Related
I'm not sure how this will be taken by the people here. Everyone seems really helpful when other people ask questions or need help so I may be surprised, but after rooting my Incredible last night and then trying to look into boot animations, removing bloatware and other things I was left with some feelings that took the joy out of being rooted and I wanted to share them.
Laugh if you will, insult if you feel it's necessary. I'm old enough to be able to handle it but beyond all of that I just wanted to say that the "rooting community" are a brilliant bunch of people. The things that you guys do boggles my mind. Since I only just registered I'm forbidden to post links, but if you're so inclined to go read it here it is.
ishootpixels.tumblr.com/
EDIT: I'd also like to add that my wife's netbook is running XP and not Vista. I forgot that we downgraded it (or upgraded however you want to look at it). I've gone back and changed my blog post.
If you would like some help getting where you want to be, PM me and I would be glad to help. I am far from an expert, but after scouring these forums endlessly, I am quite familiar with the process.
@mtag1029 Thanks. I guess my first problem is that whenever I type in "adb" anything, I get that "adb is not recognized as an internal or external command, operable program or batch file."
I've used this method to connect the phone to the netbook...
1. Boot into Clockworkmod recovery by powering off the phone and pressing and holding the volume down and power button until the screen lights up.
2. At the menu press volume down to select Recovery, then press power.
3. At the Clockworkmod main menu select partitions menu, then select mount /system
4. On the computer click Start > Run, and type CMD to open a command prompt.
5. In the command prompt type cd\sdk\tools
6. At the command prompt type adb shell. Now you’re in the phone’s OS.
and I get as far as step 6 before I can't go any further which is where I get that message. Right now I'm trying to install a boot animation and sound but I'll also need to be able to get beyond this in order to remove the bloatware. What am I doing wrong?
And THANK YOU again for the help. I'm almost to the point of returning it to stock so I'll at least be able to get Froyo whenever it's released OTA, but I've come so far at this point I'd hate to throw it all away and go back to stock.
IShootPixels said:
5. In the command prompt type cd\sdk\tools
6. At the command prompt type adb shell. Now you’re in the phone’s OS.
Click to expand...
Click to collapse
Assuming your sdk folder is in the root of the C drive (i.e. C:\sdk\), the command in step 5 is wrong -- it's supposed to be:
Code:
cd \sdk\tools
with a space. That should get you into the C:\sdk\tools directory, where adb is.
Not sure if the lack of spacing was just a typo, but if not, there ya go Let me know how it works
edit: Just tried cd\sdk\tools, actually works, I thought there had to be a space, but maybe not. I guess the next step would be to make sure there's an adb.exe in your tools folder?
I created a file folder under Local Disk C called "sdk" and inside that I created another folder "tools". I couldn't find folders that were already named this so I created them myself. That may be wrong so it wouldn't surprise me if that's my first mistake.
Beyond that, when I get into running command lines I have gotten to where it looks like this...
C:\sdk\tools>
No spaces. I'm taking a pic and trying to attach it if my noob status on the forums will allow me.
I don't have the exe file. I didn't need it to root the phone. I don't know where to even get it.
IShootPixels said:
I created a file folder under Local Disk C called "sdk" and inside that I created another folder "tools". I couldn't find folders that were already named this so I created them myself. That may be wrong so it wouldn't surprise me if that's my first mistake.
Click to expand...
Click to collapse
If you just made the folders, there's nothing in them -- if you go to the tools directory and type "dir", there probably won't be any files unless you extracted some in there.
From the how 2 adb thread by dreamersipaq:
1) Setting up ADB
ADB stands for Android Development Bridge. It is used by Android developers for programming. For us, it is used to hack into our phones . For our purposes, just know that it is like the cmd (command prompt) that allows us to send commands to our phone. This is extremely useful when we're in the custom recovery
Download the Android SDK from Google: http://developer.android.com/sdk/index.html
Unzip to your desktop
Take the "android-sdk-_**-windows" folder and move it to the root of your hard drive (C:\)
** will change, it is revision of SDK, like "r6"
****The below is not necessary, but is useful sometimes if you just want to run "adb shell" from anywhere without going into the sdk directory****
Right click on My Computer and click properties
Select the Advanced Tab or Advanced System Setting (Vista/Windows 7)
Select Environment Variables...
Press New
For Variable Name type: adb
For Variable Value type: C:\android-sdk-_**-windows\tools
****End of the "This is not necessary thing****
Click to expand...
Click to collapse
edit: the rest of that thread is located http://forum.xda-developers.com/showthread.php?t=709220 there, if you're interested
gmonox is absolutely correct. You cannot just create the folders. They have to come from the sdk.
Another thing. You mentioned in your blog post that you would like to have froyo. Froyo should be flashed before removing any apps becauseeverything that you have removed will be put back in with froyo.
Wow, that was a pretty necessary step that I never knew about. Okay, so I DL'd, unzipped, and copied the folder to the root of C. Question, do I have to rename the "android-sdk-windows" folder to simply "sdk" when following the directions I listed earlier or do I leave it and at the command line type...
cd\android-sdk-windows\tools
I also didn't do the "advanced" part of the post simply because it's my wife's PC and I'm really not in the mood to screw up anything else today.
EDIT: And about Froyo, right now I just want to see if I can get a little boot animation working before I even THINK about tackling ROMs, Kernals or anything else. Although I know that most ROMs have the kernals that are optimized for that particular ROM if I've read things right. I realize Froyo is not a mod so it won't have an overclocked kernal but I read that others might. I've read that Froyo packs in VZ Nav (like I didn't have enough of that crap with my old Blackberry) amongst other things. If nothing else, I'm really good at reading about all of the things that I wish I could do.
IShootPixels said:
Wow, that was a pretty necessary step that I never knew about. Okay, so I DL'd, unzipped, and copied the folder to the root of C. Question, do I have to rename the "android-sdk-windows" folder to simply "sdk" when following the directions I listed earlier or do I leave it and at the command line type...
cd\android-sdk-windows\tools
I also didn't do the "advanced" part of the post simply because it's my wife's PC and I'm really not in the mood to screw up anything else today.
EDIT: And about Froyo, right now I just want to see if I can get a little boot animation working before I even THINK about tackling ROMs, Kernals or anything else. Although I know that most ROMs have the kernals that are optimized for that particular ROM if I've read things right. I realize Froyo is not a mod so it won't have an overclocked kernal but I read that others might. I've read that Froyo packs in VZ Nav (like I didn't have enough of that crap with my old Blackberry) amongst other things. If nothing else, I'm really good at reading about all of the things that I wish I could do.
Click to expand...
Click to collapse
Either way works. I renamed mine sdk because I'm too lazy to type android-sdk-windows every time I want to go into adb shell. But it's up to you
Ok, I'm guessing that my question will be answered after I run the setup. I didn't see the link at first to the thread. Apparently my wife's netbook doesn't even have the right java ver. to run the setup.
This is making my brain hurt.
I should have asked this earlier, have you made a nandroid backup?
LOL. Actually as soon as I finished rooting the phone I DL'd Titanium from Marketplace and installed it and BusyBox and made a backup that way. Then I remembered Nandroid and went in and backed up that way too. Probably overkill but the whole process has scared the crap outta me. I wouldn't know how to apply these backups, but at least I have them.
At the moment I'm installing the Documentation for Android SDK, API 8, revision 1
EDIT: This is going to take awhile I'm guessing. Installing SDK Platform Android 2.2, API 8, revision 2
Okay. The nandroid is the most important. It will save your butt if something goes wrong.
