go into a Verizon corporate store and they will give you a sim, ( it's $20 if you don't go to the corporate store)
Sent from my mata using XDA Labs