Does anybody had been dealing with problem that GT-I5800 just doesn't turn on?
It somehow turned off during the night and now i just can't turn it on.
All it's showing is start screen "GT-I5800" and SAMSUNG in the bottom.
What should i do?
Please help somebody.
I've had a similar problem. Did you flash your phone with JPA or similar?
I was able to flash mine again with JPB, to be more precise I used the pre-rooted custom rom with can be found in the development section.
Start Odin, then select the options you need (one package, tar file etc). Turn on the phone in download mode, and flash it before Odin says 'disconnected' or something.
if you did not flash your phone, I would recommend against trying this.
And mine... thats don't power on... hahahaha
Tried to remove battery and do keys combinations... But phone don't power on...
Maybe i need to sendo to local samsung =/
Related
when i flash a rom with odin..a min later.i saw the odin ProgressBar still not move ,so i pulled out the usb and the battery.then put the battery in the phone again,and wanted to go into the download mode to flash the rom again..but when i wanted to power on the phone.,my phone can't power on any more..try many times..it's still dead ..do anyone know what's the problem with my phone?
Take the battery out and press the download mode (three buttons) and insert the battery. This worked for me and I got the download mode back this way. Used a flat table to push the bettery in.
Good luck.
Do you get anything on screen at all or is it just black?
Try leaving the battery out of the phone for over an hour then putting it back in and see if you can go into download mode, this worked for me after I semi-bricked my phone before Christmas. Otherwise you may be able to get it into download mode with a USB jig if you are lucky
http://forum.xda-developers.com/showthread.php?t=819551
ka2uki said:
when i flash a rom with odin..a min later.i saw the odin ProgressBar still not move ,so i pulled out the usb and the battery.then put the battery in the phone again,and wanted to go into the download mode to flash the rom again..but when i wanted to power on the phone.,my phone can't power on any more..try many times..it's still dead ..do anyone know what's the problem with my phone?
Click to expand...
Click to collapse
which rom were you flashing? did it contain sbl.bin and boot.bin? if they were contained, the luck is lower than the others. if it didnt contain them, it is like 99% you will rescue your phone by download mode.
my phone wont boot.
I dont think it bricked it can charge
and when i try to go into revovery all i see is a phone a caution sign anf a computer. what did i do? and how do i fix it?
Had you done anything with your phone before this happened? Where you trying to flash something? Any other info you could give would be helpful.
yes i tried flashing using odin
the screen on my pgone turned white..
amd well i tried using odin agin and the computer dosnt reconize the device
You're going to have to use odin to go back to stock. Can you get back to download mode? Take out the battery,put back in, and push the #1 button on the keyboard and the power button at the same time.
yes thanks alot you really helped me out
your a life saver thanks again
Hi All,
I need your help. I downloaded the latest update for the S4 this morning after i clicked yes for the phone to reboot. It didn't turn back on. Everytime I try to turn it on, it vibrates but it doesn't show the logo. I also tried entering the recovery mode or download mode but there's nothing on the screen. I also tried removing the battery for several minutes and then tried the things i said above.
Is there any other way I can boot this or reformat my phone? Please help.
Thank you very much in advance
Same here.. I had the same problem.. I did try reset it and go to recovery mode, once on recovery mode, i can choose any option because it automatically goes back to install the update. And then after installation it stuck at the boot screen again and can't turn on. I had my phone rooted before but I already flash my phone back to stock. During the period where i root my phone i never install any custom ROM and whatsoever..
re: odin flash - JIG
katsumotoken said:
Same here.. I had the same problem.. I did try reset it and go to recovery mode, once on recovery mode, i can choose any option because it automatically goes back to install the update. And then after installation it stuck at the boot screen again and can't turn on. I had my phone rooted before but I already flash my phone back to stock. During the period where i root my phone i never install any custom ROM and whatsoever..
Click to expand...
Click to collapse
What I would do is go to ebay or online stores and buy a USB JIG it works perfect on Samsung Galaxy S4
and other android phones. The price is right too, anywhere from $1.00 to $5.00 including shipping.