IShootPixels said:
LOL. Actually as soon as I finished rooting the phone I DL'd Titanium from Marketplace and installed it and BusyBox and made a backup that way. Then I remembered Nandroid and went in and backed up that way too. Probably overkill but the whole process has scared the crap outta me. I wouldn't know how to apply these backups, but at least I have them.
At the moment I'm installing the Documentation for Android SDK, API 8, revision 1
Click to expand...
Click to collapse
Both types of backups are easy to restore, for nandroid you just go into recovery, same place as you backed it up but click Restore and just wait for it. For titanium, go into backup/restore, batch, and there's an option to restore apps, apps+data, and apps+system data I think. If you have the paid version, the apps will all install on their own, but if not I don't think they will.
Are you still on a netbook or can you use a pc? Might be easier if your java's out of date and whatnot to just use a pc, I'm no expert on netbooks but I'd imagine they're stripped down a lot
gmonox said:
Both types of backups are easy to restore
Click to expand...
Click to collapse
Just keep in mind that you need a functioning phone in order to use Titanium. If you mess something up while in adb and the phone will not boot, Titanium is useless. A nandroid however will restore you back exactly how you were before messing around in adb even if the os will not boot.
Well then I'm glad I did the Nandroid BU! Bsically then I guess that because I backed up with Ti first and then with Nandroid, the Nandroid created a back up of my Ti backup. If so I think I just set a record for redundancy.
As for using a netbook, I don't have a choice. I run everything off of my Macbook, or did until now. The only Windows based item in the house aside from my Xboxes is my wife's netbook. I've updated the Java and begun the setup process. I had to do as the thread said and force the http and then go into the available packages and I'm DLing and installing them all because I was afriad that if I didn't I'd find that I needed one I hadn't installed. I'm guessing that since I'm already rooted (and I'm hoping) that once I'm done installing all of these packages that that should be it except for step #4 and #5.
1. Run SDK Setup.exe
2. If it gives you any error go to settings and click on "Force http//....."
3. Select usb driver package, let it download and install
4. Some say the below step is not needed, but I did this so I'm posting it
Go to tools folder, and edit "android_winusb.inf" (you can do this by opening it via wordpad). Add the following at the end of the [Google.NTx86] and [Google.NTamd64] blocks:
;HTC Incredible
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C9E
%CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C9E&MI_01
%SingleBootLoaderInterface% = USB_Install, USB\VID_0BB4&PID_0C94
Save the file and exit.
5). Plug your phone into PC, when windows asks to install drivers for new found hardware, point the New Hardware Found wizaed to android_winusb.inf that you just edited.
I'd also like to add that this is the YouTube video that started this mess. I followed his tutorial on rooting the phone and although the sound was low it was pretty spot on minus one or two things he failed to mention.
However, after watching this video I thought it would be just as easy to install the boot animation as it was to root the phone. Seems the bigger task would be rooting rather than a boot animation. In the hours that you guys have helped me I've learn that this boot video lacks a TRUCK LOAD of information and assumes that the person watching it isn't a noob. Dont' most people that watch tutorial videos watch them because they have no idea what they're doing? I realize now that there's a ton o' stuff missing from it. I still want the animation and sound though.
http://www.youtube.com/watch?v=-Ju9lpH7_4g&feature=channel
Titanium stores backups on your SD card. Nandroid does not backup your SD card, but you are in good shape. Keep us posted.
I'm not sure if step 4 is required, I'm on win7 64bit and I don't recall doing it, but I guess it couldn't hurt. Also, I don't think nandroid backs up your titanium backup -- Ti backup is stored on your SD card
I just want to give props to a program for windows called Android Commander. I am not sure if its been mentioned on the Vibrant forum yet, but it got me out of a major jam today.
Android Commander is basically ADB with an easy to use interface. It lets you pull and push files to and from your pc to your Android device.
Story:
I tried to MM the Androdena theme but it seems the framework was corrupted and caused me to keep me in a forceclose loop not letting mount or boot or really do anything. I did make a nandroid backup but some how deleted the CW update zip from my sd at an earlier date and could only boot up into the stock recovery. I was ok with having to reflash the stock rom using Odin, but needed some important pictures that I took for work. Needless to say I starting freaking out. I have ADB set up but only know a few basic commands and I'm sure what I needed to be done could have been done from there. I started searching for solutions on Google and found this awesome program.
I was first able to move the picture folder from my sd card to my pc, then move and rename the CW update.zip to root of the sd card in turn letting me boot into CW recovery and restoring my nandroid.
The only thing I needed to do was to make sure my device was online through ADB and Android Commander was able to find the device and show me all my files and such. Its a great program, and I highly recommend it if you are not familiar with ADB.
I will need to check this out when I get home. I want an easy way to remove the bloatware on my phone.
it seems like an interesting program, and would be good, but for me it doesn't show that i have root. it tells me "root no" and when i use the console in it and use the su command it tells me no. but still a good program over all, i did some looking around and i believe it will only show you have root access if you have an APP2SD installed. i might be wrong with that, but atleast if anyone else has the same trouble with it please let me know if you figure a work around.
ps, you can view root files and folders just not push or pull anything from them.
Yep, I am seeing the same thing.
I did some research on Google and this is what I came up with:
"adb remount and adb root are protected commands and need either a rooted kernel or a flashed recovery model to run" - Source: Rastaman-FB
ah I see. That's good to know. I guess ill be sticking with just the normal ADB. But I think the program will still be very useful for other stuff considering we don't have to mount the USB so no rescan media after the unmount. That alone is a keeper for me. Thanks again for the information pal.
Sent from my SGH-T959 using XDA App
I must say
I have been using android commander since his 1st beta on all my android rooted phone..
It is the best android tool Out there.
Im usually private about the tools I use but
Android Commander (By PanPiotr) is the best and easiest adb GUI tools out there.
Features
Explore files:
- copy multiple files/dirs between Phone and PC
- copy multiple files/dirs between Phone folders
- delete multiple files/dirs from Phone
- new dir and rename options
- drag&drop multiple files/dirs in to progrm
- drag&drop files/dirs between program tabs
- partitions size info
- bookmarks
Manage apps:
- windows integration
- backup multiple apps to any dir on Phone/PC
- batch/single apps install
- install as private
- update
- batch/single uinstall apps
- uninstall with option to keep data or not
Console:
- type any shell command
- run sh script from PC
and more…
- flashing zip and img files
- options to reboot, reboot to recovery, reboot to bootloader, power off phone
- screenshots (beta)
Stupid question. I accidently deleted my update.zip file and I attempted to reflash another rom. Of course now I'm stuck at the Vibrant Logo and tried to use this app. It says its trying to connect, but never does. I have SDK installed, but I think its the version from when I was tinkering with the G1.
I got into Download mode with the BIG yellow triangle, but my PC never seems to show anything connected via USB unless I try connecting via Recovery.
This app sounded like something would help me since I'm not very good at ADB, but I guess I'm having issues getting over the first hurtle is seems. LOL
Qverse said:
I have been using android commander since his 1st beta on all my android rooted phone..
It is the best android tool Out there.
Im usually private about the tools I use but
Android Commander (By PanPiotr) is the best and easiest adb GUI tools out there.
