Related
I know there are various threads like this one but my situation is a bit different. I tried using odin to clean install 2.2 to then use the custom rom epic experience. I attempted to install 2.2 using odin but it would get stuck in "setup connection" and I would have to quit and try again. Last time I tried my phone got the "phone connection caution computer" icon and to get into recovery I would have to hold the power and camera button, not the volume down button. When I go to try and install things straight from my SD card I would get an error like "status 7" cus I didn't have the sprint apps to install 2.2. I believe I get these errors installing straight from the card cus I rooted my phone, modifying the kernal cus I read somewhere because when trying to update, it tries to verify but can't cus things are missing or edited cus of the root. I can't try to use odin again because my computer can't recognize the phone anymore regardless reinstalling the samsung drivers. SOOOO, I'm basically ****ing stuck for sure I think. The way I access the SD card is by using an adapter. The only way I see this working is if I find a fix using the SD card, but it's looking slim cus of the stupid root.
I don't know much about this yet, as I'm still learning myself. Did you try using another usb port and are you putting the phone in download mode?. Restart the computer and the phone. Make sure odin is running before you plug in the phone as well. And try another usb port. Are you using the cable that came with the phone? That one trends to have problems for some people.
Edit: I don't believe your phone is bricked either, people tend to throw the word around to much because that arnt quite sure about the definition. Just hang in there and the community will help you get back up and running. Good luck
Sent from my shoe, I mean....Epic shoe... I mean Samsung Epic!
mxcoldhit said:
I don't know much about this yet, as I'm still learning myself. Did you try using another usb port and are you putting the phone in download mode?. Restart the computer and the phone. Make sure odin is running before you plug in the phone as well. And try another usb port. Are you using the cable that came with the phone? That one trends to have problems for some people.
Edit: I don't believe your phone is bricked either, people tend to throw the word around to much because that arnt quite sure about the definition. Just hang in there and the community will help you get back up and running. Good luck
Sent from my shoe, I mean....Epic shoe... I mean Samsung Epic!
Click to expand...
Click to collapse
You see, I'm out of options. Last thing I thought of was installing a custom rom 2.1 rom cus 2.2 roms need odin, but I try to install and I get a signature error or whatever. I'm about to throw the phone against the wall, crack the screen, and use my warranty and get a new phone cus I literally tried EVERYTHING. I spent my ****ing 8 hours of my saturday trying to fix this.
Try a different computer my new Dell XPS 9100 will never reconize my Epic, however, my wifes laptop will always reconize it. I know that sounds weird, I always thought I had a poblem with my phone but it ended up being my computer.
Sent from my SPH-D700 using XDA App
cbpagent72 said:
Try a different computer my new Dell XPS 9100 will never reconize my Epic, however, my wifes laptop will always reconize it. I know that sounds weird, I always thought I had a poblem with my phone but it ended up being my computer.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
omfg, I used my mom's lappy and the drivers worked. Meaning I can try and use an odin fix.
Odin can be tricky to use because of a few factors other than itself. 1) if you can, use a deskto pc and attach to a usb port literally on the motherboard, no front or pci, this may work, but this I what I found (reading countless threads) to be the most failsafe for everyone. 2) your sammy usb cable is for charging or non critical data transfer ONLY, as it is garbage... repeatedly proven in the threads. 3) reboot pc and phone, boot phone into download mode, (hold down 1. On physical keyboard and press power... DO NOT CONNECT YET! Start up odin, place files where needed (.pit, etc...) uncheck all but what you're told in the flashing instructions with the file you're flashing, most have awesome detals, but sometimes your little issue is resolved on page 50 of the thread... not in the OP. Ok so now plug in the usb connection, odin should find it. If it doesn't, search for drivers, uninstall, reinstall start over, OR you have a bad connection, refer back to usb port and cable. I have 1 out of 4 mobo usb ports that the drivers will maintain a connection to, so try another. Then, once odin has a connection, make sure you're following the guides to the T (and read all the posts)... after that, odin is your best friend. The problem lies elsewhere... odin is the goods. If you have run into problems maintaining connection, and plan to re-root, read all the one click posts and if it drops connection a lot, enter the commands in one by one, repeat if one fails till it sticks. There are way better guides, but you seem to have run into the same issues I did, and after hours and hours, I got that scary ass reconnect me now screen. Just read the whole threads, and if your problem hasn't already been resolved, post in the appropriate thread, so others may learn from your discoveries!