Here is a link worth looking at:
https://www.google.com/search?q=andr...icial&tbm=shop
JIGS are made for issues just like the ones you and @lasallegreen are experiencing.
All you need to do with the jig is first remove the battery from your phone for
20 seconds and replace it, then plug the USB jig into the usb port of the phone.
Wait a couple seconds or so and you will see the download mode screen.
Unplug the usb jig and load/open odin and after putting the stock rom in the
pda slot in odin connect usb cable from phone to computer.
Make sure the [COM:xx] lights up in Odin and click START.
Once odin successfully flashes the official stock rom the
phone will again be in perfect condition ready to use.
Your phone is NOT hard bricked, but most likely it is soft bricked meaning that it can be fixed to
come back to life after Odin flashing the official Samsung S4 stock firmware/rom which you can
find and download from http://SamMobile.com by searching by the model number of your phone.
Good luck!
Will try this method.. Thank you very much for your kind reply.. Will let you know of the outcome..
katsumotoken said:
Same here.. I had the same problem.. I did try reset it and go to recovery mode, once on recovery mode, i can choose any option because it automatically goes back to install the update. And then after installation it stuck at the boot screen again and can't turn on. I had my phone rooted before but I already flash my phone back to stock. During the period where i root my phone i never install any custom ROM and whatsoever..
Click to expand...
Click to collapse
i was able to flash the stock rom using odin to see if that is the problem. I was successful in flashing but there's still nothing on my screen.
update: when i leave it for a few hours or so, there are times that the screen turns on and then it boots normally but if you reboot it's back to its frozen state. I hope someone can help me with this.
I'm not sure what type of "bricked" this would be but, I tried to flash my Canadian Fido S4 I337m with a MF3 modem. I did this through Odin Mobile Pro. At first it was all good, it started to restart with a blue android figure. It started to take a really long time and nothing was happening so I decided to turn the phone off. Now the phone won't turn back on and it won't connect to the PC. I have my backup saved on my sd card but I can't get the phone to load at all.
It's currently stuck the battery charging power up screen. I can't post a picture since I haven't posted 10 times apparently... So it's the grey battery icon, the circle in the middle isn't moving whatsoever.
Did a battery pull, tried starting it in safe mode, and tried to restart it in the download mode. All of which have failed.
Any advice would be helpful.
Thanks
*Update*
The blue android figure is back. Does anyone have any information on how long this little android guy is supposed to be around for?
benjiyap said:
I'm not sure what type of "bricked" this would be but, I tried to flash my Canadian Fido S4 I337m with a MF3 modem. I did this through Odin Mobile Pro. At first it was all good, it started to restart with a blue android figure. It started to take a really long time and nothing was happening so I decided to turn the phone off. Now the phone won't turn back on and it won't connect to the PC. I have my backup saved on my sd card but I can't get the phone to load at all.
It's currently stuck the battery charging power up screen. I can't post a picture since I haven't posted 10 times apparently... So it's the grey battery icon, the circle in the middle isn't moving whatsoever.
Did a battery pull, tried starting it in safe mode, and tried to restart it in the download mode. All of which have failed.
Any advice would be helpful.
Thanks
*Update*
The blue android figure is back. Does anyone have any information on how long this little android guy is supposed to be around for?
Click to expand...
Click to collapse
Download Odin 3.07 for the PC.... you flashed the wrong mode... I believe you flashed a US modem not a Canadian on... suggest NC1 can be found in the forum...
With the phone unplugged, press volume down +home+power if you get a warning, release buttons and press voulme up to go to download mode...
Start Odin.... important... take off auto reboot....
there are instructions on how to properly flash the modem... likely in the same thread you found the file.....
Flash only the modem.bin file inside the folder... do not flash the nonhalos file....
Most instructions sau flash once... reboot to download mode.. flash again....
Basically let me know if you can get to download mode... I tried to google blue android on screen but didn't find anything yet... first I have heard of blue... I have seen green dead ones though....
