But I'm having random freezes/crashes, especially when I watch an embedded youtube vid.
What's the best way to troubleshoot?
TIA,
Tx
Tx Redneck said:
But I'm having random freezes/crashes, especially when I watch an embedded youtube vid.
What's the best way to troubleshoot?
TIA,
Tx
Click to expand...
Click to collapse
Make sure when you flashed from the stock rom, you wiped data, wiped cache, and wiped dalvik cache. If not, do it and reinstall.
I didn't do that because I was afraid to loose apps that I already had and didn't know how to recover stuff once the flash is done.
try MyBackup Root
i'm about to find out how well it preforms after wiping and installing a new rom. i'll let you know.
so i went from liberated froyo fr008 to cm6-6.1.1 and it appears to have restored all my apps + data + settings as best it could considering its a little different from the sense system.
apps work, settings work. the app worked =D
I would like to have a clean install(see no ATT bloat) but not have to go through and configure everything. What's gonna be the most stable Rom?
Tx Redneck said:
I would like to have a clean install(see no ATT bloat) but not have to go through and configure everything. What's gonna be the most stable Rom?
Click to expand...
Click to collapse
Based on your original post, since you are rooted and running FR008, then you already have a very stable ROM with HTC Sense and does not have any AT&T bloat on it.
It looks like the mistake you made as far as stability goes is that you did not perform a Wipe Data/Factory Reset before you flashed FR008 in hopes of keeping your apps and settings. I suggest you bit the bullet and do a Wipe Data/Factory Reset and then reinstall your apps and you'll have a very STABLE environment.
Lemme ask this, right after rooting and running nandroid, I pulled the the sd card and copied its entire contents(at east as much as Win would "see", not sure about any additional partitions) to my lappy.
If I do a clean install by wiping all factory data, cache partition and dalvik, will I be able to restore any items from that copy I made?
Please forgive me for teh newb questions. I can fix a puter all day long, this android stuff is greek to me.
Tx Redneck said:
Lemme ask this, right after rooting and running nandroid, I pulled the the sd card and copied its entire contents(at east as much as Win would "see", not sure about any additional partitions) to my lappy.
If I do a clean install by wiping all factory data, cache partition and dalvik, will I be able to restore any items from that copy I made?
Please forgive me for teh newb questions. I can fix a puter all day long, this android stuff is greek to me.
Click to expand...
Click to collapse
If you did a nandroid backup to your SD card, yes nandroid has an advanced restore option where you can selectively restore different partitions from the backup, such as boot, system, data, cache, etc. although I have never tried it.
Rooted last night with the Liberated FR008 rom and everything seemed to go smoothly, now though my browsers won't stay open. If I try to go from a link in an email the browser will open then close, pretty much same thing when I just open the browser. Any ideas why this is happening?
Phone: HTC Aria
Browsers tried: Default, Dolphin HD, xScope
Related
Hello guys.
I would really appreciate an answer to a question I have.
I installed leedroid 3.0.2 and I have the same apps and settings as before.
I think I haven't done a good wipe..
I rebooted to recovery from cwm and used the wipe before I installed the new Rom. (i was using the revolution 3.5 before)
After I installed the new Rom, when I booted on, all apps and settings were there.
Shouldn't the wipe thing clean everything and leave the phone "empty"?
Or, (most obvious) did I do something wrong and should do it again? Cause there is a little thing with the market that closes the process when I click on new released apps.
Thank you in advance guys.
Cheers !!!
Sent from my LeeDroid 3.0.2 Enhanced Desire HD
GeorgeKps said:
Hello guys.
I would really appreciate an answer to a question I have.
I installed leedroid 3.0.2 and I have the same apps and settings as before.
I think I haven't done a good wipe..
I rebooted to recovery from cwm and used the wipe before I installed the new Rom. (i was using the revolution 3.5 before)
After I installed the new Rom, when I booted on, all apps and settings were there.
Shouldn't the wipe thing clean everything and leave the phone "empty"?
Or, (most obvious) did I do something wrong and should do it again? Cause there is a little thing with the market that closes the process when I click on new released apps.
Thank you in advance guys.
Cheers !!!
Sent from my LeeDroid 3.0.2 Enhanced Desire HD
Click to expand...
Click to collapse
Are you wiping data and cache in recovery?
"wipe data/factory reset"
It will then say:
Code:
-- Wiping data...
Formatting /data...
Formatting /cache...
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
Data wipe complete.
Then:
"wipe cache partition"
It will say:
Code:
-- Wiping cache...
Formatting /cache...
