does anyone know how to flash CWR to the intercept?
i took a peek at the guide here but my sync kept timing out and i never got everything pulled and i am not sure how to pull the boot and recovery on this phone to use them for the walk through.
Related
Hey guys i know "Help!" threads get annoying (at least in the Fascinate forum they do.) but i could really use some help.
Rooted my friends phone today (root,clockwork,rom manager), and was going to install regular JAC kernal /voodoo w/o color fix.. I made sure the phone had the smaller NAND chip. Installation went fine (phone booted, voice told me it was switching to ext. 4.) and the voice said voodoo was complete. The phone was stuck at the S logo for about an hour and it was then i decided voodoo was botched. From there i rebooted to clockwork and went to restore the nandroid i made when i rooted. The nandroid got stock at one of the Data files for about 30 minutes. (i have a feeling this is around where i messed things up myself) Decided screw it and was going to flash JI6(T959UVJI6) and the stock kernal with ODIN. Now the phone boots past the S logo but the screen stays black and only the backlight menu buttons light up. It wont go past there. Any quick help is appreciated.
You didn't disable the lagfix I'm assuming.
Odin Eugene's Froyo that doesn't brick, then Odin JFD, install ROM of you're choosing.
Did you even try to search for a fix before posting???
~SB
problem0atique said:
Hey guys i know "Help!" threads get annoying (at least in the Fascinate forum they do.) but i could really use some help.
Rooted my friends phone today (root,clockwork,rom manager), and was going to install regular JAC kernal /voodoo w/o color fix.. I made sure the phone had the smaller NAND chip. Installation went fine (phone booted, voice told me it was switching to ext. 4.) and the voice said voodoo was complete. The phone was stuck at the S logo for about an hour and it was then i decided voodoo was botched. From there i rebooted to clockwork and went to restore the nandroid i made when i rooted. The nandroid got stock at one of the Data files for about 30 minutes. (i have a feeling this is around where i messed things up myself) Decided screw it and was going to flash JI6(T959UVJI6) and the stock kernal with ODIN. Now the phone boots past the S logo but the screen stays black and only the backlight menu buttons light up. It wont go past there. Any quick help is appreciated.
Click to expand...
Click to collapse
If you can still boot into clockwork recov. you can save it by pushing the undo voodoo zip file that was mentioned about. Assuming that u have adb access. If not odin froyo that doesnt brick tepartition checked. Turn off. Boot back in download. Odin stock jdf. Ji6 isnt a standalone rom. Its more like a no wipe update. Lucky his vibrant wasnt hardware locked lol. He will have a 90% chance of losing EVERYTHING
Had to odin flash froyo that doesnt brick then jfd and yep he lost all his data but he didnt have much to begin with. Now happily running Fusion. Thanks for the help guys!
I tried to use SuperOneClick to root my phone and it seemed to work. The program came back saying I successfully rooted my phone.
I then went to ClockworkMod to install cyanogen and clicked on the appropriate boxes to begin the download process for cyanogen 6.0 stable mod and ran it.
My phone rebooted and started to run some scripts.
Now, the phone just reboots to the green mytouch screen and continues to loop like that and I have no idea what to do.
I can get into fastboot on the mt3g and when I do, my pc makes the sound that states that the phone is connected but when I try to get into the mytouch, using adb, my pc cant access it but when I plug up my G2, I can see the serial number and such showing that it is connected.
I tried to follow the fastboot driver installation page but it didn't seem to work.
Bottom line is I would really enjoy a functional MT3G in either the regular form or cyanogen (which is why im in this predicament now )
For the the record,
I was running 1.6 but got the OTA update for 2.2 before I ended up blowing up my phone.
Thanks for reading this and any aid would be greatly appreciated.
UPDATED:
I found something called SAPPIMG.NBH that allowed me load Android 1.5 onto my phone. I now am back to a functioning device but still, I am super stuck on trying to get cyanogen onto my device. Any helpful hints? From what you read above, did I miss something?
Thanks again.
... Sadness... I have been bashing my face against this mt3g and haven't been able to get cyanogenmod on this phone for the life of me. I have tried all of the builds from 5.08 up to RC1 of 6.10 and I just get the infinite loop at the cyanogen boot up screen. I even tried to flash 2.23.XXXX radio to see if it gets past the boot loop and it does not. Anybody have any insights into my issue?
Thanks,
You must go into recovery mode(boot up by holding down home + power). That will get you to Clockworkmod recovery(I am assuming since you said you downloaded using Clockwork app). From there you need to wipe cache, and anything else you can wipe. Then try installing Cyanogenmod after that. Without wiping the there is not enough space to install and it causes a bootloop.
I'm in the same boat, I'm stuck in a boot loop and I cannot get any ROM to fully load in. I'm using clockwork recovery Radio 2.22 32B.
I tried wiping everything but that still doesnt seem to work. I noticed when I try wiping Davlik cache I dont see any message on the bottom. I thought it would normally give me some sort of message stating that it is wiping davlik or something so maybe it isnt actually wiping it?
