Database Users

[Q] Wifi problem after changing ip

I installed MDJ android froyo build 4.3 and everything was working well.
i had to enter ip address for a certain network at work, everything got messed up, so i removed the ip address enteries i made (use static ip) and still needs ip for connecting, i also checked DLNA auto ip and nothing changed!!
keeps trying to connect (giving me obtaining ip address) and disconnects, doesn't want to connect.
i tried reinstalling android again but keeps giving me this damn problem!!!! i think there r some files not deleted
i tried connecting on WM, i found out that it doesn't connect also
what to do for that ****, really annoyed about that!!
TMOUS HD2 on stock Rom 2.10 and radio 2.08, WM 6.5 and recently installed android MDJ 4.3
Thanks in advance

sevoflurane said:
I installed MDJ android froyo build 4.3 and everything was working well.
i had to enter ip address for a certain network at work, everything got messed up, so i removed the ip address enteries i made (use static ip) and still needs ip for connecting, i also checked DLNA auto ip and nothing changed!!
keeps trying to connect (giving me obtaining ip address) and disconnects, doesn't want to connect.
i tried reinstalling android again but keeps giving me this damn problem!!!! i think there r some files not deleted
i tried connecting on WM, i found out that it doesn't connect also
what to do for that ****, really annoyed about that!!
TMOUS HD2 on stock Rom 2.10 and radio 2.08, WM 6.5 and recently installed android MDJ 4.3
Thanks in advance
Click to expand...
Click to collapse
You may need to enter correct APN settings and or change your DNS settings as well. Check my sig and thumbnail for more help.

Solution Wifi Android 2.2 Schlunds

I have no permissions to publish to HD Mini ROM Development, published the solution here.
I have the solution to put wifi in Android 2.2 of Schlunds, the problem is in the process "htcUPCTLoader.exe" not allowed to continue with the process.
The assignment of IP must be static, do not get the IP automatically
Here I leave kernel with the new install
TESTED ONLY WITH ANDROID 2.2 Schlunds
Sorry for my bad English

hey thanks man
maybe u will find a fix for derefas sd card fix too?

Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?

codiak said:
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
Click to expand...
Click to collapse
Or the Windows Mobile rom used?
After trying the Android images, I had a lot of GPS issues under WinMo (not working anymore). At the end it was fixed, but could it be that the WinMo roms can be of influence on Android?

MobileMini said:
Or the Windows Mobile rom used?
After trying the Android images, I had a lot of GPS issues under WinMo (not working anymore). At the end it was fixed, but could it be that the WinMo roms can be of influence on Android?
Click to expand...
Click to collapse
I start to believe is this...i'm gonna use use Stock ROM and i will keep you posted if it will be any changes

nsourm has a dualbootloader in his ROM
Maybe its better to boot Android not from "within" WinMo.
Can someone test that?

codiak said:
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
Click to expand...
Click to collapse
In my case the prob was "htcUPCTLoader.exe" it was not allowing deamon to start..so i had to kill it and then run the run.bat file....
Can u try it this way..??..connecting the Mini with pc..running run.bat...after that killing htcUPCTLoader.exe process in task manager..and then running run.bat file again..??.... it might work....if not..then there's no harm done

I dont need to try. The kernel module file (*.ko) in the image is updated. So the problem (at least for me) is not adb push. must be something different.

Codiak, your not alone. I am also not able to turn WiFi on. Do you get Error when you go to the settings to turn it on? It's like its not picking up the WiFi on the mobile.

The only thing I changed was adding in the run.bat
Code:
taskkill / F / IM htcUPCTLoader.exe
On beginning of everything, to finish the process before starting the adb. I haven't touched anything of the files zImage and adb.exe
http://www.megaupload.com/?d=3NKI5Z0U
This is my system (android 2.2) running Wifi.

Sak_1 said:
I have no permissions to publish to HD Mini ROM Development, published the solution here.
I have the solution to put wifi in Android 2.2 of Schlunds, the problem is in the process "htcUPCTLoader.exe" not allowed to continue with the process.
The assignment of IP must be static, do not get the IP automatically
Here I leave kernel with the new install
TESTED ONLY WITH ANDROID 2.2 Schlunds
Sorry for my bad English
Click to expand...
Click to collapse
Thank you for all you've done! Unfortunately,it didn't work on my mini. (my windows rom is 1.38). Still,thank you!

