Hello,
I'm having a hard time with my sdcard.
I've did some partition alignment per a guide and everything was fine. I then did some testing as of what type of partition I want for my data2sd, tested many thing. Then, I had a problem: couldn't restore backup anymore, recovery says folder not found. I mount the sdcard in my computer and check, everything is there. Unsure, I put it back in my phone (desire), boot back in recovery, mount sdcard in adb and do a ls.
Very ugly what's showing:
Code:
ls: ./░☺õ║?/◄[email protected]▒?: No such file or directory
ls: ./?íÔÓ??}õ.??¶: I/O error
ls: ./¾þ¶?±?z?.↔↨Ó: I/O error
ls: ./areyÕd▒/./³?: No such file or directory
ls: ./±½?????\.Õ§?: I/O error
ls: ./5?¶"☼??*.?t¢: I/O error
ls: ./?¶2?♣õ·þ.☻\³: I/O error
ls: ./WãKnU?;¸.s: I/O error
ls: ./???????◄[email protected]?Ý: I/O error
ls: ./N?3??^?.♣^|: I/O error
ls: ./??Û ♦∟ni.??±: I/O error
ls: ./¹l??aþ??.?ÙR: I/O error
ls: ./¸]?ݵ♣]?.Àm↑: I/O error
ls: ./A¢?┐k?>F.?Y<: I/O error
ls: ./?þ░*╗9o÷.Ûv?: I/O error
ls: ./À½?X?☼@b.v: I/O error
ls: ./???v?yµ5.XOV: I/O error
ls: ./??q÷↔?k?.?!?: I/O error
ls: ./▀??▒e?J?.☼♣♀: I/O error
ls: ./ 9??ß?=?.§↕─: I/O error
ls: ./3
???µ.=??: I/O error
ls: ./♀??NóZÝ0.‗g◄: I/O error
ls: ./p~?z 8?P.x5?: I/O error
ls: ./?o!l??P☺.Á‼µ: I/O error
ls: ./♦Ù∟ Ã$??.?þ?: I/O error
ls: ./?+Ú◄♦9??.1?░: I/O error
ls: ./‗??`¸b?.‗?f: I/O error
ls: ./◄³Ú^c??‼.#¬?: I/O error
ls: ./♂W§Ñ?GõS.À÷p: I/O error
ls: ./w?Ú¯??Ô▀.?←?: I/O error
ls: ./¸l░Ú??u?.9óÍ: I/O error
ls: ./▬◄?v‼w←f.y±Õ: I/O error
ls: ./Úf&?÷ú\À.Ý*P: I/O error
ls: ./#?‼~?♠?R.M?╔: I/O error
ls: ./gó\m?Õ
?.t?x: I/O error
ls: ./¢+?Ú◄÷░?.Õ→?: I/O error
ls: ./╗f³Ók▼c+.↔á‗: I/O error
ls: ./?+?ó#í??.g??: I/O error
ls: ./h\ytv??¸.??~: I/O error
ls: ./?³kgg
/?.¶y?: No such file or directory
ls: ./??
¼???÷.?iD: I/O error
ls: ./e0☺`?)@?.↓?f: I/O error
ls: ./ÁO∟L%─↓?.l←p: I/O error
ls: ./║Y¶?▬║??.;♫ó: I/O error
ls: ./??Ýz¼57?.½3►: I/O error
ls: ./agá½¼▓ZO.?y?: I/O error
ls: ./Q??a♣◄TV0o: I/O error
ls: ./¸l♀d?r☺=.$+◄: I/O error
?: I/O error+p.?
