before 6 days i have flash my phn and install rom nero v3 and kernel voodoo ,,,after two days i have install stock kernel when phone reboot after installing then phone would totaly off and would not turn on,,,,,how can i solve this problem,,,,,i have installed sdk and odin in my pc how to solve this with odin
thanx to t-mobile senior members
Flash back the voodoo kernel with odin....should fix your problem.
Does it turn on with the charger cable plugged in? Is it plugged into a PC USB or some sort of external charger?
but phone is totally off how to flash with odin
no charing not working as well as usb cable
will odin flash died phone ?
Related
Hi guys,
Im actually using samsung galaxy s GT-9001 and have recently ran into a serious problem. actually two
Problem 1 : Usb cable malfuction
Im unable to connect my phone to pc, windows reports unrecognised device (was able before, tried few PC, cables) , furthermore im unable to charge my device unless i remove the battery, connect the charger then put the battery back up. Also noticed if i just put the charger on turned off device it boots instantly (skiping the option to charged as turned off), it does charge over USB, but does not recognise it.
Problem 2 : How to return to stock recovery and rom without USB
In regards to my problem number 1 , i have decided to give a shot at warranty, unfortunately cannot get rid of my CWM and custom ROM without ODIN. Any ideas how i could go back to stock rom + stock recovery without USB cable?
ps: Only created this thread as my last resort, after countless hours of browsing and testing. Please help
furthermore im unable to charge my device unless i remove the battery, connect the charger then put the battery back up. [/QUOTE]
Have you tried cleaning the contacts on battery and phone?
MogiMogi said:
Problem 2 : How to return to stock recovery and rom without USB
Click to expand...
Click to collapse
You can try Mobile Odin and also these to resolve connection problems
I have a hude problem my phone won't charge or connect to the PC.
Although the pnly way I can connect is in download mode to flash a rom using odin. But other than that nothing happens.
When the phone is turned off and I plug the usb cable in the bettery icon with the circle in the middle to show it is loading pops up and then goes away again just after coming up and the phone doesn't charge.
I have tried flashing the latest firmware using odin and have done a full factory reset more than once.
Please anyone have some help
heinrichdut said:
I have a hude problem my phone won't charge or connect to the PC.
Although the pnly way I can connect is in download mode to flash a rom using odin. But other than that nothing happens.
When the phone is turned off and I plug the usb cable in the bettery icon with the circle in the middle to show it is loading pops up and then goes away again just after coming up and the phone doesn't charge.
I have tried flashing the latest firmware using odin and have done a full factory reset more than once.
Please anyone have some help
Click to expand...
Click to collapse
Its possible one of the pins in your charging port is faulty or damaged I would warranty the phone or contact mobiletechvideos.com they do charging port repair as well.
Sent from my GT-I9505G using Tapatalk 2
It is possible that your phone does not have usb drivers installed....change you rom and comeup to stock and see what happens
Hit like if i helped you
I did install the latest stock official firmware from sammobile and still this didn't solve the problem, so i took my phone in to be looked at by my mobile network provider which will probably send it to samsung.
What was weird for me is that when the device is in ODIN mode then the pc picks it up but other than that nothing. I mean i could flash through odin successfully but the charging and PC connection didn't work even with official stock rom from Sammobile.com
Thanks for the replies.
Flashed the KitKat like everyone did and now my computer does not detect my phone... And phone shows that it's being charged even after i plug out my usb cable... :'(
I have reflashed the firmware multiple times...
(EDIT)
I did flashed the 4.4 bootloader ... My phone did not boot without flashing the boot loader... I'm now certain that something is wrong with my firmware... Because odin detects my phone pretty well...
- I have few problems now my phone does not detect when i plug it in the usb wall plug , means doesn't show that it is charging
- Or it shows that the device is charging even when the usb is not connected...
- PC does not recognize it
navenvehan said:
Flashed the KitKat like everyone did and now my computer does not detect my phone... And phone shows that it's being charged even after i plug out my usb cable... :'(
I have reflashed the firmware multiple times...
Click to expand...
Click to collapse
pull the battery out see if that helps and see if theres a kies update
Nope, didnt show anything... I guess i have to cry louder.. But thankfully it's not hardware problem
Hello,
I was running Fenny's Stock Rom 4.2 on my S4 i9505 I was going good and then i flashed Stock 4.3 using mobile odin pro.
Now S4 is stuck at Samsung Galaxy S4 GT-I9505 Screen.
worst than that my laptop was not detecting the phone through USB cable. When i used to connect the cable with my phone it was not asking for any connection mode option in the notification.
Now I guess I can't flash it through odin using PC
Any other way out? How can i fix this?
Waiting for advices and suggestions .....
You do know you have to boot the phone into download mode in order to flash roms with Odin on the PC, right?Use the original cable and try different usb ports.
Or, if you had a custom recovery, does it work anymore?
Thanks for your response,
Yes i am in download mode waiting for odin to make me smile ... But nothing..
No costum recovery everything went back tu stock thats why i am stuck now ��
Then try the cable and usb port thing. It's mostly caused by those.
Tried 4 different ports and two cables, my other samsung phone can talk to my pc using same port and cable ��
So is this means my phone's port is not working for data transfer? even though it is charging my cell phone.
Power Button+Home Button+Volume Down Button
Sent from my SM-A500F using XDA Forums
That ll take me to download mode and its if no use as i wrote above my cell is not being detected by odin/pc..
Try reinstalling usb drivers
or
another PC
it worked FOR me
Tried windows 7 and then 8 and mac book still no luck
You might have to take it to repair center and have them reinstall the software. They have tools that we simple mortals don't
it was was the hardware issue infact the charging port was having it Rx/Tx Pin faulty as per the lap guy in my area. He replaced the strip for it and now I can flash any thing using odin
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
Try disabling and enabling USB debugging while the phone is connected.
GDReaper said:
Try disabling and enabling USB debugging while the phone is connected.
Click to expand...
Click to collapse
Thanks for your reply, i've tried this many times, even when typing "adb devices", adb can't find my phone and it doesn't appaer in windows Device manager
loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
I have the exact same probleme... Odin work but no mtp....Have you found a solution ?