Features
Explore files:
- copy multiple files/dirs between Phone and PC
- copy multiple files/dirs between Phone folders
- delete multiple files/dirs from Phone
- new dir and rename options
- drag&drop multiple files/dirs in to progrm
- drag&drop files/dirs between program tabs
- partitions size info
- bookmarks
Manage apps:
- windows integration
- backup multiple apps to any dir on Phone/PC
- batch/single apps install
- install as private
- update
- batch/single uinstall apps
- uninstall with option to keep data or not
Console:
- type any shell command
- run sh script from PC
and more…
- flashing zip and img files
- options to reboot, reboot to recovery, reboot to bootloader, power off phone
- screenshots (beta)
Click to expand...
Click to collapse
I'd say it's ok at best. I don't know of any other ADB GUI tools but this one doesn't work well with my Vibrant.
StrayPanda said:
I'd say it's ok at best. I don't know of any other ADB GUI tools but this one doesn't work well with my Vibrant.
Click to expand...
Click to collapse
I'm going to have to agree with this. Is nice to have but doesn't play nice with the vibrant.
Sent from my SGH-T959 using XDA App
It sometimes is very slow in reading internal sd memory on samsung vibrant and it loads up as a blank screen. Disconnecting usb cable and refreshing does the trick for me.
Sent from my SGH-T959 using XDA App
Cornea's coming back! This thread will have a link to another thread for the new Cornea. Wow, threadception.
Cornea
Cornea is based upon my Motorola XOOM program, XOOT.
It's hard to explain...so I'll try my best.
Check out Cornea's official site at Site is down
THERE ARE TOO MANY ONE-CLICK SOLUTIONS FOR ANDROID.
Cornea has the ability to combine these into one application.
All you need is a toolkit for your Android device. (You can find these in the post below). Copy this into Cornea, and Cornea can suddenly do so much more with your device.
CAN'T FIND A TOOLKIT FOR YOUR DEVICE?
The best thing is, you can develop your own toolkits too. You can find out how to do this in Post #3
In my eyes, this is a revelation for Android hacking.
The possibilities are infinite. Make a toolkit that operates with your bootloader, or one that hacks your recovery. Or make an AllInOne toolkit that has the best of both worlds.
n00b FRIENDLY
It's easy to use for n00bs and hax0rs alike. It eases you through the first worrying steps of hacking, and you've also got a whole forum full of moderators and developers to help you out.
THE KEY TO THE LOCK OF RECOGNITION
If you've made your own toolkit, send it to me and I'll add it to the below post for public download!
Created by Epic118/FaizSaleem118
[Below post: Download Center - download Cornea and toolkits for your device]
[Post #3: Cornea Development Guide]
Download Center
Cornea's coming back! This thread will have a link to another thread for the new Cornea. Wow, threadception.
Change logs
v4.0 (TBA)
A fantastic, easy to use, intuitive GUI.
All toolkits upgraded to GUIs!
The Toolkit Download Center - download toolkits that work on your device only to reduce risk
Fastboot Flash UI - a user interface for the fastboot tool
Internet integration, with Help and Q&A built straight into the application. No need for fiddly websites!
Automatic OTA updates thanks to a new OTA daemon
Works on Windows XP properly. In fact, to guarantee this, the entire of Cornea will be built on XP.
Automatic %PATH% association: No need for administrative privileges like before
Even more!
v3.0 (planned) (NEVER RELEASED)
UNKNOWN
v2.0 (03/24/2012) (LOST)
No more metadata or EXEs - a simple BAT that'll work on all Windows computers
Many more tools for devs!
Official support for Cornea GUIs
OTA toolkit downloading
Universal toolkit enhanced
v1.2.2 (02/13/2012)
Changes version metadata from 0.1.2.1 to 1.2.2.0
Cornea now recognises if a toolkit exists or not, rather than stating "Toolkit not signed" and then FCing
Revamped Readme for easier usage (now includes tiimestamp)
Cornea.sc.bat included in case you want to modify it (find it in the sc folder)
v1.2.1 (03/12/2012)
Icon added (eye with HTC phone in the middle)
Converted into EXE format (no more twiddly batch files)
'Obese' toolkits (toolkits with adb binaries) are now rejected by Cornea
v1.2 (02/11/2012)
Universal Toolkit added
v1.1 (02/10/2012)
Removes ADB binaries from toolkits and adds them to C:\Cornea
v1.0 (02/08/2012)
Initial release
TOOLKITS
3 Toolkits Available.
That's not a lot. However, expect more, both from me and from the XDA community!
To use a toolkit, use WinRAR to EXTRACT HERE and then copy the new folder to Cornea's tooklit folder
Downloads can be...downloaded from the bottom of the page.
Motorola XOOM (Wi-Fi tested, 3G/4G may not work)
Bootloader lock and unlock
Flash CWM recovery (Tiamat)
Root (thanks solarnz, for your Universal Root thing)
Flash to stock images/convert to GED
Flash a non-CWM bootanimation.zip
SAMSUNG Galaxy Ace (limited. S5830, will be updated to have more features soon)
Flash CWM recovery (official)
Enter recovery mode if you have jammed buttons
Odin mode (copies Cooper.ops to Desktop, kicks device to DownloadMode and then opens Odin)
Universal toolkit
Included from Cornea 1.2
Install APK files to /system/app, /data/app and /sdcard
Send shell commands via ADB shell
Push and pull files
Remount system as r/w
Reboot into any supported mode (system, recovery, fastboot, download, rsa)
Show logcat
Cornea's official download site is down, use the mirrors!
Mirrors - Mediafire
Mirror - Cornea 1.2.2
Mirror - Cornea toolkit - S5830
Mirror - Cornea toolkit - XOOM
Cornea Source Code Center
Cornea's coming back! This thread will have a link to another thread for the new Cornea. Wow, threadception.
For the meantime, there'll be nothing here.
Looks great.... waiting for the galaxy ace version...
Anyone brave enough to have tried 3G xoom, as it states it might not work.?
I like the sound of this. Might look into making one for the EVO 3D.
What functions can be written in scripts?
Sent from my SCH-I400 using xda premium
I think something like this (ONE common, extensible 'hacker' platform) is sorely needed. I see tweak threads, but each dev goes his/her own way about it.
One suggestion: Remove the adb files from the toolkit folder, so toolkits are much smaller and one doesn't have 20 copies of adb.exe.
Cornea/
cornea files
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
MySampleToolkit/
toolkit .bat files [Provide a template to setup ../adb.exe reference.]
other files (opt)
Hmm... I don't use ADB, but could the toolkits be written in "sh" style. That way Cornea could also exist as a sh script for rooted BusyBox users?
Just my $0.02.
P.S. I vote option 4: I do/don't know how, but I would rather use other peoples' toolkits.
ciscogee said:
What functions can be written in scripts?
Click to expand...
Click to collapse
From inferring and a 30 second review of the code...
A) On the PC, toolkits are "DOS" batch files. For functions (in the program flow sense), you can do whatever you want with all the quirks of batch files.
B) To change something on your phone, you are using ADB. Read the documentation to learn more. (Personally, I've never used ADB.)
I'm glad to hear that people like the idea of Cornea. I'm a n00b too.
Implementing ADB into Cornea would be a good idea. I was contemplating that but it'd be pretty difficult to do that, particularly if people are browsing through folders during runtime and the like. I had found a way to do it, which was to do it via calling the *.bat instead, but when I got up, my inbox already had a few toolkits in there, and I really couldn't be bothered!
One way I could do this is make an installer for Cornea that copies ADB-required files to C:\Windows\system32 and then update Cornea...tell me what you think!
