Related
I've tried the "brick fixes" on this forum, but without luck so far... I can get into download mode, and I've tried flashing with odin from this post which says "passed" to me. After this is reboots into a black screen after the "galaxy S" screen, and nothing can be done except making the capasitive buttons light up...
All help is appreciated!!
FYI I don't have a SD card installed during odin...
Solutions in #6 and #7...
Thanks a ton
Novek said:
I've tried the "brick fixes" on this forum, but without luck so far... I can get into download mode, and I've tried flashing with odin from this post which says "passed" to me. After this is reboots into a black screen after the "galaxy S" screen, and nothing can be done except making the capasitive buttons light up...
All help is appreciated!!
FYI I don't have a SD card installed during odin...
Click to expand...
Click to collapse
Sounds like a boot loop, but I can't figure out why you would get one with the stock odin flash. Try doing a factory reset? it shouldn't be needed, but who knows?
how? tried the "hard reset" whitout luck
Novek said:
how? tried the "hard reset" whitout luck
Click to expand...
Click to collapse
In recovery.. there should be a factory reset option. I thought odin did that though.
when it is resetting I can read "mbr checksum error" or similar in yellow text before it's wiping data etc...
Try this ...turn you phone off but keep it plugged into you cpu usb cord and open oidin, next put your phone in download mode and put the needed files in oden and click start I had a hard time getting odin to work right for some reason this may not help but it worked for me. Good luck I don't think you bricked I think you can come out of this.
I assume that you used the partition in ROM Manager? If so I had the same problem as you. The phone would boot up to a black screen with only the buttons working. What I did was flash Eugenes 2.2 Froyo Rom, I surprised that it booted up and worked. After that I flashed back to stock rom and it work as it did before!
AustinKnight45 said:
Try this ...turn you phone off but keep it plugged into you cpu usb cord and open oidin, next put your phone in download mode and put the needed files in oden and click start I had a hard time getting odin to work right for some reason this may not help but it worked for me. Good luck I don't think you bricked I think you can come out of this.
Click to expand...
Click to collapse
Thanks for the help, but my problem occurs after odin... when it's rebooting and it says "passed!" i just end up with a black screen with only the capasitive buttons lighting up when pressed...
ElahC said:
I assume that you used the partition in ROM Manager? If so I had the same problem as you. The phone would boot up to a black screen with only the buttons working. What I did was flash Eugenes 2.2 Froyo Rom, I surprised that it booted up and worked. After that I flashed back to stock rom and it work as it did before!
Click to expand...
Click to collapse
that's my problem!! found it, downloading now... will report back for future accidents...
Froyo worked!! Thanks a ton! Now I just have to downgrade
sry... dubbel
I HAVE THE SAME PROBLEM. How did you get odin to detect your phone? I put it into download mode but no detection plzzz help
farrisizdaman said:
I HAVE THE SAME PROBLEM. How did you get odin to detect your phone? I put it into download mode but no detection plzzz help
Click to expand...
Click to collapse
I turned the phone off while the usb was connected when the phone if off open odin ounce its open boot up the phone and boot it into download mode from there odin will connect and you can put the files you need into it and click start. This worked well for me when I needed to revert back to factory vibrant after flashing the "Real lag FIX" kernel that made my ear piece not work and some of my buttons not work but boy was my phone snappy and my benchmarks were awesome but what good does that do when your girl calls you and you cant hear her and all she can hear is you saying hellllllllooooooo .
I"ve been trying to flash with odin now for about 2 hours. It gets stuck on DO NOT DISCONNECT. And never finishes.
farrisizdaman said:
I"ve been trying to flash with odin now for about 2 hours. It gets stuck on DO NOT DISCONNECT. And never finishes.
Click to expand...
Click to collapse
Ya it was like that for me until I did what I said in my last post, you do have the samsung drivers installed ?
