Related
********Please Mods remove thread if possible!! New Tatuyama fix (ext4) has been incorporated into SuperRooter by DesignGears ********
LINK: http://forum.xda-developers.com/showthread.php?t=751934
DISCLAIMER
DO IT ON YOUR OWN RISK.
ME OR ANYONE ELSE ON THIS FORUM IS NOT RESPONSIBLE FOR BRICKED/DEAD DEVICES AND/OR DEAD SD CARDS.
YOU SHOULD UNDERSTAND EVERY STEP IN THIS HOW-TO BEFORE ATTEMPTING TO FOLLOW.
**********EDIT LOG*******************
8/10/2010: Added Startup Issue Reversion
8/11/2010: Added Alternate Manual Method that might work better than AUTO
8/11/2010: Added Possible Method of Backing EXT2 Partition
Here everyone... I have been trying lag fixes all over the place and I always seem to have issues partitioning the external sd for the apps... so after so many attempts, this was BY FAR the best lag fix out there.... It doesn't rely on the externalsd for functionality.
Easy and nothing special needed.
The steps below are pretty good, but I did things a little different.
Copied the update.zip to my external sdcard.
Then used Root Explorer to copy the update.zip to my internal sd card.
(******Here is the updated filed: http://forum.xda-developers.com/attachment.php?attachmentid=376882&d=1281390347******)
Then I used ROM Manager (Reboot into Recovery) to boot into the Linux Loader
Then I said update using update.zip (not install update.zip)
Then Reboot
For some reason it didn't install busybox 1.17.1 so install it manually
(located: http://forum.xda-developers.com/showpost.php?p=7574130&postcount=229)
Make sure after you install busybox.apk that you go into busybox and check to MAKE SURE you are running 1.17.1 ONLY. You might have an older version or newer version but it must be 1.17.1; if different just click install.
After that follow the MCR Scripts below. (Took about 6 minutes to do everything)
*** If MCR Scripts DOES NOT show up, its probably because you don't have the non market install hack on your phone. In the update.zip you can find the apk and install via ADB, but I didn't do it this way. ******
(Original Thread! Alternate method on OP in link below! Some people say it worked better for them.)
http://forum.xda-developers.com/showpost.php?p=7587405&postcount=417
@Tayutama
I ran the Tayutama update.zip using the up+power+menu button method, it installed in seconds and I restarted the phone. I ran the benchmark but still got 8xx scores. I'm an Noob, so needed more thorough instructions. These are now given below. NOTE: THIS METHOD IS MUCH MORE NOOB FRIENDLY AND DOES NOT REQUIRE A PC OR USB DEBUGGING MODE.
EDIT I had realised I needed to launch the newly installed MCR app after restart and choose a lagfix file to run. I ran the file and 'all complete'. This worked a treat. Ran Quadrant and now have a top score of 2114 running on JM2. System is much snappier. This mod of RyanZA fix by Tayutama is the most noob friendly also. Full instructions as follows:
EDIT Requirements: Make sure your phone has 'superuser' app installed by checking your app list. If it isn't installed, you can use a newer beta version of Tayutama's update.zip
available at; http://forum.xda-developers.com/atta...4&d=1281437129
Full instructions:
1. The update.zip installs all the files needed. It is attached here; http://forum.xda-developers.com/atta...2&d=1281390347
2. Place it on your internal sdcard
3. Turn off your phone.
4. Hold down Up+powerbutton+Menubutton for a couple of seconds until u see the galaxy logo .
5. Use the up and down buttons to get to update.zip.
6. Press menu button on update.zip to select it
7. It installs root, correct busybox (1.17.1) as well as all the scripts needed for the fix and the 'MCR Scripts' app to run the scripts. (NOTE: This version does not install superuser.app which is needed, although the beta update.zip does, so read 'requirements' above if needed)
8. After install, the phone restarts.
9. Go to the newly installed 'MCR Scripts' application from the app list, open it and choose from 3 scripts. For example, Lagfix10024 is the 1gb ex2 version.
10. The script should run and take a few minutes.
11. You should see an 'all complete' prompt, and this means you can close the application.
12. Run quadrant to test if the fix was applied.
Originally Posted by Tayutama
Don't know if you mind me posting this here RyanZA, but i made a update.zip out of your script. NOTE THIS ONLY WORKS ON 2.1
What this update.zip file does is that it copies a few files to your internal sdcard and installs ASE which can be used to run .sh files without the need to use a terminal.
There are 3 scripts included:
LagFix1024.sh - Makes a 1GB file on /data
LagFix512.sh - Makes a 512MB file on /data
RemoveFix.sh - Removes the lagfix
This also includes BusyBox 1.17.1 so no need to install that first.
Testet this on JM1
Click to expand...
