locked out of s7 - Ideos S7 General

I have friend who is locked out of her s7. She doens't remember her unlock pattern. Is there any way to reset the device?
Thanks.

On the huawei site is a faq section for huawei.
If i remember right one of the solution is to use the gmail account to reset the locker.
And is allways the hard reset solution or just flash the rom again.
Sent from my Ideos S7 using Tapatalk

goodoane said:
On the huawei site is a faq section for huawei.
If i remember right one of the solution is to use the gmail account to reset the locker.
And is allways the hard reset solution or just flash the rom again.
Sent from my Ideos S7 using Tapatalk
Click to expand...
Click to collapse
Thanks using a gmail account isn't an option (don't ask) and I haven't been able to find how to do a hard reset.

Find the firmware that you need on the modaco site, download, unzip and put the update.dat and the cfg file in a folder called dload on a freshly formated (fat 16) sdcard. 1GB will do. Power off the device, put the sdcard in and power on. A fresh flash of the firmware will be done in about 4 mins. when the screen shows OK, remove the battery and the sdcard. Put the battery back and power on. The device will go through the initial setup procedure and the device will be back to as out of the box. If you have trouble choosing the correct firmware then ask again as there is a generic version.
Sent from my Ideos S7 using XDA App

http://www.huaweidevice.com/worldwi...me=37891&attachmentName=S7V100R001C60B011.zip
This is generic firmware version that should be OK for you.
Credit to McSpoon over at Modaco for the link.
Sent from my Ideos S7 using XDA App

thanks a lot

Related

Galaxy S Pakistan

Samsung Galaxy S Gingerbread 2.3.3 for Pakistan with Urdu support and GPRS settings
This is the safest and fastest ROM available to flash on Pakistani GT-i9000 devices.
Download the zip folders from these 2 links and then extract them first:
http://hotfile.com/dl/119740568/d18d...6_Sbl.exe.html
http://hotfile.com/dl/119386723/337b...files.exe.html
Then open odin from the 2nd folder, put your phone into download mode by pressing volume down+menu key+power on,
connect it via usb cable to laptop,
whenn added is shown in odin, just put the PDA+PHONE+CSC files into odin and click start. (do not re-partition)
After 5min you're done
Just factory reset your phone for first time and enjoy gingerbread. This ROM is quite much a battery saver and extremely fast.
For complete data wipe and format complete phone to eradicate bugs already present, use PIT file also and check repartition before clicking Start Update in Odin,
then after 5min you're done. just start using your phone. no need to reset
titile of your post and content didn't match
Pl.share screenshots of this rom
Cyanogen Mod 7 CM7 for Galaxy S
http://www.theandroidsoul.com/cyanogenmod-7-cm7-samsung-galaxy-s/
Ufone
Does anyone know how to get the internet working on Ufone in pakistan for the galaxy s or any android handsets. I think it should be same for them all
Yes I know.it's very simple. Will guide you on it soon.let me find the settings link for you.
Sent from my GT-I9000 using XDA App
Suj1 here you go ;-)
http://propakistani.pk/2010/09/20/gprs-settings-android-ufone-zong-telenor-warid-mobilink/
Sent from my GT-I9000 using XDA App
say942 said:
Suj1 here you go ;-)
http://propakistani.pk/2010/09/20/gprs-settings-android-ufone-zong-telenor-warid-mobilink/
well i think why we not other rom.........u just show what is in ur rom and some screen shot and some detail plz
_-_-_-_Ali Khalid_-_-_-_-
Click to expand...
Click to collapse

