Anybody know what the default shell "/system/bin/sh" is? is it csh,ksh,ash.... I'm trying to write some scripts to execute with /system/bin/sh and need to know the syntax.
Thanks
#!/system/bin/sh
if -e /data/special; then
<do something>
fi
complains about -e not found.
if ( -e /data/special ) then # complains about the same thing
my impression is it is bourne shell.. just like /bin/sh from other *nix.
Related
Ok I been using Deodexer_2.5.6.2 It was built for the Samsung Vibrant. It builds flawless with a signed rom, but installs with errors. I see the some mount points that need to be changed, but not sure what else. Any developer that could help with this script would be great.
Have you tried [TOOL][PORT] Autodeodexer 2.3a for the Epic 4G Froyo - Windows in the dev section as an alternative?
Koadic said:
Have you tried [TOOL][PORT] Autodeodexer 2.3a for the Epic 4G Froyo - Windows in the dev section as an alternative?
Click to expand...
Click to collapse
Yes I have, but it does not build the entire rom for me as I would like. This script is a one stop shop. However is wants to install the device mount points for the other phone(Samsung Vibrant). I have been editing the bat but seems I am missing something some where of than the bat file. Like the other Galaxy S Phones they tend to use /dev/block/bml12 of the SDCARD while EPIC uses /dev/block/dm-12. So if you use either EC05 or EB13 you know the apps that move to the sdcard use this device mount point if you have alot of apps pushed to your sdcard. However I seem to be missing something else. Need help re-writing this.
ISSUE 1 deoall.bat
%adb% -d shell su -c "mount -o rw,remount /dev/block/stl9 /system && dd if=/dev/block/bml12 of=/sdcard/modem.bin bs=4096 && dd if=/dev/block/bml7 of=/sdcard/zImage bs=4096 && chmod 444 /system/etc/dbus.conf && chmod 444 /system/etc/bluetooth/* && chmod 775 /data/app" | FINDSTR /R "su..not.found Permission.denied" >>%errorlog%
ISSUE 2 deoall.bat
%adb% -d shell sh -c "mount -o rw,remount /dev/block/stl9 /system && chmod 444 /system/etc/dbus.conf && chmod 444 /system/etc/bluetooth/*" >>%errorlog%
::
IF NOT EXIST "%~dp0modem.bin" (
ECHO Downloading modem.bin
ECHO %time% Downloading modem.bin >>%errorlog%
IF NOT EXIST "%~dp0ROM/updates" MD "%~dp0ROM/updates"
%adb% -d shell dd if=/dev/block/bml12 of=/sdcard/modem.bin bs=4096 >nul
%adb% -d pull /sdcard/modem.bin "%~dp0ROM/updates/modem.bin" >nul
%adb% -d shell rm /sdcard/modem.bin >nul
)
::
IF NOT EXIST "%~dp0zImage" (
ECHO Downloading kernel
ECHO %time% Downloading kernel >>%errorlog%
IF NOT EXIST "%~dp0ROM/updates" MD "%~dp0ROM/updates"
%adb% -d shell dd if=/dev/block/bml7 of=/sdcard/zImage bs=4096 >nul
%adb% -d pull /sdcard/zImage "%~dp0ROM/updates/zImage" >nul
%adb% -d shell rm /sdcard/zImage >nul
)
ISSUE 3 update-script
run_program /tmp/updates/redbend_ua restore /tmp/updates/modem.bin /dev/block/bml12
print "Installing kernel..."
run_program /tmp/updates/redbend_ua restore /tmp/updates/zImage /dev/block/bml7
ISSUE 4 redbend_ua
Look in the redbend_ua but it has alot of binary and some script in it. Not sure that this file plays any editing importance since I compared it to the one-click-root_2.5.5 redbend_ua. Seems they are both the same. Looks like a command used for restoring the modem and zImage.
I started using Arch some months ago and I really enjoying it. Coming from a released based distro, it feels really nice been able to choose exactly what you want to run in your system and always have the packages up to date. For a while I have been planning on running ubuntu in my transformer but I just don't feel too comfortable with ubuntu , so decided to run arch in my transformer. I couldn't find a tutorial so I scavenged the net and found bits and peace that I put together to make this tutorial. What I like about arch is that I am in control of my system and I can run exactly what I want, thanks awesomely documented Arch!
