I was trying to install the DJ05 modem.bin via odin, however, the phone will not boot. it shows a symbol of a phone caution sign and a computer. I have tried to reflash but to no avail. I have tried to flash back to DI01 but has not helped. I can boot into download mode but nothing else.
Did you use phone or pda. If you used phone, you are bricked
Sent from my SCH-I500 using XDA App
i used pda. I've done this in the past with no problems, however, this time for my friends phone it has done this.
try flashing in download mode again. I've got that problem before. I reflashed it with stock kernel, system and recovery then all things came back. ^^
Search Adrynalin he is a Mod on here that is Amazing with these phones. If he has time he will walk you through some steps that will get you back! Don't forget to buy him a beer!
The OP actually got everything sorted out on another forum. Turns out it was just as simple as removing the battery before plugging in and launching Odin
Link please! I'm in the same rut after flashing. :-(
RedSlate said:
Link please! I'm in the same rut after flashing. :-(
Click to expand...
Click to collapse
Pull the battery and try
Related
Sorry in advance if im posting this in the wrong thread or if this has been posted before....
I have a Vibrant and i was updating using samsung kies. I never rooted my phone or did and customize things to it. i was going through the updating process when samsung kies said that the update failed and to disconncet my phone. so i disconnected my phone (the screen said download mode and do not turn off target). now when i try to turn my phone on i get a black screen with a phone triangle and computer logo. it will not go in to recovery. cau u please help... thanks
hopefully there is a way to fix this without using odin
odin and download mode there is a thread in development about in the bible i think about unbricking a vibrant, its very hard to brick a vibrant completely, I have done so before, but you can recover via odin.
Your phone is not fully bricked. and your better off than me half the time
How were you trying to boot into recovery if you've never rooted or customized? Your phone is not completely bricked if its turning on so I'm sure there's a fix.
Sent from my PG06100 using XDA Premium App
http://forum.cyanogenmod.com/topic/6998-howto-recover-from-a-soft-brick-on-your-vibrant/
that should have everything you need, you wont be able to get into recovery you need to get into download mode
Rooster85 said:
How were you trying to boot into recovery if you've never rooted or customized? Your phone is not completely bricked if its turning on so I'm sure there's a fix.
Sent from my PG06100 using XDA Premium App
Click to expand...
Click to collapse
You can boot into recovery without being rooted... i did it before when i wanted to do a hard reset.. plus the tmobile rep wanted me to try and boot into recovery to do a hard reset and clear all user data.
BossLady said:
Sorry in advance if im posting this in the wrong thread or if this has been posted before....
I have a Vibrant and i was updating using samsung kies. I never rooted my phone or did and customize things to it. i was going through the updating process when samsung kies said that the update failed and to disconncet my phone. so i disconnected my phone (the screen said download mode and do not turn off target). now when i try to turn my phone on i get a black screen with a phone triangle and computer logo. it will not go in to recovery. cau u please help... thanks
hopefully there is a way to fix this without using odin
Click to expand...
Click to collapse
remove the battery for five minutes, then reinsert it. You can now go back to the normal download mode. ANd I think you can even boot up normally. The former scenario happened to me so I am quite sure of that.
THANKS!!!!
big thanks to everyone i got my phone up and running again. i used odin (which was tricky) and followed the steps i saw in a youtube video. right before i was about to give up i called tmobile and ordered a replacement phone ....lol...tried one more time and it worked im SOOOO HAPPY this is a great community of people , couldnt have done it without u guys THANKS AGAIN!
I always brick my baby, and Odin is always there to save me
PLEASEEE!!! help me out i tried upgrading from kies mini to froyo. I did this with success earlier in the past on my old vibrant but had it replaced to a referbished one and i tried upgrading it now.. but my vibrant was stuck at downloading the uprade on kies mini at 1% for half an hour... and the vibrant had the android shoveling yellow sign saying do not turn off target... for half an hour as well.. I knew something was wrong there because it didnt take even close to that long last time..
NOW I tried unplugging the usb wire restarting the phone in emergency mode still nothing... now all i have is a cellphone...yeild sign... computer icon showing..
PLEASE HELP!!!
Dont worry you totally didnt brick your phone. Its pretty common, can you get your phone into download mode? If you can then just odin to stock.
1.Take your battery, sim card and SD card out
2. Plug in USB Cable
3. Hold volume up/down and plug in battery (There are a few ways of doing download mode and I believe its phone specific, or if you have bootloaders installed its different as well, google around a bit...
