[Q] Capacitive buttons - Epic 4G General

Anyone having big issues with the capacitive buttons taking multiple times to work?
really just started bad today, previously I was hitting them maybe 5 times before they work. Now I'm having to press them minimum 10 or 15 times before any of them work, and they do not work at all if the phone is laying flat on a surface
Anyone got any ideas?

There was a trick on how to do it, but I kind of forgot. I think they almost always work if you kind of swipe over the button.

Seanc13 said:
Anyone having big issues with the capacitive buttons taking multiple times to work?
really just started bad today, previously I was hitting them maybe 5 times before they work. Now I'm having to press them minimum 10 or 15 times before any of them work, and they do not work at all if the phone is laying flat on a surface
Anyone got any ideas?
Click to expand...
Click to collapse
Had that happen on my old Epic with the back button. You'd have to press hard to get it to work and sometimes it took a few presses. But that wasn't the worst problem with my capacitives. Not long after I got the phone the Menu button started pressing itself repeatedly at random, and the issue would persist through reboots, even before the OS was loaded, etc. It was pretty obvious it was a hardware issue. Problem was, it'd do it for an hour or so during which the phone would be virtually unusable and then suddenly stop and go back to normal.
I remember rushing to Sprint one time with the thing flashing and the sonofabitch stopped right before I got in the door. The guy in the store musta thought I was crazy. "Dude, it was just doing it. It was flashing on and off and popping the settings menu up over and over. Does it all the time, starts and stops out of the blue. No, I'm serious!" Then I had nothing to do but show him my "lazy" capacitive Back button and I got that look from the tech like "C'mon, really?" and so I took it home hoping that the next time the Menu button freaked out I'd be near the Sprint store.
Finally I woke up one morning and the capacitive buttons were completely dead, unresponsive. Was a relief when I brought it into the Sprint store. They had a tech work on it for an hour and said he couldn't get the capacitive contacts parted from the glass (I mean, isn't that one of the things they marked about SAMOLED, the glass has an integrated capacitive layer?)
So they shipped me a brand new Epic, and that's the one I have now.

I took it in about a month ago to show the tech and he said it was working fine o I just had to leave, nothing I could do about it

this has always been a problem for me but being epic is my secondary phone i just deal with it.
how is it that samsung is allowed to get away with such ****ery?

Related

Has Anyone Else Had This Problem?