Don't give up, once you figure out the quirks of the relationship between your pc and phone, and of course meticulously follow instructions, your elation when successful will make you forget that pesky 'bricked' screen... trust me I got it too, and no matter how much everyone says you can't brick these following instructions on here... its still scary till it all works. If things are wonky, wipe, go back to DI18 and start over... or just sit tight for froyo roms... good luck!
Oh, and sorry for no links, but it would seem you've probly already read em all... not sure I can do links...
Maybe its just my eeepc that doesn't like the drivers, good luck! Sounds like you're on the way... oh don't forget with the drivers to let em install on connect, leave it plugged in for like 10 mins, unplug, it will then complain it wasn't done, reconnect, then after that finishes, reboot. Crazy drivers...
At least I got a computer recognizing my phone, so I can try and use odin. I've been trying to use this fix
http://forum.xda-developers.com/showthread.php?p=9755894#post9755894
and so far odin has been stuck at this one step "file analysis..."
Yeah I used that method to no avail, but it was about 3 pasts old at the time, so I figured id try
something more stable. Tried a couple dk17 roms, then went back to 2.1 and am now using syndicate xtreme. Id suggest going back to DI18, then go from there. Let me check for another post of mine, theres a dialer code I had to do too at one point...
Ok when doing one click root, someone suggested ##8778# in the dialer, then keyboard enter, then set UART to pda not modem. This and removing comodo firewall, all the sudden my intermittent connection was solid. Not responsible for what this does, but it worked for me. Never found out what it does..... still curious. So this may help you even in odin, try to flash di18 after doing this, then the all in one rom you're looking at...
Oddly enough, I managed to semi-brick my phone several hours ago - my wireless adapter was on the same USB header, and both the wireless adapter and the phone crapped out while trying to flash with Odin.
Thankfully I was still able to get into download mode, and plugging the phone into a different USB port worked fine.
After some more research, about 10 hours of it, odin finally cooperated with me after I downloaded about every kind of file that could make my phone work and finally got it into 2.1
I first flashed the stock kernal to get it working, then flashed stock 2.1
Now I'm that my phone isn't rooted anymore I tried installing 2.2 through the recovery menu and I still get error status 7. Any ideas?
Probly best to post in the thread for the package/rom you are trying to install... others using it should be able to help... or you can do a 2.1 rom and wait for a final froyo based rom... glad to hear you're not bricked... the only way I've heard you can absolutely do that with these is installing a GSM rom or something crazy like that... but non-functional phone is scary regardless...
ungovernable1977 said:
Probly best to post in the thread for the package/rom you are trying to install... others using it should be able to help... or you can do a 2.1 rom and wait for a final froyo based rom... glad to hear you're not bricked... the only way I've heard you can absolutely do that with these is installing a GSM rom or something crazy like that... but non-functional phone is scary regardless...
Click to expand...
Click to collapse
Alright I completely fixed my phone. After I rooted my phone on 2.1, I then used odin v1.6 to install the froyo .tar file into pda and it worked. I then rooted it again so now I'm back to normal. Honestly, I did so many things I forgot what I did but I now have my phone functional. Thanks for help everyone, I greatly appreciate it!
I spent all day yesterday trying to fix my Epic with no progress and feeling a little sol.
