Related
Hi, i have been looking through some of the rooting, flash threads on here and there is a bit too much information,lol.
Can anyone detail the basic steps, software required to roll my X10 back to the 1.6 OS?
I am still having connectivity issues when trying to use the handset in the car.
The vehicle manufactures website shows that the Xperia X10i is compatible with their factory fitted handsfree systems, but only on OS 1.6.
1. Download this and extract in any folder of your computer:megaupload.com/?d=HCWX4KO3 (The credits of this goes for its creators)
2. Open the folder that its named 1_firmware and in the fileDeviceID.txt copy yours, save and close. (This is the same as the one used on the flashtools of Bin4ry)
This is how you can get your DeviceID on Windows: (Again thanks tojimbo77)
2.1: Connect your phone to the computer on the USB port you are going to use to flash it.
2.2: Press start (or windows icon) and in the run box type regedit
2.3: Click edit>find, and type in Vid_0fce&Pid_adde. You should find "DeviceInstance". If that fails, make sure Match whole stringis un-ticked, and click find next or press f3, if that fails, tryUSB\VID_0FCE&PID_ADDE. Copy the last section of that, it should look something like "5&2888d0ff&0&1".
Note: It changes with every diffrent USB port you use....3. Download your Firmware, extract it and copy all the files on it to the 1_firmware folder. You don't have to erase anything from this folder, unless you got the message to replace a file.
4. Now run the RootX10a_v2.cmd and select step 1 and follow the instructions. If done correctly you will see a window that starts to write and write and write a lot of things. This process will take around 5 minutes, so be patient. (It is like if you were flashing your phone)
5. Turn your phone on and wait until you get the configuration screen.
6. Now connect the phone to the PC and run PC Companion or SEUS. If it shows that there is a new software for your phone, follow the instructions and update if you want.
7. Enjoy your phone on Android OS 1.6 or 2.1 with your operator
Thank you on anticipation to any help offered.
I have had a look here, but am not 100% if this is all that i need to do?
Sorry, not able to post the link, being a new user.
The one part that is not clear to me is where they say, "Open the folder that its named 1_firmware and in the fileDeviceID.txt copy yours, save and close"
What is it that im supposed to copy?
No.. no...
You need the flashtool and the 1.6 files..
I cant seem to find the 1.6 files...
Why do you need 1.6?
SE seem to have done something with the update 2.1 where the phones Bluetooth will connect to my vehicle, but only for about 40 seconds, then removes its self and then re attaches, then removes its self again and this goes on for the duration the handset is in the car with me.
The handset i have just now was a replacement for my original and came with the 2.1 OS already updated.
The original 1.6 OS that was on the phone connected to my vehicle and gave me phonebook access.
I have neither now hence why i wish to roll back to the software that is compatible with my vehicles system. 1.6 buildR1FA016 Kernel 2.6
Get your phone rooted, load Xrecovery.
and flash Wolfbreaks CM rom.
And watch the magic.
OmegaRED^ said:
Get your phone rooted, load Xrecovery.
and flash Wolfbreaks CM rom.
And watch the magic.
Click to expand...
Click to collapse
Thanks for the above, but can you break this into more simple instructions, links etc as this is way above me. I'm not totally useless, but i have never done anything like this, so it is all double dutch to me at this point in time,lol.
Download the flashtool from androxyde's thread then follow the instructions to flash the latest FW, then reboot your phone plug it in and press root on the flashtool and then reboot and install XRecovery and use it to install a custom ROM by following the directions in a ROM thread.
Just start by reading the Flashtool thread.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
CMoney87 said:
Download the flashtool from androxyde's thread then follow the instructions to flash the latest FW, then reboot your phone plug it in and press root on the flashtool and then reboot and install XRecovery and use it to install a custom ROM by following the directions in a ROM thread.
Just start by reading the Flashtool thread.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Click to expand...
Click to collapse
Had a read at the flash tool thread and even more confused now, too much information and no understanding of what it all means.
I am looking for someone who can supply links to what i actually need to roll the phone back.
What software do i require.
Do i have to root the phone and if so, how do you do this?
I did say in the thread title an "Idiots Guide". Simple and straightforward instructions that a first timer can comprehend, similar to the text in my first post, bullet points?
Thanks.
Bonzo67 said:
I am looking for someone who can supply links to what i actually need to roll the phone back.
What software do i require.
Do i have to root the phone and if so, how do you do this?
I did say in the thread title an "Idiots Guide". Simple and straightforward instructions that a first timer can comprehend, similar to the text in my first post, bullet points?
Thanks.
Click to expand...
Click to collapse
Dude.. all the threads have the answers.
Read abit it won't kill you.
OmegaRED^ said:
Dude.. all the threads have the answers.
Read abit it won't kill you.
Click to expand...
Click to collapse
I did and it's version this and version that. So which version is it that i actually need without screwing up my phone?
