Database Users

[ROM] OS_Acer_4.002.14.EMEA.GEN1_A22F_A

This is official ROM (bin) from acer. Is for Liquid E. For Liquid - visit modaco forum.
http://tranz.it/load.php?id=pywW4rpuHxQ1lsGx685901

Since yesterday also available on the acer site (support section)!

nietnicks said:
Since yesterday also available on the acer site (support section)!
Click to expand...
Click to collapse
Yep- it is from there, but only BIN file.

Hmmm seems that with the official acer update the upgraded S100 is going to be a problem.
I've got a message that the froyo update can only be done on liquid e devices because of the RAM space. s100 has 256Mb and the liquid e 512Mb. Because of that the official acer update tool stops.
Is this the reason the froyo alpha version i've installed now is a bit laggy???
[update] Gonna try the modaco version now! (4.002.14.EMEA.GEN1 bin for 256M)
hmmm, stopped at fastboot succesfull, now rebooting. and then it stopped. powerbutton does nothing, repluggung usb does nothing. Bricked?
Not bricked as it seemes. Used the following tips by malez and got out of the bricked mode (where it did nothing):
1. Pull battery in and usb cable to phone and pc
Press in order and without releasing
1. < (back button)
2. Camera
3. (power) not always necessary
Bootloader should appear. If that doesn't work unplug usb and unplugg battery and retry.
If this still does not work you can also try this
1. turn off your phone (and unplug usb if plugged)
2. press camera + volume up and then without releasing this two buttons hit power and the phone will vibrate two times. Release all buttons.
3. take the battery out and put it back (don't touch any button on the phone)
4. connect the usb to your computer and you will the acer logo and then bootloader will pop up.
Second list of tips got me up and running again with the new bin!

Is there any way to install this upgrade from SD card, I use Linux and therefor do not have windows.
Thanks.

nimnull said:
Is there any way to install this upgrade from SD card, I use Linux and therefor do not have windows.
Thanks.
Click to expand...
Click to collapse
Yes, you can... amm... somewhere in modaco i saw this kind of update... see there: http://android.modaco.com/category/418/acer-liquid-liquid-modaco-com/
I hope you find it!

nietnicks said:
[update] Gonna try the modaco version now! (4.002.14.EMEA.GEN1 bin for 256M)
hmmm, stopped at fastboot succesfull, now rebooting. and then it stopped.
Click to expand...
Click to collapse
Same here.
After "fastboot" successful it show a warning like "restoration is needed".
Taking the battery out (to turn off the phone) and putting it back and after turning on the phone worked for me

[Q] Flash Tool says: "Searching for Xperia..."

I have Xperia X8 with Eclair update. When I try to flash with X10 Flash Tool it always says Searching for Xperia... Yes I connected the phone in flash mode by holding back button and conecting with usb, I have usb drivers. Non-gui version says the same. I have tried to flash 1.6 firmware from "Going back to 1.6" thread. Please help me, fast!

please post question at general section

Flash Tool help
Try connecting the phone in flash mode, when the flash tool displays "Searching for Xperia ......"

Solved!
Solved! I just installed some drivers from some site. Yes i know i was telling that i have drivers, just i did not know i have incorrect drivers.
Now i am back to Android 1.6!
Can somebody sugest me way to root my Xperia X8?

Now, follow the Step by Step TUT.
Step by Step TUT

Now Rooted 2.1. Thanks for help.

Next time it should help: http://forum.xda-developers.com/showpost.php?p=9510216&postcount=16

How can I install the drivers?
I've downloaded the files with the i386 and amd 64 files but I don't really know what to do with them.
When the device is on the pc is ok with it but when I'm in flash mode the pc just doesn't recognize it and the flash tool says that it's searching for my xperia.
What can I do?
Thanks, Tal.

SaNTi285 said:
How can I install the drivers?
I've downloaded the files with the i386 and amd 64 files but I don't really know what to do with them.
When the device is on the pc is ok with it but when I'm in flash mode the pc just doesn't recognize it and the flash tool says that it's searching for my xperia.
What can I do?
Thanks, Tal.
Click to expand...
Click to collapse
Download automatic install from this link http://www.akshayy.com/sonyericsson/wp-content/uploads/SE_USB_Driver_installer.zip
Press the thanks button!