Yesterday I decided I needed a new ROM/kernel because I was averaging only 4hrs of battery life with Supernova and wanted to try Nebula ROM with EXT4. I backed up everything on my laptop and did a Nandroid backup as well. I also have Titanium backup backed up on my pc. I always always back up. I started fresh by flashing to stock and starting over. I rooted with 1 click, flashed DK28, and where I believe I screwed up is I didn´t upgrade to Clockwork 3 (looking back I don´t know wtf I was thinking by proceeding the following way), instead I went to advanced, reboot recovery and ended up rebooting my system into 2.5.1.2. I rebooted my phone and all was good, powered off, 3 fingered and I still had 2.5.1.2 so like a dumbass I figured I was good to go ahead and flash Nebula. LOL so what happened? the Rom installed, I finished like I always do and when I went to boot up my phone I flashed into v2.5.1.0 and thats where my phone stays. If I try to do anything it gives me E: Can´t open/cache/recovery/log
I tried to restore of course and I get this message. I have tried to Odin back to stock but my phone will not connect to a pc.
Heres my situation. I live in a house with 6 computers that I have attempted to connect to with no luck, 5 of these have adb and the Android SDK, several drivers (including the Epics) installed and the C drives have literally no more space. The other pc has Windows 2000 so I wondered if it won´t install the drivers or pick up my phone because its so old??? My main laptop is running Ubuntu and Im not understanding how or even if I can Odin my phone on it, besides I think this laptop won´t connect to my Epic because of the USB port and I dont have a clue how to detect or fix that. My mom has a brand new PC with Windows 7 thats never had anything connected via USB yet that I thought was worth giving a shot at. I only have the stock USB cable though and I was wondering if I bought a new cable if it would be more likely that my phone would connect.
I am not very educated on Android or computers so I prob shouldn´t have done as much flashing as I have to begin with. If I understood file systems better I would prob figure it out.
Thanks for any help or advice. If I over looked the answer in front of my face I am sorry it is because I am retarded and don´t understand computer lingo.
Are you connecting the proper way to odin?
Step 1: open odin with phone Disconnected from PC (if you dont open it first it may not recognize your phone, so i hear)
Step 2: hold 1 on keypad and power on phone --> download mode
step 3: connect phone to PC
step 4: Flash rom
if odin still isnt recognized I would suggest taking out your microsd card and put it in another phone or a microsd card reader and put a basic dk28 rom/dl18 (maybe the acs one that includes modem) rom on there then put the sdcard back in your phone and flash that in clockworkmod and see if it'll boot (wide data/cache/dalvik before doing this)
Also search the forum i'm pretty sure theres an RFS formatter somewhere that'll format your /system/data/cache back to RFS, you probably need to do that before flashing back the other rom...
So, if I understand the OP correctly, you accidentally flashed an ext4 only rom on rfs with 2.5.1.0?
This thread had a flashable reRFS conversion, just in case you need it.
This thread has a cwm flashable di18 and modem.
Those should get you up and going again with cwm 2.5.1.0. If they don't, Odin is really the answer and I don't know what to tell you.
So I tried both of your ideas and I am so pist off. I am now stuck in download mode and cant get 7 freaken computers (one literally brand new with Windows 7, one with Vista, one with XP, 3 with Linux, 1 with 2000 out of being desperate with 5 different usb cords to connect. Clearly my phone is the problem because the sd reader can read my sd just fine and my mom, sister and gramps connect o the same computers just fine. Ive accepted that I am ****ed at this point. I have never got this phone to stay connected to a pc and I think I hate it.
It is starting to sound like it is time to head to a sprint store.
Erica8123 said:
I am now stuck in download mode and cant get 7 freaken computers (one literally brand new with Windows 7, one with Vista, one with XP, 3 with Linux, 1 with 2000 out of being desperate with 5 different usb cords to connect.
Click to expand...
Click to collapse
Have you tried to just pull the battery out? Then, put it back in the phone and boot into CWM? Or pull the battery, then boot into recovery? I personally hate going to the Sprint store and I try every possible option before going.