Cache wipe complete
(second option is overkill)
Have you still got the setting to backup to Google servers ticked? Or any other app that you have backed things up with?
Whilst the last option wouldn't be instant (they would download again and take a good 5 minutes to appear).
And yes, you will probably experience issues if this is due to a missed wipe.
So, I will need to do a factory reset first, then do a cache wipe and then install the Rom?
(i don't remember doing all these for the revo Rom..)
Do I need to do these without rebooting the phone until everything is done?
Cheers !!!
Sent from my LeeDroid 3.0.2 Enhanced Desire HD
GeorgeKps said:
So, I will need to do a factory reset first, then do a cache wipe and then install the Rom?
(i don't remember doing all these for the revo Rom..)
Do I need to do these without rebooting the phone until everything is done?
Click to expand...
Click to collapse
Yes, you should always do the "wipe data/factory reset" before installing any new ROMs or if the dev has advised it, also between major update revisions.
You don't need to reboot. If using recovery to install the ROM just do the wipes then flash the ROM using menu.
Awesome. Thanks for the help.
Will try it now and I hope everything goes well. Hope I won't get stuck since am not in front of my pc.
Cheers !!!
Sent from my LeeDroid 3.0.2 Enhanced Desire HD
Well, I did it again. Everything wiped out, started as new.
But still, new apps in market and battery history in spare parts give me a process termination...
Oh well, I guess that Lee will release an update.
Oh, something else I would like to ask. There is a new kernel for the Rom. Do I flash it the same way I flash everything? Through recovery?
Thanks again guys
Cheers !!!
Sent from my LeeDroid 3.0.2 Enhanced Desire HD
I use Leedroid and don't have this problem. Today I have installed from scratch and gone back and forth between ROM's. i turned off all the processes that backup and restore apps and I get a blank fresh install.
I have to ask, the last time you installed Leedroid, did you use the downloaded one or a copy from your sdcard? is it possible you are restoring a copy rather than flashing a fresh copy?
And you don't have any apps that have backed up your apps such as Titanium? And you have turned off Google Backup and restore feature?
The thing is, it is handy not to lose data but we need to make sure your wipe is being done. Did you see the same messages in Recovery as I showed above?
gosh, it is sooooooooooooo weird...
i did it all again. factory reset, delete cache, installed the 3.0.3 version (which was released today).
everything seemed to go smooth. still, i went to market and clicking on the newly released apps list i get an error which is "com.android.vewnding" has been shut blah blah blah. and the same happens to spare parts. when i click battery history ""com.android.spare_parts" shuts down.
do you guys think it has to do with the kernel? should i flash lee's kernel (i couldn't find how to. i mean, shall i do it from the cwm recovery?)
i guess that the radio has nothing to do with all these, does it?...
thank you guys once again for your help
Cheers !!!
GeorgeKps said:
gosh, it is sooooooooooooo weird...
i did it all again. factory reset, delete cache, installed the 3.0.3 version (which was released today).
everything seemed to go smooth. still, i went to market and clicking on the newly released apps list i get an error which is "com.android.vewnding" has been shut blah blah blah. and the same happens to spare parts. when i click battery history ""com.android.spare_parts" shuts down.
do you guys think it has to do with the kernel? should i flash lee's kernel (i couldn't find how to. i mean, shall i do it from the cwm recovery?)
i guess that the radio has nothing to do with all these, does it?...
thank you guys once again for your help
Cheers !!!
Click to expand...
Click to collapse
You have tried fix permissions in ROM Manager, yes?
eeeeeeeeeerm.... you got me. that is something i totally forgot to do :-(((
gosh.. i flashed the radio, sweet. tried to flash a kernel using jkoljo's tool and it stayed on the white screen (and of course cold sweat was all over the place )
but i flashed the rom again after clearing cache and the likes and (thank god) i'm in.
but the most weird thing is that, after all these, the kernel is flashed :-S
i checked in the phone info and the kernel is there..
anyway, am gonna do the fix permissions thingy and reflash once more. if it stays the same way, i'll have to live with it. it's late here in greece.
thanks again for your help guys, i really appreciate it )))
Cheers !!!
i did it all again but nothing happened.
did the permissions, rebooted to recovery, factory reset, cache wipe, install new rom and nothing.
i have to tell you guys though.. the problem with the market started when i was on the revolution rom. and it started just like that. one day everything was fine, next, bam. it didn't budge.
do you think there might be something wrong with the phone itself? (probably not and i'm paranoid)
other than that, everything works nice.
oh, and some other thing. there is this "full wipe 1.3" zip i had put in my SD card but never really used it.
should i use it this time?
this app should clean everything in the cache but not my files, right?