I've installed the drivers you gave me and it still didn't work even though the computer recognized it now but still in device manager i have it under a yellow triangle sign.
what can I do now? maybe it's my computer that make the problem?
I'm really getting frostrated about it and don't know what to do.

Full instructions.
SaNTi285 said:
I've installed the drivers you gave me and it still didn't work even though the computer recognized it now but still in device manager i have it under a yellow triangle sign.
what can I do now? maybe it's my computer that make the problem?
I'm really getting frostrated about it and don't know what to do.
Click to expand...
Click to collapse
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!

Still not succeeded with flashing.....
velnens123 said:
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Click to expand...
Click to collapse
I am still not succeeded with flashing my x8 to android 1.6 (now having 2.1) so i can root 2.1. I am a really noob, so i hope anyone can help me
What did you mean with yelllow triangle, and where can you download non-gui version? When i open the x10flash.bat i cannot write anything (there is nothing happened when i press 2 or Y.
I hope anyone can help me
(Sorry for my bad English)

Explain for Noobs!
thomaszq said:
I am still not succeeded with flashing my x8 to android 1.6 (now having 2.1) so i can root 2.1. I am a really noob, so i hope anyone can help me
What did you mean with yelllow triangle, and where can you download non-gui version? When i open the x10flash.bat i cannot write anything (there is nothing happened when i press 2 or Y.
I hope anyone can help me
(Sorry for my bad English)
Click to expand...
Click to collapse
Yellow trinagle is located in device manager!(just look at other thread)
You can get non-gui version in Bin4ry thread "X10 Flash Tool...and so on"
You need to open x10flash.bat in non-gui folder.(not gui)

velnens123 said:
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Click to expand...
Click to collapse
Im still stuck on step 1. The yellow mark still wont disappear no matter what I have tried to reinstall/update the driver.
I have let the wizard to search the internet for correct driver, and I have point it to specific folder with the driver in it, I have tried several versions of the driver that I can find on the net.
I keep getting "the hardware was not installed because the wizard cannot find the necessary software" error.
I can use Flash Tool GUI to root my X8 and to install XRecovery. Those were done successfully. And we are talking same session same day here. Just straight after I rooted the phone and installed Xrecovery, did a backup, then I wanted to flash to 2.1 but then this happened.
Only when the phone is connected to the PC in flash mode.
Can anyone help point me in the right direction?
Forgot to mention: the driver I'm talking about is SEMC signed driver. That is the driver for flashing right? Or have I totally missed this point all together?

I got it working now. It was not SEMC driver that's needed. It should be the gordon's gate driver. For some reason that driver went missing. I have installed SEUS and managed to flash my phone yesterday using SEUS. So definitely it was installed, but disappeared today or sometime after I used SEUS last.

is there anyway to install CWM on ICS galaxy tab10.1 3G without ODIN

is there anyway to install CWM on ICS galaxy tab10.1 3G (P7500) without ODIN
my tab not connect to my pc so that odin can't see it ( i tried every way in XDA to connect it to my pc )
I have all the correct drivers installed. i have Galaxy SII and it's work fine
olso i try Mobile Odin but no luck.
it's need root and root need CWM
any help
i would be Grateful

khad96 said:
is there anyway to install CWM on ICS galaxy tab10.1 3G (P7500) without ODIN
my tab not connect to my pc so that odin can't see it ( i tried every way in XDA to connect it to my pc )
I have all the correct drivers installed. i have Galaxy SII and it's work fine
olso i try Mobile Odin but no luck.
it's need root and root need CWM
any help
i would be Grateful
Click to expand...
Click to collapse
No root Doesn't need cwm, install the root files from the stock recovery then using the rom manager from market install the CWM. BTW mobile odin needs root so it won't work with you Untill you root
Sent from my GT-P7500 using xda app-developers app

I believed Stock ICS recovery runs into an error after "apply update from sdcard"...