Okay I've been having this issue since I got my Nexus a couple of weeks ago. Several times a day I'll go to take it out of my pocket or pick it up off a table and when I go to hit the unlock button at the top nothing happens, the screen never wakes up. The trackball will still be lighting up as always but nothing on the screen. I have to pull the battery in order to get it to reboot so I can use it.
Due to this issue and getting dust under my screen I called HTC for a replacement. I got my replacement yesterday and got it all set up again. Within the first 2 hours I picked it up off my table and it wouldn't wake up. And this has probably 4 times since I got the phone yesterday.
Is ANYONE have this issue? I think it's a little weird it happened on my original device and now on my replacement.
Never happened to mine so far that I have noticed. Not that this information helps you any but...
ive bought 2 for me and one for a friend. None have any issues at all so far
I haven't had this problem...
just for the hell of it have you tried restoring it.
DMaverick50 said:
ive bought 2 for me and one for a friend. None have any issues at all so far
Click to expand...
Click to collapse
you bought 2 for yourself and one for your friend? Can I be your friend?
Maybe you're just not pushing the button hard enough, or you need to find a "sweet spot."
I've never had this issue. Is it possible that you have installed an application that could be the issue?
i had this problem too for the first time last night. My notification light was flashing... pressing power button did not wake up.... I even long pressed power buttoin in the hope of getting the shutdown option, but nothing... i did a quick google search to see if there was a way of soft resetting, but couldnt find one, so pulled out the battery.
Its been fine since
No I only bought one of them but had to do an exchange on it because of it not waking up and the screen was getting dust under it. The exchange I got in the mail is still doing the wake up thing.
It's not due to pushing the button wrong I know that much haha. I'm a pretty skilled button presser
Well at least one person knows what I'm talking about. Let me know if it happens to you again
I have 2 nexus ones and one of then does have this issue. I have had it happen 3 to 5 times.
shep211 said:
I have 2 nexus ones and one of then does have this issue. I have had it happen 3 to 5 times.
Click to expand...
Click to collapse
Have you rooted either of them? I'm thinking it's some type of software glitch that might be fixed once new ROMs get cooked up but I've been holding off on rooting to preserve my warranty because of this issue.
Never had that problem.
Just so the forum doesn't just fill up with complaints.
mcarey66 said:
Have you rooted either of them? I'm thinking it's some type of software glitch that might be fixed once new ROMs get cooked up but I've been holding off on rooting to preserve my warranty because of this issue.
Click to expand...
Click to collapse
The one with the issues is rooted. I am using stock rom because I am sending it back soon.
mcarey66 said:
Okay I've been having this issue since I got my Nexus a couple of weeks ago. Several times a day I'll go to take it out of my pocket or pick it up off a table and when I go to hit the unlock button at the top nothing happens, the screen never wakes up. The trackball will still be lighting up as always but nothing on the screen. I have to pull the battery in order to get it to reboot so I can use it.
Due to this issue and getting dust under my screen I called HTC for a replacement. I got my replacement yesterday and got it all set up again. Within the first 2 hours I picked it up off my table and it wouldn't wake up. And this has probably 4 times since I got the phone yesterday.
Is ANYONE have this issue? I think it's a little weird it happened on my original device and now on my replacement.
Click to expand...
Click to collapse
iv been having this prob with the mt3g, tmobile is sending me a new phone im thinking its the htc keyboard apk or the nexus news widget apk, i have never had this problem till i put these two apps on my mt3g
