Database Users

ad hoc for xoom

so with my minimal knowledge of phone stuffs ive kinda learned that when i run the wireless tether for root app on my phone it uses ad hoc to supply other computers with internet... basically im asking, will my evo be able to supply my xoom with internet?

Not at the moment, no support for Ad-Hoc networks in HC, not sure if there ever will be - very annoying.

I'm not sure but I believe there is a new version of Wireless Tether that will allow such a connection. When I first tried the Kindle connecting to my DX, it wouldn't connect. With the new version, it does.
Sent from my DROIDX using XDA App

My Xoom connects to my DX with no problems.

Go download Wireless Tether from the website. The experimental one is called Wifi Tether now. Works like a charm for infrastructure mode so that the Xoom can tether with your phone. Also Bluetooth seems to work fine as well.
Sent from my DROIDX using Tapatalk

Is the Wireless tether for the phone or the Xoom (or both)? I need an option for the iPhone in case the steps posted here won't work!

is this an app that enables ad-hoc detection on the Xoom,
or
does it just provide a full wifi hotspot tethering feature for Android devices?
I also use an iPhone which supplies an ad-hoc hotspot connection that I need my Xoom to recognize and connect to.

So does that mean you got it to work that way? Is the app available through the Market?

No its not available in the market. Google wireless tether and look for wifi tether. The new app sends the signal via infrastructure mode. I think it applies to certain phone like Droid X and EVO.
Sent from my DROIDX using Tapatalk

The Wireless Tether app is ran on the host phone wanting to be turned into a wifi hotspot. There are certain phones that run in Ad-Hoc mode in default (aka Droid 1) and the only option to tether the Xoom to them is via bluetooth. As others have said, the new version "WiFi Tether" is apparently enabling infrastructure mode rather than Ad-hoc mode, something that the Xoom can actually connect to.
There is no app that you install on the Xoom. When the WiFi Tether is ran on the host device, the Xoom just connects to it as a WiFi router and works just fine (or bluetooth if thats what you're doing).
So OP, if you can't get the new version of WiFi tether to work for you and your Xoom, try the Bluetooth tethering option, it's been shown in detail in a thread here how to do it, and it should work just fine.

funnycreature said:
Is the Wireless tether for the phone or the Xoom (or both)? I need an option for the iPhone in case the steps posted here won't work!
Click to expand...
Click to collapse
The app is for android, and for the host device not the Xoom, so you'll need to Bluetooth tether your iPhone.

wpa_supplicant
I understand exactly what the OP is talking about, as i'm trying to do the same thing. What makes matters worse, is that ad-hoc connections ARE possible in android. Meaning android can connect to ad-hoc networks, but it requires swapping out the wpa_suppplicant file in system/bin with a modified one that doesn't filter out ad-hoc networks.
i've even tested this on my EVO, and it connects to other android phones incapable of broadcasting in infrastructure mode, it even connects to my ubuntu netbook broadcasting in ad-hoc...
(if you want to see what i'm talking, just search the forums for wpa_supplicant, something will turn up )
I've tried doing the same "fix" with my xoom, but it doesn't take. Using ADB or root explorer, i've replaced the orignal (making sure to save a copy just in case) and fixed permissions to 775, but it doesn't take. The wifi antenna will turn on, but it doesn't find anything once being replaced, not even saved networks or access points. I can get wifi back by restoring my backup, but i'm at a loss as to why it doesn't work on the xoom (3.0) but does with my evo (2.3).
as a side note, i'm using the right replacement for the wpa version returned by entering
"wpa_supplicant -v" in a terminal emulator or adb. It returns version v0.6.10 and there is a working, modified, v0.6.10 that should make things work, but doesn't....
anyway, if anyone has any input, i would love to hear it!

I am in the same boat. Regardless of whatever permission settings I have tried (mentioned in the dev forums that I can't yet post in), I still get a dead wifi with the new supplicant file.

Ah, I feel better now. It must have been the supplicant file, as I found this other one and it worked without permission modifications first time out.
You will have to google "xoom supplicant" and use the file found on the first response (android.net)-I can't post the link- the downside to attitude having, overlord type forums is inability for new users to provide any help, or at least with any convenience.

i try connecting my xoom to my computer, and it wouldn't work. i have the "Intel My Wifi Technology" but each time i set up a connection, the xoom finds it, but will take like a minute trying to connect and all i see on the xoom is "Obtaining IP address". it shows on my computer that a new device is connected. maybe this only works computer to computer. cuz i have had success with another laptop connecting to my computer with no problem.

