Database Users

No! I bricked my phone!!

I just rooted my Mytouch a couple days ago and everything worked perfect and i did it without bricking my phone. I was trying to get the supercsdiv4 rom, but i needed to flash the lateset radio and heres where the problem started. the radio tried to flash was 2.22.23.02. I used the recovery image to flash it and then when i rebooted the phone it stayed stuck at the splash screen and i cant get into fastboot or recovery anymore. it just boot to the splash screen and stays there. I know i cant get my phone back but i want to know what i did wrong so that i dont ever do it again. maybe it was because the radio i had was a 32a radio and this radio i tried to flash might have been 32b but im not sure why that wouldn't work if my phone is 32b
here was my system
pvt 32b
Hboot 1.33.2005
radio 3.22.20.17

have you tried taking the battery out for a bit.. relax a while, then put it back in and try to get into recovery mode (home and power)

this actually happened yesterday and my phone was off the whole time so it has had plenty of time to rest. My phone is truly bricked

well im sorry to hear that, but i have no idea what you did wrong, unless you did flash a 32a over a 32b or the other way around, im sure that could really mess up the phone.
may be a useless idea but have you tried a hard reset
1. With the phone turned off, press and hold the HOME and BACK buttons.
2. Briefly press the END CALL/POWER button while continuing to press the HOME and BACK buttons.
3. When you see the screen with the 3 Android
images, release the HOME and BACK buttons, and then press the TRACKBALL.
i have no idea if it will do anything but might as well explore EVERYTHING.

Similar Problem (Partial Brick?)
Not to take anything away from clint1225 but
I have a similar problem and didn't want to start another thread.
I tried unrooting my devices using the method
described at theUnlockr.com. Everything was fine up until I tried using
their sappimg file (said it worked for all old magics).
At the hboot stage, it found the sappimg but the update failed.
However, the magic now says:
SPL-1.33.0006 (SAP50000)
Radio- 2.22.19.261
Ship S-On G.
It's a 32A version.
I had an engineering spl and 6.35xx radio before I attempted to unroot.
Oh I'm not able to access recovery but I can access
fastboot (computer can't find it though under "fastboot devices")
Other than that, it's stuck at the first splash screen.
Any advice/tips?
Sorry for the long post and thank you.
Good luck to you too, clint1225!

UPDATE *Similar Problem (Partial Brick?)*
In the adb, the serial number
of the htc magic is coming
up under "fastboot devices".
However, if I try to
flash a recovery for example, the adb
returns "remote access not allowed".
I've read about the gold card method
but my phone won't boot up properly
(stuck at splash screen) and I can't
access recovery. Only fastboot seems to be
working.
Any help is greatly appreciated.
Thanks!

Take it for what it's worth coming from a newb. But from my understanding if you can reach your phone with Fastboot your a NOT bricked. But this is what I have heard here on XDA, I haven't proven this myself.
Check around and hopefully with fastboot you can get your phone back. Good luck.

I did the exact same thing a few weeks back. I flashed a 3.22 radio over my 2.22 radio, thinking it's an upgrade but after it reboots, it wont get past the logo screen. I spent the whole day trying to find ways to recover it but cannot find any. Thank god I have warrenty on it so I went to the Tmobile store, told them I updated it and when it restart, it got stuck on the logo screen. They gave me a new phone and told me dont f-up this one. Now I'm afraid of updating my phone to the 6.something radio.

Update *Similar Problem (Partial Brick?)*...again.
MasterColdSoul and koolpre,
Thanks for the tips and luck!
I figured it wasn't a total brick so I searched
the whole day on google and xda.
What I can tell you is that I now have a functional phone.
I used the rogers "mandatory" update (2 sappimgs) to
get my phone (rogers 32a) working again (boots fully).
However, I now have the SPL 1.76.0010 which means
I've lost root functionality and it's harder to get root.
But I could use the phone to make a gold card and get root again.
Boy I'm glad this worked! I should have learned my lesson
but I will probably try to root, hehe!
Thanks to google search and xda community!

koolpre said:
I did the exact same thing a few weeks back. I flashed a 3.22 radio over my 2.22 radio, thinking it's an upgrade but after it reboots, it wont get past the logo screen. I spent the whole day trying to find ways to recover it but cannot find any. Thank god I have warrenty on it so I went to the Tmobile store, told them I updated it and when it restart, it got stuck on the logo screen. They gave me a new phone and told me dont f-up this one. Now I'm afraid of updating my phone to the 6.something radio.
Click to expand...
Click to collapse
just because the radio starts with bigger numbers doesn't make it an update. 3.22 was the old radio and 2.33.23.02 is the latest radio so you were actually downgrading your radio and thats why your phone brick. Just letting you know because you seem to be under the wrong impression. Dont make that mistake again. just do a little research to find the latest radio.

