I've compiled and installed a modded kernel. I'm trying to figure out how to load AOSP compiled binaries. I've tried using adb flash_image system /sdcard/system.img, but I get "failed with error: 6." Does anyone know what this means or how to load system.img on a Galaxy Tab from VZW? I'm working on reactivating the phone dialer...
the galaxy tab has nothing like fastboot, so its pretty hard to flash it! but u can try to overwrite a stock factory.rfs with the files from ur system.img and flash via odin!
That sounds like a great idea. However, I'm trying to figure out how to put the vendor specific drivers in the system.img, which is mountable and editable. If I could get my hands on an original stock system.img, that'd be awesome.
Sent from my SCH-I800 using XDA App
As far as I know, the Tab doesn't use mtd file system, so I don't think it uses .img extensions.
Not positive though. Somebody correct me if I'm wrong.
I know for a fact that img files are created as the output of an Android system build. This img can be broken apart with standard Linux tools. I've already done this. I've also mounted factoryfs.rfs to a local directory, which allows me to move apps to and from the file system.
Sent from my SCH-I800 using XDA App
If you have a md5 of it too, you should be able to flash it via an advanced restore in CWM recovery. That is if it is only the data that is flashed to /system. otherwise I would suggest converting it to a .fs or .tar and flash via heimdall or Odin (respectively).
What PC tools can I use to open .img files in a nandroid/CWM backup set?
Must I set up an Android ROM cooking kitchen using Virtual Box + Ubuntu, or is there another way?
zyborg said:
What PC tools can I use to open .img files in a nandroid/CWM backup set?
Must I set up an Android ROM cooking kitchen using Virtual Box + Ubuntu, or is there another way?
Click to expand...
Click to collapse
use the attached unyaffs.exe to extract a system.img! simply drag the created system.img onto unyaffs.exe and it will extract alle the files in the same directory!
to rebuild, i think it might be able to create a image file in magic disk maker but im not sure
zyborg said:
What PC tools can I use to open .img files in a nandroid/CWM backup set?
Must I set up an Android ROM cooking kitchen using Virtual Box + Ubuntu, or is there another way?
Click to expand...
Click to collapse
http://android-dls.com/wiki/index.p...cking.2C_Editing.2C_and_Re-Packing_the_images
Landroid said:
use the attached unyaffs.exe to extract a system.img! simply drag the created system.img onto unyaffs.exe and it will extract alle the files in the same directory!
to rebuild, i think it might be able to create a image file in magic disk maker but im not sure
Click to expand...
Click to collapse
thanks! this was very easy to use
Related
I have seen this asked a few times recently so I figured I would try to put together a quick and easy guide to extracting files from Nandroid backups. This guide only covers Windows, I assume if you are running Linux you can download unyaffs and compile/run it without my assistance. If you are adventurous you can install cygwin and compile unyaffs on your own (or download it at any number of sites across the internet), however I have included all the files needed to extract the files from the img files.
1. Download unyaffs along with the cygwin1.dll
2. Extract the files to a new folder.
3. Copy the system.img file from the ROM or your Nandroid backup to the folder you extracted unyaffs.exe and cygwin1.dll to.
4. Open a command prompt and cd to the folder containing the three files. If you are on Windows 7 you can just navigate there with Windows Explorer and in the URL bar type cmd to open a comman prompt in that location.
5. Type unyaffs system.img
You have now extracted all the files from the system partition of your Nandroid backup. The APKs are in the /app folder and some apps require library files that can be found in the /lib folder. For example: Swype.apk requires that libSwypeCore.so be in the lib folder for it to work properly.
I get an "end of image" message and no folder is created with the extracted files.
I am trying to recover some photos from my Gallery, which I presume is in data.img - but no matter what I try to extract, I get "end of image"
any ideas?
Is the system.img the only thing you can open with this or can you open the data.img or the wimax.img also?
Lock-N-Load said:
I get an "end of image" message and no folder is created with the extracted files.
I am trying to recover some photos from my Gallery, which I presume is in data.img - but no matter what I try to extract, I get "end of image"
any ideas?
Click to expand...
Click to collapse
Your photos should be on your MicroSD card, not on one of the system partitions. Look in SDCARD:\DCIM\100ANDRO, your photos should be there.
cruise350 said:
Is the system.img the only thing you can open with this or can you open the data.img or the wimax.img also?