If you can get another USB cable it will probably work. I use an evo cable. Also for future reference there are no custom kernels on dk28.
Sent from my Evo Killer!!!
Hey, I just wanted to update.
I had tried several usb cables to connect btw including a new one I just bought. No luck. I had tried literally everything to fix my Epic and I was super pist during my last post lol. I finally had to cave and take the block walk (literally) down to Sprint and thank God I insured my phone. He was hella cool about it, just laughed and said he doesn't want to bother with it and replaced it. I am still trying to decide what I wanna do as rooting goes (besides getting rid of pretty much every app they put on there).
Thanks again everyone
I'm sure there is another post about this but I don't know where it is, have looked, a little, but, just want my specifi ? answered. So, have Epic and went to flash from CWM2.5 to 3. Followed all instructions and 1st time didn't flash right, so, reflashed, again, sidenote, I followed all instructions correctly. Anyways, seemed like everything was fine until it rebooted after switching all to Ex4 and from that point only Samung bootup screen appears and nothing else. In addition, have been unable to do 3 finger startup since the reboot. Help, esn swapped to my POS Hero that's slower than slow until I get some advice. Thanks.
S-
I did the samething when I installed cwm 3. U gotta take ur microsd card out and insert it into a computer using an adapter. From there dl a rom of your choice, place it on the sd card, and then flash with cwm.
smathias503 said:
I'm sure there is another post about this but I don't know where it is, have looked, a little, but, just want my specifi ? answered. So, have Epic and went to flash from CWM2.5 to 3. Followed all instructions and 1st time didn't flash right, so, reflashed, again, sidenote, I followed all instructions correctly. Anyways, seemed like everything was fine until it rebooted after switching all to Ex4 and from that point only Samung bootup screen appears and nothing else. In addition, have been unable to do 3 finger startup since the reboot. Help, esn swapped to my POS Hero that's slower than slow until I get some advice. Thanks.
S-
Click to expand...
Click to collapse
Yeah, it sounds like the rom flash after the ext4 upgrade didn't "take". Try what the previous poster suggested and if that doesn't help, look up the Odin posts on this forum. Even if you can't "3-finger" into some form of recovery - as long as you can put the phone into download mode (holding down the "1" key while you power the phone on), you can use odin with 99% success.
If you have any questions, feel free to PM me and maybe I can try to walk you through it without you getting bashed on here! LOL
cjobanion said:
Yeah, it sounds like the rom flash after the ext4 upgrade didn't "take". Try what the previous poster suggested and if that doesn't help, look up the Odin posts on this forum. Even if you can't "3-finger" into some form of recovery - as long as you can put the phone into download mode (holding down the "1" key while you power the phone on), you can use odin with 99% success.
If you have any questions, feel free to PM me and maybe I can try to walk you through it without you getting bashed on here! LOL
Click to expand...
Click to collapse
He doesn't need odin. The CWM3 flash he did was successful. He just needed to flash an ext4 ROM to get past the Samsung Boot screen.
mattallica76 said:
He doesn't need odin. The CWM3 flash he did was successful. He just needed to flash an ext4 ROM to get past the Samsung Boot screen.
Click to expand...
Click to collapse
That's my thought as well. What rom is the OP trying to use? Is it ext4 compatible? Using a rom that isn't compatible with your file system is one way to get stuck at the Samsung screen.
Although, if ext4 didn't "take" or was partially completed, it could result in something like this. Reflashing with cwm3 might fix this if it notices a problem and tries to redo the conversion.
If flashing a good ext4 compatible rom doesn't fix it, then using Odin and starting over quickly becomes the best option. Though there is a reRFS dk28 rom that the OP could try to flash from his current situation.
Ok flashed Midnight Standard and goes straight to CWM3 startup screen & that's it. So, am I gonna have to do the whole Odin thing? I really hope not. Oh, and fyi I'm a SHE not a HE, lol!