4. Start odin and presto, your phone works again!
hey thanx... I just did that.. I never used odin but i installed odin with all the files... I believe my vibrant is hardware locked because i was trying to get into download mode for 2 hours with different techniques.. such as just volume keys and power button... taking out the battery holding volume keys then putting it back in.. but nothing put me into a downlaod mode... somehow odin still found my phone while i was still stuck under that picture...
I loaded the .pit file without the jfd image.... becuase i didnt know what window i was suppose to load the jfd image from... like pda.. or etc???
anyway so i just loaded the .pit file and clicked start it reset the phone and the phone went into restart mode and it turned on fine i checked it works fully... lol.
It makes no sense... was i suppose to load the jfd file somewhere?????
i still want to upgrade my vibrant to 2.2... but now whenever i turn on the keis mini it promps me to emergency recovery upgrade... so i tried doing that and went into download mode since now i can.. and plugged in my phone but the progress bar on my computer for upgrading never moved from 0%... its odd... am i doing something wrong?
so again i disconnected and "bricked" my vibrant again lol... went into odin followed the same steps just loading the .pit file and it reset the vibrant back to normal again lol...
Im so confused yet happy that i have my phone working but i still want my froyo... i love the fact that i can use yahoo video messaging on it with froyo and have flash and other benefits..
any advice?
Thanx again
try this...........
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
put pit in pit and tar in pda on odin
Connect it to the PC and see if ODIN recognizes it.
If it does, you are safe, flash stock.
EDIT: nvm, didn't notice the third post was yours.
Anyways, if ODIN can STILL recognize it, get the first from the link on the post above, FOLLOW INSTRUCTIONS and enjoy your again-useful phone.
I had that same issue once.
Try a JIG. And do a search, I see like 50 posts a week like this.
First.
Thank you all for taking your time to help. I have one last question... since I used Odin but it just reset my phone and I didn't flash the old firware on it..... ever since that now I tried to update my phone with kies mini and it says phone unregistered... in that place before it used to say new firmware available and showed old forward numbers/letters.
So if I use odin all the way will this resolve "unregistered device" problem?
Thanx again
Sent from my SGH-T959 using XDA App
AlexSochi8 said:
First.
Thank you all for taking your time to help. I have one last question... since I used Odin but it just reset my phone and I didn't flash the old firware on it..... ever since that now I tried to update my phone with kies mini and it says phone unregistered... in that place before it used to say new firmware available and showed old forward numbers/letters.
So if I use odin all the way will this resolve "unregistered device" problem?
Thanx again
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It should.
Sent from my GT-I9000 using XDA Premium App
Bricked
I have a similar issue, was soft bricked, Odin to stock then, while using Mini Kies to upgrade back to Froyo the phone turned off and never came back on. I cannot get any response from the phone as far as light's or sounds. Checked a few batteries and still no use. I'm curious if anybody else has had a similar experience?
so if it should solve the unregisted problem... where I put in the pda file... is it possible to put in the last froyo there so odin could flash froyo on my phone so basically i wont have to go through kies process?
odin back to 2.1 then root and then flash a 2.2 rom way better then a stock 2.2 rom
Dan_Brutal said:
Try a JIG. And do a search, I see like 50 posts a week like this.
Click to expand...
Click to collapse
I might be late to the party but I've built a jig and I can't believe how quickly this thing saved my ass...
Sent from my GT-I9000 using XDA Premium App
dsuycott said:
I might be late to the party but I've built a jig and I can't believe how quickly this thing saved my ass...
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Yeah man. Jigs are the balls. Saved my ass this morning with a bad bootloader flash. I got lucky though.....
Sent from my GT-I9000 using XDA Premium App
Make sure you have the right odin files, once you have gotten back to normal just do a factory reset on your phone if that is possible. Then root, flash, and do whatever you want to do. Without your proper files for odin you'll get bricked or get something different.
How screwed am I? Odin doesn't recognize phone, vibrant aio toolkit can't adb phone into recovery or download mode. Flashing different rom screwed up during kernal phase and I stupidly rebooted phone. I CAN use a jig I bought to get into download mode but computer Odin doesn't 'see' it.
Sent from my GT-I9000 using XDA Premium App
dcboi said:
How screwed am I? Odin doesn't recognize phone, vibrant aio toolkit can't adb phone into recovery or download mode. Flashing different rom screwed up during kernal phase and I stupidly rebooted phone. I CAN use a jig I bought to get into download mode but computer Odin doesn't 'see' it.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Do you have the drivers installed on your PC?
Sent from my GT-I9000 using XDA Premium App
Dan_Brutal said:
Do you have the drivers installed on your PC?