Suppose i'm more looking for something along the lines of what you would get if you downloaded a torrent file, where everything is in the one folder, inc the instructions.
Anyway, hopefully problem is sorted, as i am ditching SE after 10 years of using their handsets and going to Samsung which is compatible with my vehicles factory fitted system.
Bonzo67 said:
I did and it's version this and version that. So which version is it that i actually need without screwing up my phone?
Suppose i'm more looking for something along the lines of what you would get if you downloaded a torrent file, where everything is in the one folder, inc the instructions.
Anyway, hopefully problem is sorted, as i am ditching SE after 10 years of using their handsets and going to Samsung which is compatible with my vehicles factory fitted system.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1060703
I hope this rom can hlep us make the DVP best!
I am so excited that is 7004
Thank for every one
I hope someone sotp the spread of this rom without my permission！！！
IF you want to knew more about DVP you can gou to [email protected]/forum-27-1.html
You can also join the QQ GROUP 193983101,i can help you with dvp
It seems I have 7720...
Are you talking about ATT DVP?
snailium said:
It seems I have 7720...
Are you talking about ATT DVP?
Click to expand...
Click to collapse
sure
you can use it to make your phone back to 7004 and Jailbreak your phone
From opening up the rar, the file mentions:
"US_TMO_SIGNED"
Is there a different ROM for each US carrier?
In other words, the Venue Pro appears to be sold in the US only as an unlocked device, but there is a version for AT&T bands and a version for T-Mobile bands. Is the ROM the same for both, so this would work for both?
jhoff80 said:
From opening up the rar, the file mentions:
"US_TMO_SIGNED"
Is there a different ROM for each US carrier?
In other words, the Venue Pro appears to be sold in the US only as an unlocked device, but there is a version for AT&T bands and a version for T-Mobile bands. Is the ROM the same for both, so this would work for both?
Click to expand...
Click to collapse
ALL DVP can use this rom
So is this ROM the missing link we needed to hack the DVP or do we gain nothing lol
We need a full image dump and not a backup file. And yeah. This is likely the only way to hack the phone.
MJCS said:
We need a full image dump and not a backup file. And yeah. This is likely the only way to hack the phone.
Click to expand...
Click to collapse
isnt "webseraph" claiming this to be the Image?
raiderfan247365 said:
isnt "webseraph" claiming this to be the Image?
Click to expand...
Click to collapse
From what I saw, it's an .ffu file, which it's my understanding that this is a full firmware image.
I would need the link again to verify but last time it was a backup.
Does this mean .....
MJCS said:
I would need the link again to verify but last time it was a backup.
Click to expand...
Click to collapse
Hey guys, does this mean I can unbrick my dvp ?
It's been sitting there for ages and I have went out to buy a omnia 7 but I really love the phone.... .... please keep me posted and tell me how to upload the image onto the phone so I have a working firmware again ^_^.
PM me or whatever ^_^
I'm so excited, DVP is no longer a dead phone and can have developments ^^
hihi2u2 said:
Hey guys, does this mean I can unbrick my dvp ?
It's been sitting there for ages and I have went out to buy a omnia 7 but I really love the phone.... .... please keep me posted and tell me how to upload the image onto the phone so I have a working firmware again ^_^.
PM me or whatever ^_^
I'm so excited, DVP is no longer a dead phone and can have developments ^^
Click to expand...
Click to collapse
does anyone have the image file and can post it to a standard upload service (mediafire, fileserve, etc.). webseraph where did the link go?
I've got it saved on my computer at home, I can reupload it later tonight if people still need it by the time I get home. It came with a bunch of Eastern-language files, Chinese or Japanese I believe, old versions of x86 Zune software, old versions of x86 drivers, and the .ffu file.
Since I believe the .ffu is the ROM itself (hopefully not a backup, I don't know much about this stuff and my Dell Venue Pro that I decided to order is still with Fedex), I'll just upload that, and anything else can be sourced at a million other locations.
Thanks ! !
jhoff80 said:
I've got it saved on my computer at home, I can reupload it later tonight.
Click to expand...
Click to collapse
Thanks, looking forward to it ... ... btw can you give some guidance as to how to flash the phone with the firmware ?
hihi2u2 said:
Thanks, looking forward to it ... ... btw can you give some guidance as to how to flash the phone with the firmware ?
Click to expand...
Click to collapse
I updated my previous post, I've got no idea. The instructions weren't in English and I don't even have a WP7 device (yet). I believe it would involve using UpdateWP.exe though.
cheers ^^
jhoff80 said:
I updated my previous post, I've got no idea. The instructions weren't in English and I don't even have a WP7 device (yet). I believe it would involve using UpdateWP.exe though.
Click to expand...
Click to collapse
It'll be nice to have a look at it anyways, thank you sooooo much !