This is a tutorial that will show you how to run Arch Linux in a chrooted environment within your Asus Tarsnformer. I will not provide a simple script that if you run it will do everything for you, instead I will teach you how to make your own installation by grabbing all necessary elements.
You will need:
Arch Live image: Go to http://archlinuxarm.org/developers/downloads and grab the omap 3/4 package.
Install environment: It can be your internal storage or a sd/micro card. Here I will show how to use the micro sd card.
Script for starting the chroot: I grabbed mine from http://forum.xda-developers.com/showthread.php?t=1517993&highlight=chroot and did some modifications. Thanks-miska-
Rooted Asus Transformer(Prime?) with Terminal: You need root to mount the file system and loop devices. In theory this should work in the Prime too.
Linux Machine
Step 1:
For installing arch in a (micro)sd card (I prefer micro as I don't need the dock for using it), first you need to format the card and make two partitions. (I used gparted) Make one partition fat and assign a small amount of space(I have a 4gb micro and assigned 128mb to the fat partition), then make the rest ext4. Make sure the fat partition is first and the ext one is second.
Step 2:
Now as root you need to extract the package in the ext partition of your card. REMEMBER to be root, I got stuck thinking there was something wrong with the package I downloaded but it was that I was unpacking as normal user.
Code:
# tar -c /path/to/extpartition -xzf ArchLinuxARM-omap-smp-latest.tar.gz
Now you have a arch environment in your (micro)sd card.
Step 3:
In your asus transformer create a folder called 'arch' in the root of your internal storage.
Code:
#mkdir /sdcard/arch
Or use a file manager.
Now place this script somewhere in your transformer, I usually keep it in /sdcard/Downloads
Code:
#!/bin/sh
# Modify this according to your needs
DEVICE="/dev/block/mmcblk1p2"
LOOP="no"
# Maybe this as well
MNT_PATH="/mnt/sdcard/arch"
# Modify only if you know, what are you doing
BINDS="dev dev/pts proc sys mnt/sdcard"
ANDROID_BINDS=" /system /data "
TMPS="tmp var/tmp var/log var/run"
MY_MOUNTS=""
unset PS1
# Helper functions
die() {
echo " $1"
exit 1
}
safe_mount() {
mkdir -p "$MNT_PATH""$2"
if [ "$3" ]; then
OPTION=" $3 "
else
OPTION=""
fi
if [ -z "`mount | grep " $MNT_PATH$2 "`" ]; then
mount $OPTION "$1" "$MNT_PATH$2" || die "Can't mount $2!!!"
fi
MY_MOUNTS="$MNT_PATH$2 $MY_MOUNTS"
}
# Real work
[ "`whoami || echo root`" = "root" ] || die "You must be root first!"
LOOP_ARG=""
[ "$LOOP" = "no" ] || LOOP_ARG=" -o loop "
safe_mount $DEVICE "" "$LOOP_ARG -t ext4 "
for i in $BINDS; do
safe_mount "/$i" "/$i" " -o bind "
done
if [ -d /Removable ]; then
for i in /Removable/*; do
[ -d "$i" ] && safe_mount $i /mnt$i " -o bind "
done
fi
for i in $ANDROID_BINDS; do
safe_mount $i /mnt/android$i " -o bind "
done
for i in $TMPS; do
safe_mount none /$i " -t tmpfs "
done
mount -o remount,ro "$MNT_PATH"
chroot "$MNT_PATH" /sbin/fsck.ext2 -y "$DEVICE"
mount -o remount,rw "$MNT_PATH"
# Tweak configuration of the chroot during first start
#if [ \! -f "$MNT_PATH"/etc/profile.d/tweak.sh ]; then
#mkdir -p "$MNT_PATH"/home/opensuse
echo 'nameserver 8.8.8.8' > "$MNT_PATH"/etc/resolv.conf
#echo 'net:x:3003:root,opensuse' >> "$MNT_PATH"/etc/group
#echo 'opensuse:x:1000:100::/home/opensuse:/bin/bash' >> "$MNT_PATH"/etc/passwd
#echo 'opensuse:$1$joWqOQdr$YsapocP32UtdiR3PKBXVM1:15395:0:::::' \
# >> "$MNT_PATH"/etc/shadow
#sed -i 's|^root:.*|root:$1$joWqOQdr$YsapocP32UtdiR3PKBXVM1:15395:0:::::|' \
# "$MNT_PATH"/etc/shadow
#echo '#!/bin/sh
#export TERM=linux
#export LANG="en_US.utf-8"
#export EDITOR="busybox vi"
#alias vi="busybox vi"
#precmd() { :; }
#if [ "`whoami`" = root ]; then
# export HOME=/root
# export USER=root
# hostname -F /etc/HOSTNAME
#fi
#if [ -z "$CHROOTED" ]; then
# export CHROOTED=yes
# export HOME="/home/opensuse"
# export USER="opensuse"
# su opensuse
#fi
#' > "$MNT_PATH"/etc/profile.d/tweak.sh
#fi
export PATH="/bin:/sbin:/usr/bin:/usr/sbin:/system/xbin:/system/bin"
# Chroot
chroot "$MNT_PATH" /bin/bash
#chroot "$MNT_PATH" /root/init.sh
# Cleanup
echo "Umount everything"
for i in $MY_MOUNTS; do
umount -l $i
done
Step 4:
Chmod +x the script and run it as root.