Yes, not sure what changed but I plugged the phone in again and Odin recognized it, the file I loaded is PDA_T959UVKB5.tar.md5, the process has hung up at SetupConnection...
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA Premium App
id keep trying it odin is finicky! maybe try different usb ports
ok guys i know i aksed for a lot of help.. but i have a newly discovered problem.. when i connect my vibrant thru the original usb port to transfer files back and forth it never lets me transfer even the smallest picture image... on both internal 16gb or sd... the phone computer just constantly shows transferring animation.... i tried many times.. i even scanned the phones hard drive and sd card for errors... nothing... could it be i messed something up with kies? or thats why kies in general never went with the upgrade past 1%?
its a refurbished phone.. when i got it.. i uploaded my old pics without a problem with the same usb cable..... its weird.... i dont know what to do? what is it likely the phone itself or i messed it up with kies upgrade????
please help.. its frustrating me
ok, maybe not 100's of times but my bootloader showed 52 last time i flashed. Not sure what happened, but something went wrong. My phone only shows a picture of a phone, with a yellow triangle, and a picture of a computer. Under that it says firmware failed, and under that it says try recovery mode. Download mode, and recovery mode shows the the same screen described as above, and odin does not see phone. I left the battery out over night, and this morning, the same screen, and odin still don't see the phone. I know all the key combos to get into recovery or download mode, and neither works.
You have a bricked phone now. Use JIG USB to save it!
I had similar problem and resolved mine by removing the battery, reinserting it and holding down volume down and home keys while powering on (download mode). Then I connected phone to pc via usb and used odin to flash kernel. Hope that works for you.
Or you could try this
One-Click UnBrick
it seems this is the job for a USB jig (I think)
Sent from my GT-I9100 using Tapatalk
Have you tried recovery firmware option via KIES?
Bah, just take out battery and put it back in and go to download mode and flash the firmware with Odin.
Thanks God i've got my Jig..
is it related with the limitation write of the NAND flash? quite worry about it..any idea?
You only need a jig if you can't get into download mode. Though from what I've read on here might be good to have to reset the flash counter.
Sent from my GT-I9000 using XDA Premium App
hansonator said:
You only need a jig if you can't get into download mode. Though from what I've read on here might be good to have to reset the flash counter.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
and pretty sure the OP said he can't get into download mode...hence the need for a jig...
Sent from my GT-I9100 using Tapatalk
Does the number of times flashed has anything to do with the failure? Is there a limit after which the hardware gets weaker?
Believe me. Most rom chefs or developers in here flash at least 500+ times (if they tested their product) and I don't think they have issue. (I flash my X1 at least a 1000+ times when I was a rom chef and it's still working great now)
Flash memory does have a life span on number or Read/write. But I doubt anyone here can reach that limit with 3+ yrs (by that time, you will probably get another phone).
Agreed its unlikely that 50 odd our even a few hundred rom flashes should damage your nand memory. Unless it was faulty in the first place
Sent from my GT-I9100 using XDA App
This problem..
..Was notorious on the Captivate. We lovingly referred to it "Phone ! Computer" screen.
The good news.. If you see this screen the level 1 boot loader is fine and you are only soft bricked.
If you ever plug in the phone to a power source with it turned off and you see nothing then you're screwed.
Same scenario as when you plug in a JiG and nothing happens.
budco2000 said:
My phone only shows a picture of a phone, with a yellow triangle, and a picture of a computer.
Click to expand...
Click to collapse
Hold and do not release the key combo for DLM, your phone will reboot about 3 times it should then enter DLM.
I did try this before your reply and no go, I tried again today, got the same screen, however Odin and kies, both saw the phone, went back to stock then back to cognition 1.31. My captivate, inspire, and infuse ive flashed over and over and over and never bricked a phone until my S2. It's back up and going strong now. Now im afraid to flash it again. This is best phone ever and im keeping it until the S3 comes out, so im trying to not render my S2 useless yet lol
Sent from my GT-I9100 using XDA Premium App
You've developed flashphobia?
Intratech said:
You've developed flashphobia?
Click to expand...
Click to collapse
For days, odin and kies didn't see phone no matter what I did. I'm not a developer, but I'm nowhere close to a rookie either. What ever happen was a hoax, because clockwork and download mode works as it should again. Next update for cognition i'll flash, i doubt anything will happen.
budco2000 said:
For days, odin and kies didn't see phone no matter what I did. I'm not a developer, but I'm nowhere close to a rookie either. What ever happen was a hoax, because clockwork and download mode works as it should again. Next update for cognition i'll flash, i doubt anything will happen.
Click to expand...
Click to collapse
**** happens. Flashes go right 99.9% of the time when you do everything right. You just hit that 0.1% where something went wrong during the flash.
