Hello guys ! Today i successfully extracted the boot.img and recovery.img of motorola xt320/xt321. Can someone help me to create a cwm recovery?
here is the extracted boot.img and recovery.img www. mediafire. com/?w5bvzsahgrz563d
Can someone help me ? To create a cwm recovery? . I already go to builder.clockworkmod .com/
but it give me a 3 files android_device_motorola_TinBoost, inputrecovery.img and recovery.img here's the link [email protected]/job/recovery/13999/ Just remove the "@" and replace with Dot What to do? Fastboot cannot detect my phone.
why no one replys to my thread? ((( :crying:
What tools you're using to extract the boot.img and recovery.img ?
In the firmware it renamed to recoverysec and bootsec.mbn just change the mbn extension to img
Sent from my XT321 using xda app-developers app
Hello, dear visitors.
In this FAQ I will try to write about how to port the stock firmware within a family of Galaxy Tab 2 7.0. Tab 2 10.1 family might just as portable. About porting between 7.0 - 10.1 and forth until there is no manual)
WARNING:In any ported disconnect FOTA firmware-update and do not update it via kies, Only through repackaging and ODIN.
The most simple porting the firmware at P3110, let's start with him.
If the original firmware from the P3100.
1.Extract the firmware from p3100 with samsung-updates.com to a separate folder, there will be files
System.img
Sbl.bin
recovery.img
param.lfs
modem.bin
MLO
hidden.img
cache.img
boot.img
2.Delete files:
MLO
modem.bin
3.Replace with the files from the P3110/delete files:
recovery.img
Sbl.bin
4.Repack by total commander received the contents of a folder in the archive tar.
5.(Optional) sign the resulting file with a program for a signature. Tar archives (that turned out. Tar.md5 never hit counter custom roms)
6.Getting firmware can easily sew through odin / mobile odin / heimdall
If the original firmware on the P3113 ...
1.Extract the firmware from p3113 with samsung-updates.com to a separate folder, there will be files
System.img
Sbl.bin
recovery.img
modem.bin
hidden.img
cache.img
boot.img
2.Replace with the files from the P3110/delete files:
recovery.img
Sbl.bin
3.Repack by total commander received the contents of a folder in the archive tar.
4.(Optional) sign the resulting file with a program for a signature. Tar archives (that turned out. Tar.md5 never hit counter custom roms)
5.Getting firmware can easily sew through odin / mobile odin / heimdall
Now comes the portable to P3113:
If the original firmware from the P3100.
1.Extract the firmware from p3100 with samsung-updates.com to a separate folder, there will be files
System.img
Sbl.bin
recovery.img
param.lfs
modem.bin
MLO
hidden.img
cache.img
boot.img
2.Delete files:
MLO
modem.bin
3.Replace with the files from the P3113/delete files:
recovery.img
Sbl.bin
4.Repack by total commander received the contents of a folder in the archive tar.
5.(Optional) sign the resulting file with a program for a signature. Tar archives (that turned out. Tar.md5 never hit counter custom roms)
6.Getting firmware can easily sew through odin / mobile odin / heimdall
If the original firmware on the P3110 ...
1.Extract the firmware from p3110 with samsung-updates.com to a separate folder, there will be files
System.img
Sbl.bin
recovery.img
modem.bin
hidden.img
cache.img
boot.img
2.Replace with the files from the P3110/delete files:
recovery.img
Sbl.bin
3.Repack by total commander received the contents of a folder in the archive tar.
4.(Optional) sign the resulting file with a program for a signature. Tar archives (that turned out. Tar.md5 never hit counter custom roms)
5.Getting firmware can easily sew through odin / mobile odin / heimdall
Now comes the hard part: porting to P3100.
1.Extract the firmware from p3110/P3113 In a separate folder, there are files:
System.img
Sbl.bin
recovery.img
modem.bin
hidden.img
cache.img
boot.img
2.Add the firmware files
modem.bin
MLO
3.Replace with the files from the P3100/delete files:
recovery.img
Sbl.bin
4.Repack by total commander received the contents of a folder in the archive tar.