Q What should i do?

T-Mobile USA MyTouch 3G 1.2/Fender with 3.5 MM Jack
Sapphire PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009,22:33:27
Ok my problem is i stupidly deleted my girls default home launcher when i was gonna use the adwlauncher but the phone rebooted, now it wont load android at all. I've tried the sappimg.nbh and the sappimg.zip but neither will update correctly since my security is on. I cant flash a new rom either since i have no recovery either. Is there anyway i can change my spl to an engineer to get more hboot options unlocked or should i just report my phone stolen and pay the deductible for th new recovery phone, please help you guys i have tried and read tons of threads and have failed miserably lol

You need to reset the device from fastboot...
Look at the menu and you will find it.
You can also just flash your official RUU...
To turn on RUU mode type this:
Code:
fastboot oem rebootRUU
Then just start your ruu update.
Don't start doing all kind of stupid ****... try the above before you make your self a goldcard!

Alright man thanks for the help i'll report back when im done.

I reset the device then it just loads the rom im currently on ( htcclay's TCBY 1.3dsf 2.2 froyo) reboots then hangs on the splash screen. How do i flash or type in that code about the ruu?
Edit**
The phone can only accept calls coming in, but theres still no way of using the launcher it's completely blank cuz of my accident. Im guessing the reset doesnt reinstall the needed drivers or apks to factory setings.

To Get into fastboot power the phone off and the press back + power and hold them down until the fastboot screen comes on. Then try the fasboot commands from the post above in a Windows command prompt. Hope it work for you. If it does please report back, because I am desperately trying to unroot my phone and go back to stock so I can sell it when I upgrade. Thanks.

d12unk13astard said:
The phone can only accept calls coming in, but theres still no way of using the launcher it's completely blank cuz of my accident. Im guessing the reset doesnt reinstall the needed drivers or apks to factory setings.
Click to expand...
Click to collapse
If you got adb connection, then install the launcher using this command:
Code:
adb install -r xxxxxxx.apk
(where xxxxxxxxx.apk should be replaced by the name of the laucnher apk)

ADB confuses the hell outta me lol. ADB = SDK correct? I've tried using it and following direction to push/install from my main drive c/ but can never get it to work right. Guess im just screwed and will have to pay the deductible, i do appreciate the help tho you guys.

I followed the unlockers guide and made a goldcard and with that was able to get back to recovery woohoo, thanks fo rall the help, i just had to really really focus and actually try our adb lol. Mods can lock this now please.

[Q] Stuck At Unzipping Screen (Now It Won't Go Into Recovery Mode)

Hey everyone.
I was rooting my MyTouch 3g w/3.5mm this morning. I'm following the instructions from here ( http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/ ). I had apparently messed up when I was at the restart after flashing sappimg.zip onto the phone and was stuck at the HTC Magic Screen. I restarted my phone by holding down the Reject Call + Volume Down key and told it to flash sappimg.zip onto the phone again so I could redo it correctly. Unfortunately, it's stuck at the "[1] SYSTEM - UNZIPPING" stage. I'm afraid to turn it off because it says to not power off the device.
So, yeah, have I bricked my phone or is there a way to restart this process so I can successfully root?
Thanks much, and have a happy holiday.
EDIT: This sort of resolved itself, but now I can't get into recovery mode. :/

Rhaseo said:
Hey everyone.
I was rooting my MyTouch 3g w/3.5mm this morning. I'm following the instructions from here ( http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/ ). I had apparently messed up when I was at the restart after flashing sappimg.zip onto the phone and was stuck at the HTC Magic Screen. I restarted my phone by holding down the Reject Call + Volume Down key and told it to flash sappimg.zip onto the phone again so I could redo it correctly. Unfortunately, it's stuck at the "[1] SYSTEM - UNZIPPING" stage. I'm afraid to turn it off because it says to not power off the device.
So, yeah, have I bricked my phone or is there a way to restart this process so I can successfully root?
Thanks much, and have a happy holiday.
Click to expand...
Click to collapse
So your flashing the engineering spl for the first time or are you flashing the stock spl back?

Binary100100 said:
So your flashing the engineering spl for the first time or are you flashing the stock spl back?
Click to expand...
Click to collapse
I'm flashing the engineering spl onto there for the first time.
It appears that being stuck at the Magic screen is normal according to a different (but similar) guide from the Cyanogen Wiki. Would it irreparably damage my phone if I removed the battery despite it being at the "Unzipping" screen for Sappimg (as I was unzipping sappimg for a second time) and proceeding with CyanogenMod's guide instead?
EDIT: It appears my phone just turned off on it's own (battery probably died). I'm going to try CyanogenMod's instructions and see if that works.
EDIT 2: So, I reflashed it with the sappimg that Cyanogen has on his wiki. So everything was smooth sailing until I got to the Recovery step. I cannot, for the life of me, to get it to boot in recovery mode. I hold HOME+POWER but nothing pops up.
EDIT 3: And it appears as if I've bricked it.