Click to expand...
Click to collapse
I want to know this also
Seems to work ok for me for data.img and system.img, but not wimax.img or boot.img.
Yep, I tried that too...worked.
Is there a command to repack the system or data image after you have unpacked and played around with them???
I am pretty sure that my issue is within the data file...I removed what I think caused the problem but how do I repack it all to put it on the sd card and try it out?
thanks
Does anyone know a command to repack the files???
Worked for me.
Pretty much my whole family has Evo's. theyre all rooted too thanks to me but in my experimenting, i lost the 4G keys to mines. so i troubleshooted. i put Amen Ra's recovery on my brothers phone, and nandroid'ed only the wimax. put the entire folder for that backup on my sdcard on the spot where u would find ur backups, ran Amen Ra on my Evo. and bam. working 4G. u just cant use them at the sametime cuz it interfears.
Oh ok cool.
Is there anyway to pack the files on windows
I want to see if my phone will boot now that I got rid of some programs I believe to be causing it to bootloop
Stupid question. Don't mind me.
Awesome this works Thanks allot
how can I extract /data/system to then package back as either
* SBF
or
* update.zip
to write to another identical phone?
re
http://forum.xda-developers.com/showthread.php?p=17217163#post17217163
ubuntu fyi
I've extracted *.smg files from a SBF Rom File. I'm willing to extract Stock Apk's from it.
Now, my Unyaffs is in the same folder of the SMG files such as cygwin1.dll, however when i try to execute "unyaffs cg39.smg" I receive the following:
8 [main] unyaffs 5960 handle_exceptions: Exception: STATUS_ACCESS_VIOLATIO
N
2790 [main] unyaffs 5960 open_stackdumpfile: Dumping stack trace to unyaffs.e
xe.stackdump
the log says:
Exception: STATUS_ACCESS_VIOLATION at eip=004010B0
eax=444E1A20 ebx=0000001A ecx=FFFFFFE4 edx=00801322 esi=0040130E edi=610E21A0
ebp=0022EE88 esp=0022EE50 program=C:\Motorola\unaffys\teste-extracted\unyaffs.exe, pid 4708, thread main
cs=001B ds=0023 es=0023 fs=003B gs=0000 ss=0023
Stack trace:
Frame Function Args
0022EE88 004010B0 (0022EEE9, 00000000, 00000000, 00401333)
0022EEB8 004013AF (00000002, 00800180, 00800090, 610A5E22)
0022EFA8 61004DD2 (0022EFC0, FFFFFFFF, 77A651CE, 00000000)
0022FF58 6100594F (00000000, 00000000, 00000000, 00000000)
End of stack trace
I've tried to regsrv32 the DLL and also receveid error as a invalid Dll. Does anyone have an idea?
I'm looking for stock Phone, Contacts and the keyboard apk, by the way, anyone knows the keyboard apk file?
thanks
Thanks
Sent from my PC36100 using Tapatalk 2
hi guys,exist a new link for this tool or another tool for open .img files?
thanks in advance
I've been working on a custom rom with android kitchen and I want to get the system.img and boot.img.But the system.img seems to be extracted and the boot.img isn't.How do I get the system.img?Can I make .img file with power archiver or something?
fdespotovski said:
I've been working on a custom rom with android kitchen and I want to get the system.img and boot.img.But the system.img seems to be extracted and the boot.img isn't.How do I get the system.img?Can I make .img file with power archiver or something?
Click to expand...
Click to collapse
If your PC using linux system,I recommend you to use Virtual Box.
If U using windows system,you must configuration Java environment first,and then install a software who name is Cygwin,You can use it to extract the system.img and boot.img.
I'm a new developer and have applied all my tweaks and edits via root explorer so far. is there a way to change a CWM backup into a flashable rom file for other users to flash? I searched around a bit, but couldn't seem to find anything about it.
Goto this thread here
follow all the setup to install cygwin & kitchen
once it's all setup you can plug your phone in and create a rom
follow the guide (second method) for creating the rom system files by extracting the system folders from your phone (rom you are using)
you can then turn it into a flashable rom zip
I think you just basically extract the CWM backup, then repackage them in 1 zip file (except for the androidsecure backup).