How to preform a Hard Rest to "Out of the Box" status

Ok, for those of you who want/need to wipe your phone so that it deletes EVERYTHING so that you get it back to your "Out of the Box" status. I have the answer!
First: Back up What ever you want/need to back up.
Then: MAKE SURE YOU BACKED UP WHAT YOU WANT/NEED!!!!!
DOUBLE CHECK AND MAKE SURE YOU SAVED YOUR STUFF!!-Did I make myself clear that you will LOSE EVERYTHING!!!
Read This: T-Mobile Support Community: http://support.t-mobile.com/docs/DOC-2500
To do another reset, that will possibly leave some cache on the phone ( I know this, as I have done it and it left info on it).
Follow these directions:
A master reset restores the original factory settings and may erase all downloaded content, including ringtones, images, programs, and contacts stored in the internal memory. It does not erase data stored on the SIM card or memory card (if available).
To perform a hard reset, follow these steps.
1. Back up all necessary data that is on the internal memory. See: Back up device files: Samsung Galaxy S II
2. From any Home screen, tap the Menu key.
3. Tap Settings.
4. Tap Privacy.
5. Tap to clear the Backup my data an Automatic restore check boxes, if desired. (you might have to clear Automatic Restore first, the Back my Data)
6. Tap Factory data reset.
7. Tap Reset phone.
8. Tap Erase everything.
9. If prompted, enter the password.
ยท Note: The default password is 1234.
10. Tap OK.
11. If necessary, enter and confirm the password again.
12. Tap OK.
With that all said and done, now to the Good way to Really reset your device.
First: MAKE SURE YOU SAVE WHAT EVER YOU WANT TO SAVE!! I backed up my folders and my SD card just in case, using Samsung Kies found Here: http://www.samsung.com/ca/support/m...softwaremanual.do?page=MOBILE.SOFTWARE.MANUAL
Bare with me, as I am doing this from memory. I performed it like 3 times yesterday.
1. Start with the phone powered off.
2. Hold the followling 3 buttons all at once starting in this order, Sound UP, Sound Down and Power. (Yes, you will need to use 2 hands).
3. Once the Samsung Android Screen pops up (the second Samsung Screen) release the Power button and keep holding the Volume Down. You will get a bunch of commands (like 4 or 5), First I chose to wipe my Cache, then I chose the option to "Factory Reset Out of the Box" Status. To move where you want to go, simply use the volume up and down. Then to select the item you want, touch your HOME key on the bottom of the phone.
That's it!! You now have your phone back to the first day you bought it. If you didn't back up your apps, they you just have to spend time reinstalling them all over again..
When you start by setting it up, don't allow it to restore your info/settings. I think it's like the 3rd or 4th screen after you touch the Android to start setting it up. Just unclick the box's...or box..like I said, I did it over 24 hrs ago, and more than once...testing it out each time for different things..This one way made sure everthing was gone and I started out fresh.
Hope this helps!!
Well you can just type *2767*3855# in keypad and those 12 steps will be done in one
ithehappy said:
Well you can just type *2767*3855# in keypad and those 12 steps will be done in one
Click to expand...
Click to collapse
I agree.. Been doing that to erase everything
Sent from my GT-I9100 using xda premium
ithehappy said:
Well you can just type *2767*3855# in keypad and those 12 steps will be done in one
Click to expand...
Click to collapse
Really??? After I typed it all up and made it nicey-nicey...lol..
Ok,....good to know...but does it really clear out your cache???
I'm new to Droid's....so bare with me...
Homeuser66 said:
Really??? After I typed it all up and made it nicey-nicey...lol..
Ok,....good to know...but does it really clear out your cache???
I'm new to Droid's....so bare with me...
Click to expand...
Click to collapse
Well, you could dial that first.. After that boot to recovery mode and choose factory reset and clear cache and your set..
Sent from my GT-I9100 using xda premium
I cant even get mine to boot to that screen by hold up down then power on then holding just down on the second screen? Just boots to home screen like normal
Sent from my GT-I9100 using XDA App
ollyhw45 said:
I cant even get mine to boot to that screen by hold up down then power on then holding just down on the second screen? Just boots to home screen like normal
Click to expand...
Click to collapse
You're doing something wrong...but try their dial method...let me know if it works..
This wont remove root and custom kernels will it?
I don't know...I never Rooted my phone yet...don't plan on it yet...just trying to understand and play with the phone...
Next guide - how to install app ;-)
Sent from my GT-I9100 using xda premium
a9402169 said:
Next guide - how to install app ;-)