Edit: And you are using this method or this thread HERE
farrisizdaman said:
I"ve been trying to flash with odin now for about 2 hours. It gets stuck on DO NOT DISCONNECT. And never finishes.
Click to expand...
Click to collapse
You have managed to get into download mode right? My device is up and running stock now, but gonna try some other ROM now =)
Glad to hear your phone is back up and running .
i know this is an old thread, but i figure this can help someone later... brick is a common search term, and i figure this will come up in a search and this will save time for others...
here's what happened to me. i was flashing back to stock and was in download mode. the blue bar was moving etc and murphy and his dumb law decided to kill my my usb port... i thought the phone was DEAD! nothing i did woke the phone up. no battery indicator, buttons didn't do anything... it was all black. holding up/down and power didnt turn the phone on and into recovery or download mode... the phone was DEAD...
then after scouring the forum forever, i finally got the phone into download mode...
NOTE: i don't recall if the usb wire was plugged into the computer or not... i think it was though...
NOTE2: samsung drivers should have been installed already...
- remove the battery
- hold vol up and vol down buttons
- reinsert battery
i thought WOO HOO!! I GOT INTO DOWNLOAD MODE!!!
the next issue i had was getting odin to recognize the phone... it didn't detect what com port i had. but after a lot of reading, i finally got it to work...
- open odin first
- then get into download mode using the steps above...
after odin recognized the port the phone was plugged into, i flashed back to stock rom using the instructions given on this site... and my dead phone works again...
i was able to fix a dead phone!! this phone could be un-brickable!!
i hope this helps...
farrisizdaman said:
I HAVE THE SAME PROBLEM. How did you get odin to detect your phone? I put it into download mode but no detection plzzz help
Click to expand...
Click to collapse
Open odin first, then plug in your phone.
1st of all i want to apologize for my bad english .
Few hours ago i had installed this rom, it was just fine, until i applied the app2sd option from SupSetupV16 application. After that my phone turned off with no reason and from then it restarts again and again. I've tried with an sdcard with ext3 & fat32 partition (cuz the app2sd option in this rom requires it, but i didn't saw it earlier, and my phone has no s-off) and the phone loaded the start animation of the rom, than turned off and all over again. The battery level was almost 50% just before the 1st restart, and now the phone is in the charger. The phone does not receive any command from the hardware buttons, just cant enter the recovery mode .. i feel rly fckd up. No volume up + power, volume down, back + power .. nothing. I'll charge it all night and try again in the morning. Somehow im smelling the service ...
i think you got loop because the phone is reading wrong data.
ok... do you have ClockworkMod backup your stuff already? you can unplug your phone from the usb, if it have been boot loop from just now. poor phone. you can disconnect it from the battery. now its totally off. hold Vol - and power on your device. then on the menu, go to recover... the red [!] screen... From what i've know, i can only go to recovery using these combination from the phone is in OFF state. not while its loop booting, and it is somewhat safe to remove your battery when the phone is not writing something to the internal memory.
if you have ClockworkMod, you can run the update.zip (the fake Flash) or if you have hack4Legend (cant remember if this the name on the pc download as i dont use this anymore) plug in your usb to the pc and run Recovery.bat if your windows.
then your on ClockworkMod. from here onward i guess you know what to do. go flash a new rom or do a wipe the data and stuff to see of the loop stops.
hope this worked for you as this is what i did... for a few times already.
If this dont work for you. then you should try the search button for boot loop.
Oh, man .. u're awesome. On turned off phone .. volume - and than power is working fine and the fastboot menu appears. You're awesome, again! Thanks alot!
I think it's very hard to actually brick a HTC Legend... I've had this problem too and some other black screen problems. All could be solved!
Lol, I think as android are hard to kill. Really... not just our legend. But rest too.... I personally poisoned my friends to get android phones so that I get to play with them. Showing them how much these phone can do... and if you root them youll get more cool stuff! lol..
But, anyway. I'm glad it workd for you.