Click to collapse
********Alternate Method that might even work better!! ****************
All the files are located in the update.zip file that you need to download.
1. Connect phone to PC, make sure adb can see it:
adb devices
2. adb kill-server
3. adb push createlagfix.txt /sdcard/createlagfix.sh
4. adb push playlogos1 /sdcard/playlogos1
5. adb push userinit.sh /sdcard/userinit.sh
6. adb shell su -c "/system/bin/sh /sdcard/createlagfix.sh"
7. adb kill-server
8. adb reboot
************ Reverting back if there are boot up and black screen issues ****************
If you have black screen and doesn't boot into the desktop, this is the fix to return back to normal state:
To fix that problem:
1. Boot into Recovery Mode (Vol Up + Vol Down + Power) Let go of Power after you see AT&T.
2. Delete User Cache
3. Delete All User Data
4. Then see if your phone boots up
5. If your phone does boot up then navigate to Settings -> Security -> Factory Reset
6. After factory reset your phone should be useable again.
DO NOT INSTALL THIS UPDATE IF YOU DO NOT KNOW WHAT YOU ARE DOING.
**********Possible method of Backing up Your EXT2 Partition **********
BTW I would also perform a NANDROID Backup as well which can be done by using ROM Manager to boot into the Android Loader....
Nandroid does NOT back up the apps off your SD card.
AppsToSD (I'm speaking re MoDaCo's rom here) uses the ext2 partition on your SD card for the /data/app and /data/app-private folders, where your actual downloaded application files are kept. Nandroid does NOT back this up, and simply mounting your SD card and copying the files off also does not back this up.
The only way to back up these critical folders is to directly copy them to somewhere else. You can use command line or Droid Explorer.
If you want to use command line, do this from an ADB shell or terminal:
mkdir /sdcard/backup/
mkdir /sdcard/backup/app
mkdir /sdcard/backup/app-private
cp -r /data/app/* /sdcard/backup/app/
cp -r /data/app-private/* /sdcard/backup/app-private/
This will create two folders on your SD card: app and app-private, both in a folder called Backup. It will then copy the entire contents of your /data/app and /data/app-private folders to your SD card.
After you do this, back up the entire contents of your SD card as normal.
To restore the files after replacing/partitioning your SD card, head to this thread:
http://forum.xda-developers.com/showthread.php?t=585349
Click to expand...
Click to collapse
Quadrant score was 917 and was on stock roms.....
Now Quad score is 2193 and still on stock roms.....
Tested on 2.1 Update 1 Captivate
Baseband: I897UCJF6
slider2828 said:
Quadrant score was 917 and was on stock roms.....
Now Quad score is 2193 and still on stock roms.....
Tested on 2.1 Update 1 Captivate
Baseband: I897UCJF6
Click to expand...
Click to collapse
Does it show strong real world improvements?
good job explaining nothing. troll harder
So....
This is a ""one step"" that isn't one step... ?.. ?
Oh, and for anyone wondering....
This appears to be the ext2 fix.
This IS the same fix from the otger thread, just packaged in update.zip format. Id be a bit more cautious using this one as it hasnt had as much testing among the I9000 crowd much less Captivate users.
Zilch25 said:
This IS the same fix from the otger thread, just packaged in update.zip format. Id be a bit more cautious using this one as it hasnt had as much testing among the I9000 crowd much less Captivate users.
Click to expand...
Click to collapse
Thanks for confirming this. I am seeing strong real world improvements, too. Dolphin Browser HD is very snappy and everything seems a lot faster (I am on stock captivate, btw, couldn't get this to work on I9000 for some reason).
Only thing is you should back up frequently because it can be corrupted a lot more easily since it is on ext2.
hm... i applied the update in clockwork mod recovery, i have super user and the correct busybox version installed and rebooted the system. i went to the app list and could not find the "MCR SCRIPT" you mentioned i should be seeing... am i doing something wrong?
THat is weird I saw mine in the apps list.... its just called MCR with a green dog bowl and light bulb....
Woops sorry for the truncation in the quote.... I have attached the update.zip file that you need to download.... The update.zip file you used is probably a ROM Manager Update.zip, so just rename it and copy the new update.zip file to the internal sd....
Sorry.....
solufein said:
good job explaining nothing. troll harder
Click to expand...
Click to collapse
What the hell does that mean.... You saying it doesn't work? Why not try it and it is an EXT2 fix.
max_warheads said:
So....
This is a ""one step"" that isn't one step... ?.. ?
Oh, and for anyone wondering....
This appears to be the ext2 fix.
Click to expand...
Click to collapse
This isn't one step because I don't have the USB cable with me. I just had a USB adapter for the microsd and I can't boot into the linux loader correctly without the cable, so I used ROM Manager. It would have been easier if I did.
