When i flashed the sbf it get stuck at the sbf screen where it says bettery ok. At the top i have a bunch of errors. HELP I get error A5, 70, 70, 00, 1F
Bootloader is D2.35 and i am trying to flash 2.2.20 should i use 2.3.20
Yes unless your phone lives under a rock and somehow missed the 2.3.20 OTA update.
You have probably been updated and need the new 2.3.20 sbf file.
Once you are updated the 2.2.0 sbf won't flash your phone because the bootloader was changed in the update.
Sent from my DROID2 using XDA App
ok so right know i am downloading the 2.3.20 bootloader and sbf file should that work
i am sbfing the full 2.3.20 sbf
Thread can be closed
Related
Alright so I was trying to update to the new Fission ROM but it had the whole audio bug thing so I reverted back and was going to update to .340 before flashing back over to fission. I downloaded the update zips for 340 but I didn't know that it was recommended to flash one, reboot, flash the other, etc. Which may be why I'm stuck at this screen..
It's just black and says
"Bootloader
30.04
Err:A5,70,39,00,27
Battery OK
OK to Program
Transfer Mode:
USB"
I've tried to SBF but it's still stuck there. Can't boot into recovery, nothing. Can anyone help? Or am I going to have to try and get verizon to replace my phone.
Edit: Just realized I clicked development instead of general. Oops. Sorry mods.
Edit 2: I fixed it. I'll leave this here for anyone who has the same problem. I had to SBF back to .320 instead of .340 and then boot into recovery and wipe data/cache.
I had the same problem. I sbf'd .340 and that worked for me.
Sent from my DROIDX using Tapatalk
Good to see you fixed it. The reason you had to SBF back to .320 was because it was a full SBF, and .340 has only been seen in System-Only form which does not include a bootloader.
I was running the Fission 2.4.3 rom and it was having some problems because I read that it was because I was running on 2.2.1 kernel and I downloaded 2.3.340 Kernel Updater (2.6.32.9-g55626e1) and BP_C_1.09.07P Baseband Updater (also known as your radio file) from http://www.mydroidworld.com/forums/...ystem-baseband-2-3-340-kernel-bootloader.html then I installed both of those, now when I boot up to the Bootloader 30.03, it says, err:A5,70,00,00,23 Battery OK OK to Program Connect USB Data Cable. The phone also lets me boot in to the stock recovery by pressing Power and Home. Please help me I need help and I cant figure it out.
You should be on Bootloader 30.04. I would suggest grabbing the full .320 SBF, and the system-only .340 SBF, then flashing them both in order. After flashing them both go into the Motorola recovery and do a factory reset.
-----
Sent from my Droid X. Powered by Big Red, customized by NATF.
How do I do the SBF thing if I can only get in to the Bootloader 30.03 screen and the stock recovery screen. I have the clockwork recovery installed but i cant get to it. HELP
SBF is done from the bootloader menu you are already in. This link will help you with the process. If you are still on the original Froyo OTA, you will need the .320 Full SBF, and the .340 System-Only SBF. I cannot provide links to them due to a C&D notice, but they are not hard to find using Google.
Alright I need to put the phone back to stock 2.2, yet at the same time when I do attempt to reflash the device using RSDLite and a 2.2 .sbf...I end up with a Droid X that is stuck on the red M logo. Any way out of this? I've tried doing a factory reset, but no dice.
Did I flash the wrong .sbf file?
EDIT: Tried flashing a previous version that's incompatible with the stock 2.3.34 .sbf. Whoops... :facepalm:
So just to be clear, I'm fully aware of the locked bootloader fiasco which makes it impossible to downgrade from 30.04 to 30.03 -- therefore downgrading to 2.3.15 impossible due it being on the 30.03 bootloader.
However, after looking around for a couple days I've been unable to find a clear answer to the following: is the bootloader -alone- the sole reason why downgrading is not possible?
I bring this up because I have a non US/VZW Droid X, which when launched, came with 2.3.15 on the 30.04 BL. As it turns out, this SBF was released, which should mean this is a stock 2.3.15 SBF with the 30.04 BL.
So back to my original question: If this stock SBF has the 30.04 bootloader, is there anything else that would prevent downgrading from 2.3.340 to 2.3.15?
TIA.
ok, so i have a defy i rooted it and tried to change boot logo and i misplaced the file and it wouldnt turn on or boot.
so i plug it into my pc and it is recognised by rsd lite and a white led shows up on my defy.
i go to flash a rom and it doesnt work.
it turns the little green picture red and then fails.
Any chance of me being able to actually getting it to work.
i have resarched loads of ways and nothing seems to help, hence why i posted here. thankyou
ROM (in a zip file) or SBF file? RSD Lite will only accept SBF files!
If you are using a SBF file, is the CG version greater than or equal to what you had before? For example you can't flash a Froyo SBF after flashing Gingerbread.
i used the .SBF
i was on froyo trying to flas another version of it, so i need flash a gingerbread rom?
can anyone else give me a hand?
Does it have clock work mod recovery installed
no it doesn't, im guessing its screwed?
no your not, just flash the stock froyo image (.sbf file) with rsd lite and then erase data trough stock recovery and it should start normally
ps: i used this one
http://forum.xda-developers.com/showpost.php?p=14564962&postcount=13
hope it helps.
cheers
if this works your a baws
Install official Indian Froyo 2.2.2 from http://www.mirrorcreator.com/files/HRXSSAXE/ using RSDLite if you have not installed any new version of 2.3 GB
popcorn1122 said:
Install official Indian Froyo 2.2.2 from http://www.mirrorcreator.com/files/HRXSSAXE/ using RSDLite if you have not installed any new version of 2.3 GB
Click to expand...
Click to collapse
muhahahahaha