and how can i istall root in stock ICS .
( install the root files from the stock recovery ) more explaine plase

khad96 said:
and how can i istall root in stock ICS .
( install the root files from the stock recovery ) more explaine plase
Click to expand...
Click to collapse
Go to the thread "Root galaxy tab 10.1 the easy way". You will find the link to the file you need. Put the "update.zip" in the root folder of your tab. Reboot into recovery by switching off your tab. Press the left volume button and hold it while powering on your tab. Wait for the recovery options. Now press the volume up botton again and then vol down. Choose the option "install zip from sdcard". It will give you root access and install superuser. Now you can download busybox from the market and complete the root from within busybox app.

connect first is the right way
First .... I think you should have a pc connection to your tab ,, Transfering Files and data through the usb port is fast ,easy and useful
You nay try Install new "Windows 7" to your pc , I'm using Windows 7 and first time I connect my tab to my pc It found its driver itself (may be through internet / not sure)
ODIN is useful /// by the way you may try Mobile ODIN :good::good::good:
sorry for my English...
or I will explain in my language if you understand...
หรือให้กุอธิบายเป็นภาษาไทยก็ได้นะ ถ้าเมิงเข้าใจ 555+

here we are start again.
it need CWM and CWM need Odin and Odin need a connection but my galaxy tab 10.1 3G (P7500) have a red X on the battery icon.
any thing else.

I think I nearly understood you...if you have a red cross on the battery icon it shows that you are still running android,huh?so you need to turn off your tab and go into download mode,because Odin detects your tab only then.please feel free to ask if you don't know how...

yes you are right I'm running android ( big smile )
i did exactly like you said but no luck. still waiting usb cable.
did not connect

....
Did you try mobile ODIN yet

yes i try mobile ODIN . and it's need root correct me if I'm wrong.

khad96 said:
yes i try mobile ODIN . and it's need root correct me if I'm wrong.
Click to expand...
Click to collapse
Can you enter download mode with your tab, odin doesn't connect untill you use download mod, and you can try stock recovery. To flash the root.zip
Sent from my GT-P7500 using xda app-developers app

yes i can enter Downloading mode and Recovery mode screen.
( Hold the Vol Down button (the left Volume button) and then hold the Power button as well. )
( Press the Vol Up button (the right Volume button) to select Downloading mode. )
then a warning .....
Volume up : continue
a screen with a green android and downloading...do not turn off target!! with small text on top left say:
odin3 download made
( protocol v2)
reason :force key
secure mode: secure
check signature: check
custom binary download: no (0 counts)
current binary: samsung official
waiting usb cable...
---- then---
i plug the usb cable in the computer and in the tab and run odin .
but nothing happen still waiting the cable and odin not connected to tab

retail locked ?
look for unlock
but try "Mobile odin" it install clock work recovery .
just make sure u get both .apk Mobilelite.apk and then flashkernel.p7500v2.apk
Google search "chainfire mobile odin xda"
scroll down to third post or so for 2nd apk in mobile odin thread.
( also read mobile odin thread )
then when u select recovery after pressing power + volume down.
selecting recovery should boot into cwm 5.5.0.4 recovery
sorted hope this helps
Sent from my GT-I9300 using xda premium

Connect your pc to your tab when you are in android,make sure your tab's drivers are installed,go to here:
sites.google.com/site/arashtarafar/
Download "recovery.tar.md5" at the bottom of the page...
Put your tab into download mode(a green android image will appear on the screen),launch Odin,connect tab to pc,if you don't have the tab's drivers but have an internet connection,windows(mine windows 7) will automatically search for and install them.if so,wait until finished,then you should see a text with yellow background showing "COM X(1,2,3,...)"that tells that your tab is detected by Odin,now in Odin press the pda button and in the browser window that appears choose your recovery(you've downloaded that),wait until a word "PASSED" with green backgroung appears,disconnect tab from pc...go into recovery,if you see a rolling screen press the power button to restart tab,then go to the above link and download "bootloader.tar.md5",flash this with the above instructions...
Important Notice: Do Not Flash The Bootloader If You Are Running Stock ICS!!!It Causes Flickering Unlock Screen!!!You've Been Warned!!!
Ask more if it didn't help