I am using the Launchpad kernel and the WPASupplicant file and am connected to my phone's ad-Hoc network now. I used the beta Wi-Fi Tether and it worked great, but crashed my Samsung Galaxy S at least twice a day. So I installed the WPA file without setting any special permissions, just used Root Explorer to copy it an it worked fine.

Is there a way to connect on a ad-hoc hostet by a laptop (win7) yet?
That would be interesting, cause if it work this way, it will work for every phone or something else!

Hey Guys,
i am having a little problem. i am using the Intel My Wifi Technology. and i don't know if i am doiing something wrong or this is just not possible. but i try connecting my xoom to my laptop, and it is not working or connecting. i get a message on the xoom that say's Obtaining IP address", but nothing happen on the xoom. is this not yet possible on the xoom. i don't know if this is consider ad-hoc network or not, cuz i am new to all this.
but here is the link to intel website for the program i am using as a wifi hotspot.
http://www.intel.com/products/wireless/mywifi.htm
and here is a video of what the program does.
http://www.youtube.com/watch?v=AuAQjR76A68
anyone with knowlwdge on this please help me understand what i am doing wrong or not doing. or even if this is a possibility.

If you're not opposed to rooting your Xoom, here's another option. I just unlocked and rooted my WiFi-only Xoom yesterday, and inserted the supplicant file in this thread: http://forum.xda-developers.com/showthread.php?t=1033314
It works like a charm! I'm running a WinMo Touch Pro 2 with WMWiFiRouter, and the Xoom now sees and properly connects to Ad Hoc networks. And, it still works with all other networks.
I don't know which way you prefer to attack the problem (from the Xoom or the phone), but I've been thrilled ever since I got all this done yesterday. Everything else on the Xoom is great, and now I've got the working SD card as well.

supremecream06 said:
Hey Guys,
i am having a little problem. i am using the Intel My Wifi Technology. and i don't know if i am doiing something wrong or this is just not possible. but i try connecting my xoom to my laptop, and it is not working or connecting. i get a message on the xoom that say's Obtaining IP address", but nothing happen on the xoom. is this not yet possible on the xoom. i don't know if this is consider ad-hoc network or not, cuz i am new to all this.
but here is the link to intel website for the program i am using as a wifi hotspot.
http://www.intel.com/products/wireless/mywifi.htm
and here is a video of what the program does.
http://www.youtube.com/watch?v=AuAQjR76A68
anyone with knowlwdge on this please help me understand what i am doing wrong or not doing. or even if this is a possibility.
Click to expand...
Click to collapse
Is it right that you host a Wifi on your computer and tether internet to you tablet? I think its the usual problem android and ad-hoch, witch not work!

[Q] adhoc and vpn does not work after dexter 1.4

I just got my A7 a few days ago. I did the elocity firmware, the latest dexter mod and the adhoc fix.
1. I cannot get the vpn to work. I am trying to get it to connect to my Cisco ASA at work and no matter if I try ip or dns name, it fails immediately. The connection never leaves the A7.
2. I rooted my Motorola Droid and put Barnacle on it. My laptop can wifi tether to the adhoc network off the phone with no problems. My A7 can see the adhoc, tries to obtain ip address over and over and just doesn't connect. It doesn't matter if I use proper wep or non matching wep key, same results. This is frustrating.
I have re wiped, re firmwared, re dextered several times. Out of ideas. Going on vacation i a few weeks and need to be able to tether.
Help!!!!

hi I had to do this to my samsung intercept running barnacle to make it connect. mabey it will help you.
http://androidforums.com/samsung-intercept-sprint/194068-barnacle-wont-run.html
I use the legacy version of barnacle. I think its available on authors site if not on market
scroll down page a little to see instructions for the fix in the link