Also you can execute BusyBox SH files...if I'm right, you could adb push it to a working directory, then do adb shell sh, and then when done you could use adb shell rm to remove the file?
Haraldr Blaatand said:
I think something like this (ONE common, extensible 'hacker' platform) is sorely needed. I see tweak threads, but each dev goes his/her own way about it.
One suggestion: Remove the adb files from the toolkit folder, so toolkits are much smaller and one doesn't have 20 copies of adb.exe.
Cornea/
cornea files
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
MySampleToolkit/
toolkit .bat files [Provide a template to setup ../adb.exe reference.]
other files (opt)
Hmm... I don't use ADB, but could the toolkits be written in "sh" style. That way Cornea could also exist as a sh script for rooted BusyBox users?
Just my $0.02.
P.S. I vote option 4: I do/don't know how, but I would rather use other peoples' toolkits.
Click to expand...
Click to collapse
Oh, sorry! I completely forgot your last question! Erm...no, I can't write it as an sh file because I'm uneducated on the subject. Maybe someone could help who could?
I'm keeping my eyes on this because I think it's a good idea and sorely needed. Before I try to get this in the portal can you add a list of tweaks included in the kits you have already released? Also, any new kits expected soon?
Bentenrai said:
I'm keeping my eyes on this because I think it's a good idea and sorely needed. Before I try to get this in the portal can you add a list of tweaks included in the kits you have already released? Also, any new kits expected soon?
Click to expand...
Click to collapse
1) I will do so, yeah.
2) No kits from ME expected soon, because I only own a Galaxy Ace and a XOOM, both of which have a kit from me.
Provided you still have those retired devices, you could make quite a few kits - it's pretty simple and easy to do. Even if you don't, it'd be interesting to see some Nook hacks.
Error (509)
This account's public links are generating too much traffic and have been temporarily disabled!
Dropbox isn't too happy.
Anyway we can get a mirror?
Thanks for your hard work! I can't wait to take a deeper look into this.
epic118 said:
1) I will do so, yeah.
2) No kits from ME expected soon, because I only own a Galaxy Ace and a XOOM, both of which have a kit from me.
Provided you still have those retired devices, you could make quite a few kits - it's pretty simple and easy to do. Even if you don't, it'd be interesting to see some Nook hacks.
Click to expand...
Click to collapse
Yeah I was gonna try to make a bloat removal script for the E3D but I'm not too versed in the workings of my Nook so I don't have any decent idea there. Actually, on second thought, I can probably whip up one that fixes the market, netflix and the screen density but that's aboot it. I'll get started on it later tonight.
Anybody got a mirror up?
Bentenrai said:
Yeah I was gonna try to make a bloat removal script for the E3D but I'm not too versed in the workings of my Nook so I don't have any decent idea there. Actually, on second thought, I can probably whip up one that fixes the market, netflix and the screen density but that's aboot it. I'll get started on it later tonight.
Anybody got a mirror up?
Click to expand...
Click to collapse
Mirrors now up on both mediafire.com and cornea.site40.net (preferred, Cornea's official site!)
Most new toolkits'll be up on Cornea's official site. Usercreated ones will not be uploaded to mediafire by default. If you want a mirror, you'll have to upload it by yourself and send the mirror URL to me.
Does anyone get a compatibility error message when trying to start Cornea.exe?
Using Win7 32bit. Should I be starting it from a command prompt? I read the README but it didn't specify anything besides moving & renaming the files directory to the root and appending the environment variables path.
I have a feeling this post is going to be REALLY embarrassing for me.
OK, lay it on me. I'm ready. Which stupid human error did I commit?
R1150GSA said:
Does anyone get a compatibility error message when trying to start Cornea.exe?
Using Win7 32bit.
Click to expand...
Click to collapse
That shouldn't be. I've tested a lot, and Cornea has been mostly flawless.
R1150GSA said:
Should I be starting it from a command prompt?
Click to expand...
Click to collapse
No.
R1150GSA said:
I read the README but it didn't specify anything besides moving & renaming the files directory to the root and appending the environment variables path.
Click to expand...
Click to collapse
That's all you SHOULD have to do. Of course, you're having problems.
R1150GSA said:
I have a feeling this post is going to be REALLY embarrassing for me.
Click to expand...
Click to collapse
No, it won't. Even the best of us make mistakes.
R1150GSA said:
OK, lay it on me. I'm ready. Which stupid human error did I commit?
Click to expand...
Click to collapse
None. In fact, if anything, it's probably my fault. You see, I use a BAT-EXE converter to finish off my batches, and I must have accidentally chosen 64bit compiling instead of 32. (Sorry, I'll fix it when I've got time!)
In the meanwhile, you can use the Cornea batch sourcecode, which is included with the Cornea download. It's in the same folder as Cornea.exe, but it's called Cornea.sc.bat (or it's in the /sc folder, depends which version you've got). It's exactly the same thing, and there's not much (if any) difference other than the missing metadata/icon.
Have fun using Cornea!
Epic118
You call this a website?
SHUT UP!
Makes me remember smosh! haha
If you want I'll make you a nice site for free
Take a look at my stuff in my signature......I started making toolkits for different devices some time ago. If you look at my source you can get some new ideas and features
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Background:
It all started with me often finding myself sending small files to my device, and quickly got sick of the constant enabling/disabling of USBMS on my old phone, which is quite slow with re-mounting the SD card(ZTE Blade).
I also quickly got sick of not being able to quickly transfer files from my PC to my tablets internal storage.
There are a few graphical interfaces for adb out there, but none was really what I wanted...
So I decided to attempt to code something myself, and here we are!
Info:
A graphical UI for "adb push" to quickly transfer files from your PC to any location on your Android device.
.... Thats what I planned when i started, and what the first 2 versions did...
Now it hosts a powerful File Explorer thats capable of doing everyday tasks such as copy, paste, rename, create folders, delete files and folders, as well as transfering files on its own.
Features:
The main application is capable of sending and receiving files, and installing APKs.
It also serves as the connection-manager as can connect to devices using either your USB Sync cable, or by using WLAN (req. an app on your device to enable wireless adb).
Finally, it hosts a few other functions such as reboot to recovery, reboot to bootloader and a plain reboot.
The Filebrowser is very similar to any other filebrowser you use everyday on your PC.
It can copy/cut and paste files and folders within the device, rename file and folders, create new folders, delete files and folders.
Highlights would be:
Browse the content of your device like you browse your PC's harddrives
Drag and drop files between your PC and your Android device
Move, copy, delete and rename files and folders
Limitations:
The main program does not detect case sensitive, which can end up with funny results if you push a file to "/removable/" instead of "/Removable/" for example.
ADB is only capable of sending 1 file at a time, but is capable of sending whole directories incl. subdirs.
In a future update, I will add the ability to send multiple files.
Getting started:
Everything should be self explanatory. Most of the buttons have tooltips that tells you what they do.
Basically you make sure USB Debugging is turned ON on your device, plug it into your PC and start Quick ADB Pusher.
If you are connecting using a USB Cable, the application should find it automatically.
If you're connecting through wifi, you will need to type the IP address in the dedicated field. Port only needs to be provided if you are using any other port than the standard 5555. The IP address will be saved, and you can select it from the drop-down list the next time you start the application.
Requirements:
An Android device.
Windows
.NET 3.5
USB Debugging turned ON.
Additional Recommendations:
Root
Busybox
Vulnerable Kernel or Custom ROM
Q&A
Q: My device is rooted, but the program says it cant get root access
A: You are probably on stock rom or kernel. Most shipped roms have root-access from adb blocked.