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Which app might that be?
Homeuser66 said:
Which app might that be?
Click to expand...
Click to collapse
I think you may find he was taking the P...
Dial method worked fine
Sent from my GT-I9100 using XDA App
Good to know.
Odia said:
I think you may find he was taking the P...
Click to expand...
Click to collapse
Sorry m8 that did make me laugh
ricey1986 said:
This wont remove root and custom kernels will it?
Click to expand...
Click to collapse
No it won't. I know that because I had to give O2 my Galaxy S2 to change my defect display. I already had rooted it and therefore the "custom-download-counter" wasn't 0 again. In order to get a flashed/rooted phone back to the "out of the box status" you need to:
1. Install a stock firmware & kernel
2. Perform a hard reset*
3. Use a special "USB-Jig" to reset the counter.
* I used the number, then removed the folders/files like "MIUI" and the images of the custom-roms I flashed. Then I bored into the recovery and cleared the cache.
Sent from my GT-I9100 using XDA App
TheSniperFan said:
No it won't. I know that because I had to give O2 my Galaxy S2 to change my defect display. I already had rooted it and therefore the "custom-download-counter" wasn't 0 again. In order to get a flashed/rooted phone back to the "out of the box status" you need to:
1. Install a stock firmware & kernel
2. Perform a hard reset*
3. Use a special "USB-Jig" to reset the counter.
* I used the number, then removed the folders/files like "MIUI" and the images of the custom-roms I flashed. Then I bored into the recovery and cleared the cache.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I confirm that this the only way to reset to out of the box, especially on custom kernels or root
You need to flash a full ROM through the new JIG cable not the old JIG. Old JIG won't reset counter
Be aware, most new ROMs here include old SBL and not the original to avoid the old JIG blacklisting
Better use an untouched "one file" ROM from samfirmware or grab your own ROM from Kies temps folder while it updates your phone
I personally like this way:
1- Use Odin through new JIG to flash an old official untouched ROM, 2.2.1 or older
2- Use KIES to originally update to the last official firmware, disable backup phone during this step
3- Hard reset and format internal SD card
Odia said:
I think you may find he was taking the P...
Click to expand...
Click to collapse
Mickey take.
---------- Post added at 10:49 PM ---------- Previous post was at 10:44 PM ----------
jonny_ftm said:
I confirm that this the only way to reset to out of the box, especially on custom kernels or root
You need to flash a full ROM through the new JIG cable not the old JIG. Old JIG won't reset counter
Be aware, most new ROMs here include old SBL and not the original to avoid the old JIG blacklisting
Better use an untouched "one file" ROM from samfirmware or grab your own ROM from Kies temps folder while it updates your phone
I personally like this way:
1- Use Odin through new JIG to flash an old official untouched ROM, 2.2.1 or older
2- Use KIES to originally update to the last official firmware, disable backup phone during this step
3- Hard reset and format internal SD card
Click to expand...
Click to collapse
They won't bother to check if it's the new bootloader or old bootloader. Why do you guys like to make things complicated. Occam's razor.
Also, unless Ben has updated Heimdall with the info I passed along from Odia or we get a new version of Odin, even if you use an integrated Jig cable the counter will not reset.
Simple way to get fully reset:
1. Flash desired firmware and reboot
2. Dial *2767*3855#
Job done.
jonny_ftm said:
I confirm that this the only way to reset to out of the box, especially on custom kernels or root
You need to flash a full ROM through the new JIG cable not the old JIG. Old JIG won't reset counter
Be aware, most new ROMs here include old SBL and not the original to avoid the old JIG blacklisting
Better use an untouched "one file" ROM from samfirmware or grab your own ROM from Kies temps folder while it updates your phone
I personally like this way:
1- Use Odin through new JIG to flash an old official untouched ROM, 2.2.1 or older
2- Use KIES to originally update to the last official firmware, disable backup phone during this step
3- Hard reset and format internal SD card
Click to expand...
Click to collapse
What do you mean with "JIG-Cable"? I just have that small Jig and it resets the counter...
Am I missing something?
Sent from my GT-I9100 using XDA App
TheSniperFan said:
What do you mean with "JIG-Cable"? I just have that small Jig and it resets the counter...
Am I missing something?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
there is new version of jig where resistors are mounted to cable