Try installing googles wifi tether and run it without wep or wpa and see if you can connect that way.If you can connect then enable the Access control and set a ringtone to let you know when there is a connection,that way you can set it up to where you are the only one that can use it and know if there are any other connections besides you. Go to the link below to get the latest download and be sure to read up on it.This is what I use all the time with 0 problems.If you have any problems with it pm me and I will try to help you with it as much as I can.
http://code.google.com/p/android-wifi-tether/downloads/list

Update
I did as suggested with both Barnacle and Google Wifi Tethering with wep turned off. And it works. Why is that? If I create a wep key in either Barnacle as ascii or hex, it doesn't work whether I use ascii or hex equivalent on the eLocity. With the Wifi Tethering app, it only has ascii option and still no luck. Until a new Dexter comes out that may fix this problem (at least for me), I will probably just use Barnacle with max 3 connections and by default new clients gets no nat. I will manually allow nat from the phone to control access.
What sucks is I cannot use my buddy's jail broken iphone for wifi tethering either. My velocity has the same problem passing passwords to ad-hoc networks.

As far as Ive read and been told Android will not connect with wep but what you said you were going to do will work just fine,that's basically what I do,but when Im going to be in one place for a while I will use Google's wired usb connection (link below) to connect to my laptop and then just share its internet connection with other laptops,phones, game systems etc.Either way I think its a good idea to have both the wireless and wired installed just in case and there free so what the hell.
I hope some of this will help you out. Good luck and have a good vacation.
http://code.google.com/p/android-wired-tether/

Wifi Xoom and BT Tether

I've found several threads on the subject of Tethering a Xoom via BT and Wifi but I'm not having much luck and there's a lot of confusion about providers/Xoom versions/phones, etc. so rather than tag on to a thread I hope it's ok to start a new one.
I have the following:
Wifi Xoom (NOT the Verizon version, the one that just came out on March 27th here in the US)
HTC Hero GSM - completely unlocked (purchased in Europe). Running Android 2.1 standard update from HTC. I'm using the AT&T data plan but device is not an AT&T device at all.
I would like to see if I can Tether the Xoom to the phone and use the data connection I have on it. I understand that the Xoom's chipset doesn't allow for Ad-hoc networks. I've tried to do a Wifi Tether and although that works from my Laptop to my Phone the Xoom doesn't see the ad-hoc network. I don't believe there is any way for me to make the Wifi Tether work in Infrastructure mode so I don't think there is an option there (unless the Xoom can be modified somehow to see Ad-hoc).
So now I'm trying to use Bluetooth Tethering. I've tried both PdaNet and Wifi Tether (v2.0.7 and phone rooted via SuperOneClick). Both seem to start up fine and are running. I then pair the two devices but as many others have reported, I don't see any Tethering options on the Xoom so I'm stuck.
I've tried different orders of things... run Wifi Tether, pair, vs. pair then Wifi Tether, work with Airplane mode on vs. off, Wifi on vs. off, etc. but I never see that Tether option show up.
Anyone have this working with an HTC Hero GSM by any chance? Note that this is the Wifi-Only Xoom which seems to have different features than the Verizon 3G Xoom. Could it be that the Hero itself doesn't support this profile? Or can the Xoom be modified to force it to think the device is tetherable.
I'm not sure if rooting the Xoom would help any or maybe flashing a custom ROM like CM7 on the Hero would help any. I'd prefer not to have to do this but if someone has this working with my exact configuration I'd give it a try.
Any help would be appreciated.

From what i know, most tethering tech /apps are establishing a ad-hoc network' which the xoom isnt capable of...

I too have the Xoom wifi only version with a HTC rooted CDMA Hero.
As everyone knows now the Ad hoc will not tether with the Xoom infrastructure as of the latest.
I too get full bluetooth tethering signal from Wireless Tether, but like you the Xoom will "pair but not connect". As you, I am confused as to whether it is the Hero or the Xoom Wifi which will not connect to the bluetooth tether.
I suspect it is the Xoom Wifi, but would also like a definitive answer and better yet a viable solution.

I have no issue tethering my Xoom (Wifi model) with my Verizon Motorola Droid (1 Gen) over Bluetooth.
My Droid is full rooted with custom Gingerbread ROM (2.3.3) and Overclocked Kernel from ChevyNo1. His kernels are everything enable such as tethering and VPN. This might be the difference for some.
The one annoying thing is that everytime I enable the hotspot on my Droid, I have to go into the Xoom settings and enable tethering on the connection to my Droid. This also has to be done if either device goes not a range and brought back. I am trying to find a widget or a Tasker script to auto enable this.