Oh man! I thought I was the only one with this issue! It sometimes a couple of times a day and it's extremely inconvenient! I thought maybe my phone had gotten too hot and it froze or something but I could never figure out why it really happened. Mine is also rooted so maybe that's the issue? I hope someone finds the cause of this problem and even better, a solution, soon. It's pretty annoying, and one of the very few things that I don't like about my new partner.
I must be a lucky sob,beacause my nexus has no problems at all, working vib, no dust under screen, all buttons work, no problems at all (knocks on wood)
I'm having one issue and it can be annoying. Sometimes my screen just doesn't respond and if it does it's miles off. like if I press in the middle, the menu pops up as if the calibration is off by an inch or so. The annoying part is when a call comes in and I can't slide to answer which makes me miss a proper button.
My N1 is not rooted and a reboot normally sorts it out.
Edit: I forgot to mention that this almost always happens after I plug the charger like it is now arrrrgghhhhhhh.
I'm not having any issue with power on button and my N1 is not rooted (yet).

Touch screen random inputs?

I did a DIY digitizer replacement a month or so ago, and its been working great up until a few days ago. Now, when I go to touch one of the soft buttons or type on the keyboard, the phone "flips out" and starts registering inputs in all random spots, sometimes getting stuck on that spot. I am totally stumped.
I double checked and all the ribbon cables are seated and such, and tried flashing over to Modaco rom from Cyanogen (thinking it might be software)... no luck. Can't even replicate it consistently, it seems to have a mind of its own.
Any thoughts as to what is going on?
Well I know that it has been an issue for some people and the general idea is that if you push the power button and put the screen to sleep and then wake it back up 20 seconds or so later it will work again. I have to say to also wipe your screen clean as well, build up on the screen can cause wonky behavior as well. Good luck.
Mike
this sounds exactly like the glitch that all nexus ones have, stock ROM. just lock then unlock the screen and it fixes itself.
the word is that it will be fixed with the 2.2 update. fingers crossed.
I thought it was that issue I read as well, but the power button glitch-fix everyone speaks of doesn't work.
I actually used my pry-tools to unseat the digitizer from the rest of the phone and kinda let it dangle, and 90% of the issues disappeared.
I am wondering if it might be the digitizer pressing up against the metal backing thats causing it to ground out and cause these issues, since the original phone was held in by a foam-type adhesive which I don't have on it now.
that's very possible. the power button resets my glitch 100% of the time. so sounds like something else is going on with yours.
RogerPodacter said:
this sounds exactly like the glitch that all nexus ones have, stock ROM. just lock then unlock the screen and it fixes itself.
Click to expand...
Click to collapse
I don't think its the famous touchscreen issue that we've heard because it was reported to register a click few centimeters below the touch point. Here in this case, the guy says that it randomly registers clicks at different spots.
AlexTheSquid said:
Now, when I go to touch one of the soft buttons or type on the keyboard, the phone "flips out" and starts registering inputs in all random spots, sometimes getting stuck on that spot.
Click to expand...
Click to collapse
I hope that reboot fixes this problem....
I've given up on the task for now, went back to my iPhone 2G till I can figure this out... its definitely not software though... and the digitizer still registers accurately when I don't have it seated into the phone...
No issues here on cyanogen 5. 0. 6 I love this Rom and have 0, yes I said it zero issues..... running solid for almost a month.... sorry ya have them issues I hope ya get em figured out...
As others says, just a quick lock & unlock fixes this. No need to wait 20 secs, I do it right away. Power, power, slide to unlock and I'm back in business.
For me I'd say it happens maybe a couple times a week? What about other people?
On stock it happened like once a week.... for me
none on custom so far after 3 weeks
yeah a couple times a week is it for me too. I wonder if view identified the issue and fixed it in the update. I'm sure some Google employees experience the bug.