Sent from my HERO200 using XDA App
There's a girl on our website! OMG!
Look for the reRFS dk28 rom. It will try to reformat your phone back to rfs. Then try again. Or just go ahead and jump straight to Odin. Some people seem have a hard time with Odin, but it really isn't that hard.
Ok, thanks for the input. Screw it, just going to do Odin and not mess around anymore. Not having a phone the last day in a half is driving me nuts! Can you point me to a link that has all the stuff I need to do this. I've surfed a couple links and some lead to dead link for Odin. Besides, I want to make sure I've got all the right "ish" to do this. Thanks, so much!
S-
I notices a few users have mentioned that they're dealing with trying to restore or unbrick their Continuum after flashing incompatible kernels and other problems.
I made this backup immediately after I got root, before I did anything else, to make absolutely sure I wouldn't be SOL if anything went awry. I've made absolutely certain this works, by unzipping and flashing on my own Continuum prior to uploading. It contains the system, recovery, and kernel partitions.
This file is also helpful if you need to get back to stock for warranty purposes, in which case you can manually un-root by using your favorite file explorer (I happen to prefer ES File Explorer), grant root permissions, mount system as rw, then manually delete SuperUser from /system/apps, su from /system/bin, and busybox from /systen/xbin. I hope this helps some of you who have been stuck.
You don't need to be rooted to flash this. Simply unzip, flash the .tar.md5, and you're golden. If you end up in restore mode after flashing, you probably need to do a hard reset, but this is unlikely as I tested it by flashing this a few times after installing various programs from the Market and never had to do a hard reset.
Don't forget to put your phone in Download mode by removing the battery, then holding the vol down button while inserting the usb cable. Good luck!
http://www.mediafire.com/?a897dbakz4j7k4f
Thanks for this. I had been messing around with the phone. I was able to get it back to stock.
Kay I try to flash this and it's telling me it's an invalid image type
Never mind, I got it. Thanks
Not a problem, glad I could help!
My phone was soft-bricked. This worked like a charm. Thank you so much!
I ran this and everything passed then when i boot up the phone with animations and sound after the animated verizonwireless logo is up for a while; everything goes black.
any suggestions? never mind I had to do a wipe then it worked
kingtuk1 said:
I ran this and everything passed then when i boot up the phone with animations and sound after the animated verizonwireless logo is up for a while; everything goes black.
any suggestions? never mind I had to do a wipe then it worked
Click to expand...
Click to collapse
Yup, gotta wipe! At first it's so easy to forget this step. When you get to customizing your installation, you'll get to used to having to wipe it'll become second nature!
I'm so glad to hear this is coming in handy for you all! Now that you got this done, get yourself froyo, courtesy of imnuts: http://forum.xda-developers.com/showthread.php?t=1197415
Ok after having installed EC03 Froyo via imnuts's thread. Everything was going fine except for some bugs here and there. Fast forward a couple weeks later and I try to fix those bugs by installing a stock odin rom via torque's thread (seems so foolish now that I look back on it). Which brings me to today and my bricked Continuum.
Well to explain further I tried to install the odin Rom only to receive a FAIL in the end (Selected the md5 file through the PDA option and proceeded to flash). Disconnected afterwards only to find out I can't even get the Samsung logo to show up or the phone to charge, but the phone will still go into download mode.
And this leads me to this thread with the same outcome. I've tried flashing this eclair? image only to end up with the fail message again. After the recovery.bin stage it just says "Complete(write) operation failed." Any help with this matter would be appreciated.
Edit: After some searching, gonna try it with imnuts' DL17 image. Will post results.
Edit2: No luck with that either. Guess I'll just wait until the Bionic gets released, but for now I'll have to dig up my dumbphone.
Native89 said:
Ok after having installed EC03 Froyo via imnuts's thread. Everything was going fine except for some bugs here and there. Fast forward a couple weeks later and I try to fix those bugs by installing a stock odin rom via torque's thread (seems so foolish now that I look back on it). Which brings me to today and my bricked Continuum.