To check this: Open default.prop located in the root of your device ("/"). If ro.secure is set to 1, thats your issue. Note: Default.prop gets overwritten everytime you restart the device, so changing this file will do nothing.
Theres is an app available that can fix/bypass this: http://forum.xda-developers.com/showthread.php?t=1687590
Q: The cache didnt delete itself when I closed the app!
A: You have two choices here: Either delete the cache/ folder located in the same location as the adb pusher exe, or you can just open and close the program.
If the cache still wont delete itself, report it as a bug.
Q: I cant connect to my device over wifi!
A: Make sure you have an app on your device that enables wireless ADB and that its turned ON. I personally use adbWireless found on the Play Store.
Double-check you are attempting to connect to the correct IP and port.
Q: Whats the "Information" window good for?
A: Its actually a left-over debug window, but can provide you with useful information should a transfer fail. If nothing else, you can use it if and when you report a bug.
Note that the Info window only shows what the main program is doing. ADB Explorer works independently, and will not report anything to the Info window.
Q: Why do I have to click a button to switch between push, pull and install?
A: The program need to knows which adb command to run (adb push or adb pull), and having a button for it was the easiest way for me .
The install option is there because you might not always want to install an .apk, but rather store it on your SD card or something. I know I do.
Q: Why cant I send a whole folder to my device from the main program?
A: Old implementation, use the built-in ADB Explorer instead, which allows you to send whole folders.
Q: Whats the point in the main program, when the Explorer can do everything but better?
A: At the moment it still controls the actual transfers as well as the connections to your device(s).
The main program is, however, more or less untouched since v0.3, while the Explorer is constantly being updated. Therefore, the Explorer hosts more and better features.
I am concidering removing the main form, as its rather obsolete by now.
Q: I Have a question!
A: Feel free to ask in this thread, and I'll answer your question as best I can.
Q: Can I donate?
A: No, I dont feel this program is worth "paying for" and it wouldnt feel right to receive money for it in any form.
Hit 'thanks' and vote the thread 5stars instead
Q: I Found a bug, how do I report it?
A: Report it to me on this forum, either in the thread or through PM, and I'll make sure to look into it.
Just make sure to provide as much info you can.
And remember: I cant fix anything if I dont know about it! So dont hesitate reporting bugs.
Changelog:
v0.5 current version
First of all... v0.4.1 had 6570 views on the attachement alone. Not bad... :victory:
Added an awesome splashscreen! As those who have used this program before should know - the program takes a while to load. The splashscreen is visible during this load, so you know the program is actually starting.
The wifi-field has been redesigned. It now saves your IP adresses so you dont have to retype them every time.
Added an "X" button next to the wifi-field. This button clears the wifi-cache and removes all entries in the list.
Added my name with a link to this thread, Ive seen my program hosted at a few sites with no credit whatsoever. I dont mind anyone hosting it elsewhere, in fact Im happy it gets spread, but PLEASE at least give me credit for it.
Slight redesign
Added tooltips to both the main application and the Filebrowser
Filebrowser:
Renamed "ADB Filebrowser" to "ADB Explorer". It can do so much more than just view the files on the device, so this name is more fitting. I should think of a new name for the entire application as well... "Quick ADB Pusher" isnt even half the truth anymore
Added cache feature! Everytime you enter a directory youve already been in, the cache kicks in rather than asking the device for the content. Each device has its own cache (note: a wifi-connected device will have its own cache based on the IP, so if you connect to the same device using cable or another IP, the cache needs to be rebuilt).
The cache will update as follows:
When entering a new directory not currently present in the cache.
When you hit the refresh button.
When you rename a file/folder.
When you create a new folder.
When you paste a file/folder from the clipboard.
When you delete a file/folder.
When you transfer a file/folder to the device.
The cache will NOT update when you send a file from the device to your PC
The cache will get deleted upon application exit.
You can now cancel the contentlisting and go back by hitting "../", Backspace shortcut-key or the Back button. Added because some directories takes ages to load on various devices, and its not so fun rolling your thumbs when all you want to do is go back to the previous dir
Added "drag-drop" to the filebrowser - you can now dragdrop files and folders directly to the browser to send it(or install, if .apk) to your device. The cache will refresh upon completion. You can also drop files and folders FROM the browser to your PC!*
* this might not sound so special, but it was a ***** to implement. Dragging stuff to the browser - ~50 lines of code. Dragging stuff FROM the browser - a little over 200 lines of code... C# sure has its limitations...
Added "Grab" to the right-click menu. This will send the selected file/folder from your device to your PC.
In short, the filebrowser can do what the main application can, so you dont have to close the browser to send/recieve a file/folder. A loading thingy will appear over the browser while a filetransfer is in progress.
Added "Properties" to the right-click menu. This shows some info such as the size of the file, and even the total size of a folder (incl. sub dirs). If you select a folder with a lot of content/folders, it might take a while to calculate the size. Other things it show is where its mounted and what permissions the file/folder has. NOTE: Requires Busybox, and root for files and folders only accessible by root (duh!)
Added 3 warnings upon opening the browser: One to inform you if your device isnt rooted, one to warn you busybox is missing and one to warn you if your device is rooted, but ADB was unable to acquire it. None of these warnings will show if adb acquires root and busybox is present.
Added a textarea showing the used space on the device, based on the mounted partition (such as /data, /sdcard, etc). So dont be scared if the number jumps around while youre browsing - it just means youve entered a different partition. Click to switch between used and free space. Requires Busybox
The browser now remembers your last location and will not start from "/" everytime you open it. Memory is lost upon main program exit and when you select a different device.
Added "View file" (prev. unfunctional "Open" menu item) to the right-click menu. This allows you to view smaller files (up to 10MB) without permanentally save them on your PC. I have blocked larger files because the time it takes to transfer those files isnt worth it for just "a quick look". My devices transfers a 10MB files between 2 and 5 seconds(depending on device) - which I think is ok, so I set the limit there.
Tweaked and tuned to make the browser act somewhat normal for devices without root/busybox. Devices without root/busybox will miss out on quite a lot though And before anyone asks - No, I do not plan on making this program able to root your devices. There are plenty of tools for that already.
Fixed the shortcutkeys that only worked when they wanted to. In addition, several more shortcuts have been added.
List of currently supported shortcuts:
ctrl+x: Cut file/folder
ctrl+c: Copy file/folder
ctrl+v: Paste file/folder
ctrl+s: Grab the selected file/folder
shift+delete: Delete the seleceted file/folder
shift+n: Create a new folder
F1: View file
F2: Rename file/folder
You can also use the arrowkeys to navigate, similar as in explorer. cut/copy/paste only works within the ADB Explorer.
Added Forward and Back buttons. Works the same way ordinary back/forward buttons do. Also changed icon for Refresh
Added a Toolbar, containing more buttons such as "view file", "download", "upload", "delete"...
Added 2 eastereggs , one is easy to find. The other is well hidden, and actually serves a purpose Well actually, the latter isnt really an easteregg, but it should be hard enough for you mortals to find
Known issues:
You friends might rage and throw their IPhones at you when they see this
------
HTC Sync REALLY doesnt like ADB, so close that crap before starting this app, or better yet - uninstall it!
It seems HTC Sync is trying to start its own adb server, and is very persistant in doing so.
This results in Quick ADB Pusher and HTC Sync having a fight for their life on who is going to start the server.