Can you upload the file somewhere? I would like to disect it.
Here's a repost of only the .ffu from the original post:
http://www.multiupload.com/5YT27EHLZV
The original rar also contained instructions in Chinese, plus other folders:
1 start, which included the VC redist files
2 Zune 4.7, (x86 only)
3 ZuneDesktop UpdateTool 1404, (x86 only)
4 Tool FFU _FinalCheck_CheckPVK, which I believe is just a wrapper to run the UpdateWP.exe command I mention below. If anyone wants this folder too, let me know.
5 FFU-Deploy, which contained only the .ffu file I zipped up and reposted.
From my brief research into the matter, it appears that you can use Zune 4.7 with an older UpdateWP.exe with the following command:
UpdateWP.exe /ffu <filename>
Zune 4.7 and the older UpdateWP.exe are available all over so I didn't bother uploading those.
Machine translation of instruction file:
Brush process
Computer system XP SP3 (win7 system similar)
By folder order in 1234 to install
A: Click the folder to install the three files in 1 start
B: Download and install this zune4.7 me
C: install about 3 ZuneDesktop UpdateTool 1404 folder in the Setup-UpdateWP-x86.exe
D: Open the folder 4 Tool FFU _FinalCheck_CheckPVK in the file FFUDownload_ShareU.exe,
Tap Browse, find the 5 FFU-Deploy folder of the Rom file
Then began to brush machine,
1 cell phone off, remove the battery
2 believe the key to holding down the data cable to the computer
3 Wait a moment, the computer will automatically find the drivers. (Note to zune off, preferably in the Task Manager in the zune process off)
4 drive automatically installed after the point about brush machine software in the download, and then will begin to brush machine, brush machine program into the background of green.
After a good brush, the phone will automatically restart, like, Brush some tips that appear on the software window, all the way to determine the fine.
Brush, do not pull the data line.
Click to expand...
Click to collapse
Again though, this isn't my file, and I haven't tested it, so don't blame me if something goes wrong.
time to do some reading ^^
jhoff80 said:
Here's a repost of only the .ffu from the original post:
http://www.multiupload.com/5YT27EHLZV
The original rar also contained instructions in Chinese, plus other folders:
1 start, which included the VC redist files
2 Zune 4.7, (x86 only)
3 ZuneDesktop UpdateTool 1404, (x86 only)
4 Tool FFU _FinalCheck_CheckPVK, which I believe is just a wrapper to run the UpdateWP.exe command I mention below. If anyone wants this folder too, let me know.
5 FFU-Deploy, which contained only the .ffu file I zipped up and reposted.
From my brief research into the matter, it appears that you can use Zune 4.7 with an older UpdateWP.exe with the following command:
UpdateWP.exe /ffu <filename>
Zune 4.7 and the older UpdateWP.exe are available all over so I didn't bother uploading those.
Machine translation of instruction file:
Again though, this isn't my file, and I haven't tested it, so don't blame me if something goes wrong.
Click to expand...
Click to collapse
ACE will try it out ^^
Actually, can you upload the whole original .rar cause I can read chinese and want to flash my phone anyways cause its bricked so I just want to see if this will help and it looks like i need the whole package in order to do so ^^
The FFU works. It is 7704 and it is amazing how much Windows Phone 7 has advanced. Now the trick is to find a way to install an exploit before Mango that sets the interop unlock at every boot or something and then find a way to restore a backup. I am not really sure how the backup/restore process works. It did require me have the latest updates before restoring so it is possible it just restores non /windows files and folders. So if we can find something in the system that can provision the provxml files then we are golden. The problem is I have no idea what would do that in the system. If you dare to do what I just did, make sure you have a back up and a backup of that backup stored elsewhere as you never know if zune will delete your backup.
Sup everyone,
I finally got around to updating my TMO DVP. It's been stuck on 7720 this whole time and want to bring it up to Tango.
My question is: what exactly are the steps to upgrading???
Here are the threads I'm trying to follow in order:
http://forum.xda-developers.com/showthread.php?t=1103011
http://forum.xda-developers.com/showthread.php?t=1497142&nocache=1
http://forum.xda-developers.com/showthread.php?t=1736993
From what I understand it:
Install Windows Phone Support Tool
Install WP7 Backup 1.6
Install WP7 Update Cab Sender
Then???
I don't get it. I've installed WP Support tools which doesn't make sense. I have Win7-64bit. The downloads available are x86 or amd64. My computer is intel based, so which do I use? x86 doesn't install, makes sense. I installed amd64.
My next problem is, are there different versions of WP Support Tools? My Zune is up-to-date 4.8.2345.