9steele9 said:
I'm a new developer and have applied all my tweaks and edits via root explorer so far. is there a way to change a CWM backup into a flashable rom file for other users to flash? I searched around a bit, but couldn't seem to find anything about it.
Click to expand...
Click to collapse
YOU CAN USE THE CWM BACKUP IN KITCHEN YO MAKE A CUSTOM ROM.BUT YOU CAN'T ABLE TO USE THE BACKUP FILE DIRECTLY AS A CUSTOM ROM.
OTHER HAND YOU CAN MAKE ALSO THIS BACKUP AS A DEODEXED STOCK ROM BY DEODEXING THIS BACKUP FILES.
YOU CAN FIND KICHEN GUIDE HERE-http://forum.xda-developers.com/showthread.php?t=1801690
YOU CAN FIND DEODEXING GUIDE HERE-http://forum.xda-developers.com/showthread.php?t=2230337
PRESS THANKS IF I HAVE A BIT SUCCESS TO HELPING YOU.....:thumbsup:
Hmm thats how i make roms that i dont post here though....
In tthe cwm backup u have system.rfs.tar
Extract it using 7zip
U get system.img or u might get a system folder....
Extract the img file using Magic Iso
Open magic iso
In menu..
File>open
Select ur system.img
On the left side pane right click on the disk icon and click extract.select ur destination
Once the files are all extracted copy all of them in a folder named "system"
Now get a meta-inf folder from a custom rom and zip
Meta-Inf and system folder together
U have ur rom...
Ill create a video tutorial for this tomorrow as many people ask this question in different threads of devices....
Sent from my GT-S5360 using xda app-developers app
I tried to pull the system files from the stock system.img thru Dsixda kitchen....it said no system files found. Sgs2 popped up, but there was no files.
I did this to pull system files from tmobile stock firmware. So im not too sure of why it didnt pull the files.
I did use 7zip to "unzip" the tar file. Selected system.img and put it in the kitchen....selected "set up working folder"...then I got no system files found.
Am I missing something?
Sent from a Insane S4
alloycowboy said:
I tried to pull the system files from the stock system.img thru Dsixda kitchen....it said no system files found. Sgs2 popped up, but there was no files.
I did this to pull system files from tmobile stock firmware. So im not too sure of why it didnt pull the files.
I did use 7zip to "unzip" the tar file. Selected system.img and put it in the kitchen....selected "set up working folder"...then I got no system files found.
Am I missing something?
Sent from a Insane S4
Click to expand...
Click to collapse
try updated kitchen
regards
Solved
Im on current version
Sent from a Insane S4
Why don't you connect your phone in debug mode and shift right click in your working folder and : adb pull /system/
Or are you working from files only? If so you can run your Linux commands from kitchen?
Sent from my GT-I9505G using Tapatalk 2
Make it an ext4 then add a boot.img and a cache or data partition. Then try to set up the working folder
Sent from my cm_tenderloin using xda app-developers app
This question is not specific to the G2 however since it's the device I currently own I figured I might as well ask it here since it seems as good as place as any to ask. That being said I would like to know how I can explore the contents of a TWRP created nandroid backup from my PC running Windows 7 professional. I have already transferred the files to my computer without issue, but when I try to extract the "data.ext4.win000" or "data.ext4.win001" files using 7Zip it just says the files are not supported so I am not sure what piece of software I need to get to open these files and explore their contents from within Windows and any help would be greatly appreciated.
TIA,
MTCellph
You need a specific program to view the files inside, as soon as I check the one I use on my laptop I'll let you know
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
---------- Post added at 11:34 AM ---------- Previous post was at 10:49 AM ----------
Ok so here's what you want to do rename the file to data.est4.tar.gz and you will be able to explore the archive using 7zip
Sent from my LG-D800 running stock kk, rooted with philz using XDA app
I did that and there was a Tar file inside of the tar.gz file which I tried extracted to my desktop and tried to open in 7zip, but it would not open so I am at the same spot I was in to begin with
mtcellph said:
I did that and there was a Tar file inside of the tar.gz file which I tried extracted to my desktop and tried to open in 7zip, but it would not open so I am at the same spot I was in to begin with
Click to expand...