Digitizer gone - but not completely dead... Any advice? [VIDEO]

Hey my lovely XDA-ers, I'm really hoping for some magic here...
Yesterday my HD2 digitizer just stopped working... the Touchscreen will not respond to any inputs. It was bitterly cold outside so I was half hoping that an overnight stay in a warm room would help, but no avail...
The thing is, on one in every 5 restarts, I get a small amount of life from it. One one in 15 restarts, I get full use. So there's still life in there.
I could understand if it broke because I dropped the phone/squashed it, but at the time I was just playing Robo Defence, completely normal use, when all of a sudden it stopped responding.
I've uploaded a video, which shows how, occasionally, the bottom fifth of the screen works. However, as shown, when I'm using the top half of the screen, the digitizer appears to be receiving input from the bottom of the screen, as though I'm trying to perform a multi-touch action. For this reason I'm hoping there still be some way to rescue the phone without an expensive repair job. I bought it in March from XDA Marketplace, and it's served me faithfully since, but because of that I do not think I have the manufacturer's guarentee, or insurance
I've hard-reset, I've reflashed my ROM, I've tried in both WM and Android (my usual OS at the moment), I've reflashed over WM ROMs, and the problem stays the same... (also read all related threads!)
Sorry for inverted nature of vid!
So does anyone have any suggestions to try? Otherwise I might go through a £130 repair service on htcrepairs.co.uk - they do not show up on a forum search so I was wondering if anyone had used their service before?
Thanks all, appreciate any ideas.
Edd
Very odd indeed. I don't have a solution for your problem, but a suggestion. It is a long shot, but might help.
Whenever i had similar problems with my Wizard (i know, kind of old but one of the best older devices every made by HTC), i opened it and cleaned it from the inside and checked all the connections of keyboard, touchscreen, etc. to the mainboard. Sometimes it helped...
In the end, if you buy the replacement kit, you anyway have to open the HD2, so why not try this in prior to buying the kit...
A lot of people seem to have this problem. There's a lot of information on it here. Do a search. But the short answer is its a hardware problem. If your phone is still under warranty send it back. I think HTC will fix it for free if It's less than a year old. But try your carrier first.
Sent from my HTC HD2 using XDA App
BAD NEWS...
i had EXACTLY this happen to me. eventually it totally stopped responding. Only option is to replace the digitizer.
GOOD NEWS..
After a month of searching, I found a really good guy to do it. www.iexpertstudio.com . The owner is VINCE. you can email him on his site. He charged $110 including mailing it back to me. He replaced the LCD and digitizer and sent it back. All works perfectly now.
I see you are in the UK so dont know if it makes sense to send it to the US. Alternative is to go on ebay and buy the screen/digitizer and replace it yourself.
(BTW normally i would have chucked the device, but even after 1 year I still dont think there is as versatile a device as the HD2. Had the DHD been 3G useable in the US I would have bought one.)
Thanks for the feedback guys, I've been doing some investigation my end (and you're right, there are similar threads on here, but none which had a "half-screen working" problem.)
I've narrowed the culprit down to my "Back" button. It's somehow exerting pressure on the screen, leading to either a non-responsive digitizer or an input at the bottom of the screen.
I might add this to an entry in the "ANDROID KILLS YOUR BUTTONS" thread
My choice is to live manually with it, or get the company mentioned in the first post to give it a good clean, but whether it's worth £80 just yet is a question for me.
Anyway, thanks for your input, guess this thread will close, but to any readers in future, if your screen seems to die, see if it's pressure on the screen caused by the buttons!
I can totally support your reasoning.
I haven't had any problems whatsoever with the touchscreen in almost a year of honoured career of this phone, while this morning I was trying to unlock it with no success (nothing special happened, I even used it 10 minutes this morning already). At first I thought it was the usual "sleepy" behaviour of the screen right after waking up, butafter sliding down the hdmini style unlocker at least 10 times with no effect I really started freaking out :O
I have longpress endkey set on instant reboot, and after that it seemed working... just not for too long.
To cut to the chase, what in my opinion supports your idea of hardware buttons interfering is:
sometimes, as I have LMT installed, with the tap&hold option enabled, swiping with just one finger triggered double swype instead (as if the screen detected a second, firm press on the screen elsewhere even if I sure as heck was swyping with one finger)
using mymobiler didn't work as well; if it was a hardware touchscreen problem, mymobiler should work, as it simulates touches, so it will just do its job even if the touchscreen is totally dead... while, IF the hardware touchscreen detected a firm press somewhere, mymobiler wasn't able to actively simulate another press
repeatedly pressing on the end key (which seems to be the culprit in my case) apparently solves the problem, as I can use the touchscreen again; also, a prolonged cycle of hibernating with end key, waking with end key, swyping down the hdmini lock (repeat at libitum) seemed to work, as if I dislodged something by activating the button so often
What I don't understand anyway is: HOW can a button pressing on the digitizer be exerting a touch action? If this was a resistive screen, I'd understand, but it's capacitive, and not even capacitive pens are so good as fingers in activating the touch. The buttons are just plastic with a metal contact underneath, and this metal contact shoudl by no means be anywhere near the digitizer.
Bah.
I know I have 2 years warranty on this device, but being far from my phone during the warranty processing gives me the creeps, so I'll just go on using it and pray this to be the defaillance of one sunday morning not to be seen again... after several soft resets (and fantasizing about a new rom flash, which I need anyway for other reasons) the problem seems to have settled by delicately bashing on the end key. The unlock slider is responsive after every wake up now... FOR now.