Be sure to already start the wifi tether program on your phone (selecting the blutooth option on it) then bring up the blutooth settings menu on your xoom, just press and hold the little wrench you see to the right of your phone icon. it should bring up the tether option...just press that and you should see it conect via blutooth.
Just be sure to have the wifi tether app on your phone already on and set for blutooth. This works for me everytime (running the atrix) and shoujkd also work for your phone too.

Still no luck on my side with the Tethering on while I do the pairing and/or when I touch the wrench icon.
I'd like to understand more about how the Bluetooth profile is detected. Does my phone have to publish out a certain profile? Or does the Xoom have a list of device types that it knows are tetherable? I've read on another forum that it seemed like Motorola devices like the Droid worked whereas HTCs didn't seem to. I'm wondering if the Xoom detects the type of phone it's connecting to and decides whether it's tetherable or not... Anyone know? If this is the case maybe there's some file that can be tweaked on the Xoom to include additional devices or change the phone to broadcast out a different device name, etc. Maybe I should try changing my device name to 'Droid' or something.
Just guessing at this point....

I had the same issue with my droid, bluetooth tether is a pretty good alternative. I made a video of it, works with most phones with that create the Ad-Hoc. Check out video below to see the easy steps involved. Root on phone required.

Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....

rosso said:
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
Click to expand...
Click to collapse
I ran into a little bug, and it wouldn't recognize my droid. I had to unpair and turn on the bluetooth tether app. Then pair. The xoom then recognized the bluetooth tether. Hopefully this works, I apologize if it doesn't.

My wifi Xoom works perfectly paired with a CM7 Nexus One.
App: wireless tether
pd: key is the wrench

I tried renaming the bluetooth device name to 'Droid' but that didn't make a difference. I'm sure I'm following the same steps as in the video. Somehow the Xoom doesn't see the Hero as a Tetherable device...
Maybe there are some differences in Bluetooth chipsets?

Wifi tethering works with the Desire Z or the G2
I assume the network it creates is not an ad-hoc otherwise the xoom wouldn't have recognized it?

It's either not ad-hoc or you're using Bluetooth. You'd have to explicitly choose Bluetooth tethering in the Wireless Tether app so I assume you're using Wifi.
From what I understand some phones (the ones that are meant to be used as wifi hotspots) do broadcast in infrastructure mode rather than ad-hoc so I assume that's why it works for you.

Also of note is that Honeycomb only supports PAN tethering, and not DUN tethering.
Your phone also has to have "bluetooth tethering" turned on (however you do it, I don't have an android phone) so that the Xoom can discover the PAN bluetooth service.

Interesting. Something to read up more on. I'm using Wireless Tether to do the Bluetooth tethering but maybe I need something additional switched on. At least it's another direction to look at....
Seems like someone figured out how to get the Xoom to listen to Ad-hoc networks but that needs the Xoom rooted so I'll also research that. I prefer Bluetooth tethering since it uses less juice on the phone....

It does seem that "Wireless Tether" which is what I'm using on my HTC Hero, is running in PAN mode. If I look at the app's directory it has a pand executable, etc. and when I'm running the tether it is running pand in the process list.
Still, if I pair, even while it's running pand the Xoom still doesn't recognize it as tetherable. Grrr.... Wish I had another bluetooth client I could try to connect to see if it's the phone or the Xoom but I don't have anything else.
I'm wondering if it's because I have the Android 2.1 update for my Hero. Wireless Tether seems to support the 1.5 version of the Hero but doesn't mention 2.1. Maybe there is an incompatibility there...
Anyway, will continue to try to figure it out.

Rosso, your not on your own, I am still trying to figure this out on my hero running froydvillian. I have done the wifi ad hoc mod and thats working for me but BT tethering woudl be better, I will let you know If i ever find a solution.
I did see someone else loaded CM7 for the hero and then BT tether worked, but CM7 seems to have been pulled for the hero at the moment due to stability issues.

I have a droid eris (verizon's cdma hero) and I have the same exact problems but I'm on cm7and using wireless tether. I can get the to devices and connect via tethering but 5 seconds after that my phone reboots.