JAntrobus said:
Codiak, your not alone. I am also not able to turn WiFi on. Do you get Error when you go to the settings to turn it on? It's like its not picking up the WiFi on the mobile.
Click to expand...
Click to collapse
Its the same behavior as the fixed module was not installed.
If you tab Wifi, it just grays out and do nothing. No error message.

See, im on the standard ROM. And no matter what I try, I get the same.

Ok, so it not seem to be WiMo ROM related. I use a custom one.
So my last idea is the bootloader (haret)...

Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.

codiak said:
Ok, so it not seem to be WiMo ROM related. I use a custom one.
So my last idea is the bootloader (haret)...
Click to expand...
Click to collapse
i dont think anyone touched haret after cotulla patched it for mini

seppe82 said:
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
Click to expand...
Click to collapse
It worked, mine no longer displays as error. But I dont have any WiFi's to connect to as im also at work. But it looks much more promising.
Just we need to start looking into getting the battery reconised by Android, having to go into Windows to charge my phone.

seppe82 said:
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
Click to expand...
Click to collapse
Dont work for me My Wifi in WiMo was allready off. I changed it to on and booted Android = no luck. Rebooted to WiMo and disabled Wifi and booted Android again = no luck.
Did you get a error message before while switchig wifi on in android? I do not get a message. it just grays out

codiak said:
Dont work for me My Wifi in WiMo was allready off. I changed it to on and booted Android = no luck. Rebooted to WiMo and disabled Wifi and booted Android again = no luck.
Did you get a error message before while switchig wifi on in android? I do not get a message. it just grays out
Click to expand...
Click to collapse
Unfortunately there wasn't any precise error message. As you said it only was greyed out with "Fehler" (error) written below the wlan switch. It's strange that there still isn't any solution working for everyone.

For me, no "Fehler" came up. Just grayed out. Same behavior like I never applied the patched module. But i can see the patched .ko file in the phone
I´m using tzacapaca patched ext2 file that works for him...

100% working wpa_supplicant for galaxy s2 ad hoc mod for gingerbread 2.3.3 and 2.3.4

hello friends
today i m showing you a 100 percent working wpa_supplicant for galaxy s2 gingerbread rom for ad hoc network. yes it is test by me and also this is modified by me too. no one is responcible and cant take credit for developing it. currently i m using and testing on litening rom 6.1 and it works flawlessly. so no more wait for new wpa supplicant. becoz wait is over now. use it and reply me about ny bugs. i will try to revamp it. bye
download attachment and use it
if u like my work then plz donate me on my paypal account
[email protected]
and plz reply thanks

This is great!!! Tested on my galaxy SGS1 and works perfectly!
Thanks!!!
Edit: i can connect only if i set my ad-hoc network unproteced. If i add wpa2 or even wep security the phone gets stuck on "Obtaining IP address...", but it could be my ubuntu notebook.

Awsome sauce!!! Been waiting for this. Downloading and testing it now on my SG1.
Thanks
edit: just realised it is not a CWM flashable zip. Where do I put this?
edit2: figured out where to put it so dont worry. Cannot obtain IP address though on an unsecured ADHOC network.

what is this ?

It alows your phone to use your laptop/desktops internet connection. Create an ad-hoc wireless network on your laptop/desktop and then search for that network on your phone connect and voila your phone should now use the interent through your laptop/desktop.
I like it cos it means I can use my internet connection at work instead of 3g.

SGS2 on lite'ning v4.2 (2.3.4)
Open: 'obtaining IP' loop
WEP: 'obtaining IP' loop
WPA: [no connection]

it is not cwm file. first u have to unzip it then copy and paste this on system/bin folder on ur rooted gs1 and gs2.but this will work perfectly on gingerbread 2.3.4

hi haymzee
you should use litening rom ver 6.1 not 4.2 otherwise it will not work correctly.so first update ur rom in 6.1 and then use this wpa file ok

OH YES! will test and report; long awaited!