Is there some other way to make sure davlik is wiped? Or something else I can do. I just want the phone to boot up at this point. I can get into recovery but thats it.
I know I shouldve done a backup but dumb me was such in a rush I completely forgot, I know im a idiot...
Het I found that same .img file and also reverted back to 1.5 then just went up to 2.2 not sure what was wrong but Rom I put on just went into a boot loop. Maybe it was clockwork recovery.
Sent from my ADR6300 using XDA App
the padawan becomes the master... Sort of...
The problem is that you cannot go directly to 2.2 from 1.5. You have to do the incremental upgrades that take you from 1.5 to 1.6 then 1.6 to 2.2
hey i just attempted to root my wife's nook color, 1.3, using this method http://forum.xda-developers.com/showthread.php?t=1054027
i have made the boot disk and pushed both nooter zips to disk, cwm comes up and it runs both zips just fine, ive tried both one after other ten reboot, reboot in between, wipe dalvik and the run but i always get stuck in the boot loop
can anyone tell me what im doing wrong here
and the plot thickens... so i did the 8 failed manual reset, and rebooted to stock, repeated process.. im out of bootloop but it appears the touch screen doesnt work anymore???
yeah so no matter how many times i 8 fail reset still no touch screen, all other buttons work, tried reinstalling clockwork and nothing...i bought the insurance, do i need to run it over cause im outta ideas, my first thought was ui was missing file but it should go back if i reset shouldnt it???
just shoot me..please
ok back to stock, re root, boot loop again, re stock , cm7 (update-cm-7.1.0-encore-signed) + gapps (gapps-gb-20110307-signed) and now application setup wizard has stopped unexpectedly.....stuck...thoughts? please am i over thinking/looking something
day two...
i created sd boot img with cwm 3.2.08, im seeing that i need to use cwm 3.2.01 in a few places.. when i get the file from clockwork (recovery-clockwork-3.2.0.1-encore) and try to write the image to the sd card something is wrong, its not a format that the windows recognizes and so i cant add zips to it and i get nothing in the nook. ive tried to reformat from the pc and in an old android phone i have but its always the same when i try to write to sd , is this the wrong image, can i find it somewhere else
i am using same 8gb sd card i made first boot disk out of, do i need to use a new one??
i got it to work i have good cwm 3.2.01 on nook...
stock + root?
ok it seems that cwm 3.2.0.8 was definitely my problem, i switched to recovery-clockwork-3.2.0.1-encore which i got from http://tinyw.in/0Vw
problem remains that when i flash man nooter 18 then 16 i get nothing, I was stuck on "n" load screen not even a boot loop
i then pushed cm7 again and i am operating as a full android tablet, i want the stock nook image with gapps can anyone help.. im leaving be till i get a answer, didnt want to update to 1.4 or downgrade to 1.2 havent seen a stock img of 1.3 anywhere
So I had just gotten my Nexus 10 yesterday. Downloaded the root toolkit to root, and eventually install CM10.1 for it. However, after installing CM10.1, i realized I can make do with stock, for my own reasons. And so late last night(late enough that I should have been playing around with clockwork recovery), I somehow ended pressing format /system, thinking it was mount, as I was just playing around. Yes, I clicked yes, I had no idea what was going on. I have a nexus s, so I'm used to the recovery by now. So now I'm stuck, without any way to flash a new rom. I made a backup of my stock rom, but now I don't know how to get it back from my computer! I have no way to boot into adb, or atleast I can't figure out how. Any help is greatly appreciated.
TL;DR No rom to boot, can't access SDcard from computer to cop another one over, or restore an older back up.
Nevermind, I managed to get sideload working through adb. I was finally able to flash CM10.1 again.
Here is an instructional video that every Android user must watch:
http://www.youtube.com/watch?hl=en&...ture=player_embedded&v=wwleOote5M0&nomobile=1
jk
Hey Guys,
Long time lurker here. Very cool stuff everyone is doing!
Anyways, I've rooted my boost xprt and now I was trying to flash CM7 onto the phone. After I installed the gapps onto the phone I mean to go back and get the rom but alas...I couldn;t
I get this message:
Install from sdcard complete.
Back menu button disabled.
This was after I wiped the system and cache. I don't want to do a battery pull because there is no system (other than in recovery) to get me back to regular phone status.
Any ideas? The scrolling 3x doesn't work because there is no menu to scroll through.
Ok, so none of that worked...ruined the phone so I flashed back to stock sbf using the RSD lite.
Now when I connect my phone, how exactly can I get back to the original back up I saved (after root). It's still saved on the sd card...
Update
Update again*
I was able to re-root, then install ROM manager and CWM again (luckily you pay once and you have access to it forever!). From there you can boot to recovery which was saved on my sd card from before.
Anyone come up with an idea about why the initial problem happened?
EDIT* I COULD NOT boot to the recovery that I had originally saved.
Any ideas on that?