Cheers !!!
YouTube clip of how to manually full wipe everything.
http://www.youtube.com/watch?v=fCwr6Ru0yko
When using this method I've never had a problem.
Sent from my HTC Desire HD using XDA App
I did the wipe as shown in the video. The problem remains the same. New market apps list gives an error followed by a restart of it and spare parts battery history does the same (without the restart though)
I don't know, I'm thinking of trying a different Rom even though I like the one Lee released.
(could all this mean that I have a problem with the phone?.......)
Anyway, thank you guys for spending time helping me.
Cheers !!!
i started noticing that after i flashed a new rom, alot of my settings are set to the way i had them before. and some apps are already installed that would otherwise need a marketplace install..
keep in mind, i always do a wipe of cache/dalvik/sdcard
i think it started happening after i partitioned the sd card for those old sense roms that needed extra space.. cant remember..
but it seems like theres a portion of rom that isnt being wiped and all my settings are being carried over to the next rom flash..
how can i fully wipe my phone or get it back to normal?
this is weird, and i want it to stop. any ideas?
i just flashed back to amonra
TorxT3D said:
i started noticing that after i flashed a new rom, alot of my settings are set to the way i had them before. and some apps are already installed that would otherwise need a marketplace install..
keep in mind, i always do a wipe of cache/dalvik/sdcard
i think it started happening after i partitioned the sd card for those old sense roms that needed extra space.. cant remember..
but it seems like theres a portion of rom that isnt being wiped and all my settings are being carried over to the next rom flash..
how can i fully wipe my phone or get it back to normal?
this is weird, and i want it to stop. any ideas?
i just flashed back to amonra
Click to expand...
Click to collapse
Are you using ROMs that have Google back up enabled?
Also, if the zip isn't set to wipe /data and you're not wiping it then you'll still have all of your data.
That has happened to me too. Are you wiping sdext and android.secure in recovery. I always wipe those and haven't had that happen since I started doing that.
We're comin from a pure power source.
naw i turn off all that google backup stuff.
thats the thing, when i try to wipe sdext it gives me an error (from the last i remember doing it)
Hmmm. Latest version of amon ra?
We're comin from a pure power source.
keep in mind, i always do a wipe of cache/dalvik/sdcard
Click to expand...
Click to collapse
You should be wiping data as well when flashing new roms.
I flash vrsuperwipe everytime I flash, but I use Google backup, so when I flash a new sense ROM it saves a lot of my settings, and my SD-ext apps automatically appear. Good feature imo.
Sent from my PC36100 using Tapatalk
bump for any other answers or advice
thanks guise.
still wondering about other options before testing some new roms
same thing happened to me so I tried repairing sdext and then re-partitioned my card and left it ext2 instead of ext3,wipe data/cache/dalvik cache/system flash superwipe, then flashed rom. don't know which one worked but it stopped. Also I noticed it mainly happens when I flash 3.0 roms but it has happened on CM7 to
TorxT3D said:
i started noticing that after i flashed a new rom, alot of my settings are set to the way i had them before. and some apps are already installed that would otherwise need a marketplace install..
keep in mind, i always do a wipe of cache/dalvik/sdcard
Click to expand...
Click to collapse
You did not wipe data. If you do this you will preserve all of you apps (if they were not on card), data and system settings. This may work for you if the new ROM that you are moving to is similar enough. It can cause big problems if the structure of the ROMs is too different. You can end up with a phone that lags and has wakelocks (at best) or is not functional at all due force closes all over the place.
You should really wipe data as well before flashing a ROM and then do a selective restore of data on the new ROM.
I have a T-Mo G2 and want to keep my Froyo image to reinstall later if I cannot get theGingerbread to work right. I want to make an image file that will restore the phone to exactly how it is now. I have tried all kinds of stuff, but am not able to make the "img" file so that I ca do a restore when booting...
Can someone point me to what I need to install to do this, and if possible some directions on what/how to create the "img" or restore file ?
I would be most appreciative, as I had to reverse everything from the OTA of Gingerbread, since too many apps didn't work, ESPECIALLY the GPS!
My current Froyo is a temp-root system.
Thank you all!
Aloha. .
I would do full root via the wiki, and then install 4EXT (the full one that's like $2) - it will keep your old stuff straight
Ditto on previous reply
Root your G2
Backup all your apps with using Titanium backup
Get Clockwork mod ROM manger or 4ext ( I prefer 4ext) and backup your stock rom. You can download new ROM CM7 for first ROM.
If you don't like the ROM you can restore your stock ROM with CWM or 4ext at anytime.