------
If you install an .apk, then try to send something else, the program will try to install that as well. This is because I was retarded and forgot to add one check.
Solution: Close the filebrowser, untick "install apk". Will be fixed in the next version, I promise! :angel:
Version History:
v0.4.1 - 6570 views on the attachement alone. Not bad...
Fixed filebrowser not working on some devices, I hope. Please test this for me as the browser has always worked fine for me on all my devices.
Changed apk install method to use AndroidLib's method. It now tells you if the installation was successful or not.
... Some minor things I cant remember.
Note, the "Open" option in the filebrowser is just a placeholder for now, its not a bug that it doesnt work, it isnt ment to work.
v0.4
Fixed bug where files and folders containing "_(" threw a syntax error.
Added file browser for device (see Seperate notes).
Added wireless ADB support.
Added Pull-file mode.
Re-designed the UI.
Moved the info-view to 3rd tab. Im moving away from it more and more.
A lot of the text and button-text will now change depending on your current choices. Ex. the Send-button now switches between Send, Pull and Install.
A truckload of code rewriting and optimizations.
Added an additional check for Root remounting, which should fix rare cases where remounting fails (If your device cant be remounted as root, please report it along with your device, rom etc)
Added "Install APK" You can now install APKs directly through the program.
Added reboot options in the Advanced tab
Added device info in the Advanced tab (The temp seems to be reported in C * 10, so I report it as C / 10, let me know if it doesnt look right for your device, and dont forget to tell me what device/rom you're using)
Filebrowser Features:
Browse and select files.
Context menu (right-click menu).
Copy or move(cut) files/folders within the device.
rename files/folders on the device.
delete files/folders on the device. Warning: Deleting the wrong files might brick your device! Double-check that you really want to delete the file before doing so!
create new folders on the device.
icons for certain formats (more to be added).
progressbar for directory loading progress.
'clipboard' icon to remind you what you currently have selected for copy/cut.
Notes:
The filebrowser is in its early stage. I have bugtested it as much as I can and it works flawless with my 3 devices.
The speed of listing directoiess/files greatly differs with device. My TF101 lists the contents about twice as fast as my ZTE Blade, theres not all that much I can do about it, as I dont have the time right now.
When pasting a file in a location where a file with the same name already exists, the program will currently simply overwrite the file. I havnt had time to add a check for it yet (ETA: Next version).
---To be added:
Direct interacting/editing of files, such as text files etc.
cache-feature, to reduce the frequency of grabbing the dir. contents from the device (which will help speed up changing paths).
A "file exists" check when pasting, allowing you to chose to overwrite or rename the old file.
v0.3
Fixed program freeze when no device was connected.
Added device selection, so it should work with multiple devices connected. please test this for me
Rewrote most of the program to make use of AndroidLib.dll
Removed the console(debug) tab, as it served little to no use now
Added an 'Advanced' tab for future use
Cleaned up a lot of garbage code
Fixed system not mounting as R/W
Other minor changes and fixes
v0.2
First public release
v0.1
very first version I wrote, which was buggy and often froze and god knows all...
Trust me, it was terrible. It worked and did what it set out to do but... It was terrible...
The latest Version has been tested and bugfixed on the following devices:
ZTE Blade with Swedish Spring 5, connected through USB Cable
ASUS Transformer TF101 with Team EOS Nightly build 28, connected through WIFI
HTC One S with stock 4.0.3, no root, no busybox. USB Cable
HTC One S with stock 4.0.4, root, no busybox. USB Cable
HTC One S with stock 4.0.4, root, busybox. USB Cable.
-------------------
Suggestions for improvements, feedback etc are more than welcome
Thanks to:
regaw_leinad - for writing the very handy AndroidLib found here
Dont forget to hit 'thanks' if you like my application. Every thanks I get brings a smile to my face
Download:
If the attachment doesnt work, try this mirror (select version and hit ctrl+s, or file -> download)
i think making a batch file was easier
Hey, cool app. There does however seem to be a problem with XDA's attachment feature, and it only downloads about 1k of the zip, then says complete. Also, if you plan on extending this a little more, check out my .NET Android Library named... well AndroidLib. It will help you out a bunch with the coding of the features you want to add.
regaw_leinad said:
Hey, cool app. There does however seem to be a problem with XDA's attachment feature, and it only downloads about 1k of the zip, then says complete. Also, if you plan on extending this a little more, check out my .NET Android Library named... well AndroidLib. It will help you out a bunch with the coding of the features you want to add.
Click to expand...
Click to collapse
Thanks for the heads up.
I placed it on google docs, hopefully it works better
Linky
If it doesnt, perhaps you could give me a tip as to where to upload it. I used to have my own server so never really used any other file-sharing method
regaw_leinad said:
Also, if you plan on extending this a little more, check out my .NET Android Library named... well AndroidLib. It will help you out a bunch with the coding of the features you want to add.
Click to expand...
Click to collapse
O nice, Ill definitely check that out Thanks.
Goatshocker said:
Thanks for the heads up.
I placed it on google docs, hopefully it works better
Linky
If it doesnt, perhaps you could give me a tip as to where to upload it. I used to have my own server so never really used any other file-sharing method
O nice, Ill definitely check that out Thanks.
Click to expand...
Click to collapse
Yup, the new link works great! Unfortunately, when I don't already have an adb server running and hit the 'Check ADB Status' button, the form freezes and the process needs to be killed to close the program. Works fine when adb.exe is already running though.
---------- Post added at 12:26 AM ---------- Previous post was at 12:17 AM ----------
Killing adb.exe while it's frozen fixes the issue I pointed out, probably means there is an error in your
Code:
Process
code
EDIT:
Stalls on process.WaitForExit() when debugging
regaw_leinad said:
Yup, the new link works great! Unfortunately, when I don't already have an adb server running and hit the 'Check ADB Status' button, the form freezes and the process needs to be killed to close the program. Works fine when adb.exe is already running though.
---------- Post added at 12:26 AM ---------- Previous post was at 12:17 AM ----------
Killing adb.exe while it's frozen fixes the issue I pointed out, probably means there is an error in your
Code:
Process
code
EDIT:
Stalls on process.WaitForExit() when debugging
Click to expand...
Click to collapse
Thanks for the report,it seems to happen when theres no device connected. Silly me have only even tried the app with a device connected hehe.
I'll try to fix it later today
Goatshocker said:
Thanks for the report,it seems to happen when theres no device connected. Silly me have only even tried the app with a device connected hehe.
I'll try to fix it later today
Click to expand...
Click to collapse
ah, you're calling
Code:
adb get-state
that gets the state of the device connected.
My .NET Android library handles everything adb wise, it even uses it's own adb binary, so the user doesn't have to have the sdk for it to work. let me know if you're going to reference it with your app, and I'll put your project in AndroidLib's post of "Projects using AndroidLib"
regaw_leinad said:
ah, you're calling
Code:
adb get-state
that gets the state of the device connected.
My .NET Android library handles everything adb wise, it even uses it's own adb binary, so the user doesn't have to have the sdk for it to work. let me know if you're going to reference it with your app, and I'll put your project in AndroidLib's post of "Projects using AndroidLib"
Click to expand...
Click to collapse
Yep, I assumed that would work since it works fine if you do it directly in cmd. But guess not adb start-server didnt work either...
I think I'll leave the bug for now and start looking into your lib instead.
Really nice app
Do you plan to develop a Linux version ?
Great idea, thanks =)
How does it achieve rw access, since device-dependent?