Rhaseo said:
I'm flashing the engineering spl onto there for the first time.
It appears that being stuck at the Magic screen is normal according to a different (but similar) guide from the Cyanogen Wiki. Would it irreparably damage my phone if I removed the battery despite it being at the "Unzipping" screen for Sappimg (as I was unzipping sappimg for a second time) and proceeding with CyanogenMod's guide instead?
EDIT: It appears my phone just turned off on it's own (battery probably died). I'm going to try CyanogenMod's instructions and see if that works.
EDIT 2: So, I reflashed it with the sappimg that Cyanogen has on his wiki. So everything was smooth sailing until I got to the Recovery step. I cannot, for the life of me, to get it to boot in recovery mode. I hold HOME+POWER but nothing pops up.
EDIT 3: And it appears as if I've bricked it.
Click to expand...
Click to collapse
Will the rom start? If so, you didn't brick it.
Do you have the Engineering SPL on it? What SPL version do you currently have on there? Remember that if you have the T-Mobile US MyTouch w/3.5mm jack then you MUST have 32B recovery and radio and STOCK (1.33.0013) SPL before flashing a custom rom.
Best way to do it is to flash your custom recovery (I suggest Clockwork Recovery for Mytouch/ION devices) by fastboot.
Afterwards then flash your stock (S-ON) SPL back and then boot to recovery to flash your rom.
REMEMBER!!! YOU DO NOT HAVE A 32a DEVICE! DESPITE WHAT THE SPL SAYS... IT'S NOT TECHNICALLY A 32a DEVICE!!! You MUST treat is as a 32b.

Binary100100 said:
Will the rom start? If so, you didn't brick it.
Do you have the Engineering SPL on it? What SPL version do you currently have on there? Remember that if you have the T-Mobile US MyTouch w/3.5mm jack then you MUST have 32B recovery and radio and STOCK (1.33.0013) SPL before flashing a custom rom.
Best way to do it is to flash your custom recovery (I suggest Clockwork Recovery for Mytouch/ION devices) by fastboot.
Afterwards then flash your stock (S-ON) SPL back and then boot to recovery to flash your rom.
REMEMBER!!! YOU DO NOT HAVE A 32a DEVICE! DESPITE WHAT THE SPL SAYS... IT'S NOT TECHNICALLY A 32a DEVICE!!! You MUST treat is as a 32b.
Click to expand...
Click to collapse
Oh, wow. That explains why I bricked the phone. The Amon_RA Recovery I put on there was 32a... I'm an idiot.
The phone won't start up at all. :/ Looks like I'm out $100 or so.
Thanks for that, though. I was going to give you a "Thanks" but it appears the button has disappeared for me.

Rhaseo said:
Oh, wow. That explains why I bricked the phone. The Amon_RA Recovery I put on there was 32a... I'm an idiot.
The phone won't start up at all. :/ Looks like I'm out $100 or so.
Thanks for that, though. I was going to give you a "Thanks" but it appears the button has disappeared for me.
Click to expand...
Click to collapse
Can you still get into fastboot?

Binary100100 said:
Can you still get into fastboot?
Click to expand...
Click to collapse
Nope. It won't turn on at all.

Rhaseo said:
Nope. It won't turn on at all.
Click to expand...
Click to collapse
Won't boot, no recovery, no fastboot.
If it looks like a brick, if it sounds like a brick then it's probably...

I have a similar problem. I purchased this phone and it just almost works. It boots into fastboot just fine but not recovery. Here are the specifics as they stand now.
Sapphire unknown 32A ship S-on H
CLD 13
Radio 3.22.20.17
May 8 2009, 21:02:32
I made a good gold card...tried the 2010 spl...still hangs during unzip step of the flash process. Any other ROM and I get a main version older error.
Fastboot info version main 2.53.707.2
cid T-MOB010
Any help would be greatly appreciated.

Nice job on probably bricking your phone. You've got the myTouch 1.2 which means you just flashed an incompatible radio. Congratulations!!! I honestly not sure what to tell you. Which sappimg are you trying to use to get the engineering SPL?

Like i said...it was like this when I bought it.
I'm going to try to do a poorman's JTAG...wish me luck.

jonk26.2 said:
wish me luck.
Click to expand...
Click to collapse
Good luck! You can do it!
If you have any questions along the way, please don't hesitate to ask.
JTAG did in fact de-brick my MT3G 1.2 (bought from ebay) the first time I tried it. I made the mistake of flashing the stock ROM, so I would get to the "touch the android to begin" screen and couldn't get any further without a data plan. It wasn't until I probably flashed the wrong sappimg in a root attempt that I started experiencing the stuck at unzipping/FAIL-PU/remote signature verify fail problem...
FYI, I tried flashing radio 2.22.28.25 (the one from the OTA) using JTAG and the radata command, and it fixed my USB. I haven't experiemented much beyond that, but I'm planning to try some more things this weekend.
Moderators, I'd like to suggest merging this thread with http://forum.xda-developers.com/showthread.php?t=773368 and http://forum.xda-developers.com/showthread.php?t=771622 since they all seem to be discussing the same problem.