Was trying to root my epic via QBKing77's youtube videos. I was at the point of trying to get ACS recovery on the phone. I already flashed the kernel-GB-3a.tar.md5. That worked fine. It wasn't getting clockworkmod installed on the phone. I tried it a couple of times still no dice. Tried flashing kernel-GB-3a.tar.md5 again and Odin did something weird. Anyways, now the screen on the phone shows a cell phone, an explanation point in orange, and a computer. Can anyone help me out?
You need to reflash the stock image/rom since odin screwed it up from a bad flash.
I think the easiest way would be to return to stock ec05 and reupdate and try it again with the battery and sd card out and use the computer as the power source. Put it in download mode and redo odin. Also odin did something weird please give me some more details.
Sent from my OG Epic
There's a problem with that. I can't get back into download mode on my phone. That picture with the cell phone, exclamation point in orange, and the computer is stuck on my phone.
You pulled the battery? If so leave it out give a while and try it again.
Sent from my OG Epic
Power button and the number 1 on the keyboard.....
Sent from my OG Epic
Biggoron said:
I think the easiest way would be to return to stock ec05 and reupdate and try it again with the battery and sd card out and use the computer as the power source. Put it in download mode and redo odin. Also odin did something weird please give me some more details.
Sent from my OG Epic
Click to expand...
Click to collapse
Sorry about the vagueness, I panicked and closed Odin before I read the errors.
Got this covered.
Sent from my OG Epic
OK, so here is the current situation. I've been searching, reading, and following different recovery procedures, but nothing seems to be working as it should, so now I'm posting here to get some guidance as to how to proceed.
I have a Verizon VS980. I had Malladus ROM 1.2.4 with furnace 0.1.0 kernel installed. I have Philz Touch recovery. I wanted to try out Sliding Lockscreen, but when I got installed and tried to reboot, my phone went into a boot loop. I booted to recovery and tried to restore a backup, but it said it couldn't find any backups... although I did have backups. This is when I started getting confused. I tried wiping cache and dalvik, no effect. I read through a bunch of threads here, tried a bunch of things that worked for other people, etc. Finally said screw it and did a factory reset through Philz. No joy. Tried several different methods to revert to stock. No joy. Oy vey.
So now the bottom line is it only gets to the LG screen with the LED doing its color changing thing, and thats it. Stops there. I CAN boot to Philz Touch recovery by power+vol. down, go through the factory hard reset menu, then it gets to Philz. Now, there has got to be a way to regain my phone from here. Like I said, I tried the 2 different methods to revert to stock... I can get all the way to the point it supposed to start flashing the stock ROM with the tot file method, but it just doesn't start flashing the ROM when its supposed to. Is there a way I can get a ROM from my computer to the phone? When I enter download mode (vol. up while plugging in USB), it says updating firmware, warns not to unplug while its updating, but its not doing anything at all, and at the bottom of the screen in a box it says something like "b100" in the top left corner of the box, and "ROOTED" in red letters at the bottom.
So, what in sam hell is going on with my phone, and how do I fix it? Is there a way to get either the stock ROM or Malladus from my computer to the phone so I can re-flash? I'm thinking thats all I need to do to get out of this.
Please... someone help a totally confused and now smartphone deprived guy? Please?
Dude, are u running the flash tool on pc while trying to flash stock rom? Just booting into download mode won't help. Or u can transfer a rom to a USB drive, connect it to ur mobile via OTG cable and then flash the rom via recovery
Sent from my LG-D802 using XDA Premium 4 mobile app
jaidev.s said:
Dude, are u running the flash tool on pc while trying to flash stock rom? Just booting into download mode won't help. Or u can transfer a rom to a USB drive, connect it to ur mobile via OTG cable and then flash the rom via recovery
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was able to revert to stock. After stepping away from the computer and phone, taking a cig break and a few deep breaths, I reread the tot revert instructions for 127th time. Found my mistake... I kept forgetting to change the com port to 41. Did that, revert worked just like it was supposed to for people who are not blind idiots who miss crucial little tidbits like that. I can't believe I kept missing that. COM Port 41 is ingrained in my memory forever. I may have to get a tattoo of it now.
I went so crazy trying to find the solution (yeah, didn't think of a flash drive either) because I was so determined not to have to resort to posting in the forum. The moment I give up... boom, I figure it out. Live and learn.....
Well, on to re-rooting the phone, re-flashing Malladus, and re-downloading all my crap...
Lol, happy to know that ur phone is back working, cheers mate
Sent from my LG-D802 using XDA Premium 4 mobile app