For example, on some devices, in ADB shell, you use
Code:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock0 /system
But, in some, you use mtdblock3 instead of mtdblock0.
Since there's no setting on which mtdblock to use, how does the program know which one is correct?
Theonewithideas said:
How does it achieve rw access, since device-dependent?
For example, on some devices, in ADB shell, you use
Code:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock0 /system
But, in some, you use mtdblock3 instead of mtdblock0.
Since there's no setting on which mtdblock to use, how does the program know which one is correct?
Click to expand...
Click to collapse
adb remount does all the job as you are ultimately using adb..
the command which you specified is used to mount on device shell which you enter by adb shell
madman_amit said:
adb remount does all the job as you are ultimately using adb..
the command which you specified is used to mount on device shell which you enter by adb shell
Click to expand...
Click to collapse
Oh, so that's what it does! lol
Thanks.
Actually, when trying it out, it says, after starting daemon "remount failed, action not permitted"
Nevermind, will check the program, it seems easier...
Looks cool! I shall give this a try later and see how it does with my HTC Rezound.
Thank you for your work!
Wow, responses
Thanks for the feedback guys.
Unfortunely Ive kinda killed my sync cable for my TF (tried to convert it to a usb host adapter^^), and currently dont have any other android device to play with.
So development has kinda stalled right now. Ive got rid of the freeze-when-no-device-connected, but developed another issue instead. Not anything major, but very annoying. The app freezes while it checks for a device >_>, its only for a few seconds, but annoying nevertheless.
As for linux version... Im afraid thats way above my coding skills, and I dont have a linux PC to test on anymore (I killed the laptop which was running linux when I tried to build a touchscreen on it. Yes! I break a lot of things)
Awesome, just what I needed!
Could you please add an option to connect the phone using network?, with the "adb connect" command, I can use a bat file before starting the app but because I have several devices connected to the network the phone´s ip change in time, and having it built in the app would be great
Awesome work, just tried it out now and it's pretty awesome.
I think an adb connect option would be awesome, for those who have adb wireless app on there phone then it'll be really easy to transfer files and it'll be pretty sweet.
Anyway keep up the good work
Hey, just an fyi,
Code:
adb remount
will NOT work if the device connected does not have the option ro.secure=0 in the default.prop of the ramdisk. You shouldn't assume it does, because not all "ROM" developers know how to change it. My library does check for this, but in case you don't want to use it, be sure you can mount the filesystem /system as rw that way, or using the mount binary on the phone directly.
regaw_leinad said:
Hey, just an fyi,
Code:
adb remount
will NOT work if the device connected does not have the option ro.secure=0 in the default.prop of the ramdisk. You shouldn't assume it does, because not all "ROM" developers know how to change it. My library does check for this, but in case you don't want to use it, be sure you can mount the filesystem /system as rw that way, or using the mount binary on the phone directly.
Click to expand...
Click to collapse
Hey thanks for the info. I had no idea about that, remount have always worked on all my devices on all roms Ive tried.
I'll keep that in mind when Ive fixed my sync cable
Could you give an example of a device/rom combo remount does not work on?
Goatshocker said:
Hey thanks for the info. I had no idea about that, remount have always worked on all my devices on all roms Ive tried.
I'll keep that in mind when Ive fixed my sync cable
Could you give an example of a device/rom combo remount does not work on?
Click to expand...
Click to collapse
I can't think of a specific example, but if the developer does compile a boot.img with ro.secure=1, adb remount will not work but lots of 'devs' these days just grab the boot.img from people who actually know what they're doing, so you should be ok, just in rare cases, this will not work.
The recently posted rooting method for the KFHD has been great for owners to get started on modifying the device to suit their own tastes. However, I've been a little concerned about everybody jumping in without a safety net in place. There are numerous ways that this device can get bricked. Not to put all of you into a panic, but just getting an eventual OTA update from Amazon might put some of these rooted KFHDs in jeopardy. With no custom recovery on the horizon, I think it's important to have some backup/restore plan to get these devices booting again.
Overview
This backup plan involves making raw data clones of all critical storage partitions required to boot the device. These backup archives can then be stored somewhere off the device. In case of some critical failure that prevents the device from booting normally, these archives can be used to get the device booting normally again. The restore procedure requires the use of fastboot to write the backup archives back to their proper partitions. The use of fastboot requires a working bootloader, so the device will need to boot to the bootloader's bootlogo at a minimum. If the device has a broken bootloader, this guide will not be helpful. There's currently no working procedure for repairing a broken bootloader on the 2nd generation Kindle Fire devices.
To be clear, this guide is not a backup/restore plan for your data. This is strictly for backing up the system software while in a bootable state and recovering it if some modification bricks the device. This procedure has been tested on a KFHD with system software version 7.1.1. Although I have not tested it, I'm nearly certain it will work just fine on version 7.1.5. If the KF2 has the same partition layout as the KFHD, there's no reason why it shouldn't work for that device as well. Check the post on KFHD partitions for details.
Warning: Everything below is inherently dangerous and can potentially brick your device if they are not executed properly. I have tested various aspects to the best of my ability, but you assume all responsibility for performing any of these steps.
Backup
Attached is a small shell script written to do the following…
Make a "kindlebackups" directory in /sdcard (if necessary) and make it user read/writeable.
Create gzipped backup archives of partitions 1 through 11. This includes all partitions except /cache and /data.
Make all archive files user read/writeable.
The entire backup (stock) takes up approximately 550 MB, so be sure to have at least that much available in /sdcard. Root privileges are required for the script to run properly. The best time to use this script is after step two of the published rooting procedure. That's after the second reboot of the process when the device boots up in emulation mode and allows root access for the first time. At this point, the system partition is completely stock and has not been exposed to any modifications. Even if you are past this point, the backups will still be useful for any bootable state that allows root privileges.
Download the script, unzip and place it into your current working directory where you still have access to adb, then run the following adb commands to copy the script to the Kindle Fire and prepare it to be executed...
Code:
adb push backup.sh /data/local/backup.sh
adb shell chmod 777 /data/local/backup.sh
If the device is in the process of being rooted and it has just finished rebooting for the second time...
Code:
adb shell /data/local/backup.sh
If the device has already been rooted and the su binary is available on the system...
Code:
adb shell su -c "/data/local/backup.sh"
The entire process should take approximately 5 minutes. Once the script has completed the backup, access the Kindle Fire's storage area from your computer, then copy the contents of the "kindlebackups" folder to it. The "kindlebackups" folder may be deleted after transferring to your computer.
Restore
To begin the restore procedure, the device must be put into fastboot mode. My factory cable did the job for me, so I have not explored the possibility of changing bootmodes. I developed this guide on a borrowed KFHD and I do not intend to risk the device more than necessary. Unless someone comes forward with a procedure to change bootmodes into and out of fastboot mode, I'm going to say that a factory cable is required for the time being. Besides, based on my experience with the original Kindle Fire, a broken system almost always means there is no way to change the bootmode through it. Since this procedure will very likely be used on a device that cannot boot completely or otherwise has a bad system, a factory cable will probably be the only way into fastboot mode. If you plan to root or modify your system software, invest in a factory cable.
Use the factory cable (with the device turned off, plug into the device, then the computer) to get to fastboot mode. If successful, a "fastboot" logo will take the place of the original "kindle fire" logo.
Decompress the gzipped archive to be flashed… Linux users have gunzip, Mac OS X users also have gunzip and a built-in GUI utility, and Windows users can use 7-zip. The archive must be decompressed before flashing. Skipping this step will brick your device.