Sent from my Legend using XDA App
However with S-ON legend to have app2sd with superginger you have to apply before the overlay, reboot and then app2sd.
Sent from my Legend using XDA App
my tmobile vibrant went down few hours ago ,i was rebooting clock..recov an it reboot into the open galaxy s logo an wont do anything . it wont boot back into recovery an it doesnt even show the battery charging .thats the only other screen i can get .....what have i done an plz tell me there an answer!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
Try plugging one end of the usb cable while holding down the volume buttons now plug in the other end of the usb cable while still holding the buttons. This should get you to download mode and subsequently you can odin back to stock.
Sent from my JPJPM V2 powered SGH-T959 using XDA App
monster2321 said:
my tmobile vibrant went down few hours ago ,i was rebooting clock..recov an it reboot into the open galaxy s logo an wont do anything . it wont boot back into recovery an it doesnt even show the battery charging .thats the only other screen i can get .....what have i done an plz tell me there an answer!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
Click to expand...
Click to collapse
No it's not bricked use the toolbox and you can start over.
http://forum.xda-developers.com/showthread.php?t=954509
Just bootlooped. You may need to odin back to stock and start over don't know not enough info. Check the toolbox, but more importantly, read the noob guide it has all the ways to solve there
tx man i just now got in download mode ....if ur online i would relly appreciate if u would throw me few tips ,,,,i never used odin before
can u unplug usb while in download mode {vibrant}
can u disconnect an reconnect usb while in DL mode without losing DL mode ????? it took me forever to get in DL mode..an comp. says device unreckonized ,,the drivers are installed ,,,do i need rconnect???????????????????????
yes just don't pull the battery
Salut à tous,
Yesterday, i got a problem with my LG. I wanted to change the Rom and after i finished the procedure, i got and LG Logo Loop
Here a little video a made of the Loop : http://www.youtube.com/watch?v=1ZDgzhDNBb0&feature=youtu.be
Normaly, i can change the Rom again by Hard Reseting, but when i press the 3 buttons, nothing happens.
When i connect the phone to the PC, i don't even got the sound that Win8 does when a phone is pluged in, that means that the phone isn't recongnized by the PC, and i allready installed all the Drivers.
I can't enter Emergency mode, when i press the buttons, nothing happens too.
My phone wasn't rooted so i don't have CWM.
I tried LG Support Tool, KDZ Software update, but as i said, the phone isn't recongnized, so i can't do anything.
Some people on forums adviced Medusa Box, but when i launch the app, i got as a message : Card init failed ..
So this is it.
I hope someone can help me. The phone isn't mine, so i'm little afraid of this loop .. Some people on forums said that this is a Hard Break, others said that this is Soft break, other also said that this is a Dalvik Cache Loop ..
Anyway,
Thanx in advance
Makozak said:
Salut à tous,
Yesterday, i got a problem with my LG. I wanted to change the Rom and after i finished the procedure, i got and LG Logo Loop
Here a little video a made of the Loop : http://www.youtube.com/watch?v=1ZDgzhDNBb0&feature=youtu.be
Normaly, i can change the Rom again by Hard Reseting, but when i press the 3 buttons, nothing happens.
When i connect the phone to the PC, i don't even got the sound that Win8 does when a phone is pluged in, that means that the phone isn't recongnized by the PC, and i allready installed all the Drivers.
I can't enter Emergency mode, when i press the buttons, nothing happens too.
My phone wasn't rooted so i don't have CWM.
I tried LG Support Tool, KDZ Software update, but as i said, the phone isn't recongnized, so i can't do anything.
Some people on forums adviced Medusa Box, but when i launch the app, i got as a message : Card init failed ..
So this is it.
I hope someone can help me. The phone isn't mine, so i'm little afraid of this loop .. Some people on forums said that this is a Hard Break, others said that this is Soft break, other also said that this is a Dalvik Cache Loop ..
Anyway,
Thanx in advance
Click to expand...
Click to collapse
mAke sure you have install all LG Software on your computer, like usb driver the important one
then download stock rom for your device
and flash it through KDZ Software update,
Try instaling drivers on some win7 pc/laptop, then try to revive the phone via kdz, because win8 sometimes has problems with drivers etc,
Btw which procedure were you using to change the rom?
Makozak said:
Salut à tous,
Yesterday, i got a problem with my LG. I wanted to change the Rom and after i finished the procedure, i got and LG Logo Loop
Here a little video a made of the Loop : http://www.youtube.com/watch?v=1ZDgzhDNBb0&feature=youtu.be
Normaly, i can change the Rom again by Hard Reseting, but when i press the 3 buttons, nothing happens.
When i connect the phone to the PC, i don't even got the sound that Win8 does when a phone is pluged in, that means that the phone isn't recongnized by the PC, and i allready installed all the Drivers.
I can't enter Emergency mode, when i press the buttons, nothing happens too.
My phone wasn't rooted so i don't have CWM.
I tried LG Support Tool, KDZ Software update, but as i said, the phone isn't recongnized, so i can't do anything.
Some people on forums adviced Medusa Box, but when i launch the app, i got as a message : Card init failed ..
So this is it.
I hope someone can help me. The phone isn't mine, so i'm little afraid of this loop .. Some people on forums said that this is a Hard Break, others said that this is Soft break, other also said that this is a Dalvik Cache Loop ..
Anyway,
Thanx in advance
Click to expand...
Click to collapse
Try to remove battery and connect the phone to the pc, hold volume + and - (between + and -, the middle) and the power button, this will works to get emergency mode, got same problem when tried to flash, still have the problem as you, logo loop with this stupid sound
Thank you everybody for your awnsers !
mugen_dz said:
Try to remove battery and connect the phone to the pc, hold volume + and - (between + and -, the middle) and the power button, this will works to get emergency mode, got same problem when tried to flash, still have the problem as you, logo loop with this stupid sound
Click to expand...
Click to collapse
Yes, it work, i'm finaly in the Emergency Mode ! My mistake was to press Power and Volume - or +, not the middle ..
Now that i'm in the Emergency mode and i don't want to get in any trouble again, which rom do you advise me to instal ? and with what method ?
Thanx again
Makozak said:
Thank you everybody for your awnsers !
Yes, it work, i'm finaly in the Emergency Mode ! My mistake was to press Power and Volume - or +, not the middle ..
Now that i'm in the Emergency mode and i don't want to get in any trouble again, which rom do you advise me to instal ? and with what method ?
Thanx again
Click to expand...
Click to collapse
Download the stock rom (original) for your phone, must know which version there is a lot of version ( V10C, V10G, V10E ...)
Use Kdz updater, if the App crash check compatibility and choose windows XP, in KDZ updater use the mode 3GQCT and phone mode DIAG, browse for the stock rom in the KDZ FILE and click Launch software update.
When i flashed the stock rom i got the loop, so i tried to hard reset it and it worked for me (power + menu + volume down or up i forgot)
Try to hard reset before flash if it doesn't work, flash it.
Okay Thanx again mate, i'll try it now and tell you
Worked ?
Sent from my HTC Desire S using xda app-developers app
Sorry mate, i was busy all the week, i only had free time today.
Anyway, yes it worked
Thanx a lot !!
You're a life saver
Excellent !
Sent from my HTC Desire S using xda app-developers app
So I have a Samsung Galaxy Gran Prime Duos G530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
something similar happend to me..
rxxern said:
So I have a Samsung Gran Prime Duos GM-530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
same as yours but mine has logo displayed and i cant turn on or put in recovery mode can you please message me if you find a way to fix it?
HyperVenoms said:
same as yours but mine has logo displayed and i cant turn on or put in recovery mode can you please message me if you find a way to fix it?
Click to expand...
Click to collapse
Yeah, sure!
This might be stupid, but did you try use Odin? Since your logo appears, I think you're in a better condicion then me, lol.
No but i found a solution
rxxern said:
Yeah, sure!
This might be stupid, but did you try use Odin? Since your logo appears, I think you're in a better condicion then me, lol.
Click to expand...
Click to collapse
ok so i couldnt put it into recovery mode or anything it was stuck so i took out the battery then held volume down power and home then pressed down to restart device and it came on successfully i hope this also works for you
rxxern said:
So I have a Samsung Gran Prime Duos GM-530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
Try to download its stockrom boot it into download mode not recovery since recovery doesnt work any more i think its volume - if not + ,power button and Home button then dow load ODIN and flash the it so as to guarentee it to boot up again.
link for the devices stock rom
#https://docs.google.com/uc?id=0B7pEcClQW-2JenF1cW9jb05OVlk&export=download
thanks enjoy!!
No that lucky
HyperVenoms said:
ok so i couldnt put it into recovery mode or anything it was stuck so i took out the battery then held volume down power and home then pressed down to restart device and it came on successfully i hope this also works for you
Click to expand...
Click to collapse
So lucky! I can't do that to mine, when I put the battery out and try to do this, my phone has no response. ):
out of options
marwachacha said:
Try to download its stockrom boot it into download mode not recovery since recovery doesnt work any more i think its volume - if not + ,power button and Home button then dow load ODIN and flash the it so as to guarentee it to boot up again.
link for the devices stock rom
thanks enjoy!!
Click to expand...
Click to collapse
Thanks for the tip, but I really think I hard brick my phone, he just vibrate when the battery is on, when I try to turn him on just with the charger I get no response, my computer cannot ever reconize him. An since it's a national model there isn't much support for it on the internet (now I do regret getting him). I opened him to try force the reconization, but I don't find the force preloader mode test point and there is no way I can get a JTAG on Brazil.
TWRP Recovery Mode f*** me really hard this time.
Now if someone could help me finding the colo/kolo/whatever point on my phone I would really appreciated.
rxxern said:
Thanks for the tip, but I really think I hard brick my phone, he just vibrate when the battery is on, when I try to turn him on just with the charger I get no response, my computer cannot ever reconize him. An since it's a national model there isn't much support for it on the internet (now I do regret getting him). I opened him to try force the reconization, but I don't find the force preloader mode test point and there is no way I can get a JTAG on Brazil.
TWRP Recovery Mode f*** me really hard this time.
Now if someone could help me finding the colo/kolo/whatever point on my phone I would really appreciated.
Click to expand...
Click to collapse
Am not much sure if ti is hard bricked since you sayed that it vibrates lets look how much characteristics of a bricked device of which it posseses so as to conmfirm that it is hard bricked.
Soft Brick - Struck inBoot loop
2. Super Brick - Stuck atflashing Factoryfs.IMG in ODIN . Also called as EMMC Bug
3. Hard Brick -Dead / Costly Paper weights
4. Dead Brick - No chargingbattery sign also - Mostly = Hard Brick; But there is a window of possibilityby a USB JIG for SamsungPhones.
5. OTA Brick - Encountereddue to updating OTA on a rooted Stock ROM
6. CM12 Brick - when CM12encountered a /data write error. Worst is ODIN Flashing Fails
7. Pixel Salad: This is a problemof the graphics unit or the screen which fails to display correctly the imageand put instead random colored pixels on some areas of the screen or the wholescreen. It’s hard to even let the other members know what you are facing sinceyour screenshots would be just clean as it would have been. This also requiresa need for hardware checking if reflashing ROM doesn't work.
Soft brick means a temporary problem, which could be fixed. Soft brick usuallyoccurs after installing custom rom(s) or incorrect installation procedure whichinstallation/manipulation of files like permission settings, erasing systemfiles that is not compatible with each phone.