Click to collapse
for some reason that keeps happening with the data folder but you can easily view the system
XxZombiePikachu said:
for some reason that keeps happening with the data folder but you can easily view the system
Click to expand...
Click to collapse
Thanks again for the reply. I was trying to view the DATA folder as you may have guessed which as you found out does not work (or atleast I could not get it to work for me) on Windows so I had to boot up into my Ubuntu partition on my machine and concatenate the 2 .WIN files into one file using the following command from the Ubuntu terminal.
cat data.ext4.win000 data.ext4.win001 > data.tar (or tar.gz if compression was enabled when you created the backups in TWRP)
I then used the built in archive manager in Ubuntu and was able to browse the DATA partition and extract the information that I needed. This should not be necessary, but as we both discovered, windows (for whatever reason) does not seem to be able to handle the DATA partition while Ubuntu can so if anyone stumbles upon this post wanting to know the same information then you should try downloading a live cd / live usb version of Ubuntu (if you don't already have it installed on your machine that is) and running it and follow the steps above to access the files in your DATA partition.
Note: In the above example I had to combine the 2 data.ext4.win* files into one file before I could access the archive. If you do not have multiple data.ext4.win* files then you can skip that step and go straight to the next step which is opening the data partition in the built in archive manager that comes with Ubuntu.
HTH,
MTCellph
mtcellph said:
Thanks again for the reply. I was trying to view the DATA folder as you may have guessed which as you found out does not work (or atleast I could not get it to work for me) on Windows so I had to boot up into my Ubuntu partition on my machine and concatenate the 2 .WIN files into one file using the following command from the Ubuntu terminal.
cat data.ext4.win000 data.ext4.win001 > data.tar (or tar.gz if compression was enabled when you created the backups in TWRP)
I then used the built in archive manager in Ubuntu and was able to browse the DATA partition and extract the information that I needed. This should not be necessary, but as we both discovered, windows (for whatever reason) does not seem to be able to handle the DATA partition while Ubuntu can so if anyone stumbles upon this post wanting to know the same information then you should try downloading a live cd / live usb version of Ubuntu (if you don't already have it installed on your machine that is) and running it and follow the steps above to access the files in your DATA partition.
HTH,
MTCellph
Click to expand...
Click to collapse
great I already run Ubuntu on a virtual machine so this is very useful information
explore/extract system.ext4 with IZArc
Sorry - please ignore this post - I don't know what I'm talking about sometimes...
I know the thread is over 6mon old, sorry...
I have a recent backup from TWRP 2.7.x and really need to figure out how to get into /data/media or whatever the equivalent is in the archive. I did a 'cat' of my 4 data.ext4.win00* files and opened that in Ubuntu. All it contained was a big stack of APKs and a subfolder with a bunch of 0 byte objects. What bugs me the most is that the file browser reports the data.ext4.tar.gz I created at 3.3GB, but the ubuntu handler only reports the /data folder inside at 1.6GB.
I lost a buttload of data and files to an Odin restore necessitated to wipe 2 stubborn cache files. Nothing I tried could change their properties (thanks G00gle). Anyway, I ended up doing a full wipe of the phone thinking I had a good TWeRP backup on the extSDcard. Wrong.
I just checked system.etx4.win* and found the same/similar files under it's /app folder.
Have I lost all those files or is there something else I can try? TIA.
Talos4 said:
explore/extract system.ext4 with IZArc
Click to expand...
Click to collapse
Thanks a lot for this hint! I hadn't heard about IZArc before. It's really great and saved my day. :highfive:
Windows users
For windows (if you have multiple files) :
Code:
copy /B data.ext4.win001 + data.ext4.win001 + data.ext4.win001 + data.ext4.win001 output.tar
Mehdiway said:
For windows (if you have multiple files) :
Code:
copy /B data.ext4.win001 + data.ext4.win001 + data.ext4.win001 + data.ext4.win001 output.tar
Click to expand...
Click to collapse
Thanks to this, I was having a bad time viewing each of the data.ext4.win000 etc. etc. can't handle by windows I think. Looking for solution from google and I end up here. Thank you my friend. :good:
zidane02 said:
Thanks to this, I was having a bad time viewing each of the data.ext4.win000 etc. etc. can't handle by windows I think. Looking for solution from google and I end up here. Thank you my friend. :good:
Click to expand...