After installing WP Support Tools:
WPSupportTools.exe is version 0.0.0.0, date modified 4/1/11
UpdateWP.exe is version 6.1.7600.16385 date modified 4/1/11
Microsoft.WindowsMobile.DeviceUpdate.dll is version 4.7.1404.3 date modified 4/1/11
When I run WP Support Tool, I get:
UpdateWP version 4.7.1404
Error: The installed version of the tool (4.7.1404) needs to be updated to match the Zune version (4.8.2345). Please install the tool version 4.8.2345.
Click to expand...
Click to collapse
What do I do?
UpdateWP.exe Information: 0 : 12/25/2012 12:48:25 AM: Device Manager Initializing
UpdateWP.exe Information: 0 : 12/25/2012 12:48:26 AM: Device Manager Initialized
UpdateWP.exe Information: 0 : zune-tuner://windowsphone/5e7a3cc3%20-%20ebd23705%20-%202fd2d1be%20-%20b9b323c8
UpdateWP.exe Error: 0 : 12/25/2012 12:48:26 AM: Update Exception: System.Runtime.InteropServices.COMException (0x801812C0): Exception from HRESULT: 0x801812C0
at Interop.ZuneWmduLib.WmduFirmwareUpdaterClass.StartFirmwareUpdate(IFirmwareUpdateCollection pUpdates, IFirmwareUpdateCallback pCallback)
at Microsoft.WindowsMobile.DeviceUpdate.Device.Microsoft.WindowsMobile.DeviceUpdate.IDevice.Update(String[] URIs, UpdateType UpdateType, Action`1 progressMadeCallback, Object context)
Click to expand...
Click to collapse
Log from when I got somewhere and nothing happened.
I've uninstalled and deleted everything. If anyone can help me out from square one it'd be much appreciated.
KnightmareCS said:
Log from when I got somewhere and nothing happened.
I've uninstalled and deleted everything. If anyone can help me out from square one it'd be much appreciated.
Click to expand...
Click to collapse
It's been a while since I did this. But you did right, AMD64 is correct. And try the file I attached as that's the newest version to match your Zune software. Let us know if you run into anything :good:
(and no, I didn't create the file. I just have it archived from a working cab sender upgrade so credits go to the original poster)
Ok,.
So I installed WP Support Tools.
Copied the files you gave into the Zune directory.
Copied WP7 Backup 1.6 into the Zune directory.
Tried running a backup.
Attached is the error message I got.
I tried the cmd method and that gave the same error.
GoodDayToDie said:
I ran into this issue too.
First question: Is your Zune install in the default location? The support tool installer seems kind of... stupid. It always installs in \Program Files\Zune even if Zune isn't actually installed there. You can copy the files from that location to wherever Zune is installed, if not. Be careful of overwrites.
Next question (really the important one, but the question above can be the reason for the problem): Is there a file called wm7updatelib.dll, or similar, in the folder with your UpdateWP.exe? If so, is it the same version (exactly, down to the build number)? If not, you may need to re-install the support tool (I suggest uninstalling it first, using appwiz.cpl).
Click to expand...
Click to collapse
Looking at this post.
I have wm7update.dll (not wm7updatelib.dll). It is file version 1.0.0.1 /product version 7.0.0.0.
Can you post the right library file?
Thanks
-
Attached are a list of my files and versions in Zune folder. (Ignore the dual Microsoft and UpdateWP, I just added garbage text to the originals)
Backing up now.
Copied the files attached.
wm7update.dll
Interop.wm7updatelib.dll
Interop.ZuneWmdulib.dll
BEASSSSSSSSST running 8773!
KnightmareCS said:
BEASSSSSSSSST running 8773!
Click to expand...
Click to collapse
Good work Glad to see you figured it out. Might want to share your experience if you ran into specific problems in case others have it?
Thanks.
All it was, was making sure I had the right file versions for the right files. Those of which I posted above.
aleunge said:
Good work Glad to see you figured it out. Might want to share your experience if you ran into specific problems in case others have it?
Click to expand...
Click to collapse
I've just update to 8773 myself as well. However, I want to ask you a question: whether we could re-write the firmware version also? My OS version is 7.10.8773.98, but firmware is 2250.1800.7720.219.
No idea. I noticed that too, but haven't seen anything about it just yet.
KnightmareCS said:
No idea. I noticed that too, but haven't seen anything about it just yet.
Click to expand...
Click to collapse
Yeah, maybe it's not necessary enough for us to consider that. However, I just noticed that while updating via Zune, this firmware version string is changed, but not with CAB sender. So, I just guess there might be a way to do it by ourselves too!
please note that the firmware package contains the bootloader drivers etc.etc.
Dell will probably not update those any more. The latest o.s. updates are provided by microsoft and they don't include any drivers whatsoever.
As long as the OS version is the most recent, you're good.
Has anybody managed to root android caska 4.4.2?
Thanks
Anyone?
It says:
mcu: v3.00h7_ca712_f7e1430
kernel: 3.0.36+
android 4.4.2
Thanks
Also looking for a way to root this HU too.