Zilch25 said:
This IS the same fix from the otger thread, just packaged in update.zip format. Id be a bit more cautious using this one as it hasnt had as much testing among the I9000 crowd much less Captivate users.
Click to expand...
Click to collapse
Yup it is but on the internal card. Are you sure its the same? Look at the OG thread, a LOT of people have tried it with great success....
darth_vato said:
Thanks for confirming this. I am seeing strong real world improvements, too. Dolphin Browser HD is very snappy and everything seems a lot faster (I am on stock captivate, btw, couldn't get this to work on I9000 for some reason).
Only thing is you should back up frequently because it can be corrupted a lot more easily since it is on ext2.
Click to expand...
Click to collapse
How do you back it up?
i updated the zip and rebooted used busy box and i dont have that MCR app
Bionicboto said:
i updated the zip and rebooted used busy box and i dont have that MCR app
Click to expand...
Click to collapse
Same instructions before, did you download the update.zip? I just added that instruction. Can you try again after that?
slider2828 said:
THat is weird I saw mine in the apps list.... its just called MCR with a green dog bowl and light bulb....
Woops sorry for the truncation in the quote.... I have attached the update.zip file that you need to download.... The update.zip file you used is probably a ROM Manager Update.zip, so just rename it and copy the new update.zip file to the internal sd....
Sorry.....
Click to expand...
Click to collapse
when you say put the update.zip into the phone... do i put it in the internal sd card root? or do i put it in the ROM MANAGER folder? when i choose apply update, it only gives me one option to update from: /sdcard/update.zip. i choose that it installs properly and i reboot. i still don't the app, lol.
i also have removed the the recovery-update.zip or renamed it and tried to reboot into recovery mode via ROM MANAGER but it doesn't let me do it because it can't find the zip. then i tried to put the update into the the ROM MANAGER folder and it says it can't the find update.
its still the same cant find the app i reboot to recovery apply sd card update.zip go to yes and it says installed reboot and its not there
arsinic said:
when you say put the update.zip into the phone... do i put it in the internal sd card root? or do i put it in the ROM MANAGER folder? when i choose apply update, it only gives me one option to update from: /sdcard/update.zip. i choose that it installs properly and i reboot. i still don't the app, lol.
i also have removed the the recovery-update.zip or renamed it and tried to reboot into recovery mode via ROM MANAGER but it doesn't let me do it because it can't find the zip. then i tried to put the update into the the ROM MANAGER folder and it says it can't the find update.
Click to expand...
Click to collapse
Sorry for the bad reply.
Rename the update.zip that is already on the internal sd cards root because that is ROM Managers using ROOT Explorer
Then copy the update.zip that you downloaded to the external SD card.
Then copy update.zip from the external sd card to the internal sd cards root.
Then use ROM Manager to reboot into the linux loader.
Hope that helps?
-Ken
slider2828 said:
Sorry for the bad reply.
The update.zip that you use download, copy it the the internal sd card's root... (Basically where ROM Manager update.zip was. Like you did Rename the update.zip that is already there, because that is ROM Managers).
Hope that helps?
Click to expand...
Click to collapse
hm... the only update.zip i have is in the Recovery Mod folder named: recovery-update.zip. the only update.zip i have in the sdcard root is the update.zip i downloaded from the your url and have been applying that as the update. i seem to be having the same problem as Bionicboto.
should i have the rom manager's update.zip in there also or it doesn't matter? and i also have no external sd card. is that something i need in order to get this update working properly?
Did you ever perform a backup with the ROM Manager? That usually creates a update.zip.....
Basically when I log into root explorer and click on SDCARD.... you should see the update.zip in that folder along with Android folder, busybox folder, clockworkmod folder, DCIM folder, downloads folder, etc etc....
slider2828 said:
Did you ever perform a backup with the ROM Manager? That usually creates a update.zip.....
Click to expand...
Click to collapse
i preformed a backup right before i did all this. i did notice the update.zip in there. i took it out and put in the update.zip you uploaded. do i need both in there?
thanks for the quick replies btw.
Nope... Try this... with ROM Manager,
Choose Flash ClockWorkMod Recovery and that will recreate the boot files for ROM Manager.... and also backup your current ROM again.
Then try the steps again.
OMG Dude I noticed you in oakland, I am in hayward/san leandro.... We can try after I get off work which is in 30 minutes. and then take 30 minutes to get back to SL....
You wanna meet at the starbux on marina?
Flashed and installed perfectly. Bumped my quadrant up to 2117. Good post, thanks.
ok so im not a really noob to xda but i have been looking for 3 days on a clear how to update a new kernal... i just cant find it im not sure if im wording it wrong or what please help you will be my internet hero and my mind will stop going insane...
thanks
Is this for hd2? If it is then all u do is find the kernal u want and replace with the old one. What build are u using by the way.