[Q] How to get into fastboot after radio flash?

Hi, unfortunately I will have to ask for help as I can't find a solution myself.
Until today i ran CyanogenMod 6.1 on my Vodafone HTC Magic and wanted to flash GingerYoshi on it.
Therefore I followed this guide to install a new radio and hboot which seemed to be necessary for the GingerYoshi Rom. According to the guide I used the RA-Recovery 1.7 to flash the SuperWipe_v2.zip, rebooted into RA-Recovery again, flashed the radio.zip, rebooted ... into nothing but the vodafone Logo on red background. At the first boot it showed a little box with an arrow pointing to an Android-Robot and then it stuck at the vodafone screen.
I can't get into fastboot (Back + Power) or any other mode (Volume Down + Power) it only boots to the red vodafone screen. The only action I can provoke is a black screen and a blue led when pressing the trackball during power up.
Any ideas what to do now? Did I really screw my telephone?
Original Rominfo:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0004 (SAPP10000)
CPLD-10
RADIO-2.22.19.26I
Apr 9 2009,23:30:40

Yes you did... the reason is simple.
When you flash a radio using the custom recovery, you have to wait like 2 min for it finish. It's normal that it will reboot a couple of times while it's flashing, and it's also normal to see a different picture for a while....
You ( this what I believe) just did not wait long enough for it to finish and tried to push a button or take out the battery...
So, yes, you are bricked!

Thats a shame...but when flashing radio and spl, we have to double our attention.

it happens bro, try pull out the batery and wait till tomorrow, and try again, if it doesnt work, it seem you have briked

Thank you for your answers - even though they aren't very encouraging
But mumilover might be right, although I waited quite some time before I started to panic, I obviously acted to early an interrupted the flashing process.
Does anyone know a German shop which can unbrick the device? Otherwise I will have to buy a new phone. In the meantime I will stick to my good old Siemens S45

[Q] HTC Magic stucked/spoiled /bricked!! :@

Hi all, I bought a 2nd hand HTC Magic with Mytouch 3g rom. It's the old model (without 3.5mm headphone jack) and its made in Taiwan.
Been using well for 3 months until what happened I tried doing system update from 1.5 to 1.6. Success!! Then I tried doing 1.6 to 2.1 update.
Halfway while updating it, the phone blacked out ( guess I didnt have more than at least 50 % battery power)
And from that point onwards, whenever and everytime I switched on my handphone it boots up and stucked at the Mytouch 3G green screen.
I cant get access into my handphone like how I normally do. All I can ever go far is just the stucked Mytouch 3g screen.
I've read alot from lots and other Android users and tried to do it myself.
1) Tried unrooting it by downloading the sappimg.nbh file, copy into a newly bought 2GB micro SD, pressing (VOL DOWN+POWER) and let the phone do its job.
Manage to get to the parsing, updating and checking signature part but it just say 'Model ID incorrect! Update Fail!'
2) Next I read is about doing GOLDCARD METHOD. I did as instructions and follow it step-by-step and carefully.
3) I can and able to download all needed files like 1.33.2005 HBoot, Amon Ra's Recovery Image, SappiMG.zip and all others.
BUT the only problem is that I cant get it in sync with the comp.
4) I cant get access at all into my phone to go to Settings > Applcations > Make sure Unknown Sources is checked on as required to.
5) I cant get access into my phone at all to go to Market and download the required File Manager App.
6) I tried installing all kinds of files for update.zip by pressing (HOME+POWER) still to no avail.
Tried all kinds of HBOOT, FASTBOOT still cannot.
7) The only thing I'm able to do is just (VOL DOWN+POWER) , (BACK+POWER) , (HOME+POWER) , (TRACKBALL+POWER) which emits the blue LED light, i don't know the reason. But still, nothing can be done.
And by pressing (BACK+POWER) this is what my phone's motherboard or whatever they call it.
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP10000)
CPLD-12
RADIO-2.22.28.25
Oct 21 2009,22:33:27
So what should I do now? Is this what they called it a bricked phone? I tried everything and really at lost. Is there someone out there who's able to help me with this? Been like this the past 4months. And Im really a noob with Android Gadgets as Im new to it. Do pardon my ignorance.
Thanks! really need your help. I'll do my best as long there's other alternative methods unless like I've stated the methods that I'm unable to do.