Flash the image file(s) back to the device. In most cases, the device will just have to get a working system partition flashed back to it, but the others are available if they are needed. To flash the system partition...
Code:
fastboot -i 0x1949 flash system system.img
- Optionally erase the cache and/or userdata partitions if the contents of either interfere with the operation of the system software. The system will rebuild them on reboot…
Code:
fastboot -i 0x1949 erase cache
fastboot -i 0x1949 erase userdata
Once the process is complete, long-press the power button (~20 seconds) until it powers down, unplug the factory cable, and power the device back up.
Good luck.
Thanks kinfauns. I appreciate everything you did for the original kindle fire. This should help a lot of people.
Sent from my Kindle Fire
My kindles /system directory is already screwed. Do you have a system.img file I can use?
Sent from my Galaxy Nexus using xda app-developers app
When i boot my kindle fire hd to fastboot (by factory cable) and connect it to pc, pc can't recognize kindle, it don't have driver for it.
Could anybody post his clean backup here? Screwed my kindle, want go back to stock. Backup is only way.
Copying kindlebackup folder
Thanks for the script - the backup procedure was smooth -
I couldnt find the kindlebackups folder while browsing through my PC and for others like me who wonder how to take these out of your KFHD, here is a simple way - I used a program called Wondershare MObilego (Manage SDcard option under more tools) Backing up was a cakewalk.
I have no affiliation to this tool maker - Just sharing a way that helped a n00b like me. (First rooting experience)
Thanks for the efforts!
BTW, will a backup from a clean device work for other devices instead of the same one which the backup was created from? Just wondering if people who have already fiddled around their root devices can get a fresh start.
vuhai6 said:
When i boot my kindle fire hd to fastboot (by factory cable) and connect it to pc, pc can't recognize kindle, it don't have driver for it.
Click to expand...
Click to collapse
I don't know if anybody has packaged the device drivers set up for this device. If nothing else, you can get the device driver installer in the "Kindle Fire Utility" for the original KF and use that. You just have to change the PID from 0006 to 0007 before installing it and should work. Refer to this post if you still have problems...
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
for device driver information. Again, written for the original KF, but the process for installing device drivers is the same. Only the PID is slightly different and that should get edited in the INF before installation.
ceebu said:
Thanks for the script - the backup procedure was smooth -
I couldnt find the kindlebackups folder while browsing through my PC and for others like me who wonder how to take these out of your KFHD, here is a simple way - I used a program called Wondershare MObilego (Manage SDcard option under more tools) Backing up was a cakewalk.
I have no affiliation to this tool maker - Just sharing a way that helped a n00b like me. (First rooting experience)
Click to expand...
Click to collapse
Glad to hear it worked out for you. I am not familiar with that program, but the KFHD should connect automatically to a Windows device as external storage... does it not?
dreamcryer said:
Thanks for the efforts!
BTW, will a backup from a clean device work for other devices instead of the same one which the backup was created from? Just wondering if people who have already fiddled around their root devices can get a fresh start.
Click to expand...
Click to collapse
I have not tested this and don't have a way to do so. I have some concerns about it, but I'm sure someone desperate enough will jump in and try it out. I know it's too late for some, but my suggestion is for everybody to make a backup if you can and not rely on someone else to give you archives after the fact. It's better to have your own backups.
Not recognized
My kindle is also not recognized when plugged in
kinfauns said:
I don't know if anybody has packaged the device drivers set up for this device. If nothing else, you can get the device driver installer in the "Kindle Fire Utility" for the original KF and use that. You just have to change the PID from 0006 to 0007 before installing it and should work. Refer to this post if you still have problems...
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
Click to expand...
Click to collapse
But pc don't recognize as Kindle, it as Tate-PVT-08 (sorry, i use mac cho screenshot, but windows too)
vuhai6 said:
But pc don't recognize as Kindle, it as Tate-PVT-08 (sorry, i use mac cho screenshot, but windows too)
Click to expand...
Click to collapse
I know that the vendor id is correct.
Sent from my Kindle Fire
kinfauns said:
Glad to hear it worked out for you. I am not familiar with that program, but the KFHD should connect automatically to a Windows device as external storage... does it not?
Click to expand...
Click to collapse
I was only able to see the contents of /sdcard using windows...
Sent from my GT-I9100 using xda app-developers app
cesdev89 said:
My kindle is also not recognized when plugged in
Click to expand...
Click to collapse
Then you're first going to have problems getting root privileges. You need to get adb working before you attempt any part of rooting or backing up with this procedure.
vuhai6 said:
But pc don't recognize as Kindle, it as Tate-PVT-08 (sorry, i use mac cho screenshot, but windows too)
Click to expand...
Click to collapse
This is the correct "product" reported by the KFHD. This and the product ID (0007) are the only differences between the KFHD and the original when it comes to installing the device drivers on Windows.
ceebu said:
I was only able to see the contents of /sdcard using windows...
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
/data/media and /sdcard are essentially the same thing (see the second post in this thread for an explanation of why this is the case). You should have seen kindlebackups in that directory.
kinfauns said:
You should have seen kindlebackups in that directory.
Click to expand...
Click to collapse
For some reason I didn't see it there, on hindsight I guess I panicked a bit (n00b) and fell back to the solution I already had.. (been using mobilego to manage my sgs2)..
Sent from my GT-I9100 using xda premium
kinfauns said:
I don't know if anybody has packaged the device drivers set up for this device. If nothing else, you can get the device driver installer in the "Kindle Fire Utility" for the original KF and use that. You just have to change the PID from 0006 to 0007 before installing it and should work. Refer to this post if you still have problems...
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
for device driver information. Again, written for the original KF, but the process for installing device drivers is the same. Only the PID is slightly different and that should get edited in the INF before installation.
Glad to hear it worked out for you. I am not familiar with that program, but the KFHD should connect automatically to a Windows device as external storage... does it not?
I have not tested this and don't have a way to do so. I have some concerns about it, but I'm sure someone desperate enough will jump in and try it out. I know it's too late for some, but my suggestion is for everybody to make a backup if you can and not rely on someone else to give you archives after the fact. It's better to have your own backups.
Click to expand...
Click to collapse
I'm ready to try
Didn't show at first
Kindlebackups showed up in root browser right away, but didn't show on PC until I rebooted KF2. So now should
I decompress and put in folder containing ADB?
Yuretz said:
Could anybody post his clean backup here? Screwed my kindle, want go back to stock. Backup is only way.
Click to expand...
Click to collapse
I got the same situation, could anyone kindly help to provide a backup?
Same here ... just need the system image ... Please
I'd appreciate it if everybody would refrain from making this a "beg for a system image" thread.
strat6 said:
Kindlebackups showed up in root browser right away, but didn't show on PC until I rebooted KF2. So now should
I decompress and put in folder containing ADB?
Click to expand...
Click to collapse
You can put the the images wherever you want, but you'll need to specify the path to the file. For example, if you are using Windows and put the kindlebackups directory on C:, you just need to modify the command to...
Code:
fastboot -i 0x1949 flash system C:\kindlebackups\system.img
Thank you for posting how to do this. It opens a lot of doors with at least a little security.
I made a backup earlier without a problem, then went ahead and made myself a factory cable(easy to do and worked great- old asus usb cable, 1k resistor, soldering iron, shrink tape and voila!). I feel much better about doing any mods to this device now knowing I can just flash my backup.