Well to explain further I tried to install the odin Rom only to receive a FAIL in the end (Selected the md5 file through the PDA option and proceeded to flash). Disconnected afterwards only to find out I can't even get the Samsung logo to show up or the phone to charge, but the phone will still go into download mode.
And this leads me to this thread with the same outcome. I've tried flashing this eclair? image only to end up with the fail message again. After the recovery.bin stage it just says "Complete(write) operation failed." Any help with this matter would be appreciated.
Edit: After some searching, gonna try it with imnuts' DL17 image. Will post results.
Edit2: No luck with that either. Guess I'll just wait until the Bionic gets released, but for now I'll have to dig up my dumbphone.
Click to expand...
Click to collapse
Read the OP from pastorbennett here: http://forum.xda-developers.com/showthread.php?t=1203597 and try the unbrick process. You can do a search for pastorbennett and trailblazer. Both have posted "recovery processes", or at least links to others that have posted recovery processes. They've saved my butt a couple of times... Except on my first phone that wouldn't go into DL or Recovery Mode. It would just flash the Samsung logo, over, and over, and over again... That happened before pastorbennett posted the unbrick info. Oh well, Verizon replaced it under the hardware warranty. Thankfully.
Looks like I didn't search hard enough.
Thanks for the link Moon. I will be trying this ASAP.
Hit a little bit of a snag trying to get it to work. It told me to install drivers for my device, however my Phone does not show up in the dropbox and the only related thing I can find is "Gadget Serial".
I've tried uninstalling the drivers, but Win7 is being a fool and automatically installing drivers for me.
Does anyone know why i get a 'FAILED' after trying to flash this with Odin? My phone is soft-bricked btw.
Native89 said:
Looks like I didn't search hard enough.
Thanks for the link Moon. I will be trying this ASAP.
Hit a little bit of a snag trying to get it to work. It told me to install drivers for my device, however my Phone does not show up in the dropbox and the only related thing I can find is "Gadget Serial".
I've tried uninstalling the drivers, but Win7 is being a fool and automatically installing drivers for me.
Click to expand...
Click to collapse
Okay, if you can, grab a different computer (either Windows XP or Windows 7) and install the samsung drivers from this post: http://forum.xda-developers.com/show....php?t=1203597. The hint here with ANY Windows computer is to install the device drivers FIRST! (I've been a system administrator for about 20 years.) Then plug in the hardware. It usually makes the installations go MUCH smoother.
If you have to use your computer, try installing the Samsung drivers first, then plug the phone in.
zzir said:
Does anyone know why i get a 'FAILED' after trying to flash this with Odin? My phone is soft-bricked btw.
Click to expand...
Click to collapse
The key to odin seems to be this:
1. Start odin.
2. Click the PDA button and select the odin TAR or MD5 file. (You can only do one. Not both.)
3. Make sure the phone is not plugged into the computer.
4. Make doubly sure the phone is not plugged into the computer.
5. Put your phone into download mode. (With the phone off, hold the Volume Down button and turn the phone on.)
6. Then plug the phone into the computer.
7. Start the odin flash and you should be good to go. Also, before unplugging the phone, make sure it says either success or failed. If it doesn't say anything, or says loading (or something like that), WALK AWAY! Go get yourself a cup of coffee, a soda, a nice cup of tea... Something. I recommend waiting at least 10 minutes. If the progress bar has not moved, in that time, okay, then pull the cable and the battery and start again.
I tried to do this, but when it boots into recovery mode, it says update.zip is gone. Any ideas why this might be happening? Also if it's like this, will Verizon take it back within the 14 day return policy without charging me anything?
Tarheel487 said:
I tried to do this, but when it boots into recovery mode, it says update.zip is gone. Any ideas why this might be happening? Also if it's like this, will Verizon take it back within the 14 day return policy without charging me anything?