ls: ./kþ`9.*h]: I/O error
ls: ./dÙg#p5?[.◄`?: I/O error
ls: ./)´ã¸╔▓L♀.Úv?: I/O error
ls: ./O§▬?¾(?←.þ¶♫: I/O error
ls: ./¶♦OÚý←??.g?o: I/O error
ls: ./"??♣1?x.☼4c: I/O error
ls: ./?F┐↨?3}‗.¯#þ: I/O error
ls: ./J~┼◄ánú5.¯*─: I/O error
ls: ./???3Ù?↨☼.?{?: I/O error
ls: ./n?¾?♣?↑.¯♠?: I/O error
ls: ./u∟?}H*?¸.♠l║: I/O error
ls: ./k??↔õvwj.5 ?: I/O error
ls: ./☻?{4^?¯%.Sµ?: I/O error
ls: ./←∟´
?♠j5.▒,?: I/O error
ls: ./??♣?íc?.?_?: I/O error
ls: ./♂hÔq?▀Ý?.☼¾¶: I/O error
ls: ./
]?z?‗¯w.?+?: I/O error
ls: ./Ñ???³╝ú?.▬?♣: I/O error
☻7÷???☻
.?‗? -.{J?¯ú?.-▒õ ??w?Þ?t4.½{* [?À6?I♫J.>Ej ▒?kÕ?ÚÕ.←^◄
♥n♠(.??a.??_ 2!◄¸mÚk▼.?í║ ??~?õ?*½.↑↔' ^?0{♫↨.e?y ¢?fµ▓?=w.ZÚC
?já8q-§.☺ 4~[tÁb7c.?↕w ??▀??+??.B?A ^j??¢,?..?O↔ ã╝¶?Õ?áf.?nk
?^? p??.¶?‼ 6?8?⌂?0).?Ù` ??▀??T:¶.Ó?f c%♥??*P¶.↨?↔ Õ9↕??z↓p.*‼?
♫▬µ?^`?╗.¢#á >e? ?Û??.wm? ??¯Ñ¼y?o.
eÝ d??±kv:÷.?#▼ Ú??q|qþ*.1
♫c?_?~u?.☼\$ ?↨[email protected]~µ ?^v??┐?.??§ d?¢¼2║‗?.#;? ¹³↓+♫_?w.þa▼
☼??µ↔l?g.??? ?↨▓→◄(Ù=.??÷ ?m;▓Ñk_d.f?? eÔ▬?Õ*$m.I]À ³J░b??=J.ý?╗
→Ú◄║>·@-.^?♠ ?'??♥?Û?.↓?? ?⌂??½zw?.?ÔU p?Ù)t¶õ5.?╝´ ³\??‗½õ▓.bn?
↔1ó?g??G.2?? ?8?'?³??.w ?½7k?▀?d.?☻õ s?Ó¨?h?m.♦?t
+Í??v.?e♫ ?³WEh??.??▼ wc¬Ñ ↓?§[email protected]┼
!???6u).w‗À ???}nb??.??? E?▀}!9Á?.[[email protected] zÀ?h*╗?s.?LP
"(?t??7r.¼ÚE ??[?íý?p.r?¸ X7t?$?iD.2Ná ó$?cr`?¯.7??
I've tried formatting the partition, repartition the whole sdcard, change the head/sector count to stock, doesn't change anything.
What's funny is that only those two are having a hard time reading from it. I can mount it into windows or read from android without any prob.
Is my brand new sd already dead?
Thanks
ok that's just weird....
I just tried "format sd-card" in recovery. It took 0 seconds to format. I then tried many time (about 5 time) and check in process dump to see no difference. But then, I mount in adb shell and the output is ok. I check in recovery, I can fully restore... Don't know what's going on...
EDIT
I think I found the problem, but doesn't know how to solve it.
If I used the backup/restore feature to mount the sdcard (like if I do mounts and storage -> sdcard) in recovery, it badly mount the card. If in adb, I do mount sdcard, everything is fine...
EDIT
I found something. I partition using fdisk in ubuntu into my vbox, telling him to remove all partition. I then go in windows and see a partition with a ****ed up name. Go into android and it sees a partition but can't read it. I format into windows, go back in android, run fdisk and I see 4 partition with index out of bound error.