Praying...
My screen also died. So the only thing I have to do is press on the end key for a couple of times to make it work again?
lol, that's ONE possibility.
Just saying, in my case it worked, and still does since it happened once more this evening, so it's definitely got something to do with the hardware keys messing around (and hopefully dislodging themself for good, or I'll have to send it back for servicing), anyway in your case it could also be a dead digitizer, so no go
let's put all this about touch screen in 1 sticky thread pls.
I've been living for the problem for about three weeks now. It's never got worse, but never got better. It's a livable situation so for the moment I'll deal with it. I might check with HT about warranty, but it's not yet bothersom enough to make me want to flash back to stock, send it off etc. etc.
smeddy said:
I've been living for the problem for about three weeks now. It's never got worse, but never got better. It's a livable situation so for the moment I'll deal with it. I might check with HT about warranty, but it's not yet bothersom enough to make me want to flash back to stock, send it off etc. etc.
Click to expand...
Click to collapse
ditto.
Actually, I don't like having paid good money for a defective phone, but being without HD2 for up to a couple of weeks to one month (maybe? have no idea how fast HTC servicing is) is troublesome. I may buy for a deal a blue angel as a spare, yet, no GPS...
The most problematic event is if you get the "stuck" screen during a call.
In my case, it's the end key that messes it up; if the screen's dead, pressing twice the end key, firmly enough (once for screen off, then again for screen back on) wakes up the screen, and apparently, during a ringing incoming call, you can press the hardware end key without rejecting it, so it's a viable option (not taking into consideration the fact that trying to wake up the screen takes time, and the caller may give up after a while if you're not fast enough).
But if for any reason the screen gets stuck while the call is connected, I am stuck too, as to wake it up I should press the end key thus hanging on the other party.
Sad story.
EDIT: forget what I wrote, pressing end key while phone is ringing WILL reject the call. I tried it before during a real incoming call and apparently it didn't do it, but now it just did.
I also have a HD with a dead screen....
Only thing here is I have sent it back twice already to TelSuck here in Australia only to have it returned after the tech has wiped it over and reflashed it for me... What helpful little imps they are!
Code:
http://www.youtube.com/v/T6ssqmpRIB0
Its drivin me nuts sending it away for 3 weeks at a time to have someone with just enough grey matter to be able to wield a screwdriver tell me nothing is wrong.
Happy to try any suggestions!
@insinr8
this thread is just for half-dead screens where the screen sometimes actually works. Unless you can resurrect it by firmly pressing on the hardware keys, but if it's dead on a regular basis, then it's not our same problem I'm afraid :-(
@OP
while having an "attack", did you try plugging out the microsd to see if it magically solved the problem?
I mean, if it did, it would still be a hardware problem related to the microsd slot, since there is no point for a faulty microsd to mess up the touchscreen, and let it work from time to time
ephestione said:
@insinr8
this thread is just for half-dead screens where the screen sometimes actually works. Unless you can resurrect it by firmly pressing on the hardware keys, but if it's dead on a regular basis, then it's not our same problem I'm afraid :-(
@OP
while having an "attack", did you try plugging out the microsd to see if it magically solved the problem?
I mean, if it did, it would still be a hardware problem related to the microsd slot, since there is no point for a faulty microsd to mess up the touchscreen, and let it work from time to time
Click to expand...
Click to collapse
I will try that - it seems to happen more frequently when plugged in and charging, and now more buttons seem to be the cause/fix (e.g. now the home-button, or when I am on home-screens the phone will swipe "left", whereas before it would swipe "right". I'll keep playing.
I may check out HTC as I reckon my warranty, if I have one, will run out soon... Will still wait til after Xmas as I need my toy for the boring bits of Xmas!
I'm having same trouble now whit my phone except problems started mouth ago. After some period I again power up my phone and suddenly everything worked perfectly. Unfortunately this last only for two days and then exactly same problems happened, partially function screen.
As far as I know only good solution is replacing digitizer... I already ordered one for me.
exactly the same problem for me.. I sent it back with warranty yesterday
smeddy said:
I may check out HTC as I reckon my warranty, if I have one, will run out soon... Will still wait til after Xmas as I need my toy for the boring bits of Xmas!
Click to expand...
Click to collapse
Ditto.
Actually, my warranty lasts two years, which means until 2012, anyway I cannot stand risking to lose calls because the screen dies on me in the wrong moment, and the only way to wake it up is pressing the endkey (which by the way is the only "cure", and apparently never the cause).
I will be uploading a video on youtube regarding this, also to show it to the guys at the HTC support who will be asking me to hard reset and reflash until annoyed to death (as if that will solve anything)
Bump
This is the video that I just uploaded to youtube:
http://www.youtube.com/watch?v=C3-PNYwpYeI
EDIT: One day after, the problem has become way more frequent, 1 out of three times I wake up the phone, diugitizer is dead and I need the " on the end key to make it work
Uploaded another video on youtube with problem showing on vanilla lockscreen so HTC support doesn't try and tell me it's CHT lockscreen's fault
Last bump.
Screen has ben promoted from "hardware key problem" to "permanent death".
Now I can use the phone with mymobiler, but I can't anymore with touch, I seem to not be able even to wake it up even by pressing on end key
Re-flashing last official rom upgrade now to see if anything changes... yeah,sure
Ouch - good luck, hope mine doesn't go that way...