Just picked up a wifi-Xoom for my wife over the weekend. Tried to get it connected to my phone (HD2) as a wifi hotspot and was having problems (the ad-hoc problem). The xoom wouldn't even see the hotspot. I am running AmeriCanDroid 0413 build and it has wifi tether v. 3.0-pre11. So I switched back to winmo and still nothing, then I tried going to Darkstone SuperRam 1.5 (my fallback build). It has an older version of wifi tether, I think 2.06 or something like that and got the xoom to connect. I haven't had a lot of time to fool around with it, but it was able to get a network connection. Maybe you could try an older version of the wifi tether? I haven't experimented with the BT tethering yet. I don't want to root the xoom yet, maybe when my wife is tired of it.
/edit
Just checked the wifi-tether website and there is a new version of wifi tether and it supports softap which may help the xoom recognize the wifi hotspot.

Hi, I have just managed to get my hero bluetooth tethered to my htc hero.
The process I followed was basically what everyone has said:-
download wireless tether i am using 2.0.7
1. start bluetooth on phone and xoom (make discoverable)
2. Do not pair the devices yet
3. start up wireless tether, select bluetooth and tap to start the actual service
4. go back to bluetooth on your xoom and pair the devices
I then got an icon I had not had before and when I tapped the wrench I got the option to tether.
As for wifi tether your phone needs to put out infrastructure wifi for the xoom to see it, if its ad-hoc, you'll need to do the wifi mod so that he xoom sees adhoc
although as stated the new version of 'wifi tether' (which just seems to be the new name for the 'wireless tether' app) may fix that? but doesn't seem to support bluetooth as the 2.07 version does

[Q] Is there a tethering expert around?

I just took the plunge in to sd android on my TMOUSA HTC HD2.
I am using AmeriCanAndroid all stock HD2.
Previously I was able to tether to a vista laptop with wm6.5 fine. I am trying to use the wifi tether on the the android side now.
My goal is to tether to a unrooted Acer A500 Iconia. I am not sure if it is possible. I have read a ton and can't seem to find a clear answer to this problem. Several people talk about rooting the A500 so it can see a ad-hoc wifi tether. Unless I misunderstood I also read that a rooted android phone could be a real wifi hotspot not just an ad-hoc connection. I am not sure if I am mistaken or not. If someone could clear this up it would be great.
I am not sure if I am doing the tethering correctly on android. I setup the tethering with a SSID, encryption and the like. the A500 sees the wifi SSID but can't seem to obtain a IP address.
The odd thing is that when I start the wifi tether the yellow wifi icon starts in the top right corner of the phone. Then another wifi looking icon starts next to it. it says tethering and wifi hot spot. I have tried using it also but the system locks and reboots. if I don't mess with the second tethering and wife hotspot it doesn't reboot, but i still can't connect.
The strange thing is that the main tethering lets me setup SSID and the like but the tethering and wife hotspot will let me setup a different SSID. I am not sure why they aren't connected.
I thought this all had to do with the unrooted A500 but I tried the same windows laptop that I had tethered to with wm6.5 and it can see the wifi on the phone but can't connect.
Thanks for any ideas.

Intercept WiFi Tether and WiFi Error

Okay, so i recently rooted my Intercept so i could remove the crapware. I also tried to tether it so i could use my nook tablet everywhere. I tried https://play.google.com/store/apps/details?id=com.googlecode.android.wifi.tether
this one. and i tried barnacle. I realize now that one problem was that these apps make ad-hoc nets, and some devices don't see them. I didn't get barnacle working, and the other one worked the first time then got errors every time i tried to start it after. Now i've uninstalled those apps and i can't use my wi-fi normally. The check mark is unchecked in the settings and it says Error below it. I click it on and it doesn't work. Help? Any hints? Did i do something stupid?
Mason

Are you using a rooted ROM?
I've had luck on the Intercept using both Wireless Tether for Root Users and Widgetsoid and adding the widget to the screen with the Wifi Tether Icon.
I've always just done the settings changing the SSID to AndroidAP with open/no security. Using these settings I've had no trouble tethering devices from my TF101 to Windows and Ubuntu laptops.
If you are still having issues, drop me a line and I'll walk you through.
Cheers!