Well, I shutdown my ubuntu vbox, asked windows to do a long format of the sd, not just the partition. After that I used panasonic SD formater, and then finished with easeus partition master to create 2 partitions with 16k cluster. Now, everything work the way it should.
fixed
Related
stderr:
stderr: losetup: /dev/block/loop0: Device or resource busy
stderr:
stderr: ioctl LOOP_SET_FD failed: Device or resource busy
stderr
Im trying to use some of my milestone2 internal storage as a virtual sdcard following the storage.img method, but when i try to mount it, this is the output i got.
any one has any idea what it could be? I havent found this problem in any other user
Im currently at 2.3.6 Brazil oficial
Thnks!
I've been trying to load back track 5 on my nexus 10 and this is the error message that I get when I attempt to run bt5.
[email protected]:/ $
[email protected]:/ $ cd /sdcard/bt5
[email protected]:/sdcard/bt5 $ su
[email protected]:/storage/emulated/legacy/bt5 # sh /data/data/com.zpwebsites.linuxonandroid/files/bootscript.sh /sdcard/bt5/backtrack.img
Checking loop device... MISSING
Creating loop device... OK
mount: mounting /storage on /data/local/mnt/external_sd failed: Invalid argument
No user defined mount points
net.ipv4.ip_forward = 1
chroot: can't execute '/root/init.sh': No such file or directory
Shutting down Linux ARM
umount: can't umount /data/local/mnt/external_sd: Invalid argument
1|[email protected]:/storage/emulated/legacy/bt5 #
Can someone please help me with this?
Are you rooted?
I am currently trying to install bt5 using the instructions I found here on xda.
I have successfully rooted the a500 tablet (or at least ever check I can perform says so)
I have busybox installed from the market
I have supersu (after starting with superuser)
I have ES File explorer and can even go root R/w with it
but when performing the steps in the aforementioned tutorial this is what happens
Code:
[email protected]:/ $ su
[email protected]:/ # cd sdcard/bt5
[email protected]:/sdcard/bt5 # sh bootbt
mount: permission denied (are you root?)
Loop device exists
mount: mounting devpts on /data/local/mnt/dev/pts failed: Input/output error
mount: mounting sysfs on /data/local/mnt/sys failed: Input/output error
net.ipv4.ip_forward = 1
chroot: can't execute '/bin/bash': Input/output error
Shutting down BackTrack ARM For Xoom
failed: I/O error
failed: I/O error
is there somthing I am not catching here, something I should be looking for
Hi!
I am trying to mount NTFS with ntfs-3g
I have root terminal open.
I write:
ntfs-3g /dev/block/sde1 /sdcard/ntfs
The path /sdcard/ntfs exists
I get error:
ntfs-3g-mount: mount failed: Permission denied.
What should I do?
I am currently trying to port Plasma Mobile to the 6P. I have gotten through all of the configuration, minus setting the LD_LIBRARY_PATH (causes bootloop, manually export before running lxc-start) and the screen brightness control (Nexus 5/X are LCD). I am currently stuck trying to get lxc to launch the system. It throws the following error:
Code:
1|angler:/ # lxc-start -n system -F
The configuration file contains legacy configuration keys.
Please update your configuration file!
lxc-start: system: namespace.c: lxc_clone: 67 Failed to clone (0x2c020000): Invalid argument.
lxc-start: system: start.c: lxc_spawn: 1253 Invalid argument - Failed to clone a new set of namespaces.
lxc-start: system: start.c: __lxc_start: 1459 Failed to spawn container "system".
lxc-start: system: tools/lxc_start.c: main: 371 The container failed to start.
lxc-start: system: tools/lxc_start.c: main: 375 Additional information can be obtained by setting the --logfile and --logpriority options.
I'm not too sure as to what is going on with the error, as I have never used lxc before.
Attempting to set the logfile throws the following, even after remounting to rw:
Code:
angler:/ # lxc-start -n system -F -o log
lxc-start: system: log.c: log_open: 383 failed to open log file "log" : Read-only file system
Extra info:
LineageOS 14.1 latest nightly
pm-rootfs-20170210-152001 for the rootfs
Latest lxc-android
Any help is appreciated, as I am kinda stuck right now.