Click to expand...
Click to collapse
Did you flash the CWM Recovery in Odin? (cwm_recovery_test4_adryn.tar) Can be found here if not http://forum.xda-developers.com/showthread.php?t=1230072
is it possible to flash this with heimdall or only odin?
ntien said:
is it possible to flash this with heimdall or only odin?
Click to expand...
Click to collapse
I don't know, however, pastorbennett posted this http://forum.xda-developers.com/showpost.php?p=16600453&postcount=29. It might help? I use Linux at home to build most of this stuff, then use my wife's Windoze machine to flash. It just seemed easier.
Yes, you can use heimdall, you just need to extract this .tar and put the extracted files in the corresponding location in heimdall xD
Sent from my SCH-I400 using xda premium
yeah i saw that but in heimdall 1.3 the UI is different. i don't know where to put any of the stuff. i have the .tar but i dont know where to put the other stuff. here's a screenshot
I don't think I've bricked my phone, I hope you can help me. Done some reading here, but still a big time noob! Trying to flash back to stock for the Verizon upgrade, my phone is stuck on the screen with a gold triangle and a exclamation point in the center of a cell Phone and a computer. I found a thread with a similar problem. I can't seem to have a successful flash in odin. I keep getting a fail when i flash the test file. I would be content if I could just get the phone to boot and have my Miunia Rom working again. Someone please help.
Al bergie man1 said:
I don't think I've bricked my phone, I hope you can help me. Done some reading here, but still a big time noob! Trying to flash back to stock for the Verizon upgrade, my phone is stuck on the screen with a gold triangle and a exclamation point in the center of a cell Phone and a computer. I found a thread with a similar problem. I can't seem to have a successful flash in odin. I keep getting a fail when i flash the test file. I would be content if I could just get the phone to boot and have my Miunia Rom working again. Someone please help.
Click to expand...
Click to collapse
That means you have no kernel our rom in the phone. Not sure what this "test file" you are trying to flash is, but I'm not surprised its failing. Flashing dl 17 should work. If not, flash the ec07 leak, with the proper pit file, repartition unchecked. Then flash dl17.
Dished out by my dumb digits
now it's worse, I hit the dark abyss
So, I flashed(with odin) the clean Eco7 stock with with the correct pit file. It seemed to be doing fine, it got all the way to recov.bin but then I froze there for about an hour. At this point i didn't think it was going to pass anyway so i unplugged the phone and stopped the program(oops?). Now my phone is even worse, it seems lifeless. The phone won't even go to down load mode. I found on another post where someone else was also getting nothing, no power just blackness, and I followed those directions. Still a black screen. It seems more grim than ever! One thing I have noticed that while attempting to flash, a few times my computer completely rebooted. Out of know where! This has happened about 5 or 6 times. I'm just about ready to turn on my old flip phone but I just don't want to give up yet! Any more suggestions?!
Oops, is right. You may have hard bricked yourself. I've tried helping people out of this one before, with no sucess. That is the reason I told you to make sure repartition was unchecked. You can try to power on, and issue an adb command, if you have it installed. But, I doubt it will work. The reason you don't have download, at this point, is because you don't have a secondary bootloader on your phone, anymore. It turns into a catch 22. Download mode is supposedly hard written on the chip. So, you could use a jig to force it into download mode. I'd say that that is your best bet, at this point.
did uncheck repartition
I did uncheck repartition but obviously with no avail. I Will try the"jig" but I don't know anything about it. Is this a file I can download or what?
No matter what happens, thanks soooo much for the efforts to help me!!! Especially wolf??
No. A jig is a piece of hardware. Do a youtube search for 'download mode jig' and you''' get some good hits. You'd have to construct it, or get ahold of some of the devs that have. I don't recall the name, but one dev made one for the Fascinate. I'd imagine it would work for our phone too.
If anyone can remember who it is (I want to say Adam Outler, but I might be wrong) pipe up.