gordonx10i said:
retail locked ?
look for unlock
Click to expand...
Click to collapse
well ! my tab is not retail locked because i upgrade it from 3.1 to 4.0.4 by rooting 3.1 then install the ICS from install from sdcard.
arashtarafar said:
Connect your pc to your tab when you are in android,make sure your tab's drivers are installed,go to here:
sites.google.com/site/arashtarafar/
Download "recovery.tar.md5" at the bottom of the page...
Put your tab into download mode(a green android image will appear on the screen),launch Odin,connect tab to pc,if you don't have the tab's drivers but have an internet connection,windows(mine windows 7) will automatically search for and install them.if so,wait until finished,then you should see a text with yellow background showing "COM X(1,2,3,...)"that tells that your tab is detected by Odin,now in Odin press the pda button and in the browser window that appears choose your recovery(you've downloaded that),wait until a word "PASSED" with green backgroung appears,disconnect tab from pc...go into recovery,if you see a rolling screen press the power button to restart tab,then go to the above link and download "bootloader.tar.md5",flash this with the above instructions...
Important Notice: Do Not Flash The Bootloader If You Are Running Stock ICS!!!It Causes Flickering Unlock Screen!!!You've Been Warned!!!
Ask more if it didn't help
Click to expand...
Click to collapse
this is my problem odin can't see my tab even my pc or other pc. always give me an red X on the battery.
but it charge from pc when it's on or off

So you can wait until we send you a video or image tutorial...

thanx you all for your help.
yes i can wait

I have the same problem. I upgrade to ICS and now i can't connect the tab to the computer ( Odin, kies....). It isn't root and i can't to do it without odin. I can't to install the CWM without root or odin.
What can i do?
Thanks

We'll give it soon...for now let's check MTP,for this:go to settings-->storage-->the button at the upper right corner(menu)-->USB-PC connection and check whether "Media device(MTP)" is checked.if it's not,check it and retry connecting tab to pc...

[HOW TO] Restore your tablet to stock + Reroot + Flash New Recovery

Before doing anything, make a backup to your external MicroSD card before continuing. Even if this method is very safe, and has been done several times without problems, we can't predict anything that may happen during the process.
RESTORE YOUR TABLET TO STOCK, APPLY ROOT, THEN FLASH A NEW RECOVERY.
This tutorial applies to both P3110 and P3113. They are the exact same models.​
REQUIRED:
Odin ( Take any version you wish. The latest ones should do the trick )
The stock Firmware file. Concerning this part, Google is your friend.
The official Samsung USB Cable that came with your tablet. It is recommended (but optional) to connect your tablet into your computer's built-in USB ports.
The latest Odin-flashable recovery. ( P3113 uses P3110 files )
CF-Auto-Root
Patience
Returning your device to a like-new state.:
1. Boot into Recovery Mode. This can be achieved by holding Volume Up + Power when your device is powered off.
2. Wipe all data. [ Factory Reset ( /data /cache ), System ( /system ) and Internal Data ( /media/storage )
3. Reboot into Download Mode. Usually found on the Advanced Options of most CWM-based recoveries.
It happens that your Tablet cannot boot into Download Mode due to various reasons. There is a battery trick that can be achieved. Do it when you absolutely cannot boot into Download Mode.
1. Remove your tablet's battery.
2. Connect your tablet to your computer
3. Your device should automatically boot into Download Mode.
4. Put back your Battery back into your device.
Click to expand...
Click to collapse
4. Connect your Tab to your Computer
5. Run Odin as Administrator + Windows XP SP3 Compatibility Mode ( Right-Click > Run as Administrator // Right-Click > Properities > Compatibility > Windows XP Service Pack 3 )
6. Click the "PDA" button, and select the previously-downloaded firmware file.
7. Press Start ( Do not check repartition. It will totally screw up your device. )
8. The installation process will overwrite all data on your device and install the stock firmware.
9. You are done.
Click to expand...
Click to collapse
Rerooting your device.
1. Reboot your device into Download Mode. From there, you are not obligated to connect your device to your computer.
2. Open Odin as Administrator + Windows XP SP3 Compatibility
3. Connect your Device to the computer.
4. Click on PDA and select the CF-Auto-Root package you previously downloaded
5. Click Start, with Auto Reboot Checked! Again, do not check "Repartition" as it may screw up your device.
6. Wait until it's done.
Click to expand...
Click to collapse
Installing CWM Advanced Recovery!
1. Reboot your device in Download Mode.
2. Open Odin as Administrator + Windows XP SP3 Compatibility
3. Connect your Device to the computer.
4. Click on PDA and browse the Odin-packed CWM package you downloaded.
5. Click Start, with Auto Reboot Checked! Again, do not check "Repartition" as it may screw up your device.
6. Wait until it's done.
Click to expand...
Click to collapse
Press the thanks button if this tutorial helped you.
If you have any problems, feel free to post in the thread. tho I won't probably help you.