Code:
su
#chmod +x scriptname.sh
sh scriptname.sh
The script will mount the ext partition of your (micro)sd card in /sdcard/arch and will chroot into it. It also does other really nice things, such as mounting your android partitions to /mnt so you can access them from within your arch environment. I have disabled some lines that are used to set up a some environment variables, but you should still be able to get a fully functional command-line environment and you can enable them and modify them as you want.
Step 5:
The rest is completely up to you, now you have arch running in your transformer. But what!? You need X?! really???? Ok, so lets create a vnc server so we can remote into it.
Your network connection should work, so the first thing to do is an update
Code:
#pacman -Syu
Now install xorg
Code:
#pacman -S xorg-server xorg-xinit xorg-twm xorg-xclock xterm
Now install a vncserver
Code:
#pacman -S tightvnc
And now this is the tricky part(And I spent a lot of time in this).
I grabbed this script from the UbuntuInstaller post. This is the script they use for setting a resolution at each boot. What I did was to remove the resolution prompt and fix the resolution to 1280x752(fullscreen) and remove some ubuntu stuff. I also added an export for HOME and USER that will allow you to run 'vncserver' as root.
Code:
#!/bin/bash
#############################################
# Asks User to screen size and saves as REZ #
#############################################
#echo "Now enter the screen size you want in pixels (e.g. 800x480), followed by [ENTER]:"
#read REZ
###########################################
# Tidy up previous LXDE and DBUS sessions #
###########################################
#rm /tmp/.X* > /dev/null 2>&1
#rm /tmp/.X11-unix/X* > /dev/null 2>&1
#rm /root/.vnc/localhost* > /dev/null 2>&1
#rm /var/run/dbus/pid > /dev/null 2>&1
############################################################
# enable workaround for upstart dependent installs #
# in chroot'd environment. this allows certain packages #
# that use upstart start/stop to not fail on install. #
# this means they will have to be launched manually though #
############################################################
#dpkg-divert --local --rename --add /sbin/initctl > /dev/null 2>&1
#ln -s /bin/true /sbin/initctl > /dev/null 2>&1
###############################################
# start vnc server with given resolution and #
# DBUS server, (and optionally an SSH server) #
###############################################
export HOME="/root/"
export USER="root"
vncserver :0 -geometry 1280x752
dbus-daemon --system --fork > /dev/null 2>&1
/etc/rc.d/sshd start
#echo
#echo "If you see the message 'New 'X' Desktop is localhost:0' then you are ready to VNC into your ubuntu OS.."
#echo
#echo "If VNC'ing from a different machine on the same network as the android device use the 1st address below:"
##########################################
# Output IP address of android device #
##########################################
ifconfig | grep "inet addr"
#echo
#echo "If using androidVNC, change the 'Color Format' setting to 24-bit colour, and once you've VNC'd in, change the 'input mode' to touchpad (in settings)"
#echo
#echo "To shut down the VNC server and exit the ubuntu environment, just enter 'exit' at this terminal - and WAIT for all shutdown routines to finish!"