I have a theory that Ti Backup or any backing up of apps is a bad plan. I know you can do it no problem, and that it is a great time saver, but I have a strong feeling that this ultimately results in an unstable phone with mysterious force closes etc.
Even though it's a real pain, I think you are always better off reinstalling your apps from scratch after changing to a new ROM and wiping caches.
WTF? said:
I have a theory that Ti Backup or any backing up of apps is a bad plan. I know you can do it no problem, and that it is a great time saver, but I have a strong feeling that this ultimately results in an unstable phone with mysterious force closes etc.
Even though it's a real pain, I think you are always better off reinstalling your apps from scratch after changing to a new ROM and wiping caches.
Click to expand...
Click to collapse
1. I have had zero problems with TB personally.
2. Without it your app data is gone.
3. Triple wipe, takes a few extra minutes and makes a world of a difference.
4. Do not restore system data!
5. Check md5 sums BEFORE doing anything!!!!
6. Make sure you have a recent nandroid backup and you'll be fine either way.
7. triple wipe before flashing anything including nandroids. Preferably with different wipes aka factory reset, superwipe+ ext4, then recovery wipe!
Just my 2 cents, it's saved my a$$ more then a few times...
After updating to 3.01 ...occassionally my power button does not turn screen on, keyboard lights up, but screen will not come on...have to pull battery...anyone else??
No problems here. That kernel is kickin ass on my phone. A clean install, wipe cache dalvik and data, will alleviate 99% of those quirky problems.
Backup your apps and data thru titanium backup
Go to cwm
wipe cache
wipe dalvik
wipe data
Install ROM
Install kernel
if your installing a theme, wipe cache and dalvik again, probably not necessary, but it won't hurt, then install theme.
Reboot system
Go on the market, and get your apps, especially Titanium Backup.
Try to restore your apps back thru Market rather than titanium, this ensures that your apps are not corrupt in some way. If there are certain apps that for one reason or another are no longer available from Market but you absolutely gotta have it. Restore it from titanium.
Restore data from Titanium, but only whats absolutely necessary.
Sometimes things get corrupted when flashing over and over and the above method works everytime to get it back solid and glitch free.
Restore only the data
Xalky said:
No problems here. That kernel is kickin ass on my phone. A clean install, wipe cache dalvik and data, will alleviate 99% of those quirky problems.
Backup your apps and data thru titanium backup
Go to cwm
wipe cache
wipe dalvik
wipe data
Install ROM
Install kernel
if your installing a theme, wipe cache and dalvik again, probably not necessary, but it won't hurt, then install theme.
Reboot system
Go on the market, and get your apps, especially Titanium Backup.
Try to restore your apps back thru Market rather than titanium, this ensures that your apps are not corrupt in some way. If there are certain apps that for one reason or another are no longer available from Market but you absolutely gotta have it. Restore it from titanium.
Restore data from Titanium, but only whats absolutely necessary.
Sometimes things get corrupted when flashing over and over and the above method works everytime to get it back solid and glitch free.
Restore only the data
Click to expand...
Click to collapse
Thanks,
Should have provided more pre-info...did the wipe davlik and cache thing as normal. Have moved between the voodoo and samurai kernel and OP problem is the first I have encountered. Thinking about going backl to Sam 2.08...no problems there. thanks again for the speedy help!
Yep,
3.01 is amiss ...went back to 2.08 and all is fine now... on the development forum it looks like other users of 3.01 are experiencing the same problem...
Naddict said:
Yep,
3.01 is amiss ...went back to 2.08 and all is fine now... on the development forum it looks like other users of 3.01 are experiencing the same problem...
Click to expand...
Click to collapse
I am using Samurai 2.0.8 as well with absolutely NO problems
The screen not coming on is a wakelock.... your cpu doesn't like the 100mhz step which means you need to get that unchecked in voltage control unselecting it that should fix the wakelock...maybe ^^
Sent from my OG Epic
Thanks Biggoron, I saw a post about that issue somehwere and I turned off the 100mhz step in voltage control...still had the issue and, as I mentioned earlier, am seeing other users still having the problem with all three 72mhz versions....interesting....I have always been a lurker and never contributed...so now I am working on my 10 posts just so I can at least offer my observations. Thanks again
Figured it wouldn't of changed anything thus the ....maybe^^
Hopefully earthbound will figure out the issue have you tried any of the 60hz versions to see if it still occurs?
Sent from my OG Epic
No,
I went back to the Voodoo kernel (1.01oc/uv), it has been pretty stable, and so was Samurai 2.08....