[Guide] Revert back to Original Stock Rom With Kies

Hi to all. This is a very simple guide to revert back to the Stock rom that came with your phone.
Odin is not needed, also no special skills needed. All you need is a PC with Samsung Kies installed.
Kies is best to be updated to latest version. latest one is 08-01-2013
So, let's start. If you were rooted and the custom binary counter has increased, please use TriangleAway prior to this guide.
1-) Open up Kies with phone disconnected, but keep it powered up cause you will need it for the serial number.
2-)Navigate here (tools) (picture 1) and select the 3d option (software upgarade and preparation). you will get this Enter GT-N7100 press confirm.
3-) enter your phones serial number(picture 3) wich you can find either under the battery or by navigating to yout phone Settings- About device- Status- Serial
Number. Press confirm. after pressing confirm you will be presented with a dialog which lets you know that the device will be wiped. Press Confirm again.
4-) you will now be presented with the version (picture4, it is for my phone. you will have maybe other) that is the latest for your phone and your serial number. press confirm and wait for the first download (picture5). wait till it finishes.
5-)in the next screen (picture 6) read and select Agree. put your phone in download mode by pressing volume down+ home button+ power on. do not release the buttons till the phone is in the screen that tells about warning. press volume up.
connect phone to PC and press down at Start Update button.
this will take a while to download cause the update is about 1GB.
wait till it finishes and phone boot up.
Set up as usual.
Hope it helps.
Wow, thanks!
I hust have a question about this, for example, if i ever want to rollback to carrier stock ROM, i should follow the steps above? If we do this, are we going to enable OTA carrier updates as long as we don't root the phone, right?
Thanks!
luismedina said:
Wow, thanks!
I hust have a question about this, for example, if i ever want to rollback to carrier stock ROM, i should follow the steps above? If we do this, are we going to enable OTA carrier updates as long as we don't root the phone, right?
Thanks!
Click to expand...
Click to collapse
you are correct. in both questions:laugh:
Do you think this procedure would work with a Note 10.1?
Ive triangled away, so the download screen says its official
But its still rooted, this seems a very simple and effective way to remove all traces of changes
Blackhorse said:
Do you think this procedure would work with a Note 10.1?
Ive triangled away, so the download screen says its official
But its still rooted, this seems a very simple and effective way to remove all traces of changes[/QUO\
it should worl in your tab too. it was the same for S3 and S2.
it is like restore function in Itunes but a bit under disguise :laugh:
Click to expand...
Click to collapse
mariosraptor said:
Blackhorse said:
Do you think this procedure would work with a Note 10.1?
Ive triangled away, so the download screen says its official
But its still rooted, this seems a very simple and effective way to remove all traces of changes[/QUO\
it should worl in your tab too. it was the same for S3 and S2.
it is like restore function in Itunes but a bit under disguise :laugh:
Click to expand...
Click to collapse
Will this work coming from a 4.2.+ CM / AOSP based ROM?
Click to expand...
Click to collapse
It will work coming from any rom. Just backup, backup, backup your personal data. It will wipe internal sd.
Sent from my GT-N7100 using xda premium
mariosraptor said:
It will work coming from any rom. Just backup, backup, backup your personal data. It will wipe internal sd.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Thanks... This is good to know. Question though... I live in Canada and my device was a UK version that I bought from a store here in Edmonton, Alberta. That being said... Will Kies be able to find my proper STOCK firmware given my location or does it find it based soley on the serial number?
It finds it base on serial number. If is is a UK device it will install the latest one for the specific serial number and UK.
Sent from my GT-N7100 using xda premium
Great guide but i still have a question!
Q- Should i flash stock recovery prior to following this procedure? or will KIES do it for me?
sda.171 said:
Great guide but i still have a question!
Q- Should i flash stock recovery prior to following this procedure? or will KIES do it for me?
Click to expand...
Click to collapse
Kies will
Sent from my GT-N7100 using xda app-developers app
anyone on windows 8 having trouble with this? program stops responding after downloading the initial upgrade components (step4)
this might be the final push for me to go back to win 7
sda.171 said:
Great guide but i still have a question!
Q- Should i flash stock recovery prior to following this procedure? or will KIES do it for me?
Click to expand...
Click to collapse
no. Kies will do it.
danfozzy said:
anyone on windows 8 having trouble with this? program stops responding after downloading the initial upgrade components (step4)
this might be the final push for me to go back to win 7
Click to expand...
Click to collapse
Sorry. Not using win8
Sent from my GT-N7100 using xda premium
just a heads up that you cant do this on a mac, the option isn't in the tools menu
What does the serial number look like? I've tried every number on the back of the battery and on the box!!!
It is like S/N: 8BC6738BSH
It is under the imei
Or settings-about phone-status
Sent from my GT-N7100 using xda premium
Would this method work in restorin my UK S3 back to stock please? It was originally a '3' branded phone tho, not sure kies would install that, sorry to sound totally silly, just not familiar..thanks!
Yes it will restore to what it had out of factory.
Sent from my GT-N7100 using xda premium
YOU ARE A LIFE SAVER
Great guide Marios!
Very usefull for everyone, especially some users like me who have never seen kies ui to know about....
So, now i found a reason to use Kies one day....

Can't upgrade from 2.2

[Resolved]
Help, I downgraded from 2.3 to 2.2 for various reasons,but now when I try to upgrade again I just get the pink screen ,if I try using the option from settings/storage,it says key data couldn't be backed up , the installation will stop. Also if I boot into the system it runs fine for about a minute then locks up completely so I can't even continue to use it in 2.2 can anyone advise ?
Sent from my Nexus 7 using XDA Free mobile app
Try to put the 2.3 dload folder to a sd card, then remove the battery, plug in a USB cable to the computer and the phone, volume up+down+power (if I remember right lol). See if it will update that way.
no, that's the usual way I've been flashing it, I can get to the image folder ,but it won't boot into recovery either
Sent from my Nexus 7 using XDA Free mobile app
totsy1972 said:
no, that's the usual way I've been flashing it, I can get to the image folder ,but it won't boot into recovery either
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Odd. Maybe try to flash the ICS pink screen unlocker? I had weird issues at some point too, then I flashed that and the problems went away. Afterwards flash ICS.
Just tried that,still no luck,it doesn't even get to the unpacking screen,it just stays pink. beginning to think its beyond repair
Sent from my Nexus 7 using XDA Free mobile app
totsy1972 said:
Just tried that,still no luck,it doesn't even get to the unpacking screen,it just stays pink. beginning to think its beyond repair
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
I think it's still possible to fix it. I was loosing hopes too, but I messed around with it anyway and got it working. Just try different dload's, different methods and maybe you'll get it running. Maybe other users will have some ideas too.
CrysisLTU said:
I think it's still possible to fix it. I was loosing hopes too, but I messed around with it anyway and got it working. Just try different dload's, different methods and maybe you'll get it running. Maybe other users will have some ideas too.
Click to expand...
Click to collapse
I've been trying all different ways, this is what I get when trying it from storage menu
Sent from my ST15i using XDA Free mobile app
@Moihack maybe you have any ideas? You've written this to me before:
Moihack said:
As long as your phone still gets power and pink/blue screen shows there is nothing to be afraid of yet,since this isn't a hardbrick.
Contact me on hangouts telling me what you have done resulting in the above issue.
I have bricked my u8800pro in every possible way both soft and hard brick (thank god warranty was still active back then).
Click to expand...
Click to collapse
Hi there!
I think when you upgrade from software menu there is an option for data back-up.
Uncheck this option and the error should go away.
Also what do you mean with this: "Also if I boot into the system it runs fine for about a minute then locks up" ?
What do you mean it locks up? Touchscreen is not responsive for example?
My suggestions:
1) Do a factory reset and then check if you can upgrade
2) Try re-installing your recovery(use cwm 5.0.27 by geno for best compatibility) or even replace the whole image folder with the froyo one from here: http://forum.xda-developers.com/showthread.php?t=2146856
Your phone is not beyond repair that's for sure. Since it boots fine.
Moihack said:
Hi there!
I think when you upgrade from software menu there is an option for data back-up.
Uncheck this option and the error should go away.
Also what do you mean with this: "Also if I boot into the system it runs fine for about a minute then locks up" ?
What do you mean it locks up? Touchscreen is not responsive for example?
Click to expand...
Click to collapse
I haven't noticed an option for data backup,will check again later on. And yes when it locks up touch screen becomes unresponsive and none of the buttons respond either. Also when I try to enter recovery ,both custom and stock, it displays the kernel logo then vibrates with a black screen for a second then back to kernel logo and continues to boot.
Sent from my Nexus 7 using XDA Free mobile app
Ok guys,I copied over the stock image folder and now it works ok, however I still can't upgrade from froyo. At least I can use it again though so thanks for your help, its much appreciated. Incidentally, there wasn't an option to back up data when upgrading, but that error has now gone, except it now just reboots instead, so I will just keep trying.
Sent from my U8800Pro using XDA Free mobile app
[Edit] Finally I've managed to upgrade to GB , had to put both step 1 and step 2 in the same dload folder and it worked. So cheers for the tips
You've put all steps in one folder?
DarkSkyGhost said:
You've put all steps in one folder?
Click to expand...
Click to collapse
Steps 1&2 in dload folder ,step 2 renamed to UPDATE_G.APP.
Didn't use step 3 as I was updating to ICS after that
Sent from my Nexus 7 using xda app-developers app

Anyway to root and custom ROM with cs918 plus

Just ordered one of these just wondering if they are rootable and if theres any custom ROM support. Browsed this forum didn't see anything so quessing no but thought I'd ask. Thanks.
Sent from my SGH-M919 using XDA Free mobile app
There are few on other web sites, most command that either remote isnt working or wifi malfunction.
I also just ordered 2days ago, any chance chamge to 3 foot power socket?
Hi,
The device is rooted by default.
Still waiting for custom rom. Seems it will take a time.
Can anyone please provide me with a backup of a stock recovery image to cs918 plus? I have replaced the original one with TWRP and now I cannot update the device with new firmware because I cannot find the stock recovery anywhere.
You can easy make a backup copy of stock recovery with Flashify app then put it into the internet and give me a link so I can download it and flash it into my CS918 plus.
Thanks in advance guys!
Please help
I can't upgrade my firmware either cuz I can't even figure out how to get into recovery, I'll get you a copy of stock recovery when I am home tomorrow.
Sent from my unknown using XDA Free mobile app
To flash a new firmware use that instruction:
To get a new firmware type in google: "csrk3288p 20150609", enter the link location and download the file from the web site.
(Unfortunately I cannot put the exact link because I am a new user)
Then put the unpacked downloaded file into the main directory of your external sd card (/mnt/external_sd/) and change the file name from t031_8723bs_CSQ_splaire_20150609.img on update.img.
Then turn on the device but first hold down the button at the bottom of device and keep holding it until you willl get into recovery or install the "Reboot recovery" app.
Then you can choose "data/factory reset" but you don't have to - be careful that will erase all your apps and data installed but will not erase your external sd card.
Then choose "update rkimage from external storage" to flash new firmware.
PS. To navigate in recovery I'm using external keyboard connected to one of USB ports.
If you will have any troubles just ask.
I would be grateful for the stock recovery image for CS918 PLUS device.
Does anyone know if there even is a Source drop for this device ? What methods are used to flash a new rom/firmware ?
I don't have the device but can look at the code.
Perseus said:
Does anyone know if there even is a Source drop for this device ? What methods are used to flash a new rom/firmware ?
I don't have the device but can look at the code.
Click to expand...
Click to collapse
I don't have the firmware of cs918 plus, but I know how to flash the firmware. I think the procedure is same with cs918 and all rockchip based android tv box.
Using the RKBatch Tool to flash the firmware.
1. Connect to your computer with micro usb cable when device is off
2. Hold reset and power on
3. If one of connected device turn green, browse to the firmware (*.img)
4. Press "Restore" button and wait. Remember "Restore" button, not "Upgrade"
Does anyone can provide me with stock recovery image?
grzesior said:
Does anyone can provide me with stock recovery image?
Click to expand...
Click to collapse
Can't you pull the recovery from the firmware update IMG? I figured out how to update firmware from SD card but used a app called reboot to get into recovery because there's no button on the bottom of my device. That firmware from 0609 called splaire is horrible as is the 2nd newest firmware. I with I had never updated mine it was better before...
I just spent an hour trying to get the recovery for u using flashify, it says it backed it up to SD card but its nowhere to be found on it, it says it backed up to dropbox but the folder it created on Dropbox is empty... Any other way to backup the recovery for u?
Sent from my SGH-M919 using XDA Free mobile app
grzesior said:
Does anyone can provide me with stock recovery image?
Click to expand...
Click to collapse
Here you go bro
https://www.dropbox.com/s/bfbu0d1r5zr5kcr/stockcs918p.img?dl=0
Sent from my SGH-M919 using XDA Free mobile app
Perfect!
Thank you very much. Works well.
grzesior said:
Perfect!
Thank you very much. Works well.
Click to expand...
Click to collapse
Edit: finally got rkbatch to recognise the unit, fixed now.
Glad to help. My unit is completely bricked now it seems. I upgraded to the June 29 firmware and a lot of functions on the remote stopped working so I wanted to downgrade so I tried to reboot to recovery but root was lost with this update.... So I tried the rkbatch method but I could never get the green connected to show up. I gave up after half an hour and plugged it into my TV now I have no signal I can't even get anything to show up on my TV...super stressed out now...
Sent from my SGH-M919 using XDA Free mobile app
The link below:
h[ttttttt]ttp://chinagadgetsreviews.com/download-latest-android-kitkat-4-4-2-stock-firmware-for-cs918-plus-4.html#comment-1036
shows last ROM for that device.
Seems that is the best rom ever made.
Thanks for leaving that up and available mate.. Trevor
ISITBRICKED said:
Here you go bro
https://www.dropbox.com/s/bfbu0d1r5zr5kcr/stockcs918p.img?dl=0
Sent from my SGH-M919 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the file.. So I can rename it to...... Copy to the micro sd card and then restore?
Currently I can only get to the boot to recovery options... ADB options etc etc.
Thanks friend may help me out as well ...

Categories

Resources