Read this:
http://htc-linux.org/wiki/index.php?title=Leo/UpdateKernel#Installing_latest_Linux_kernel_image_.28zImage.29
All you need to do is copy in the zImage and .ko files. The .ko files go in the "modules" folder, a subdirectory of "root."
Most of the kernels will come with following files :
zImage - The Kernel
bcm4329.ko - Wireless Module
tun.ko - Networking Module
yaffs.ko - File System (Optional at this time)
The way I apply the kernel is shut down the phone and use card reader and attach to my laptop. Assuming your build is under SDCARD\Android, files are copied to following locations :
zImage -> Android
*.ko -> Android\root\system\lib\modules
Anything to do with the lights modules goes to Android\root\system\lib\hw
Anything to do with RIL (like libril*) goes to Android\root\system\lib
Create the \root\system\lib\* directories if they dont exist, like for Sense builds. Now just back normally.
Hope it helps
v-b-n said:
The way I apply the kernel is shut down the phone and use card reader and attach to my laptop.
Click to expand...
Click to collapse
Is it also possible to update kernel without external card reader, by connecting HD2 to the PC (USB) and replacing files while in Windows Mobile HD mode?
THANKS!
What if a certain developer updates his android build and version, do I just copy the new stuff on the SD card, overwrite, and keep the Image iso file so I dont lose my settings ?
Do any of the above and finally to verify that a kernel is installed start Terminal Emulator (or any available terminal program) and enter:
uname -r
Should give you the kernel version.
Hmmm usually, what I do is either connecting the phone in USB in Windows Mobile mode, or power off and use a micro-SD card reader. Then:
- BACKUP the DATA.IMG to desktop or whatever
- Delete the root directory in your Android folder if there is one
- Delete all the .something directories (temp dir created by android)
- Copy the content of the kernel in the Android dir : Haret (emulator), initrd.gz (boot logo), zImage (drivers/kernel)
>Ignore the dev folder in hastarin build for example
>DO COPY the "root" folder (of hastarin 7.6 for example) to the android folder : HARET will update the android OS "suppletive drivers parts" without any need to enter commands or else (what i've been told)
Done
Howdy all,
Just wondering, how are the system.img files made? I have read that if it's a YAFFS image file, that the maximum filesize cannot exceed 128MB. However, I've seen on some NAND HD2 Android builds, the system.img filesize is >128MB.
My question is, what method are you guys using for making the NAND system.img files to flash within MAGLDR? (ie. is it like a ZIP archive with a .img extension on it)
I'm currently working on a remix of a ROM that I use (a hint is in my Sig), and I know that the update.zip method that was used on "true-Android" devices to change ROMs doesn't apply to our MAGLDR method now.
Cheers and I'm sure you'll see another ROM for the HD2 in the coming weeks!
IcedCube.
IcedCube said:
Howdy all,
Just wondering, how are the system.img files made? I have read that if it's a YAFFS image file, that the maximum filesize cannot exceed 128MB. However, I've seen on some NAND HD2 Android builds, the system.img filesize is >128MB.
My question is, what method are you guys using for making the NAND system.img files to flash within MAGLDR? (ie. is it like a ZIP archive with a .img extension on it)
I'm currently working on a remix of a ROM that I use (a hint is in my Sig), and I know that the update.zip method that was used on "true-Android" devices to change ROMs doesn't apply to our MAGLDR method now.
Cheers and I'm sure you'll see another ROM for the HD2 in the coming weeks!
IcedCube.
Click to expand...
Click to collapse
The system.img is a yaffs2image. Google 'compiled windows unyaffs' use that program to take a peak inside the .img. When you're completely ready to make your own .img your gonna need a linux distro or cygwin w/mkyaff2image compiled. However I recomend compiling the mkfs.yaffs2 command if you are using linux. Alternatively you can place the /system/ directory you are trying to make an image on your SD and run that command in the terminal emulator in Android. It should look like this #mkyaffs2image /sdcard/system/ System.img
Hope that helps.
KillaHurtz said:
The system.img is a yaffs2image. Google 'compiled windows unyaffs' use that program to take a peak inside the .img.
Click to expand...
Click to collapse
Does this give you write abilities so that files can be changed out pre-flash?
dharvey4651 said:
Does this give you write abilities so that files can be changed out pre-flash?
Click to expand...
Click to collapse
I think you have to dump them to a folder, then you can change what you want. Then do the yaffs2 cmd and it will package it back up to .img for flashing...
Chris
noellenchris said:
I think you have to dump them to a folder, then you can change what you want. Then do the yaffs2 cmd and it will package it back up to .img for flashing...
Chris
Click to expand...
Click to collapse
I think that a tutorial is in order. Someone who knows how to extract and replace files in a system.img needs to write a short tutorial on how to do it. - A simple step by step on how to decompile a system.img and re-compile it.