Strange Touchscreen NAND Issues

ok, I have a strange issue that I can not seem to find the answer to. Whenever my phone locks after not being used etc. When I wake it up, the touchscreen will not let me unlock. It takes me close to 50 attempts to do so. However once I actually am successful in getting it unlocked. The touchscreen works flawlessly. I have tried several different builds, all of them I have the same issue. I have done Task29 and started fresh on that front each time. I tried a couple different radios. Any suggestions?
**** man i got the same problem! i tried hard reset, rom updates, other buils but it wont go away!
plz someone help us!
Hi,I'm using BOYPPC-SHIFTPDA GINGER 2.3.3 RAM_V5 works great so far the best that I tried.After u flash android it's recommended to wait few mins until it loads everything then do a shut down - not a restart.then again u wait few mins and u do a second shut down. after that the os should work fine ,at least for me works great. if that doesn't help ,try to reinstall everything from the start..hspl radio etc.
You could just turn off the lockscreen? Get 'NoLock' from the market. That should do the business if you want.
I've got the same problem since 5 days, It started when I started using WIFI and turning off my 3G ..
you have the same problem my hd2 has....it is a hardware issue. the screen becomes unresponsive. if you still have warranty send it in for a repair. if not... repair it yourself. it's not that hard. the screen wire is probably just loose.
follow this video to take apart your hd2.
http://www.youtube.com/watch?v=cL-jnUKufC4
Sounds like a similar problem that I'm experiencing. If I wake the lockscreen with the send key instead, it works. When I boot I get exactly one shot with the end key then it locks up again. I'm able to use it with the send key, but concerned it might get worse. If anyone finds the solution please post.
I actually for the first time had this, and I know this is going to get flamed but its not the Screen thats the problem. And I think (BIG IF) that the dreaded unresponsive screen issue that we keep reading about Majority of them I think is not the screen.
I have 2 HD2s and both have worked flawlessly without any problems, but today I was playing with my test phone that doesnt get used that much and I noticed after installing a new rom that my screen after I played with it for a bit went black (sleep) and when I woke it up it wouldnt respond, first thing that crossed my mind is I just lost my digitizier, and started wondering okay why, I went as far to re-flash WinMo stock HD2 rom, same issue, so I decided its time to find out exactly whats causing this, and I found it. I wasnt going to make a post again cause I figured people would be "Not another thread about this" but I know whats causing the screen issue, at least this is my suspicision and I have temporarily fixed mine.
The problem is HARDWARE, The Culprit: THE END KEY (Red Button)! The Answer to "How or Why": The "End" key is used to turn the phone on and off or to put it in sleep mode, it is the most used key out of all 5 keys, it is used probably 7x more then all the rest, Its used for just about everything, now how does this cause the unresponsive screen? Easy, the phone lock or sleep is associated with this key, Its the only way to make the screen go off other then waiting for the time out period. Because by habit we mostly hit the end key to turn the screen off the phone automatically associates this with locking the phone, once that happens the screen becomes unresponsive because of several reasons: 1) The contact under the actual key has dirt which causes the button to stick in the down position, 2) the contact is bent which the "end" key is pressing down on the contact which is making contact with the board and causing it to be unresponsive, 3) The contact is worn. This is the reason why if you press the end key a few times (anywhere between 2-10) and then try the screen responds, this is cause your "unsticking" the key which then lets the screen respond.
Most of us when we hit the end key press to the far right to avoid hitting the back key (The button with the left arrow) which causes the end button to lean toward the right. But you can wake the phone up with the other 4 keys to the lock screen which will allow you to unlock the phone. As a temporary fix for myself, on my test phone I now make sure to press on the left side of the key to prevent this from happening, since its a test phone I'm not worried, but the real solution is to take the phone apart and clean the underside of the end button, and the actual contact with alcohol to remove the build up of dirt and whatever else. And also if the contact frame is bent to GENTLY bend the right side back up alittle to stop it from happening, or sending it to htc and letting them fix it.
We have to RE-TRAIN ourselves to start using the other keys to wake the phone up and not rely on the end key so much.
Hope this helps anyone finally why we have this problem. And if it works for you then hit the Thanks button

Omnia 7 camera button issues

Hi all,
I've had an Omnia7 since launch and other than having issues with my headphone jack tripping the media controls on occasion, i've not had a problem.
Recently, however, when the camera button has become randomly unresponsive. That in itself is not too big a problem but last night it escalated from just being unresponsive to acting like the button was being pressed repeatedly when it wasn't being touched. In the middle of the night it woke itself up, went to the camera app from the lockscreen (as if the button had a long press) and started repeatedly taking very close up pictures of the surface it was sat on. Pressing the button all the way down stopped this happening, but the moment I let go it would start again. I eventually managed to stop it by repeatedly hitting the button with quite some force, though that isn't something I'd want to be doing regularly if it happens again.
It seems to be a hardware issue, but I thought I'd check if it was a known, fixable problem or is it a unique hardware failure?
I've had a similar issue with mine (sometimes would act like yours, other times to take a picture I had to put some strength on it). Solved it with electric contacts cleaning spray.
Ahh, fair enough, thanks for the info. Dirty contacts makes sense. I might get some spray and trying cleaning them.
I need to get the phone working again first though, as it decided to brick itself today. The battery ran out, I plugged it into my computer to charge and it booted to the screen with the nice diagram telling me to connect to a PC and Zune loaded on Windows saying it couldn't perform a restore. It just boots to that screen constantly now, which is a bit bizarre as I literally had done nothing with it for a couple of days. At least it had good timing dying 6 days after I bought a Lumia 920 rather than before.
Thanks for the information.
My Camera Button is not working anymore, it feels normal but does not do anything. I sprayed some CRC there but it did not do anything. I need to get to MAGLDR so I need the camera button.
Maybe internal contacts broken, try open the Phone is very simple just to reach the side buttons.

Categories

Resources