#echo
###############################################################
# Spawn and interactive shell - this effectively halts script #
# execution until the spawning shell is exited (i.e. you want #
# to shut down vncserver and exit the ubuntu environment) #
###############################################################
/bin/bash -i
#########################################
# Disable upstart workaround and #
# kill VNC server (and optionally SSH) #
# Rename used xstartup to its first file#
#########################################
vncserver -kill :0
/etc/rc.d/sshd stop
Place this script in /root/, give it the name 'init.sh' and make sure it is executable(chmod +x). Now in the previous script comment the line:
Code:
chroot "$MNT_PATH" /bin/bash
and uncomment the line
Code:
chroot "$MNT_PATH" /root/init.sh
Step 6:
Now you should be able to start a vncserver with twm as your window manager and a xterm.
You can now go to
https://wiki.archlinux.org/index.php/Desktop_Environment
or
https://wiki.archlinux.org/index.php/Window_Manager
and set up the desktop environment that you like the most.
Remember that you need to set up the graphical environment to start manually and not at boot. In a normal environment you would usually use 'startx' which will read the .xinitrc file and run the programs from there. In our case put everything that needs to go into .xinitrc into ~/.vnc/xstartup. An example of my ~/.vnc/xstartup
Code:
#!/bin/bash
xrdb $HOME/.Xresources
exec startfluxblox
This will start an empty fluxbox window manager.
As tizen source is available now I wondered if anyone has taken a look at it yet.
I prepared my machine to start building it and test it.
Will publish updates in this thread.
Sent from my GT-I9300 using xda premium
Another mobile OS. Like there isnt enough already.
Subscribe
Tapatalk 2-vel küldve az én GT-I9300-ről
As far as I have read the new phone with Tizen which Samsung will release (i9500) uses the i9300 modem.
Looking at the structure, used kernel etc now.
For building a kickstart file is used, it is looking like this:
Code:
# -*-mic2-options-*- -f loop [email protected]@-rs.tar.gz -*-mic2-options-*-
#
# Do not Edit! Generated by:
# kickstarter.py
#
lang en_US.UTF-8
keyboard us
timezone --utc America/Los_Angeles
# ROOT fs partition
#part / --size=800 --ondisk mmcblk0p --fstype=ext4 --label=platform
# Use larger partition for creation, and will be shrinked at last, workaround of libzypp bug
#part / --size=2000 --ondisk mmcblk0p --fstype=ext4 --label=platform
# DATA partition
#part /opt/ --size=1800 --ondisk mmcblk0p --fstype=ext4 --label=data
# ROOT fs partition
part / --size=1700 --ondisk mmcblk0p --fstype=ext4 --label=platform
# DATA partition
part /opt/ --size=3000 --ondisk mmcblk0p --fstype=ext4 --label=data
# UMS partition
part /opt/media/ --size=300 --ondisk mmcblk0p --fstype=vfat --label=ums
rootpw tizen
bootloader --timeout=0 --append="rootdelay=5"
desktop --autologinuser=root
user --name root --groups audio,video --password ''
repo --name=Tizen-main --baseurl=https://download.tizen.org/snapshots/trunk/common/@[email protected]/repos/main/armv7l/packages/ --save --ssl_verify=no
repo --name=Tizen-base --baseurl=https://download.tizen.org/snapshots/trunk/common/@[email protected]/repos/base/armv7l/packages/ --save --ssl_verify=no
%packages
@tizen-c210
@tizen-bootstrap
-glib2-static
-gettext-tools
-eglibc-utils
-imake
-giflib-utils
-brcm-gps-daemon
-insserv
%end
%prepackages
libgcc
eglibc
sqlite
zlib
libpython
libdlog
libcap
libattr
default-files-slp
busybox
python-base
libacl
glib2
tzdata-slp
vconf
libxml2
heynoti
openssl
shared-mime-info
libudev
security-server
dbus-libs
cert-svc
libsecurity-server-client
%end
%post
echo 'kickstart post script start'
if [ -d /etc/init.d ]; then
cp /etc/init.d/* /etc/rc.d/init.d/ -rdf
fi
rm -rf /etc/init.d*
ln -sf /etc/rc.d/init.d /etc/init.d
# Without this line the rpm don't get the architecture right.
echo -n 'armv7l-meego-linux' > /etc/rpm/platform
ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N ""
ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N ""
ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N ""
ail_initdb
/opt/apps/com.samsung.menu-screen/bin/menuscreen_initdb
cat > /usr/bin/press << EOF
#!/bin/sh
JUNK="SLP"
[ "\$1" ] && TIMEOUT="\$1" || TIMEOUT="1"
echo "Press return key to stop scripts"
read -t \$TIMEOUT JUNK
exit \$?