No problems with 2.08 or 3.01 power button, even running at 100 mhz. However, my rotation lag came back not sure if it's the rom (Marcusant's v1) or the kernel, or something else... it seems the only issue so have to live with it.
for what iti is worth, I also noticed a little "lag" or interuption in my notification sounds with 3.01...but that is all behind me now. sticking with voodoo 1.01 for now. seems to be the most stable other that nube's...anyone know when he is putting up a new kernel?
Hi all,
I have learned a lot about Android customization in the last week since my Nexus 4 finally arrived at my door, and I have become reasonably comfortable with the processes of flashing ROMs/kernels, and backing up my phone to make sure I have something stable to return to if something happens to go wrong. However, I am still dealing with a few points of confusion that I was hoping someone could clarify for me:
1. I have CWM installed on my phone and I can use it to backup/restore images of my phone for safety. However, I have heard about other methods like Nandroid, Carbon/Helium, and Titanium Backup while browsing the forums, and have tried them only to become confused as to how they are different from using CWM backup. Could someone please explain this to me and clarify which is the best for keeping a backup of my phone stored on my computer?
2. I have noticed that when I "wipe date/factory reset" in CWM, not everything on my phone is wiped. There are still plenty of files left over from previous ROM installs when I browse my phone with Android File Transfer, and obviously the .zip files you need to flash new ROM's/kernels are left too. What exactly is deleted when do a CWM factory reset?
3. Is it necessary to wipe everything when installing a custom kernel? I have CyanogenMod 10.2 installed because it is quick and relatively bloat-free, but allows for enough customization that I can make the my phone feel the way I want it to. I want to give Matr1x/Hells-core a try, but I am tired of factory reseting everything when install a new kernel. Can I get away with just wiping Cache/Dalvik and flashing the new kernels? If not, what is the best way to avoid losing app data between ROM and kernel flashes?
4. What is the difference between the default Android superuser, CWM superuser, and SuperSU? They all seem like the same thing and it makes me nervous installing different ones.
Any information you guys can offer would be great. Thank you so much for your time !
Downloaded7 said:
Hi all,
I have learned a lot about Android customization in the last week since my Nexus 4 finally arrived at my door, and I have become reasonably comfortable with the processes of flashing ROMs/kernels, and backing up my phone to make sure I have something stable to return to if something happens to go wrong. However, I am still dealing with a few points of confusion that I was hoping someone could clarify for me:
1. I have CWM installed on my phone and I can use it to backup/restore images of my phone for safety. However, I have heard about other methods like Nandroid, Carbon/Helium, and Titanium Backup while browsing the forums, and have tried them only to become confused as to how they are different from using CWM backup. Could someone please explain this to me and clarify which is the best for keeping a backup of my phone stored on my computer?
A backup in CWM is the same as a nandroid backup. It basically take a "snapshot" of your ROM and restore it exactly as it was when backing up.
Titanium Backup is an app that backup your apps and app's data. It's recommend you only restore user's apps and data. Let Google restore any system app's data.
2. I have noticed that when I "wipe date/factory reset" in CWM, not everything on my phone is wiped. There are still plenty of files left over from previous ROM installs when I browse my phone with Android File Transfer, and obviously the .zip files you need to flash new ROM's/kernels are left too. What exactly is deleted when do a CWM factory reset?
Wiping data/factory reset only wipe the data. Wiping system will wipe your ROM (system partition) Of course you don't want to wipe all the files such as the ROM you're going to flash.
There's an option to format internal sd, that will wipe EVERYTHING so unless you know how to ADB push files or sideload a ROM, DO NOT touch that.
3. Is it necessary to wipe everything when installing a custom kernel? I have CyanogenMod 10.2 installed because it is quick and relatively bloat-free, but allows for enough customization that I can make the my phone feel the way I want it to. I want to give Matr1x/Hells-core a try, but I am tired of factory reseting everything when install a new kernel. Can I get away with just wiping Cache/Dalvik and flashing the new kernels? If not, what is the best way to avoid losing app data between ROM and kernel flashes?
No, just flash kernel. Some recommend wipe cache and dalvik cache after kernel flash before reboot.
4. What is the difference between the default Android superuser, CWM superuser, and SuperSU? They all seem like the same thing and it makes me nervous installing different ones.
Different app that does the same thing. Usually go with what is recommend by the ROM's dev. I ususally just leave what's included with the ROM.
Any information you guys can offer would be great. Thank you so much for your time !
Click to expand...
Click to collapse
Hope that answer some of your questions. I'm sure I left out some stuffs so hopefully someone else can add to it.:good: