Database Users

[Q] MT3G 1.2 -the process android.process.acore has stopped unexpectedly at startup

Hi,
I have a tmobile mytouch 3g 1.2 (3.5mm jack phone). I tried to root my phone and it failed during the SYSTEM---UnZipping process. (it stuck there forever). I then looked at options of unrooting it. When I apply SAPPIMG.zip it says Main Version Older! Update Fail!
Then I reboot the phone in recovery mode (tried to reset to factory settings and then reboot). The phone gives me the below error upon startup. The only thing i can see is an notification bar.
the process android.process.acore has stopped unexpectedly. "FORCE CLOSE"
Please can someone help me how to get my phone working? Appreciate all your help!

If you go to tmobile.com then go to there forum under android development you will see a topic called how to unroot the mytouch. In that topic they have a link for the original sappimg .. download to your zip cars in the root of the card (no folders) then just boot into hboot and apply the sappimg. I have done it many times so I know it works. Then when you go to root your just us the universal androot method. Feel few to pm me i
ent from my HTC Magic using XDA App

Type this in fastboot:
Code:
fastboot getvar version-main
Then we can try to see if we can update it.
If not, you can always try to flash RUU.
The system starts, that's a good thing -> you have adb access!
Just don't go around and flash all kind of sapphire.nbh/zip...
Wait intil you have the right info :0)

I have had this problem and solved it. I would either get this acore stopped working error or just a loop in the boot screen. I think what caused this is there is not enough internal room for the ROM and gapps. Make sure you wipe everything. Do you have a nandroid backup? Can you get into recovery? Which recovery do you have installed? Do this, make a goldcard. Use fastboot to reroot the phone because you may have halfway unrooted it and made root useless. Boot into recovery and wipe. Install from sd any MyTouch ROM without Gapps. This should get you into the OS and now you can use other methods of getting your phone back. When I got here I used nandroid backup to get my phone back to a date it was when it worked and have had no problems since.

mumilover said:
Type this in fastboot:
Code:
fastboot getvar version-main
Then we can try to see if we can update it.
If not, you can always try to flash RUU.
The system starts, that's a good thing -> you have adb access!
Just don't go around and flash all kind of sapphire.nbh/zip...
Wait intil you have the right info :0)
Click to expand...
Click to collapse
I tried the command - fastboot getvar version-main
it just says < waiting for device > and then nothing happens...
also when i run the adb devices command, it does not display my devices. (But i have the number noted down when i tried to root the phone which failed...) can this number be used in any manner for anything

housry23 said:
I have had this problem and solved it. I would either get this acore stopped working error or just a loop in the boot screen. I think what caused this is there is not enough internal room for the ROM and gapps. Make sure you wipe everything. Do you have a nandroid backup? Can you get into recovery? Which recovery do you have installed? Do this, make a goldcard. Use fastboot to reroot the phone because you may have halfway unrooted it and made root useless. Boot into recovery and wipe. Install from sd any MyTouch ROM without Gapps. This should get you into the OS and now you can use other methods of getting your phone back. When I got here I used nandroid backup to get my phone back to a date it was when it worked and have had no problems since.
Click to expand...
Click to collapse
i did not take any nandroid backup ...i got into revovery boot...but whn i did the wipe clean option and reboot i get this error.
to make a gold card i would need to have the USB debugging enabled right? I am not able to go past the error screen (Home does not work, settings does not work )
and when i run the adb devices command, it does not display my devices. (But i have the number noted down when i tried to root the phone which failed...)
is there any other way to enable the USB Debugging as I am not able to open settings or even see anything on my phone...?
Would there be any option that's something like doing a System Restore to an earlier date on Windows OS on the computer?
please let me know the next steps...appreciate all of your help...

It's driver related.
Fix the drivers and try again to run the commands.

mumilover said:
It's driver related.
Fix the drivers and try again to run the commands.
Click to expand...
Click to collapse
You mean re-install the USB drivers for mytouch 3g? i tried that but still nothing happens...

Well you have to...
In fastboot mode this command shall give you the device nr .
Code:
fastboot devices
If not, the drivers are still bad!
You could also try to do a HARD RESET from hboot ( volume - together with power)...

mumilover said:
Well you have to...
In fastboot mode this command shall give you the device nr .
Code:
fastboot devices
If not, the drivers are still bad!
You could also try to do a HARD RESET from hboot ( volume - together with power)...
Click to expand...
Click to collapse
Thanks for the steps. I got the version details.
by executing the fastboot getvar version-main in fastboot mode.
version-main: 2.53.707.2
finished. total time: 0.001s
What will be the next steps...how to I update?

ganesh.raj.ms said:
Thanks for the steps. I got the version details.
by executing the fastboot getvar version-main in fastboot mode.
version-main: 2.53.707.2
finished. total time: 0.001s
What will be the next steps...how to I update?
Click to expand...
Click to collapse
Hey, i tried the below. can you please let me know if this is correct? and what do i do next?
userdebug-img-14721_1.zip
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: 1.33.0013
Baseband Version.....: 2.22.23.02
Serial Number........: HT03TPB01582
--------------------------------------------
checking product... FAILED
Device product is 'sapphire'.
Update requires 'trout'.
finished. total time: 0.042s
how do i try to rectify the checking product...FAILED???

OK....
Let's get the facts right.
You tried to root with wrong guide.
The sapphire.zip/nbh image you used if for the 32A.
How do i know that ?
Well the main version nr tells me that you have flashed this:
2.53.707.2 SEA WWE test-signed (from this page: http://forum.xda-developers.com/showthread.php?t=659403)
That's why you have troubles!
The solution....
I need all your fastboot info.. ALL.
Then i can figure out what to do. Or else i will work in the dark...

mumilover said:
OK....
Let's get the facts right.
You tried to root with wrong guide.
The sapphire.zip/nbh image you used if for the 32A.
How do i know that ?
Well the main version nr tells me that you have flashed this:
2.53.707.2 SEA WWE test-signed (from this page: http://forum.xda-developers.com/showthread.php?t=659403)
That's why you have troubles!
The solution....
I need all your fastboot info.. ALL.
Then i can figure out what to do. Or else i will work in the dark...
Click to expand...
Click to collapse
Is it the below that you want?
[FONT=&quot]SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009,22:33:27[/FONT]

Yes...
You have the right radio/spl combo. That's good.
The problem is that your main version is set to high.
If you try to flash any RUU for the 1.2 magic, you will get main-version older error...
Even if you use a goldcard.
Do you still have access to adb?
Even for a little... then we can flash a custom recovery and get the system back.
Even if your system don't start up... as long you can boot more then 20 sec and you don't get reboots.
If not, then we have to flash a 32A sappimg.zip using a goldcard.
From there we flash custom recovery. Then eng spl. Then flash system,boot, userdata. Then flash the 1.2 spl... Then we are done :0)
So it's a long one... but first test if we have adb access.
Code:
adb devices

mumilover said:
Yes...
You have the right radio/spl combo. That's good.
The problem is that your main version is set to high.
If you try to flash any RUU for the 1.2 magic, you will get main-version older error...
Even if you use a goldcard.
Do you still have access to adb?
Even for a little... then we can flash a custom recovery and get the system back.
Even if your system don't start up... as long you can boot more then 20 sec and you don't get reboots.
If not, then we have to flash a 32A sappimg.zip using a goldcard.
From there we flash custom recovery. Then eng spl. Then flash system,boot, userdata. Then flash the 1.2 spl... Then we are done :0)
So it's a long one... but first test if we have adb access.
Code:
adb devices
Click to expand...
Click to collapse
adb devices does not give me anything...its not working

Does the computer recognise the device?
Maybe it's driver related...
PS: check your pm

My DHD is nearly bricked. Please help.

I have a T-Mobile UK DHD that I'd fully rooted, Eng-Off, Radio S-Off & SuperCID
I was running a LeeDroid ROM but yesterday it began frequently locking up so I tried to do a wipe and reinstall the ROM but at the end of the ROM installation after "Writing boot.img" it said:
assert failed: write_raw_image ("/tmp/boot.img","boot")
E:Error in /sdcard/LeeDrOiD_HD_V2.0.0.zip
(Status 7)
Installation aborted.
I also kept getting the messages E:Can't mount CACHE:recovery/log & E:Can't open CACHE:recovery/log
I then tried to install the stock 1.32 RUU but that stuck at the Updating User Data stage at 40%.
I'm now stuck with the bootloader options and simply have a white screen with the below and warning triangles bottom left & right.
ACE PVT SHIP S-OFF
HBOOT-0.85.0007
MICROP-0438
RADIO-26.04.02.17_M2
eMMC-BOOT
Oct 11 2010, 12:47:02
RUU (This is highlighted yellow)
I have tried ADB but the device isn't shown as attached. However, Fastboot shows it attached but I've had no success pushing the ROM this way either. Below is copy of the cmd window:
C:\AndroidSDK\tools>fastboot boot PD98IMG.zip
creating boot image...
creating boot image - 301006848 bytes
downloading 'boot.img'...
OKAY [ 47.302s]
booting...
FAILED (remote: not allowed)
finished. total time: 47.302s
Can anyone offer any assistance as I've run out of ideas and fear I've bricked it.

you cant just flash rom via ADB. you need recovery. Do you have clockwork mod recovery?

The message you get about being unable to write boot suggests you are no longer S-off, whilst bootloader suggests you have s-off, l would start from scratch and s-off again and then try reinstalling the rom

20mark said:
you cant just flash rom via ADB. you need recovery. Do you have clockwork mod recovery?
Click to expand...
Click to collapse
I used to but it's been wiped as part of the the failed RUU installation. Power On/Vol Down now does nothing
ghostofcain said:
The message you get about being unable to write boot suggests you are no longer S-off, whilst bootloader suggests you have s-off, l would start from scratch and s-off again and then try reinstalling the rom
Click to expand...
Click to collapse
Do you mean Eng or Radio off? Can I do that with no bootloader options or recovery?
How would you suggest installing the ROM and which one?
Thanks for any advice.

I've just tried jkolo's easy S-Off tool but I get an error message pop-up "Module or hboot fail. Aborting."

So what happenes when you choose the recovery option?
Oh and btw don't worry too much about the void warranty, I've read of a few people who've had to send phones back to HTC without being able to revert to stock first and they've been successful - obviously this is a last resort.

EmprtArea said:
So what happenes when you choose the recovery option?
Click to expand...
Click to collapse
I don't have a recovery option on the Phone.

So can you use fastboot to do this successfully?
fastboot erase recovery
fastboot flash recovery clockwork-recovery.img
If you need the image it here: http://mirror1.kanged.net/recoveries/recovery-clockwork-3.0.0.6-ace.img

EmprtArea said:
So can you use fastboot to do this successfully?
fastboot erase recovery
fastboot flash recovery clockwork-recovery.img
Click to expand...
Click to collapse
I haven't tried that yet but fear the 1st line may wipe my only way of communicating if the 2nd part doesn't work

well you say you haven't got the recovery option anyway, so you could leave that line out I only put it because that's what I'd do.
HOWEVER: I'm no expert.
Question after Re-reading your post: Are you worried you'll delete fastboot? I'm sure that's not what I'm suggesting. But as it's your £500 device wait for someone else to confirm.

EmprtArea said:
So can you use fastboot to do this successfully?
fastboot erase recovery
fastboot flash recovery clockwork-recovery.img
If you need the image it here: http://mirror1.kanged.net/recoveries/recovery-clockwork-3.0.0.6-ace.img
Click to expand...
Click to collapse
No luck
Code:
C:\AndroidSDK\tools>fastboot flash recovery recovery-clockwork-3.0.0.6-ace.img
sending 'recovery' (3334 KB)...
OKAY [ 0.560s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.562s

Everytine you try writing it fails what else can you do?
Sent from my Desire HD using XDA App

I'd jump to thinking you're not ENG S-Off anymore (got to say probably the failed 1.32 flash that did it. And you can't use that tool so look for an alternative description of how to get there.
If you can't use ADB I don't know how to get there.
If somehow ADB does start working then the CyanogenMod wiki might be useful.
http://wiki.cyanogenmod.com/index.php?title=HTC_Desire_HD:_Full_Root_Guide

If you lost s-off while flashing the 1.32 rom then I also suspect you lost root.
Sent from my Desire HD using XDA App

I've got backups of:
hboot_original.bin & part7backup-1294609557.bin
Are they of any help?
I can't see any way to gain Eng-Off without root so I'm at a loss.
The frustrating thing is I don't know what happened in the 1st place that froze my phone and kicked all this off. I'm guessing I have a hardware fault of some sort
Would T-Mobile exchange or repair under warranty, despite the mods I'd made?

Aamir.Badat said:
If you lost s-off while flashing the 1.32 rom then I also suspect you lost root.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I'm starting to regret trying that as a solution now

I remembered something similar being posted on these forums a few months ago, so I had a search and found this thread:
http://forum.xda-developers.com/showthread.php?p=9139950
I'm not an expert on these things, so I don't know if this would work for you. I would suggest waiting for someone with a bit more experience than me to join the discussion, as I don't know how similar your circumstances are to the ones in that thread. Do you get any error messages on your PC when you run the RUU? I take it that it finds your phone, whereas in the thread above the RUU wasn't seeing the phone.
However I thought reading that might give you some hope. Worth reading the thread all the way through.

I think what disabled most of your options was flashing a stock ruu. It overwrites hboot and the recovery.
Edit: since the ruus fail installing, maybe someting is off with your device, NAND error or someting.

this sort of thing doesnt happen if you are flashing custom roms though right? its making me nervous now!

preacher65 said:
I remembered something similar being posted on these forums a few months ago, so I had a search and found this thread:
http://forum.xda-developers.com/showthread.php?p=9139950
I'm not an expert on these things, so I don't know if this would work for you. I would suggest waiting for someone with a bit more experience than me to join the discussion, as I don't know how similar your circumstances are to the ones in that thread. Do you get any error messages on your PC when you run the RUU? I take it that it finds your phone, whereas in the thread above the RUU wasn't seeing the phone.
However I thought reading that might give you some hope. Worth reading the thread all the way through.
Click to expand...
Click to collapse
Thanks for the tip. I'll have a read and may give that a go.
KamikaZeeFu said:
I think what disabled most of your options was flashing a stock ruu. It overwrites hboot and the recovery.
Edit: since the ruus fail installing, maybe someting is off with your device, NAND error or someting.
Click to expand...
Click to collapse
I don't get errors, the RUU just freezes and I have to pull the plug.
danrobz said:
this sort of thing doesnt happen if you are flashing custom roms though right? its making me nervous now!
Click to expand...
Click to collapse
The errors started when I was on a Custom ROM but my suspicion is that it's a hardware fault to blame. If I can't fix this then whilst the custom ROM probably didn't cause the damage, the general unlocking etc may have voided my warranty.

[Q] HTC Magic 32A (No recovery only flash mode enabled almost bricked)

Hi,
I almost killed my HTC Magic when trying to upgrade it, Its locked with loop boot unable to enter recovery mode all i can do is just to get into fastboot mode
Help me to completely wash out the remaining stuff and write an new ROM to Magic
through flash boot i believe my usb drivers are detected in flash boot
Pls walk me through
Help me thx!!!!!!

You should go to fastboot and flash another recovery and then you can go to recovery.

hanntbk said:
You should go to fastboot and flash another recovery and then you can go to recovery.
Click to expand...
Click to collapse
Thanks for your support
It will be great if you can provide me the files required & tutorial it will be really helpfull

vijay2network said:
Thanks for your support
It will be great if you can provide me the files required & tutorial it will be really helpfull
Click to expand...
Click to collapse
Here: http://forum.xda-developers.com/showthread.php?t=1059911
this is the tutorial and files to flash recovery

danger_tweaker said:
Here: http://forum.xda-developers.com/showthread.php?t=1059911
this is the tutorial and files to flash recovery
Click to expand...
Click to collapse
Hey I'm seriously noob when its coming to HTC.
I dnt even know how fast boot mode works, If you can guide me through brief tutorial that should help me
Seriously dnt understand that tutorial, All i have done is boot phone to flash boot mode and waited PC to detect it, I dnt know what exactly should i do after connecting it

First open CMD.exe (command/ black box)
type cd and the go to were the files are located so if you put them in the map android on your c: drive it's cd c:\android
then connect your phone and copy/paste the codes from that post.

PowerPlop said:
First open CMD.exe (command/ black box)
type cd and the go to were the files are located so if you put them in the map android on your c: drive it's cd c:\android
then connect your phone and copy/paste the codes from that post.
Click to expand...
Click to collapse
Hey thanks for the quick post
I'm also wondering all the post abt flasboot has some tools like "SDK" "adb"
Do i need similar tools to proceed with this ??!!

Follow this tutorial to install what you need.
It's for installing ADB and Fastboot.

PowerPlop said:
Follow this tutorial to install what you need.
It's for installing ADB and Fastboot.
Click to expand...
Click to collapse
Do i need to install adb or flashboot to work on this scenario?
If anyone can guide me remotely it would be great.

vijay2network said:
Do i need to install adb or flashboot to work on this scenario?
If anyone can guide me remotely it would be great.
Click to expand...
Click to collapse
of course, guidance it already exists on the link provided by PowerPlop

I tried to flash the CWM recovery from my PC through CLI, Below is the error poped when i tried to boot or flash from image
C:\Downloads\Browser Download>fastboot boot recovery-clockwork-3.0.2.8-bravo.img
downloading 'boot.img'... FAILED (remote: not allow)
finished. total time: 0.002s
C:\Downloads\Browser Download>fastboot flash recovery-clockwork-3.0.2.8-bravo.im
g
unknown partition 'recovery-clockwork-3.0.2.8-bravo.img'
error: cannot determine image filename for 'recovery-clockwork-3.0.2.8-bravo.img
I tried downloading recovery img from "http://forum.xda-developers.com/showthread.php?t=1059911" thread but the link has expired
Hence i download this image from 4shared, Not sure this is the correct rom or not.
Help me after this

This happened because you flashed bravo recovery and not the 32a recovery.
follow the link provided by danger_tweaker post no. 4
everything is properly explained in and download your recovery "carz-clockworkmod-3.0.2.8-recovery.zip" only or if you are able to turn on device then download ROM Manager and flash recovery because htc magic are legacy(old,outdated) devices so file are removed from most of the sites.
BTW have you ever flashed the recovery???

I had searched for your recovery but all links are expired. View attachment 1161540 See if this recovery works for you. I had downloaded it long back and currently I don't have any previous version of carz mod :angel:, neither I remember its source link . It is the same clockwork mod-carz-recovery only version is different v4.0.1.4 see if it flashes through fastboot :fingers-crossed:.

vijay2network said:
C:\Downloads\Browser Download>fastboot flash recovery-clockwork-3.0.2.8-bravo.im
g
unknown partition 'recovery-clockwork-3.0.2.8-bravo.img'
error: cannot determine image filename for 'recovery-clockwork-3.0.2.8-bravo.img
Click to expand...
Click to collapse
That's not working because your command is wrong, you forgot one "recovery". He's telling you that there is no partition named "recovery-clockwork-3.0.2.8-bravo.img" because the correct name is "recovery". The correct command would be
Code:
fastboot flash [COLOR="Red"]recovery[/COLOR] recovery-clockwork-3.0.2.8-bravo.img
But i think you'll also get "FAILED (remote: not allow)".
I think you need to tell us what's written in your fastboot screen on the phone. Also a
Code:
fastboot getvar version-main
would be helpful.

C:\Android>fastboot flash recovery clockwork-3.0.2.8.img
sending 'recovery' (3806 KB)... FAILED (remote: not allow)
finished. total time: 0.001s
C:\Android>fastboot getvar version-main
version-main: 3.05.720.3
finished. total time: 0.002s
As u said i got the same error
I worked on gold card mode and try updating using "sappimg.zip"
I get "Incorrect CID" as error even after me making an exact gold card asper the tutorial @ http://wiki.cyanogenmod.com/wiki/Howto:_Create_a_Goldcard
Help me ASAP

You get this error "FAILED (remote: not allow)" because of your SPL-version - it seems to be a perfect one, you can't flash your phone with commandline.
Show us what's written in your fastboot-menu (everything, radio, hboot and so on, everything you can see).
Also give us the output of
Code:
fastboot getvar cid
please.
When did you get this error "Incorrect CID"?
Do you have some other Android-phone? Then create your Goldcard with GoldCardTool (for example as explained here).
Which sappimg.zip did you try? Don't just take one without knowing if you can take it!

1. Output for command
C:\Android>fastboot getvar cid
cid: HTC__038♦
finished. total time: 0.001s
2. Attached the screen shot of HBoot & Fastboot mode
3. I have an S2 i managed to fetch the CID using SimpleGoldCard_v1.zip from http://dl.xda-developers.com/attach...d6/4ff07379/5/2/8/8/9/6/SimpleGoldCard_v1.zip
4. I slected mmc1 in the tool to detect my MMC CID to be changed to gold card
5. I used ROM v2.16.707.3 (NON-Perfected stock SPL v1.33.0009 from this http://forum.xda-developers.com/showthread.php?t=548218
I believe i have provide u all information i have got. Please provide me support ASAP :highfive:

Snapshots
http://www.image-share.com/ijpg-1592-111.html
http://www.image-share.com/ijpg-1592-112.html
http://www.image-share.com/ijpg-1592-113.html

I can't open the screenshots you attached, sorry.
edit: You posted while i did - ok!
---------- Post added at 04:15 PM ---------- Previous post was at 03:52 PM ----------
As i said, because of the SPL-version you can't flash with commandline. You have to use sappimg.zip or nbh. To flash those, the rom needs to have a higher version than the installed one.
Your main-version is 3.05.720.3, as you see here a higher version would be "3.05.861.2 Hutchinson Australia". To flash this you need the Goldcard - it lets you install roms of different providers.
Download that rom, copy it to your SD-card (Goldcard) and rename it to SAPPIMG.zip and try to flash it. If it still tells you "CID incorrect" your Goldcard isn't created correct or the SD-card doesn't work as Goldcard.
If you finished this we're going on. Just short:
When you're done your phone should boot the normal way. Now you need to get the correct rom for your CID on it - 39) 3.05.720.3 1.76.0009H 6.35.08.29 N HTC__038 is for your phone, it's that one 3.05.720.3 India.
You can't flash this as sappimg.zip because the version of this rom is lower than the installed one. You need to install a custom-recovery on your phone to be able to install any rom-version - to install this you need to root your phone (there are some tutorials on XDA). With the custom-recovery you're going to install the stock-rom and you're done. If you like to you can also install custom-roms on your phone - you just need to install a custom-recovery again to install that.
I'm not an expert - i just know what i read and experienced when i debricked my HTC magic. If somebody thinks i'm wrong with my suggestions, just tell! :laugh:

matzehtc said:
I can't open the screenshots you attached, sorry.
edit: You posted while i did - ok!
---------- Post added at 04:15 PM ---------- Previous post was at 03:52 PM ----------
As i said, because of the SPL-version you can't flash with commandline. You have to use sappimg.zip or nbh. To flash those, the rom needs to have a higher version than the installed one.
Your main-version is 3.05.720.3, as you see here a higher version would be "3.05.861.2 Hutchinson Australia". To flash this you need the Goldcard - it lets you install roms of different providers.
Download that rom, copy it to your SD-card (Goldcard) and rename it to SAPPIMG.zip and try to flash it. If it still tells you "CID incorrect" your Goldcard isn't created correct or the SD-card doesn't work as Goldcard.
If you finished this we're going on. Just short:
When you're done your phone should boot the normal way. Now you need to get the correct rom for your CID on it - 39) 3.05.720.3 1.76.0009H 6.35.08.29 N HTC__038 is for your phone, it's that one 3.05.720.3 India.
You can't flash this as sappimg.zip because the version of this rom is lower than the installed one. You need to install a custom-recovery on your phone to be able to install any rom-version - to install this you need to root your phone (there are some tutorials on XDA). With the custom-recovery you're going to install the stock-rom and you're done. If you like to you can also install custom-roms on your phone - you just need to install a custom-recovery again to install that.
I'm not an expert - i just know what i read and experienced when i debricked my HTC magic. If somebody thinks i'm wrong with my suggestions, just tell! :laugh:
Click to expand...
Click to collapse
Hi thx for ur quick reponse, The latest image what u said "3.05.861.2 Hutchinson Australia" is in ".exe" format
how do i proceed with it :-/

need original desire hd rom

hello i need the original rom but i need it to install from bootloader i cant open my phone its stucks on htc logo and on restore or factory its gone in clockworkmod.how i can restored all by default bootloader and rom?

Run a RUU
Sent from my Desire HD with BlackIce.
Thanks don't hurt ya know?!

UPDATE:
Working solution found in this post:
http://forum.xda-developers.com/showpost.php?p=30379379&postcount=30
glykas said:
hello i need the original rom but i need it to install from bootloader i cant open my phone its stucks on htc logo and on restore or factory its gone in clockworkmod.how i can restored all by default bootloader and rom?
Click to expand...
Click to collapse
Download the RUU corresponding to your phone's region from the following link:
http://www.filefactory.com/f/efa28fefafc4af9c/
Run the RUU on your PC with your DHD connected via USB.
This will restore your DHD to default.

xbiggyl said:
Download the RUU corresponding to your phone's region from the following link:
http://www.filefactory.com/f/efa28fefafc4af9c/
Run the RUU on your PC with your DHD connected via USB.
This will restore your DHD to default.
Click to expand...
Click to collapse
you know what is from eu greece?before i have a 2.3.5.it is unlocked for all network by default.

GuyInTheCorner said:
Run a RUU
Sent from my Desire HD with BlackIce.
Thanks don't hurt ya know?!
Click to expand...
Click to collapse
i dont want to install a custom case i need from warranty to restore as default.but thanks.

glykas said:
i dont want to install a custom case i need from warranty to restore as default.but thanks.
Click to expand...
Click to collapse
RUU is a full return to stock. Stock recovery, stock ROM, remove Super CID & S-ON
Sent from my Desire HD with BlackIce.
Thanks don't hurt ya know?!

i try with that firmware RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed
i boot in bootloader on hboot and say low battery 30%
i try from fastboot and say update from 3.13.0.0 to 3.12.405.1 go next and want for delete and sending,signature update and say error [140]

Recharge your phone to more than 50% and then try again.
Before you run the RUU you have downloaded, go into bootloader mode.
In case you have damaged your bootloader and cannot access CWM, you will have to push the PD98IMG using fastboot.
Sent from my HTC One X using Tapatalk

the S-ON is on and my battery is 100% but say again that.can fault the custom rom to i try before to install?i have a backup with my dhd files md5
restore with no extension but i dont know how i can restore.im noob..

I'm not sure if I understood you correctly. Did you make a nandroid backup? Also, are able to enter recovery mode?
If you can access clockworkmod and have already madea nandroid backup all you have to do is restore it from your sdcard usin CWM.
Let me know if I understood u correctly.
Sent from my HTC One X using Tapatalk 2

xbiggyl said:
I'm not sure if I understood you correctly. Did you make a nandroid backup? Also, are able to enter recovery mode?
If you can access clockworkmod and have already madea nandroid backup all you have to do is restore it from your sdcard usin CWM.
Let me know if I understood u correctly.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
now i cant when i go factory or restore its gone on htc logo and stuck.my baterry is full and say again 30% cant do anything. :/ my bootloader is unlocked but s-on.what i can do? :/

only i can open is bootloader hboot or fastboot restore and factory reset not work.the ruu not work RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed in hboot say low battery and fastboot error when installing.

i reinstall the clockworkmod i install the http://themikmik.com/showthread.php...F-SAID!!!-4-0-4-Sense-3-6&p=218030#post218030 and again stuck on htc white logo..i put it on sd and install from clockworkmod install zip from sdcard and choose zip from sdcard select install yes.and on install all yes full wipe but on restart stuck

glykas said:
i reinstall the clockworkmod i install the http://themikmik.com/showthread.php...F-SAID!!!-4-0-4-Sense-3-6&p=218030#post218030 and again stuck on htc white logo..i put it on sd and install from clockworkmod install zip from sdcard and choose zip from sdcard select install yes.and on install all yes full wipe but on restart stuck
Click to expand...
Click to collapse
You should not install FullWipe AFTER you flash the ROM.
Flash FullWipe first, THEN flash the ROM.
Try it and let me know.

xbiggyl said:
You should not install FullWipe AFTER you flash the ROM.
Flash FullWipe first, THEN flash the ROM.
Try it and let me know.
Click to expand...
Click to collapse
i do it but nothing change can fault my hboot case it is 2.00.0029 and another and before it is 2.00.0027 or not?radio is 26.10.04.28_M
i find why not work custom im not s-off and i cant s-off case phone not open into android.can s-off in bootloader?
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011

i try that
plug the phone in fastboot, you should see fastboot usb in red.
Open a cmd as admin or terminal as root in the pc
type: fastboot oem rebootRUU (you will get a black splash with silver htc)
fastboot flash zip "nameoffile.zip" (no quation marks)
Once it is done (it says OKAY. finished in the CMD session)
fastboot reboot
C:\android-sdk-windows\platform-tools>fastboot flash zip PD98IMG1.zip
sending 'zip' (293949 KB)...
OKAY [ 48.251s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version...
FAILED (remote: 43 main version check fail)
finished. total time: 102.855s
ihave that file from DHD if that can help to say me what i do with that
http://www.mediafire.com/download.php?842svi6net2lui6

You need to downgrade first!! I can see from your logs that you haven't done so.
Follow the following guide STEP BY STEP! Don't skip anything!
http://driphter.com/3867/guide-downgrade-root-radio-eng-s-off-dhdinspire-4g-in-9-steps/
This is going to solve it for you..
Good Luck

xbiggyl said:
You need to downgrade first!! I can see from your logs that you haven't done so.
Follow the following guide STEP BY STEP! Don't skip anything!
http://driphter.com/3867/guide-downgrade-root-radio-eng-s-off-dhdinspire-4g-in-9-steps/
This is going to solve it for you..
Good Luck
Click to expand...
Click to collapse
i cant do that step it is first.my phone is not booting up to do anything..only i can do is on bootloader,clockworkmob and my pc.
http://www.addictivetips.com/mobile/how-to-make-gold-card-for-htc-desire-hd/

ok i try to install RUU_ACE_SENSE30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed from sd i put it and i rename it PD98IMG.zip reboot in hboot check the firmware and say main version is older! update fail! press <POWER> to reboot.
any help?what i can do?i thing that is is the fault hboot 2.00.0029
but i dont know how to downgrade it case the plone not boot stuck on boot logo white htc

Now I understand, follow this guide:
http://forum.xda-developers.com/showthread.php?t=1396253
Let me know what happens..
Good Luck
Sent from my HTC One X using Tapatalk 2

HTC Magic - half bricked - RUU USB

Hello,
can anyone suggest how to recover HTC magic after flashing Rogers RUU official over custom rom.
ROM update was aborted on updating system partition.
Problem is that I can't upload any part of rom because phone is now S-ON. I'am getting signature error.
Flashed RUU: 42) [xda-ftp] [4shared] 3.54.631.3 Rogers Canada + [SAPPIMG.ZIP format]
ADB is no longer possible. Only FASTBOOT and RUU USB.
See attched photo for fastboot details.
Thanks in advance.

pero256 said:
Hello,
can anyone suggest how to recover HTC magic after flashing Rogers RUU official over custom rom.
ROM update was aborted on updating system partition.
Problem is that I can't upload any part of rom because phone is now S-ON. I'am getting signature error.
Flashed RUU: 42) [xda-ftp] [4shared] 3.54.631.3 Rogers Canada + [SAPPIMG.ZIP format]
ADB is no longer possible. Only FASTBOOT and RUU USB.
See attched photo for fastboot details.
Thanks in advance.
Click to expand...
Click to collapse
I went through a similar problem. My 32A was in the same state except for the radio; I had no system installed, S-ON, RUU mode, and a radio/spl mismatch. It looks like you at least have a proper radio/spl combo.
Before we do anything else, try flashing the RUU again. Were you using the ZIP file or the EXE? Use the ZIP, at least you won't have to load up that crappy HTC interface.
If the RUU fails again, see if you can find the log file from the installation. It'll be on your system's drive, probably in "C:\ruu_log" or something like that. It can tell us what error it found.
In my case, we (mumilover and I) had to upgrade HBOOT and "sort of unlock it" using HTCDEV's method. Then we were able to install a custom recovery, and then everything got very easy.
Let's see if the simple things work before we have to do the harder things

Thnak you very much for hint with HTCDEV. Now I have at least fastboot
RUU image allways fail at signature error. OI have tried three of them. Same error.
I have run RUU under fastboot usb.
Also I can't flash recovery image even I have successfully unlocked hboot with htcdev.
C:\ADB>fastboot flash recovery recovery-clockwork-2.5.0.7-magic.img
sending 'recovery' (2642 KB)... OKAY [ 0.923s]
writing 'recovery'... FAILED (remote: not allow)
finished. total time: 0.926s
Any other idea ?

pero256 said:
Thnak you very much for hint with HTCDEV. Now I have at least fastboot
RUU image allways fail at signature error. OI have tried three of them. Same error.
I have run RUU under fastboot usb.
Also I can't flash recovery image even I have successfully unlocked hboot with htcdev.
C:\ADB>fastboot flash recovery recovery-clockwork-2.5.0.7-magic.img
sending 'recovery' (2642 KB)... OKAY [ 0.923s]
writing 'recovery'... FAILED (remote: not allow)
finished. total time: 0.926s
Any other idea ?
Click to expand...
Click to collapse
Could you give me the new details of the fastboot page? Your HBOOT version will have changed, and it will say "UNLOCKED" or "RELOCKED" at the top and S-ON. If it says "RELOCKED", try running the HTCDEV unlock command from fastboot again (you should still have the Unlock_code.bin file in your email) and then reboot.
Let's see how that goes.

DasBub said:
Could you give me the new details of the fastboot page? Your HBOOT version will have changed, and it will say "UNLOCKED" or "RELOCKED" at the top and S-ON. If it says "RELOCKED", try running the HTCDEV unlock command from fastboot again (you should still have the Unlock_code.bin file in your email) and then reboot.
Let's see how that goes.
Click to expand...
Click to collapse
I have attached Fastboot details.Status is: UNLOCKED.
But when I try to flash recovery I get an error message which I already wrote.
I think it is because of S-ON which is checking signature.

pero256 said:
I have attached Fastboot details.Status is: UNLOCKED.
But when I try to flash recovery I get an error message which I already wrote.
I think it is because of S-ON which is checking signature.
Click to expand...
Click to collapse
Sounds reasonable. I wish I kept better notes That way I wouldn't have to re-learn things every time.
I just want to make sure I understand the timeline of events:
You said you tried to flash an RUU over an existing custom ROM install, right?
What was the configuration of your phone before you tried the RUU and ran into trouble? If you were running a custom ROM, did you have a magic SPL or a custom recovery in order to install that custom ROM?
Anyway, on to the work:
Let's see if we can get an RUU to work now.
Go to the command prompt and run "fastboot getvar version-main" and let us know what it is, for future reference.
Once we know that, we can find a higher-numbered RUU from this list of Official RUUs.
I think I ended up using BrightStar Brazil, but anything higher than your phone's reported main version should work.
Have you made a goldcard? If you try to use an RUU and it complains about your CID, this will help.
Before you try to install an RUU, you will need to relock the bootloader using "fastboot oem lock" (you'll be able to unlock it again using the Unlock_token.bin)
Place the SAPPIMG.zip of the RUU in the root folder of your SD card and reboot into HBOOT (or reboot to fastboot and select HBOOT).
After a few seconds it should start scanning your SD card and then it will try to use the SAPPIMG.
Let us know.

Yes I had custom rom with s-off. But can't remeber which version.
Than I tried to install RUU: 42) [xda-ftp] [4shared] 3.54.631.3 Rogers Canada + [SAPPIMG.ZIP format]
Than I get error while flashing.
Strange thing is that I get this now:
C:\ADB>fastboot getvar version-main
version-main: 3.54.0.0
finished. total time: 0.001s
So it seems that I have lower version than I tried to install
I didn't try to use goldcard for now.

I have created Gold Card using this link: http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
I have to use another HTC phone (Wildfire) to get CID from HTC Magic SD card
I have tried to put 3.54.631.3 Rogers Canada rom as SAPPIMG.zip but HBOOT claims that there is no image.
I get: Loading...(SAPPIMG.zip) No image!

I forget to say that I have set HBOOT to RELOCKED state before using GOLD CARD and SAPPIMG.zip

pero256 said:
I forget to say that I have set HBOOT to RELOCKED state before using GOLD CARD and SAPPIMG.zip
Click to expand...
Click to collapse
1) Check the filename. Make sure it is "SAPPIMG.zip" exactly, with SAPPIMG in capital letters.
2) Run these fastboot commands and then switch back to HBOOT mode.
Code:
fastboot oem enableqxdm 0
fastboot oem eraseconfig
This procedure has fixed SD card problems in the past.
3) Check the SD card using a computer or another phone to be sure that the file is on the card. I've had Windows unmount the card improperly a few times, so that's a possibility.
4) Compare a checksum of the original ZIP file to the checksum of the ZIP on your SD card. I use 7-Zip to get the checksum, but there are other ways.
5) You can download another copy of the SAPPIMG.zip file.
It also helps to wave a dead chicken over the phone as an offering to the phone god.

Unfortuntly can't get goldcard to work.
I have used 3 different SD card.
1. 2GB
2. 2GB
3. 1GB
Non of them works.
Also everything is fine in the process of creating them.
Problem is about loading to phone SAPPIMG.zip of 3.54.631.3 Rogers Canada rom.
Phone starts to Checking..(SAPPIMG.zip) and then after some period of time stops and waits to press:
1. (back) FastBoot Mode
2. (send) Simlock
I have try to start another flash but get the same result.
So it seems that the gold card is not working as it should because phone is still checking uploaded rom image.

Is there some SD card that works 100% ?

pero256 said:
你好，
任何人都可以建议如何在通过自定义 rom 刷新 Rogers RUU 官方后恢复 HTC 魔法。
ROM 更新在更新系统分区时中止。
问题是我无法上传 rom 的任何部分，因为手机现在是 S-ON。我收到签名错误。
闪烁的 RUU：42) [xda-ftp] [4shared] 3.54.631.3 Rogers Canada + [SAPPIMG.ZIP 格式]
亚行不再可能。只有 FASTBOOT 和 RUU USB。
有关快速启动的详细信息，请参阅随附的照片。
提前致谢。
Click to expand...
Click to collapse
You use what method to let it enter FASTBOOT