Nice guide, but don't we have enough?
Sent from my GT-P3113 using Tapatalk HD

Luigi2012SM64DS said:
Nice guide, but don't we have enough?
Sent from my GT-P3113 using Tapatalk HD
Click to expand...
Click to collapse
Yup.... I think there are enough guide avout this....
Sent from my GT-I9300 using xda premium

OK, but first I must install Triangle Away to reset the counter and next I use Odin and recover original rom.

-_-
as007 said:
OK, but first I must install Triangle Away to reset the counter and next I use Odin and recover original rom.
Click to expand...
Click to collapse
Bro... You have to understand properly... Lame Juniors..
I AM NOT JUNIOR.. I JUST HAVE JOINED XDA FORUMS LATE!!:good:

In op page it is mention about battery remove /in , but my GT p3100 does not have such option, battery is permanently fixed .
Sent from my GT-P3100 using xda premium

Well when i use Customrom CM 10.1 i decide to back on Stockrom, i format my system and clear all my data so my tab was totaly clean even my customrom was gone so i flash it to stockrom. and yes my tab was totaly FRESH! :good:

idhbar said:
In op page it is mention about battery remove /in , but my GT p3100 does not have such option, battery is permanently fixed .
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance

WaryLouka said:
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance
Click to expand...
Click to collapse
Hi, I have PA installed with TWRP installed. I downloaded my firmware from http://samsung-updates.com/. Do I need to flash the stock kernel as well? and stock recovery? Sorry for the noob question.

Maybe I'm just missing it, but I've gone to a couple of firmware sites and I can't find US firmware. Is there anywhere I can get that?

Does anyone have a link that's not to one of these stupid-ass, lame, @#$%ing pay download sites?
3 hours for firmware? WTF?

jdCaptivate said:
Does anyone have a link that's not to one of these stupid-ass, lame, @#$%ing pay download sites?
3 hours for firmware? WTF?
Click to expand...
Click to collapse
Latest P3113UECMH2 (4.2.2) : http://hotfile.com/dl/241707705/3ce5c6f/XAR-P3113UECMH2-20130826170038.zip.html
Or : http://uploaded.net/file/oadonsrj

Bibicp said:
Latest P3113UECMH2 (4.2.2)
Click to expand...
Click to collapse
TYVM!

jdCaptivate said:
TYVM!
Click to expand...
Click to collapse
Don't say thanks: press it.

Thanks I'm on 4.2.2 now

Dead Tab2?
WaryLouka said:
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance
Click to expand...
Click to collapse
I have a similar situation. A previous rooting operation on my Tab2 7 P3113TS was either bad or partial and it appears it will not go into the download mode. power-pgup, power-pgdn, or just power all go to the Samsung splash screen then to a blue VeinDroid rom screen but no further. I tried 3 different version of ODIN and all recognize the device (port goes yellow) but cannot communicate. It stops at the SetupConnection step. Is this thing toast or is there something I'm missing?