SOFT BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
Phone struck on OEM logo.
Phone struck on a ROM logo "bootanimation"
The phone does not simply power up
or any other you can add up
HARD BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
· No signs that can turn on directly
· The Charging won't work.
· Phone not detected when connected to a PC
· The LED's do not light up immediately
· No Sound / Vibrate
· Your phone completely off (Paper Weight)
Simply put it cannot be repaired using SEUS, FLASHTOOL, ODIN or even PC COMPANION.
marwachacha said:
Am not much sure if ti is hard bricked since you sayed that it vibrates lets look how much characteristics of a bricked device of which it posseses so as to conmfirm that it is hard bricked.
Soft Brick - Struck inBoot loop
2. Super Brick - Stuck atflashing Factoryfs.IMG in ODIN . Also called as EMMC Bug
3. Hard Brick -Dead / Costly Paper weights
4. Dead Brick - No chargingbattery sign also - Mostly = Hard Brick; But there is a window of possibilityby a USB JIG for SamsungPhones.
5. OTA Brick - Encountereddue to updating OTA on a rooted Stock ROM
6. CM12 Brick - when CM12encountered a /data write error. Worst is ODIN Flashing Fails
7. Pixel Salad: This is a problemof the graphics unit or the screen which fails to display correctly the imageand put instead random colored pixels on some areas of the screen or the wholescreen. It’s hard to even let the other members know what you are facing sinceyour screenshots would be just clean as it would have been. This also requiresa need for hardware checking if reflashing ROM doesn't work.
Soft brick means a temporary problem, which could be fixed. Soft brick usuallyoccurs after installing custom rom(s) or incorrect installation procedure whichinstallation/manipulation of files like permission settings, erasing systemfiles that is not compatible with each phone.
SOFT BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
Phone struck on OEM logo.
Phone struck on a ROM logo "bootanimation"
The phone does not simply power up
or any other you can add up
HARD BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
· No signs that can turn on directly
· The Charging won't work.
· Phone not detected when connected to a PC
· The LED's do not light up immediately
· No Sound / Vibrate
· Your phone completely off (Paper Weight)
Simply put it cannot be repaired using SEUS, FLASHTOOL, ODIN or even PC COMPANION.
Click to expand...
Click to collapse
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
hmmm
rxxern said:
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
Click to expand...
Click to collapse
this may sound dumb but maybe your screen is broke i highly doubt it because of what happened but if you can feel the vibrations but not see the screen then maybe its the screen. There will probably be a way to fix it but im unsure. Its funny how you call your phone him
HyperVenoms said:
this may sound dumb but maybe your screen is broke i highly doubt it because of what happened but if you can feel the vibrations but not see the screen then maybe its the screen. There will probably be a way to fix it but im unsure. Its funny how you call your phone him
Click to expand...
Click to collapse
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
rxxern said:
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
Click to expand...
Click to collapse
rxxern said:
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
Click to expand...
Click to collapse
haha ok, i habe no idea what to do wiith your phone try searching other threads maybe ???
rxxern said:
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
Click to expand...
Click to collapse
also in advance try to change the usb cable which you are using to connect (him) with your computer as well as try different Pc's may Be yours might have some usb port drivers corrupted also try to install the ADB interface drivers in your pc so as you can enhance your Pc detect the devices even if they are powered off gues it will work still i have hope with your (him) buddy!!!
Nothing better than xda.
I am having the same problem with my G530BT. Managed to solve ?
rxxern said:
So I have a Samsung Galaxy Gran Prime Duos G530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
I am having the same problem with my G530BT. Managed to solve ?
Raphaelfla said:
I am having the same problem with my G530BT. Managed to solve ?
Click to expand...
Click to collapse
Ow, one year latter I don't think this will help you anymore, but just in case someone has the same question: I didn't solve the problem, I took it to the Samsung assistence and discover that the motherboard was damaged, they would have to replace it.