EOF
chmod +x /usr/bin/press
ln -s /opt/etc/X11/xkb /usr/share/X11
echo "UDEV_PERSISTENT_STORAGE=no" >> /etc/sysconfig/udev
rm -rf /usr/include
rm -rf /usr/share/man
rm -rf /usr/share/doc
MAJOR="2"
MINOR="0"
cat >/etc/info.ini <<EOF
[Version]
Major=$MAJOR;
Minor=$MINOR;
Build=TIZEN_`date +%Y%m%d`_1;
Order=;
[Build]
Date=`date +%Y.%m.%d`;
Time=`date +%H:%M:%S`;
EOF
ln -sf /etc/info.ini /opt/etc/info.ini
ln -sf /etc/info.ini /usr/etc/info.ini
mkdir -p /home/app
cp -a /etc/skel/.e /home/app/
chown -R 5000:5000 /home/app
chmod 0755 /home/app
chown -R 5000:5000 /opt/home/app
chmod 0755 /opt/home/app
cat > /usr/lib/systemd/system/usb-debug.service << EOF
[Unit]
Description=Start usb networking for debugging
ConditionPathExists=/sys/devices/platform/usb_mode/UsbMenuSel
[Service]
Type=oneshot
RemainAfterExit=yes
Environment=PATH=/bin:/sbin
ExecStart=/bin/bash -c 'echo 4 > /sys/devices/platform/usb_mode/UsbMenuSel'
ExecStart=/sbin/ifconfig usb0 192.168.129.3 netmask 255.255.255.0
ExecStop=/bin/bash -c 'echo 0 > /sys/devices/platform/usb_mode/UsbMenuSel'
#
# We now don't launch this USB mode hack by default. If you need that, run this:
# systemctl enable usb-debug.service
# or create a link manually like below:
# ln -s ../usb-debug.service /usr/lib/systemd/system/basic.target.wants/usb-debug.service
#
[Install]
WantedBy=basic.target
EOF
# required for the connman systemd service
cat > /etc/sysconfig/connman << EOF
OPTIONS="-W wext"
EOF
# required for the wpa_supplicant systemd service
cat > /etc/sysconfig/wpa_supplicant << EOF
OPTIONS="-Dwext"
EOF
ldconfig
rpm --rebuilddb
echo 'kickstart post script end'
%end
%post --nochroot
%end
News ?
It is nice Android to have competition but from what I saw on youtube Tizen is just android stuck at version 2.3. Is there anything new except that there will be no native apps?
gud to here that
now wating for ur good work
I am trying to get CIFS working on my tablet per the instructions on this thread: http://forum.xda-developers.com/showthread.php?t=2003836
I have busybox installed and have created the script below, but whenever I run the script in terminal emulator or Script Manager I get:
not founds/bin/mountscript.sh[2]:
not founds/bin/mountscript.sh[9]:
etc...
I have also tried the busybox ash to no avail.
It seems like variables are not being set. What would cause this?
Code:
#!/system/bin/sh
# Your settings here
USERNAME="user"
PASSWORD="password"
IPADDRESS="10.0.0.84"
SHARE="DriveJ"
MOUNT_POINT="/sdcard/cifs/Drive"
# If you need to change the mount command edit this
MOUNT_CMD="\
mount -t cifs \
\
-o \
user=$USERNAME,\
password=$PASSWORD,\
unc=\\\\\\\\\\\\\\\\$IPADDRESS\\\\\\\\$SHARE \
\
//$IPADDRESS/$SHARE \
$MOUNT_POINT"
COMMANDS="\
insmod /sdcard/mods/md4.ko; \
insmod /sdcard/mods/nls_utf8.ko; \
insmod /sdcard/mods/cifs.ko; \
$MOUNT_CMD
"
# Starting ADB...
PORT=`getprop service.adb.tcp.port`
setprop service.adb.tcp.port 5555
stop adbd
start adbd
adb connect localhost
echo adm connected
# Make sure we only use the first device (sometimes there is more than one)
echo serial being set
SERIAL=`adb devices | head -n2 | tail -n1 | cut -f1`
echo SERIAL=$SERIAL
if [ "$SERIAL" = "" ]; then
echo "ERROR: Could not find ADB device.";
fi
echo Mounting share via adb...
adb -s $SERIAL shell su -c "$COMMANDS"
# If you started adb, then stop it here for security:
adb disconnect localhost
stop adbd
setprop service.adb.tcp.port $PORT
start adbd
RESULT=`mount | grep $MOUNT_POINT`
if [ "$RESULT" = "" ]; then
echo "Mounting failed..."
else
echo "Mounting sucess!"
fi
echo Done... You may close this script window.