Why don't you just flash Malaysk's ROM? It's easier and the ROM is much smoother than stock.
War-Rasta said:
Why don't you just flash Malaysk's ROM? It's easier and the ROM is much smoother than stock.
Click to expand...
Click to collapse
I've never used Android, I'm a iOS user and very afraid to brick my unit. I just download ROM for 4.4.2 and boot it according to the instructions?
My unit shows:
MCU Version: V3.00F8_CA380_E55B_ECI1455
Build number: D200 Ver2.01 20141228.2309
TCON Version: V6.00_HSD80_EC28e
Many thanks for your help!
War-Rasta said:
Why don't you just flash Malaysk's ROM? It's easier and the ROM is much smoother than stock.
Click to expand...
Click to collapse
I actually tried a Malaysk's rom and It gave me error in the middle of installation. I had to return the original rom. Not quite sure if I used the correct malaysk's rom. I have a rk3066 android. 4.4.2
Hi Guys,
I also have a similar unit. Did you manage to make a backup of current image? I want to upgrade because I have two issue: sometimes the unit doesn't complete the startup and I can't use sygic navigator.
Build number: D200-20150713.2225-S1
Kernel version:3.0.36+
[email protected] #883
Tue Jul 7 10:43:52 CST 2015
MCU Version:V3.00H7_CA712_F7E1430
TCON Version:V6.00_HSD70_F77Hi
Media Version:89J_0025_000000
SN Number:UNKNOWN
Bluetooth Version:I50E_ADK.HBS.0.20150521.1
Hardware Version:TFT:EC2_EBT
MB:EC2_D1S
MD: DE5GM_R82_TE6K
Best regards,
lmcoelho said:
Hi Guys,
I also have a similar unit. Did you manage to make a backup of current image? I want to upgrade because I have two issue: sometimes the unit doesn't complete the startup and I can't use sygic navigator.
Build number: D200-20150713.2225-S1
Kernel version:3.0.36+
[email protected] #883
Tue Jul 7 10:43:52 CST 2015
MCU Version:V3.00H7_CA712_F7E1430
TCON Version:V6.00_HSD70_F77Hi
Media Version:89J_0025_000000
SN Number:UNKNOWN
Bluetooth Version:I50E_ADK.HBS.0.20150521.1
Hardware Version:TFT:EC2_EBT
MB:EC2_D1S
MD: DE5GM_R82_TE6K
Best regards,
Click to expand...
Click to collapse
By your username I assume you're brazilian, right?
Where did you buy your unit?
This night I've managed to talk to a Caska sales director for LATAM and he said that they cannot give the stock ROM for security reasons. I still have problems with the clock and the startup also (blank screen). They say their engineering team is working on fixing that issue, but China has a holiday that starts today (Oct 1st.) and only ends Oct 7th. So I'll only have an answer after that day.
Maybe you can talk to your seller and see if he gives any support (I bought mine at www.rcmultimidias.com.br).
Sure I am, you are right.
I bought mine from aliexpress. I found a update.img file in some folder, but I'm not sure if it is the full image. I opened that image in a linux box and looks like we have everything, there some ext4 images, boot image and a lot of other files, but I'm not 100% sure about it. May be somebody with experience could verify that.
Another annoying thing is the music and video apps not reading files from sdcard, they only read USB and inand. I've modified the Music app to point it to the correct path, but I couldn't install it back to the unit (It fails to install without any error). At least if I could reassign music and video buttons to another app, that would be ok (VLC is working fine, just need to adjust volume).
purchio said:
By your username I assume you're brazilian, right?
Where did you buy your unit?
This night I've managed to talk to a Caska sales director for LATAM and he said that they cannot give the stock ROM for security reasons. I still have problems with the clock and the startup also (blank screen). They say their engineering team is working on fixing that issue, but China has a holiday that starts today (Oct 1st.) and only ends Oct 7th. So I'll only have an answer after that day.
Maybe you can talk to your seller and see if he gives any sup.
Click to expand...
Click to collapse
Guys. I am also brazilian and I bricked my unit. They sent my the original update.img and sad to put a update.txt file on sdcard and boot. But I can not boot. Any idea?
Thanks
danylam said:
Guys. I am also brazilian and I bricked my unit. They sent my the original update.img and sad to put a update.txt file on sdcard and boot. But I can not boot. Any idea?
Thanks
Click to expand...
Click to collapse
Normally you have to boot in recovery mode, something that I still don't know how to do for this unit, and then use that update.img to restore. See this thread http://forum.xda-developers.com/showthread.php?t=2660662, there some possible procedures there and may be one of them work for the caska.
How big is the update.img file they sent to you?
lmcoelho said:
Normally you have to boot in recovery mode, something that I still don't know how to do for this unit, and then use that update.img to restore. See this thread http://forum.xda-developers.com/showthread.php?t=2660662, there some possible procedures there and may be one of them work for the caska.