I can connect in the morning but after turn airplane mode on-off, then I can't connect till now.
It shows obtaining IP address, even I try to re-boot both phone. T_T

Hello everyone,
I finally managed to solve the problem of connections
thanks

hi to everybody,
thank you for your work!!!!!!! is perfect!!!!

hi,
i'm running LeoMar75 Revolution 2.6, and this wpa_ did not pass obtainig ip loop.
neither wit unprotected or wep protected adhoc network

guidox79 said:
Hello everyone,
I finally managed to solve the problem of connections
thanks
Click to expand...
Click to collapse
Hello, how did you manage to solve the looping 'Obtaining IP address.." problem ?

Also got the same problem of Obtaining IP address. I tried many configurations of changing the ip address manually with static ip address settings

Its working perfectly on our rom.
10 char will b built in in the next release
For all noobs:
Use root explorer
Unzip and put the file in system/bin
Reboot
Done.
Now test
Sent from my GT-I9100 using XDA App

I use LogMeIn.apk

any solution for GB 2.3.5 ???

I've tried ad hoc on 4 different laptops and it only worked on the newer ones

I can confirm this works 100%. I tethered the internet connection on my Macbook Air with the phone using AdHoc Wifi successfully.

wifi problem...tytung please advice me!!!!

Hi guys...am only geting wifi at home...not workin at my brothers house. it keeps conecting and disconnecting and authenticating..however when i boot the phone from windows the wifi works ok at his house!...i was using tytung v 2.8 gingerbread... i have made a fresh instal using tytung v 3.0 gingerbread but the problem is stil there.....using a htc hd2 running andrtoid from sd card.........please could somebody shed sum light!!!...

control wifi security type of router. wpa is better for android. you may have problems with wep security

...after the phone has scanned for wifi it brings up WPA/WPA2 PSK alongside the network name...after keying in the security password it just wont connect.......keeps connecting and disconnecting......seem to be having the same problem at me mates house aswell!!

shaz999 said:
...after the phone has scanned for wifi it brings up WPA/WPA2 PSK alongside the network name...after keying in the security password it just wont connect.......keeps connecting and disconnecting......seem to be having the same problem at me mates house aswell!!
Click to expand...
Click to collapse
Try a trila and error - disable security on the router completely for a few minutes and see if it stays connected. If it does stay connected without security, download the latest tytung kernel package from his thread, extract the wpa_supplicant from /system/bin and push it to the /system/bin in your android. See if that helps.

ok..thanks for your reply... i will try this out...if it does the trick you will have to advice me on the system bin thing!!!!!.........sorry i am new to android romming...might possibly drop you a email....

hd2 hspl

hi,
so i was wondering do you need hslp (not spl) to run wifi on ics (sd version not nand) because i dont have hspl and wifi works for my gingerbread currently but if i want to change to different sd roms wifi never works
Plz Help!!!

HSPL has nothing to do with SD builds.
It doesn't affect the way your ROM behaves and you don't need it whatsoever. [As long as you're not using NAND]

so do you have any idea why my wifi doesnt work ??

It is probably kernel related, have you (tried to) change it recently?

do you mean acutal roms, them yes i have tried about 5 and non of them work ( i mean wifi )

it would help massively if you explained in what way your wifi doesnt work. i.e does it turn on but not connect? does it appear to connect but no network? It would also help if you described your network a little, i.e wep? wpa? mac filtered? home router? works router? You've confirmed it works under other android sd roms, right? just ICS?
Just saying 'it doesnt work', is like phoning a mechanic and saying 'my car doesn't work, , tell me what's wrong''.

hi,
my wifi network shows up on the wifi settings and if I enter my password it just says = secure with with WPA/WPA2 PSK but it dows not connect. I have wpa2psk network at my rom is MDJ_GingerBread_HD2_v.1.0_RC5_RAM_STOCK( which wifi works). I want to set up IceCreamTostidroid v11.0 normal. Is it the roms fault or mine???
thx for the help

Flashpoint382 said:
hi,
my wifi network shows up on the wifi settings and if I enter my password it just says = secure with with WPA/WPA2 PSK but it dows not connect. I have wpa2psk network at my rom is MDJ_GingerBread_HD2_v.1.0_RC5_RAM_STOCK( which wifi works). I want to set up IceCreamTostidroid v11.0 normal. Is it the roms fault or mine???
thx for the help
Click to expand...
Click to collapse
If you are booting through haret try this,in wm6.5 turn on airplane mode,now boot back to android,try wifi now
Sent from my HD2 using xda premium