With Android 4.2's multi-user stuff and the dreaded "0" folder, Google broke mounting of CIFS shares for good. (They basically implemented something utterly useless for my needs, and broke something I need on a daily basis.) Cyanogenmod fixed that for mounts outside the /storage hierarchy, but many apps can't go there. And with 4.2.2, Google made using adb on the device very annoying as well, which adds to problems for a workaround for mounting shares in a useful place.
So I looked around for various fixes for that issue and compiled those into one method that works perfectly well for me on a P6810 running the current PAC ROM 20130629. It should probably work for any other CM10.1 or PA3.6x-based ROM as well. A nls_utf8.ko module compiled for the Nexus 10 is included as well, which can be loaded via punchmod (at least in PAC), so you can access shares with Ümläüts in them.
Prerequisites: SManager, SMWidgets, and a working Busybox install (I use Stericson's Busybox Installer).
1.) Extract nls_utf8.ko and punchmod from the attached .zip file and put them in /system/lib/modules. You can put them in some other place as well, but my scripts need to be adjusted then. Next, give the files sufficient permissions:
Code:
chmod 644 /system/lib/modules/nls_utf8.ko
chmod 755 /system/lib/modules/punchmod
2.) Optional: if you want the module to auto-start, create a file called 00punch-nls_utf8 (or whatever you like) with the content below, put it in /etc/init.d and chmod it to 755. To check if nls-utf8 is loaded after a reboot, type lsmod in a terminal window or adb shell - it should display the module name. If punchmod auto-detection fails, read here how to get the right vermagic string for your device: http://forum.xda-developers.com/showthread.php?p=41920265#post41920265
Code:
#!/system/bin/sh
sleep 10
/system/lib/modules/punchmod /system/lib/modules/nls_utf8.ko ""
3.) Here's the script that mounts a CIFS share. Edit the settings on top and either put your correct vermagic string as well, or delete the "$VERMAGIC" part in line 22 and try your luck with auto-detection. I put some sanity checks in the script, but it might not work for all directories in /sdcard (or, /data/media/0, to call it by its 'real' name/location). If you don't want to use the nls-utf8 module, just delete lines 18-23, and iocharset=utf8 in line 67.
Name the script mount-music.sh or something, put the script wherever you like, open SManager and navigate to the script. Run the script with SU permissions. If everything goes well, it will ask you to accept an adb RSA key, and then adb mounts the share. You can also add a desktop widget for quick access to the script with SMWidgets.
Code:
#!/system/bin/sh
# Your settings here
IP="192.168.1.123"
SHARE="Music"
USER="yourusername"
PASS="yourpassword"
MOUNTPOINT="/data/media/0/cifs"
VERMAGIC="3.0.31-CM-ga034655-dirty SMP preempt mod_unload ARMv7 p2v8 "
# Load cifs (if it isn't already loaded)
if [ `lsmod | grep -o cifs` ] ; then
:
else
insmod /system/lib/modules/cifs.ko
fi
# Load nls_utf8 brute-force style (if it isn't already loaded)
if [ `lsmod | grep -o nls_utf8` ] ; then
:
else
/system/lib/modules/punchmod /system/lib/modules/nls_utf8.ko "" "$VERMAGIC"
fi
# Check if cifs $MOUNTPOINT dir exists, create it if not, give sufficient permissions
if [ -d $MOUNTPOINT ] ; then
:
else
mkdir $MOUNTPOINT
fi
chmod 755 $MOUNTPOINT
# Check if $SHARE directory is empty - if not, unmount the share
if [ "$(su root -c busybox ls -A $MOUNTPOINT/$SHARE 2> /dev/null)" == "" ] ; then
:
else
/system/xbin/busybox umount -l $MOUNTPOINT/$SHARE
fi
# Create $SHARE directory if necessary, give sufficient permissions
if [ -d $MOUNTPOINT/$SHARE ] ; then
:
else
mkdir $MOUNTPOINT/$SHARE
fi
chmod 755 $MOUNTPOINT/$SHARE
# Starting adb
adb kill-server
export HOME=/sdcard
# PORT=`getprop service.adb.tcp.port`
setprop service.adb.tcp.port 5555
adb start-server
cat /sdcard/.android/adbkey.pub >> /data/misc/adb/adb_keys
stop adbd
start adbd
adb connect localhost
# Make sure we only use the first device (sometimes there is more than one)
SERIAL=`adb devices | head -n2 | tail -n1 | cut -f1`
if [ "$SERIAL" = "" ] ; then
echo "ERROR: Could not find ADB device.";
fi
# Mounting share via adb
echo Mounting share via adb...