How big is the update.img file they sent to you?
Click to expand...
Click to collapse
Yeah. I have tried everything but could not boot. It is just a blank screen.
Here you go with the update.img.
https://www.sendspace.com/file/mjkgfj
Here I posted a video with all the problems I'm experiencing with this unit. The main problem is that I cannot setup the right time, so all Android apps are useless (they require a secure connection to their servers and this is only allowed with a valid certificate [that needs the correct date]).
I was trying to root my unit so that I could use ClockSync to fix the time every 30 seconds (it resets after 1 minute), but had no success on that.
https://www.youtube.com/watch?v=tWWCP9tAYm4
danylam said:
Guys. I am also brazilian and I bricked my unit. They sent my the original update.img and sad to put a update.txt file on sdcard and boot. But I can not boot. Any idea?
Thanks
Click to expand...
Click to collapse
Hi!
So, where did you managed to talk to Caska? I've tried contact with Caska Brasil with no success (they say they do not offer support for Android units), and Caska Global didn't give any answer ([email protected]).
I've downloaded your update.img, but it's for CA712 and my unit is a CA380-XLA, I'm afraid to brick it. Have you tried entering recovery mode pressing reset and power buttons the same time?
lmcoelho said:
Sure I am, you are right.
I bought mine from aliexpress. I found a update.img file in some folder, but I'm not sure if it is the full image. I opened that image in a linux box and looks like we have everything, there some ext4 images, boot image and a lot of other files, but I'm not 100% sure about it. May be somebody with experience could verify that.
Another annoying thing is the music and video apps not reading files from sdcard, they only read USB and inand. I've modified the Music app to point it to the correct path, but I couldn't install it back to the unit (It fails to install without any error). At least if I could reassign music and video buttons to another app, that would be ok (VLC is working fine, just need to adjust volume).
Click to expand...
Click to collapse
I can reassign the screen buttons in my unit. In the settings, go to the last menu: "Shortcuts". Not sure if there's a way to reassign the physical buttons without modifying the original ROM.
danylam said:
Yeah. I have tried everything but could not boot. It is just a blank screen.
Here you go with the update.img.
Click to expand...
Click to collapse
I'm newbie as well, but I know that you must need possible clue, since you brick your unit. I'm afraid to point you to the wrong direction, but I believe it deserves to try. I saw some threads discussing about the bootloader and connect via USB. Looks like to have to install the usb driver for the rock chip (RK3066, since it is dual core and there is a file RK3066Loader_uboot_upgrade2_4_16gok.bin in the update.img file). I don't have more details on that, but may dig deeper.
lmcoelho said:
I'm newbie as well, but I know that you must need possible clue, since you brick your unit. I'm afraid to point you to the wrong direction, but I believe it deserves to try. I saw some threads discussing about the bootloader and connect via USB. Looks like to have to install the usb driver for the rock chip (RK3066, since it is dual core and there is a file RK3066Loader_uboot_upgrade2_4_16gok.bin in the update.img file). I don't have more details on that, but may dig deeper.
Click to expand...
Click to collapse
I've tried pluggin a USB to the unit and connecting it to my PC with no success, no devices are recognized. I have developer mode active but no options to enable USB Debugging.
So, I was able to extract all APKs from the file danylam hosted, and it's quite different from my unit: I have only one "Settings" menu, and in my unit some essential apps weren't installed (like HBS_Carkit_ChangeLogoUtil.apk and HBS_Carkit_SyncGPSTime.apk). I've installed them and solved one of my problems: car starting with a GMC logo. But the SyncGPSTime.apk isn't being called by any applications, so it's not starting (and I cannot start from itself).
Then I tried installing the Settings.apk that came with the ROM and ended up with a non functional setup menu, unfortunately. Since in that version most settings are changed from the "Android Settings", and I couldn't install that apk (it shows me an unknown error), I've lost some essential menus.
danylam said:
Guys. I am also brazilian and I bricked my unit. They sent my the original update.img and sad to put a update.txt file on sdcard and boot. But I can not boot. Any idea?
Thanks
Click to expand...
Click to collapse
purchio said:
So, I was able to extract all APKs from the file danylam hosted, and it's quite different from my unit: I have only one "Settings" menu, and in my unit some essential apps weren't installed (like HBS_Carkit_ChangeLogoUtil.apk and HBS_Carkit_SyncGPSTime.apk). I've installed them and solved one of my problems: car starting with a GMC logo. But the SyncGPSTime.apk isn't being called by any applications, so it's not starting (and I cannot start from itself).
Then I tried installing the Settings.apk that came with the ROM and ended up with a non functional setup menu, unfortunately. Since in that version most settings are changed from the "Android Settings", and I couldn't install that apk (it shows me an unknown error), I've lost some essential menus.
Click to expand...