Click to collapse
if you want to explore twrp backup files on windows:
- rename i.e. data.ext4.win000 to data.ext4.tar and open that .tar file with winzip or winrar (whichever reads .tar compressed files) - same goes for .win001 etc...
btw just a sidenote - twrp doesn't backup your personal media files (photos, videos, etc)
I know I'm bumping a super old thread in a sorta old forum area, but Google brought me here. I am trying to browse a TWRP backup but I have a feeling I need to do a bit more fussing around. The backup is split into data.ext4.win000 through data.ext4.win007 and each of the parts has an accompanying .md5 with the same naming structure (ie. data.ext4.win000 and data.ext4.win000.md5.) There's also a data.info file as well.
The system backup is the exact same as described above for the data, except it's only 2 parts (system.ext4.win000 and system.ext4.win001, with the accompanying md5 files and the info file.)
Can someone provide a bit of guidance? I'm using a Windows 7 Home Premium machine.
I'm in the same situation cognitivedissonance is. Any help to put us on the right direction?
The answer for one question would be beneficial and highly appreciated: in which format the data.ext4.win00x files are ?
cognitivedissonance said:
I know I'm bumping a super old thread in a sorta old forum area, but Google brought me here. I am trying to browse a TWRP backup but I have a feeling I need to do a bit more fussing around. The backup is split into data.ext4.win000 through data.ext4.win007 and each of the parts has an accompanying .md5 with the same naming structure (ie. data.ext4.win000 and data.ext4.win000.md5.) There's also a data.info file as well.
The system backup is the exact same as described above for the data, except it's only 2 parts (system.ext4.win000 and system.ext4.win001, with the accompanying md5 files and the info file.)
Can someone provide a bit of guidance? I'm using a Windows 7 Home Premium machine.
Click to expand...
Click to collapse
To browse the "system.ext4.winxxx" files, simply add at the end of the file ".tar" and decompress them in the same folder created by the first file.
The MD5 is a type of Checksum file wich is created just to check the integrity of the backup file is linked to.
the gladiator said:
I'm in the same situation cognitivedissonance is. Any help to put us on the right direction?
The answer for one question would be beneficial and highly appreciated: in which format the data.ext4.win00x files are ?
Click to expand...
Click to collapse
They are compressed in TAR format.
Mehdiway said:
For windows (if you have multiple files) :
Code:
copy /B data.ext4.win001 + data.ext4.win001 + data.ext4.win001 + data.ext4.win001 output.tar
Click to expand...
Click to collapse
Actually the file numbers should increment, using the above example:
Code:
copy /B data.ext4.win001 + data.ext4.win002 + data.ext4.win003 + data.ext4.win004 output.tar
In the example you're appending a file to itself over and over.
forkup said:
Actually the file numbers should increment, using the above example:
Code:
copy /B data.ext4.win001 + data.ext4.win002 + data.ext4.win003 + data.ext4.win004 output.tar
Click to expand...
Click to collapse
In most cases that should be;
Code:
copy /B data.ext4.win000 + data.ext4.win001 + data.ext4.win002 + data.ext4.win003 + data.ext4.win004 output.tar
And the other (uncompressed) .win image-files (like system_image.emmc.win) can be read with a tool like Ext2Read.
Mehdiway said:
For windows (if you have multiple files) :
Code:
copy /B data.ext4.win000 + data.ext4.win001 + data.ext4.win002 + data.ext4.win003 output.tar
Click to expand...
Click to collapse
Unfortunately, thats wrong. It might work with tar --ignore-zeros (-i) option but only for uncompressed archives.
Do not combine the data.ext4.win* files into one file before accessing. These are single standalone tarball archives (gzip compressed sometimes) you should rename and unpack for each own
I am also seeking a correct and up-to-date answer for this. I have TWRP 2.8.7.0 and multiple .win files, .md5 files and data.ext4 files in my SD Card. Is renaming archives enough to browse in 7zip? Is there any special tool for this, or do we also combine/merge multiple files into one?
Thanks a lot!
Can anyone here shed any light on my TWRP backup browsing issue described here? Thanks