WaryLouka said:
If a message is shown, press Volume Up. If you can't enter downloadmode normally, try doing "adb reboot download" in ADB. If you still can't, connect your phone to your computer, REMOVE THE BATTERY, hold Volume Up/Down + Power until DownloadMode is entered and put the battery in again. If your phone doesn't boot or/and battery trick doesn't work, use an USB Jig. If theres no usb jig, while until the battery icon is shown ( charging ) then do "adb reboot download" in ADB.
Click to expand...
Click to collapse
Are you serious????
REMOVE THE BATTERY????
I think it's not recommended to do anything like this only because of flashing a Fw, isn't it?^^

help plz
Hi I lost my /efs files for my samsung galaxy tab 2 p3113 how do I fix this proble If some one can help me I would be very graitfull

Great!thanls for The tutorial
Sent from my Ativ S using Tapatalk

antkiller said:
Hi I lost my /efs files for my samsung galaxy tab 2 p3113 how do I fix this proble If some one can help me I would be very graitfull
Click to expand...
Click to collapse
do you have a backup?

[Q] i can't get root on my LG G2 D802 4.4.2

hello!
i have try alot of guids all over the net but i can't get root on my device.
i complete the prosess without any erorrs and when i check if i got root i dont have it.
please help me!
thanks!
P.S when i start to instal the adb it's finish after a few secends you think thats how it's should be?

mor123460 said:
hello!
i have try alot of guids all over the net but i can't get root on my device.
i complete the prosess without any erorrs and when i check if i got root i dont have it.
please help me!
thanks!
P.S when i start to instal the adb it's finish after a few secends you think thats how it's should be?
Click to expand...
Click to collapse
use towelroot. its easy than adb method.

PowerHazard said:
use towelroot. its easy than adb method.
Click to expand...
Click to collapse
i did that too and it wont work seriously i try everithing!
please help me! :crying::crying::crying:

do you think that i need to downgrade from 4.4.2 to 4.2.2?
if yes please tell me how!

Anyone? Please help me!

mor123460 said:
Anyone? Please help me!
Click to expand...
Click to collapse
Did u enable usb debugging?

towelroot should work and latest ioroot too.
how are you checking root?

meangreene said:
towelroot should work and latest ioroot too.
how are you checking root?
Click to expand...
Click to collapse
with root checker app and i know that it's should work thats whay it's draving me crazy!
Olso a enter download mode and it's telling me that my device is unroot.

its working with me on my lg D802 running 4.4.2
please follow my steps
1. enable USB Debuging
2. downlaod the last version of ioroot from this link http://www.firedrive.com/file/28B72973396C91D1
3. extrack the files in new folder
4. run the root
5. you must see black screen open
6. connect your phone in PC in the charger mod
7. enable AIR PLANE MODE (U must do this step)
8. go to blcak screen and pres Enter to begin the root
9. after pressing Enter you must be in recovery mode
10. go to apply update from adb (Using the voulum up and down and power)
11. u must have now on your phone screen some thing like in yellow font
12. now press Enter in your black screen on PC
13. after that you should show DAT ROOT on phone screen
14. and after that its be (Install From ADB Complete)
15. go up and press reboot system now
and now you should be rooted and have SuperSu in your phone
Sorry for my bad English
Enjoy

AjdinKuduzovic said:
its working with me on my lg D802 running 4.4.2
please follow my steps
1. enable USB Debuging
2. downlaod the last version of ioroot from this link http://www.firedrive.com/file/28B72973396C91D1
3. extrack the files in new folder
4. run the root
5. you must see black screen open
6. connect your phone in PC in the charger mod
7. enable AIR PLANE MODE (U must do this step)
8. go to blcak screen and pres Enter to begin the root
9. after pressing Enter you must be in recovery mode
10. go to apply update from adb (Using the voulum up and down and power)
11. u must have now on your phone screen some thing like in yellow font
12. now press Enter in your black screen on PC
13. after that you should show DAT ROOT on phone screen
14. and after that its be (Install From ADB Complete)
15. go up and press reboot system now
and now you should be rooted and have SuperSu in your phone
Sorry for my bad English
Enjoy
Click to expand...
Click to collapse
i did that over and over agine and it's still dont work!

mor123460 said:
i did that over and over agine and it's still dont work!
Click to expand...
Click to collapse
You're gonna lose all your data to downgrade so go and do a factory reset on the device itself then try towelroot...you probably have something interfering in your current setup...if that doesn't work I'm at a loss as towelroot works flawlessly every time I use it

mor123460 said:
i did that over and over agine and it's still dont work!
Click to expand...
Click to collapse
did you do the 7th step