Click to collapse
Hi,
The only way to talk to caska global is using skype (coagent,service). Normally they are online at 9pm (Sao Paulo time).
lmcoelho said:
I'm newbie as well, but I know that you must need possible clue, since you brick your unit. I'm afraid to point you to the wrong direction, but I believe it deserves to try. I saw some threads discussing about the bootloader and connect via USB. Looks like to have to install the usb driver for the rock chip (RK3066, since it is dual core and there is a file RK3066Loader_uboot_upgrade2_4_16gok.bin in the update.img file). I don't have more details on that, but may dig deeper.
Click to expand...
Click to collapse
Can you tell me how to extract this bin file from the image?
Thanks
purchio said:
I've downloaded your update.img, but it's for CA712 and my unit is a CA380-XLA, I'm afraid to brick it. Have you tried entering recovery mode pressing reset and power buttons the same time?
Click to expand...
Click to collapse
I found the update.img in my CA712 with a simple search for update.img. I used the file browser and and did the search from / device.
---------- Post added at 10:59 AM ---------- Previous post was at 10:40 AM ----------
danylam said:
Can you tell me how to extract this bin file from the image?
Thanks
Click to expand...
Click to collapse
This is the linux tool to open the image http://forum.xda-developers.com/showthread.php?t=2257331
command:
Code:
./imgrepackerrk update.img
It creates a update.img.dump folder and the bin file should be in the update.img.dump/Image
Boot.img is compressed and if you want to see content do this:
Code:
mkdir boot
cd boot
gzip -cd ../boot.img | cpio -i -
lmcoelho said:
I found the update.img in my CA712 with a simple search for update.img. I used the file browser and and did the search from / device.
Click to expand...
Click to collapse
Tried searching mine but couldn't find any *.img files. But at least I've managed to uninstall the CA712 settings from my unit and revert to the original one.
Looks like your unit is a little bit different from mine.
Hello, I am trying to fix my bricked phone but I do not know how to repack the files to flash them with the OST. I have the program (crack by heineken) and the Android 7.1.1 stock ROM .zip. When I try to choose my unpacked .zip it tells "error: list not exist" and in the post where I got the tool it tells "edit files "list" of unpacked nb0 image, remove .md5 file from list". How do I create this list from my .zip file?
Thank you for your help and apologys for bothering you with such simple question but I don´t know much about this.
msdotorpeko22 said:
Hello, I am trying to fix my bricked phone but I do not know how to repack the files to flash them with the OST. I have the program (crack by heineken) and the Android 7.1.1 stock ROM .zip. When I try to choose my unpacked .zip it tells "error: list not exist" and in the post where I got the tool it tells "edit files "list" of unpacked nb0 image, remove .md5 file from list". How do I create this list from my .zip file?
Thank you for your help and apologys for bothering you with such simple question but I don´t know much about this.
Click to expand...
Click to collapse
Have you looked for official method?
Why not use a package that's already packed?
ExaHamza said:
Have you looked for official method?
Click to expand...
Click to collapse
What do you mean by this? The Nokia support did not help and their repair people can´t find the error so I do it this way because it seem to my only option.
Benderisas said:
Why not use a package that's already packed?
Click to expand...
Click to collapse
Where can I find such package? The .zip I have is all I find but if you know more I am happy to take it.
msdotorpeko22 said:
Where can I find such package? The .zip I have is all I find but if you know more I am happy to take it.
Click to expand...
Click to collapse
*easy*-*firmware*.*com*/finder.php?qseo=home/browse/file-info/id/103049/
Just delete '*'s. I am not responsible for the files that are here. You also could just google for ND1-3700-0-00WW-B03.nb0 or ND1-3320-0-00WW-B03.nb0
3320 should give you 2017 June's version, 3700 should give you state after the October's patch (the one with the RAM management bug).
Or vice versa. I assume higher number is newer version
Benderisas said:
*easy*-*firmware*.*com*/finder.php?qseo=home/browse/file-info/id/103049/
Just delete '*'s. I am not responsible for the files that are here. You also could just google for ND1-3700-0-00WW-B03.nb0 or ND1-3320-0-00WW-B03.nb0
3320 should give you 2017 June's version, 3700 should give you state after the October's patch (the one with the RAM management bug).
Or vice versa. I assume higher number is newer version
Click to expand...
Click to collapse
Ooooh! Thank you very much! I will downlaod file from easy firmware and check for virus before I install.
Benderisas said:
*easy*-*firmware*.*com*/finder.php?qseo=home/browse/file-info/id/103049/
Just delete '*'s. I am not responsible for the files that are here. You also could just google for ND1-3700-0-00WW-B03.nb0 or ND1-3320-0-00WW-B03.nb0
3320 should give you 2017 June's version, 3700 should give you state after the October's patch (the one with the RAM management bug).
Or vice versa. I assume higher number is newer version
Click to expand...