I for one would be extremely grateful because I finally worked out a perfect MMS patch and I'd like to be able to easily modify the builds pre-flash.
dharvey4651 said:
I think that a tutorial is in order. Someone who knows how to extract and replace files in a system.img needs to write a short tutorial on how to do it.
I for one would be extremely grateful because I finally worked out a perfect MMS patch and I'd like to be able to easily modify the builds pre-flash.
Click to expand...
Click to collapse
I have been trying to do that all night. I can unpack them but haven't got around to repacking them. For now all I do is install the build and push the patched file that I have and do a AD hardrest in MAGLDR. MMS 300-1024k and all TMO US app works.
dharvey4651 said:
I think that a tutorial is in order. Someone who knows how to extract and replace files in a system.img needs to write a short tutorial on how to do it. - A simple step by step on how to decompile a system.img and re-compile it.
I for one would be extremely grateful because I finally worked out a perfect MMS patch and I'd like to be able to easily modify the builds pre-flash.
Click to expand...
Click to collapse
yeah, it would be very nice if smb can write some tutorial on modifying system.img files
i have been trying to figure this out too!
IcedCube said:
This is IcedCube, the Developer of GingerHD2, a Android 2.3 ROM for your HD2.
Click to expand...
Click to collapse
Thought I should point out that you could really confuse things by using that name...
http://forum.xda-developers.com/showthread.php?t=871387
That's not actually a Gingerbread build - it's just themed to look like one, but still got the same name
hnamanh said:
I have been trying to do that all night. I can unpack them but haven't got around to repacking them. For now all I do is install the build and push the patched file that I have and do a AD hardrest in MAGLDR. MMS 300-1024k and all TMO US app works.
Click to expand...
Click to collapse
Another option is to connect to ADB or Android Commander before going through the initial setup(when it asks you to choose your language) and change the files then - use the PC to reboot the phone, not the phone's built-in reboot. This should take you right back to the setup screen where this time, should show United States localization.
Still a bit too much work. I'd like to be able to patch the build, flash it, and be good to go.
found this but too educated for me
http://android-dls.com/wiki/index.php?title=HOWTO:_Unpack,_Edit,_and_Re-Pack_Boot_Images
sorry i think this one is normal data img.not sure.
well i did say it was too educated for me
Turorial
KillaHurtz said:
The system.img is a yaffs2image. Google 'compiled windows unyaffs' use that program to take a peak inside the .img. When you're completely ready to make your own .img your gonna need a linux distro or cygwin w/mkyaff2image compiled. However I recomend compiling the mkfs.yaffs2 command if you are using linux. Alternatively you can place the /system/ directory you are trying to make an image on your SD and run that command in the terminal emulator in Android. It should look like this #mkyaffs2image /sdcard/system/ System.img
Hope that helps.
Click to expand...
Click to collapse
Windows
-----------------------------------------------------------------------------
Ok, let's start again. If you are using windows, google the said phrase above and you will find the precompiled utility 'unyaffs'.
Place the System.img you want to extract in a new directory with unyaffs.exe & drag the .img onto unyaffs. A command window will open and start extracting the files in the image to that same folder. You can now explore & edit/pull whatever you need to get things going. Once you have it the way you want copt it to your SD/root/ & make a folder for it with an obvious name like "Project" or "Test". Now to get it back into a bootable .img open Terminal Emulator in Android & enter the following
#mkyaffs2image /sdcard/NAMEofFOLDERuCHOSE/ System.img
**alternatively you can do this in windows itself if u have the utility compiled under cygwin or simular.
Linux
-----------------------------------------------------------------------------
Ok, you will need the unyaffs & mkfs.yaffs2 utilities compiled and working 1st off.
mkyaffs2image works to make the image however it fails upon flash with DFT Android Flasher. So I recomend mkfs.yaffs2 & have included it, you will need to place it in /usr/sbin/. If you have trouble copying it open a terminal and run "gksudo nautilus" then copy to the above mentioned directory.
**Now that those utilities are working let's get to work.
open a terminal and run 'unyaffs /home/yourusername/Desktop/targetdirectory/targetimage.img
copy/edit/pull the files you want. When your ready to build the image you are happy with open a terminal and run 'mkfs.yaffs2 /home/yourusername/Desktop/targetdirectory/ System.img'
Now your ready to flash !
System.img & Boot.img Contents
============================================================
System.img contains the entire root/system/ directory in Android
System/
app
bin
etc
fonts
framework
lib
lost+found
media
usr
xbin
build.prop
dmesg.txt
Boot.img contains
Boot/
initrd.gz
zImage
lost+found
============================================================
Hope that helps guys, It's my first tut on XDA
**EDIT: I included an archive for windows users that has unyaffs2.exe & cygwin1.dll
The Linux archive contains mkfs.yaffs2.x86, once moved to /usr/sbin/ rename to mkfs.yaffs2
The process works exactly the same for Boot.img
you need linux and run command by terminal
put them in /bin
http://www23.zippyshare.com/v/13814384/file.html
then you can yaffs or unyaffs
example
unyaffs /home/rafpigna/folder_with_img_you_wann_unpack/system.img
or
mkyaffs2image /home/rafpigna/folder_with_stuff_you_wanna_pack/ system.img
strange thing...when I open with unyaffs and then close with mkfs.yaffs2 or mkyaffs2image I get init: untracked pid 250 exited (where 250 varies) in a loop :S
some light for me?
michyprima said:
strange thing...when I open with unyaffs and then close with mkfs.yaffs2 or mkyaffs2image I get init: untracked pid 250 exited (where 250 varies) in a loop :S
some light for me?
Click to expand...
Click to collapse
What platform are you using? Have u tried copying your target directory to your sdcard and running the command in android's terminal?
Reguards
KillaHurtz said:
What platform are you using? Have u tried copying your target directory to your sdcard and running the command in android's terminal?
Reguards
Click to expand...
Click to collapse
linux x64.
btw no I didn't, because I want to make a rom (I'm not new to android development but that makes me think that I'm probably stupid )
Everything I do doesn't work.
Already tried something like:
- opened a premade working rom, exchanged just app and framework: no way
- exchanged everything but not bin/xbin/lib: no way
- exchanged just what was different between a stock and a premade leo rom: still no way
mmmh...
yaffs2
There is actually a way to modify files in a yaffs2 image but I've not done it my self yet. I'm 100% sure it's possible cuz everything is possible.... under Linux of course.
You need:
Linux, compiling skills, mounting skills, etc.
Basically for any other filesystems you can mount them as loop devices but not yaffs2. For yaffs2 you actually need a virtual mtd block device. once you have the mtd device you can mount the yaffs image on it.
For details google for: mounting yaffs image
and focus on virtual mtd block device.
michyprima said:
linux x64.
btw no I didn't, because I want to make a rom (I'm not new to android development but that makes me think that I'm probably stupid )
Everything I do doesn't work.
Already tried something like:
- opened a premade working rom, exchanged just app and framework: no way
- exchanged everything but not bin/xbin/lib: no way
- exchanged just what was different between a stock and a premade leo rom: still no way
mmmh...
Click to expand...
Click to collapse
http://www.miui-dev.com/forums/showthread.php?481-Howto-Make-your-own-Android-Build-for-the-HD2
This has a list of files to be pulled. Hope this helps. BTW michy I need help with a kernel, know anyone?
I'm Having a problem using on Linix, when i use the unyaffs trough the terminal it extracts the rom but not the squashed contents, which in the main apps and frame work are at on thoughs roms. I do get a file that says squashed but empty. I tried on cyanogens 6.1 rom and everything extracted fine.but that rom does not have a squashed folder, am i doing something wrong?
1. If i unyaffs System.img and manually remove some programs/aplications then create System.img with yaffs, does it programs will appear in apps and does my rom will be caused a more memory for other programs for installation?
2. Is it possible to unyaffs Boot.img then replace zimage with newest kernel like MDJ or hastarin then yaffs to new Boot.img, After that i suppose then this Android OS will be on new kernel???
3. And... If i remove zimage and initrd.gz from Boot.img, create new Boot.img without these two files and these two files copy to SD card and define that two files in flash.cfg for find on SD. Does it works?
Sorry for bad English.
Android Boot Manager (ABM), my goal is to make the procedure (Backup, Unpack, Edit, Repack and Flashe boot.img or recovery.img) so easy and accessible to all users without resorting to the command prompt , only a single click to get a quick and successful outcome at the same time .
This is the third version of the program.
Source (GITHUB SOURCE https://github.com/aToxyD/android_boot_image_manager_apk).
WHAT'S NEW
- Some optimization.
- Add new Text Editor with high syntax.
THANKS
* xiaolu, original author of boot.img tool(GITHUB SOURCE https://github.com/xiaolu/mkbootimg_tools).
* Modding.MyMind, for his heavily modification of boot.img tool.
* Tah Wei Hoon, for TextWarrior.
* Dmytro Tarianyk, for Android Floating Action Button.
* Anthony Restaino, for Grant.
IMPORTANT
- Root is only necessary for Unpacking boot patched by "superSu or Magisk" and Backup/Flash Operations, so if you want to unpack stock boot or you have your favorite flasher apk like "Rachr", if so you dont need to check "Root Access" in settings menu.
- Please uninstall any previous version of ABM before installing the newer.
I do not like people to coming here and take what they wanted and leave like a thief , at least leave a comment. . .
This work is for all, so help your self.
atoxyd said:
Android Boot Manager (ABM), my goal is to make the procedure (Backup, Unpack, Edit, Repack and Flashe boot.img or recovery.img) so easy and accessible to all users without resorting to the command prompt , only a single click to get a quick and successful outcome at the same time .
This is the second version of the program.
WHAT'S NEW
- Corrected some bugs related to compatibility with Android 6.
- Use xiaolu mkbootimg tools (GITHUB SOURCE https://github.com/xiaolu/mkbootimg_tools)
TODO
- add support to x86, mips arch.
- add support to put files to unpacked folder.
- add support to combinedboot , in Xperia device recovery ramdisk is combined with system ramdisk.
IMPORTANT
- The apk need root access to work.
- Note that make change by adding files to unpacked folder with root explorer, the owner will be root and the apk will not work, if you do this you must change the owner to ABM apk.
THANKS
* xiaolu, original author of boot.img tool(GITHUB SOURCE https://github.com/xiaolu/mkbootimg_tools).
* modding.MyMind, for his heavily modification of boot.img tool.
* @bigsupersquid for his support and motivate from the beginning.
Click to expand...
Click to collapse
mtk support?
lixia1998 said:
mtk support?
Click to expand...
Click to collapse
Certainly I am working on this , but you should help me.
New version won't install on Kit Kat
PiggyFlooper said:
New version won't install on Kit Kat
Click to expand...
Click to collapse
Okay my friend, try to uninstall the old version, and tell me.
atoxyd said:
Okay my friend, try to uninstall the old version, and tell me.
Click to expand...
Click to collapse
You were right, I'll start project tonight editing ramdisk on my LG Volt
Are extracted files accessible in file system? I can't find them
levone1 said:
Are extracted files accessible in file system? I can't find them
Click to expand...
Click to collapse
Unpacked to /data/local/ABM
PiggyFlooper said:
Unpacked to /data/local/ABM
Click to expand...
Click to collapse
But beware when you add new files to the unpacked folder , you must take into account that owner will be. root , so you must set owner to ABM apk.
atoxyd said:
But beware when you add new files to the unpacked folder , you must take into account that owner will be. root , so you must set owner to ABM apk.
Click to expand...
Click to collapse
So I tested with twrp IMG, and successful unpack to /data/local. Then I tried with my current kernel, and nothing's happening. I get a message that's not clear to me, (screenshot 2), and no output. Any ideas?
levone1 said:
So I tested with twrp IMG, and successful unpack to /data/local. Then I tried with my current kernel, and nothing's happening. I get a message that's not clear to me, (screenshot 2), and no output. Any ideas?
Click to expand...
Click to collapse
It seems that you delete the directory /data/local/ABM, So close the apk and open it again or wipe apk data and try again, if any problems tell me please :thumbup:
atoxyd said:
It seems that you delete the directory /data/local/ABM, So close the apk and open it again or wipe apk data and try again, if any problems tell me please :thumbup:
Click to expand...
Click to collapse
That was my original thought, so I wiped data and tries again, but no different... I'll just uninstall and reinstall, and probably be fine. Thanks
atoxyd said:
It seems that you delete the directory /data/local/ABM, So close the apk and open it again or wipe apk data and try again, if any problems tell me please :thumbup:
Click to expand...
Click to collapse
Same thing after reinstall. I tried with twrp file again, and works fine, but with kernel file, error msg...
It seems that the image you want to unpack it is not an android image.
atoxyd said:
It seems that the image you want to unpack it is not an android image.
Click to expand...
Click to collapse
It's the AOSP kernel from the ROM I'm currently using.
https://mega.nz/#!do51zAZS!QG5jTdpynPjNs7jrbERsdwRKjdac9tz-0SxUX6HyJsk
Try to edit devices.xml in /sdcard/ABM directory and backup kernel using ABM app, after try to unpack boo.img backed up, you find it in /sdcard/ABM/backup directory.
levone1 said:
It's the AOSP kernel from the ROM I'm currently using.
https://mega.nz/#!do51zAZS!QG5jTdpynPjNs7jrbERsdwRKjdac9tz-0SxUX6HyJsk
Click to expand...
Click to collapse
Well my friend, try to delete space in the name of image.
Linux ..........img will be
Linix_..........img
levone1 said:
It's the AOSP kernel from the ROM I'm currently using.
https://mega.nz/#!do51zAZS!QG5jTdpynPjNs7jrbERsdwRKjdac9tz-0SxUX6HyJsk
Click to expand...
Click to collapse
Well my friend, delete space in the name of the image.
Linux 3.10....img
will be
Linux_3.10....img
Well my friend @levone1, delete space in the name of the image.
Linux 3.10....img
will be
Linux_3.10....img
Deleted by woltrex
Deleted by Woltrex.
Deleted by Woltrex
What would I need to change in our windows installer to help create the data.img the way you are? https://github.com/BlissRoms-x86/An.../Android_UEFIInstaller/BasicInstaller.cs#L210
proof I am no windows developer, I fudge my way through it
Hi Woltrex,
Could you please adapt your toolbox to work with Android-x86 8.1-rc1? If I try to edit data or system images with your current toolbox the system doesn't boot.
the tools link is nothing but advertisements. Can't make this work
ariadnejro said:
Hi Woltrex,
Could you please adapt your toolbox to work with Android-x86 8.1-rc1? If I try to edit data or system images with your current toolbox the system doesn't boot.
Click to expand...
Click to collapse
I will make the necessary arrangements in next version. :good:
DigitalMD said:
the tools link is nothing but advertisements. Can't make this work
Click to expand...
Click to collapse
I do not fully understand. What you mean?
electrikjesus said:
What would I need to change in our windows installer to help create the data.img the way you are? https://github.com/BlissRoms-x86/An.../Android_UEFIInstaller/BasicInstaller.cs#L210
proof I am no windows developer, I fudge my way through it
Click to expand...
Click to collapse
I need to check it. Is there a problem creating Data.img?
WoltreX said:
I need to check it. Is there a problem creating Data.img?
Click to expand...
Click to collapse
I think he means that when the Windows UEFI installer(that is linked in the Blissx86 OP) is extracting the contents of the iso onto the HDD partition that is selected.
He wants the installer to create the data.img in a similar manner as your tool does
WoltreX said:
I need to check it. Is there a problem creating Data.img?
Click to expand...
Click to collapse
arifqur said:
I think he means that when the Windows UEFI installer(that is linked in the Blissx86 OP) is extracting the contents of the iso onto the HDD partition that is selected.
He wants the installer to create the data.img in a similar manner as your tool does
Click to expand...
Click to collapse
^^ Yuppers ^^
Works great.. thank you woltrex
Bliss OS/Android PC Toolbox updated.
Changelogs v1.1
-Added Android-x86 Oreo support. You can unpack/repack android x86 images.
-Added fsconfig options. Android x86 images requires it. (I will add guide in first page about it)
-Increased stability and fixed some bugs.
I know what I say would be foolish but...
Remix OS Toolbox? (Lollipop&Marshmallow)
im having problem extracting bliss os system.sfs
Parallel unsquashfs: Using 4 processors
7362 inodes (20785 blocks) to write
write_xattr: could not write xattr security.selinux for file C:\Users\farivar\Downloads\APT\unpack\system/app/AmberTheme/AmberTheme.apk because you're not superuser!
write_xattr: to avoid this error message, either specify -user-xattrs, -no-xattrs, or run as superuser!
Further error messages of this type are suppressed!
[=================================-] 20785/20785 100%
created 6654 files
created 956 directories
created 708 symlinks
created 0 devices
created 0 fifos
Click to expand...
Click to collapse
farivar said:
im having problem extracting bliss os system.sfs
Click to expand...
Click to collapse
What is the problem? I am seeing system.sfs extracted %100.
Hi,
I'm having trouble getting a BlissOS system.img to work. I already have a working installation of BlissOS, but am trying to add Surface drivers. So I extracted the system folder and then packed system.img, but on booting the modified system, it's freezing just when it says it is starting android (before the boot animation appears).
Specific steps I used:
-unpack system.sfs
-added my drivers, modified fs_config.txt to include permissions for my drivers e.g., system/lib/firmware/config.bin 0 0 644
-repack system.img
-remove system.sfs and replace with system.img
I even tried to just unpack and repack system.img without the drivers and that didn't work for me either. Any suggestions for what I may be doing incorrectly?
DoughMucker said:
Hi,
I'm having trouble getting a BlissOS system.img to work. I already have a working installation of BlissOS, but am trying to add Surface drivers. So I extracted the system folder and then packed system.img, but on booting the modified system, it's freezing just when it says it is starting android (before the boot animation appears).
Specific steps I used:
-unpack system.sfs
-added my drivers, modified fs_config.txt to include permissions for my drivers e.g., system/lib/firmware/config.bin 0 0 644
-repack system.img
-remove system.sfs and replace with system.img
I even tried to just unpack and repack system.img without the drivers and that didn't work for me either. Any suggestions for what I may be doing incorrectly?
Click to expand...
Click to collapse
If you edit fs_config, you must repack with Android-x86 option. That drivers can be uncompatible with your system. So system can not boot. I did not encounter any problems with the edits I made. You should be careful when editing the .img files.
Deleted by woltrex
WoltreX said:
Deleted by Woltrex.
Click to expand...
Click to collapse
? what happened ?