adb -s $SERIAL shell su root -c /system/xbin/busybox mount -t cifs //$IP/$SHARE $MOUNTPOINT/$SHARE -o user=$USER,pass=$PASS,iocharset=utf8,cache=none,directio,CIFSMaxBufSize=130048,rw,file_mode=0777,dir_mode=0777,uid=1015,gid=1015
# If you started adb, then stop it here for security
adb disconnect localhost
stop adbd
PORT=`getprop service.adb.tcp.port`
setprop service.adb.tcp.port $PORT
start adbd
# Show some results
RESULT=`mount | grep $MOUNTPOINT/$SHARE`
if [ "$RESULT" = "" ] ; then
echo "FAILED! //$IP/$SHARE could not be mounted."
else
echo "SUCCESS! //$IP/$SHARE has been mounted on $MOUNTPOINT/$SHARE."
fi
echo
echo All done. You may close this script window now.
4.) This is the script to unmount the share. Name it unmount-music.sh or similar, and edit your settings at the beginning of the script. Again, run it in SManager with SU permissions, and add a desktop widget with SMWidgets if you like.
Code:
#!/system/bin/sh
# Your settings here
SHARE="Music"
MOUNTPOINT="/data/media/0/cifs"
# Check if $SHARE directory exists
if [ -d $MOUNTPOINT/$SHARE ] ; then
# Check if $SHARE directory is empty - if not, unmount the share
if [ "$(su root -c busybox ls -A $MOUNTPOINT/$SHARE 2> /dev/null)" == "" ] ; then
echo "$MOUNTPOINT/$SHARE is empty."
else
su root -c busybox umount -l $MOUNTPOINT/$SHARE
fi
fi
# Show some results
RESULT=`mount | grep $MOUNTPOINT/$SHARE`
if [ "$RESULT" = "" ] ; then
echo "SUCCESS! $MOUNTPOINT/$SHARE has been unmounted."
else
echo "FAILED! $MOUNTPOINT/$SHARE could not be unmounted."
fi
echo
echo All done. You may close this script window now.
Hope this helps some of you. It sure stumped me how incredibly convoluted this simple and much needed procedure has become on Android 4.2.2... just because of that multi-account stuff and new restrictions on adb.
Credits:
Script bits and nls_utf8.ko by H3g3m0n
More script bits by dafunk60 and jmtw000
Punchmod by Jann Horn
Punchmod info by idcrisis
Thanks man, looks awesome, I am going to try it on my 6800.
Do you know how to mount ext4 or ntfs sdcard on CM10.1 based roms?
Removed the original post, still trying to make it work!
I checked vermagic in some existing ko files and found that it is exactly the same as yours.
Sent from my GT-p6800 using Tapatalk HD
m0bster said:
Removed the original post, still trying to make it work!
I checked vermagic in some existing ko files and found that it is exactly the same as yours.
Sent from my GT-p6800 using Tapatalk HD
Click to expand...
Click to collapse
You can try loading the UTF8 module without vermagic string as well, it should work on PAC. Or, make sure you have a blank space at the end of the vermagic string, it is required. Maybe read the short tutorial here: http://forum.xda-developers.com/showthread.php?p=41920265#post41920265
dfkt_ said:
You can try loading the UTF8 module without vermagic string as well, it should work on PAC. Or, make sure you have a blank space at the end of the vermagic string, it is required. Maybe read the short tutorial here: http://forum.xda-developers.com/showthread.php?p=41920265#post41920265
Click to expand...
Click to collapse
I finally managed to mount cifs shares, after loading original cifs and punmode load of nls_utf8.ko.
But I mounted it with cifsmanager. The script always shows "failure to mount" !