Click to collapse
BotoxNoob said:
I would suggest you to flash this nbo with OST LA. Just download and extract the archive and then you'll see the nbo rom. That worked for me. Hopefully for you too.
Good luck and have a nice day!
Click to expand...
Click to collapse
I am sorry for bothering you again, but I have run into new problem. When I start flashing process it works for short but then it says "reflashing service bootloader" and progress bar will not move anymore even after having computer and program on for one night. Before starting flashing I clicked "edit device information" and waited for error to appear and my flashing settings is "normal download; check device ap status". Do you know what do to?
BotoxNoob said:
What do you mean with "flashing settings"? I could send you a video tutorial how to unbrick your phone. Here is the link. Follow the guide. It's very simple. Hopefully I could help you and please tell me, where you can set up the "flashing settings".
Thanks
BotoxNoob
Click to expand...
Click to collapse
My version of OST is 6.1.2 and it has options to choose between choosing file and the process starting. The settings I have are the default choosed by the program itself when you run it.
BotoxNoob said:
OST 6.1.2 doesn't work. You have to use OST 6.0.4. I think, that's the problem. Please report me the result and good luck.
Click to expand...
Click to collapse
With the OST version 6.0.4. it get stuck on "flashing partition: ABOOT" then it stops and tells;
error code: 0xc6da
error: download fails
error=se_er_adb_cmd_get_fail_ result (0xc6da)
Again I am sorry if this is easy to fix problem and I am just stupid.
BotoxNoob said:
Have you the latest Platform Tools installed?
But you're on the right way
I hope, we will fix your problem
Click to expand...
Click to collapse
I have downloaded this too. But what I have to do with it?
BotoxNoob said:
Go to "C:/adb" and then drag all the files from the platform tools.zip in the "C:/adb" directory. Overwrite the files if you get asked.
Now, please try flashing with OST again.
Click to expand...
Click to collapse
I had to make adb fodler myself but it still tells me same error.
BotoxNoob said:
OK. Please delete the "C:/adb" folder. I'll send you an other reply, and then it should work.
---------- Post added at 10:41 PM ---------- Previous post was at 10:36 PM ----------
But please wait a few minutes/hours.
---------- Post added 17th October 2018 at 12:39 AM ---------- Previous post was 16th October 2018 at 11:41 PM ----------
Hello,
I hope this will finally fix your problem.
Make shure, you've deleted the "C:/adb" folder.
Let's start
First of all, download the 15 seconds adb installer.
Execute it and always press "Y" and confirm everything.
Once you've done that, download the latest "Platform Tools" (for windows).
After downloading, extract the archive. Now drag all the files from the "platform-tools_r28.0.1-windows" directory to the "C:/adb" directory. Overwrite all files if you get asked.
Now, boot your phone in "Download Mode" and connect it to your PC.
Open OST 6.0.2, click "Edit Phone Information", wait until it's done and then flash the nbo rom to your device.
If that does'nt work, I could help you via TeamViewer.
But no matter, good luck and report me the result.
~BotoxNoob/Sebi
---------- Post added at 12:42 AM ---------- Previous post was at 12:39 AM ----------
Otherwise, try to follow this video tutorial.
Click to expand...
Click to collapse
There still is same error as always. Problem is my phone does not boot so I can not change setting for USB debugging. But now I have ADB program installed and I can wipe partition with if it corrupted, no?
BotoxNoob said:
Do you mean that USB Debugging is not enabled?
Click to expand...
Click to collapse
No. I never used it before phone stopped working so I never turned on.
Also, it start in downlaod mode when I plug it to PC.
And how can you not delete files by external access when device is turned off? This sounds like bad joke.
BotoxNoob said:
The problem is, for flashing partitions, you need an unlocked bootloader. But there's no official (and no free unofficial) way to unlock the bootloader on the Nokia 5. It's not a bad joke.
Click to expand...
Click to collapse
Think about windows doing this. After BSOD/crash/update error, for whatever reason, PC does not boot so you want to enter BIOS but it tells you to log in the administrator account. But you can not log in because all you can reach is POST screen (the black with the cpu and hardware information written). Would that not be stupid?
Also, you mentioned unofficial way? Nokia repair people did not find problem so this looks like only way for me. Can you tell me more?
BotoxNoob said:
....
That costs 5$. So, do you really want to buy this unlock file? I can't guarantee that this will help you.
Click to expand...
Click to collapse
The way you say it sound like ripoff... First I will ask coworkers if they know something. See, I work for computer service (windows, macintosh, linux) but I never work with android. Now I see why...
BotoxNoob said:
I'm so tired, that I couldn't help you. But the steps I told you worked for me. I'm so sorry
Click to expand...
Click to collapse
It is not your fault android has **** security features that not make sense. Thank you for tips anyway.
Hello mate, did you fix your problem?