5.(Optional) sign the resulting file with a program for a signature. Tar archives (that turned out. Tar.md5 never hit counter custom roms)
6.Getting firmware can easily sew through odin / mobile odin / heimdall
7.Install the application to work with a 3G module (dialer, etc.)
Enjoy!
what is the different between boot.img and boot.bin I use WindowsLGFirmwareExtract-1.2.1.0-Release extact kdz file got boot.bin?
Nothing. Rename boot.bin to boot.img. Same thing
Sent from my LG-D801 using Tapatalk
Hello everyone,
I was wondering if there was a way to flash aboot.mbn to the aboot partition.
I have tried Heimdall however it does not seem to be compatible with the s5 yet and odin v3.09 and v1.85 also gives me problems and thus far have been unable to flash it. I have also tried the dd command from and android terminal emulator
Code:
dd if=/storage/extSdCard/aboot.mbn of=/dev/block/mmcblk0p6
which also did not work and i do not believe that mobile odin can flash aboot either.
So my question is is there any other way to flash aboot or am i stuck until heimdall updates compatibility?
i am on G900T s5.
Thank You.
If u got adb installed on your pc, using following command
fastboot devices
fastboot flash aboot aboot.img
babygau said:
If u got adb installed on your pc, using following command
fastboot devices
fastboot flash aboot aboot.img
Click to expand...
Click to collapse
I tried but i do not think that samsung adds support for fastboot at all since the use their own download mode for odin and stuff
I am still stuck on this last hurdle, any help welcome thanks
I could really use the help, this is the last thing in my way
cm0002 said:
I could really use the help, this is the last thing in my way
Click to expand...
Click to collapse
Can you not be able to reflash stock firmware using Odin???
babygau said:
Can you not be able to reflash stock firmware using Odin???
Click to expand...
Click to collapse
No for whatever reason odin fails to flash when i package aboot.
i package it as a tar with 7zip, just aboot.mbn file nothing special and no special settings, or am i missing something that odin needs?
cm0002 said:
No for whatever reason odin fails to flash when i package aboot.
i package it as a tar with 7zip, just aboot.mbn file nothing special and no special settings, or am i missing something that odin needs?
Click to expand...
Click to collapse
Odin doesn't flash zip file bro
Why not using Odin to flash your complete stock firmware?
Hi,
I am also stuck with flashing aboot.mbn, did you have any luck since?
ferdossi said:
Hi,
I am also stuck with flashing aboot.mbn, did you have any luck since?
Click to expand...
Click to collapse
what is the purpose of just flashing the aboot.img?
youdoofus said:
what is the purpose of just flashing the aboot.img?
Click to expand...
Click to collapse
in fact I don't just flash aboot, my issue occurs when I try to flash the I9505XXUHPK2.tar bootloader which contains also other files but ODIN stops when trying to flash aboot.mbn
Is it possible to root DQB2 with CF-ROOT DPD3? CF-Auto-Root homepage, dont have DQB2, only MMB29M.G900W8VLU1DPD3.
My Bluetooth dont work on custRom Nougat and try update for fix this problem.
Thanks.
Modem and Bootloader G900W8VLU1DQB2 work with ROM 7.1.2_r2★★VanirAOSP+Commotio★★(06/04/17)
So, Niisan, My Car Bluetooth, no compatible with Nougat for me.
Thanks degener8
Download the full stock firmware file
Extract the .tar.md5 file (I am using 7zip for all extraction/compression as it supports all formats)
Open the .tar.md5 in 7zip
For modem: grab "modem.bin"
For bootloader: grab the following
aboot.mbn
rpm.mbn
sbl1.mbn
sdi.mbn
tz.mbn
Compress the file (or files) with 7zip using TAR compression (leave all settings alone, "store" compression level is what i used)
take the resulting tar file and flash using ODIN (BL for bootloader; CP for modem)
by degener8; 31st December 2016 at 10:28 AM. Reason: Added steps to reproduce.