Gage_Hero said:
Download Odin 3.07 for the PC.... you flashed the wrong mode... I believe you flashed a US modem not a Canadian on... suggest NC1 can be found in the forum...
With the phone unplugged, press volume down +home+power if you get a warning, release buttons and press voulme up to go to download mode...
Start Odin.... important... take off auto reboot....
there are instructions on how to properly flash the modem... likely in the same thread you found the file.....
Flash only the modem.bin file inside the folder... do not flash the nonhalos file....
Most instructions sau flash once... reboot to download mode.. flash again....
Basically let me know if you can get to download mode... I tried to google blue android on screen but didn't find anything yet... first I have heard of blue... I have seen green dead ones though....
Click to expand...
Click to collapse
No, I can't seem to get into download mode. It just keeps heading on to the the blue android. I purchased a dongle jig to get it to download mode on ebay hoping that would work.
Method 1 Odin Mobile
Extract TAR and place modem.bin on Internal or External SD Card
Open mobile Odin (free version works but pro is awesome)
Select modem 2 and find extracted bin file
Press flash firmware button
System will boot to download
Hold power button for 10 seconds if download mode in green comes up.( should be blue)
Odin will install modem files
Done
This is what I was following. It said if it comes up as a blue android it's good.
benjiyap said:
No, I can't seem to get into download mode. It just keeps heading on to the the blue android. I purchased a dongle jig to get it to download mode on ebay hoping that would work.
Method 1 Odin Mobile
Extract TAR and place modem.bin on Internal or External SD Card
Open mobile Odin (free version works but pro is awesome)
Select modem 2 and find extracted bin file
Press flash firmware button
System will boot to download
Hold power button for 10 seconds if download mode in green comes up.( should be blue)
Odin will install modem files
Done
This is what I was following. It said if it comes up as a blue android it's good.
Click to expand...
Click to collapse
If you put the modem file on an external sd card.... maybe you could pull the card, put it in a usb reader and put the proper modem.bin file on the card and put it back in the phone and power it up.... see what happens. I am guessing it couldn't finish the process because you have the wrong modem file...... Okay so now I realize you are stuck on the mobile odin logo... (blue guy) search google for how to get out of that or go to the mobile odin thread and ask chainfire... it is his app....
I've got the problem fixed. I re-flashed my whole firmware and managed to get the phone into download mode using a USB Jig. This is for reference if anyone encounters the same problem in the near future.
Thanks for the help and advice though.
I was going along ok until I made the fatal error of transferring the Magisk patched file to PC via MTP instead of taking the time to re-learn adb, which must have corrupted it. Thus predictably Odin hung and I am in trouble.
Where I am stuck is being unable to turn the phone off to come back in download mode to start over with stock firmware. I have been unable to find any secret button presses, and the battery doesn't seem to want to die leaving me with an $800 paperweight.
I did search around for this first and didn't find any real answers. Has anyone found an effective solution to this problem? Thanks.
fastzombies said:
I was going along ok until I made the fatal error of transferring the Magisk patched file to PC via MTP instead of taking the time to re-learn adb, which must have corrupted it. Thus predictably Odin hung and I am in trouble.
Where I am stuck is being unable to turn the phone off to come back in download mode to start over with stock firmware. I have been unable to find any secret button presses, and the battery doesn't seem to want to die leaving me with an $800 paperweight.
I did search around for this first and didn't find any real answers. Has anyone found an effective solution to this problem? Thanks.
Click to expand...
Click to collapse
If Odin recognizes you device, you can flash firmware in emergency recovery.
Cindysmith0994 said:
If Odin recognizes you device, you can flash firmware in emergency recovery.
Click to expand...
Click to collapse
Thank you, but the PC won't recognize the device. What does happen is the emergency recorevy screen tries to come up. I tried starting in download mode with bixby+vol down then USB. I did get the battery low enough where I don't get the teal screen of death anymore, perhaps it is too low for USB to work? What I was hoping for was the charging animation but no luck. Surely this is just a software problem and there is a way out.
fastzombies said:
Thank you, but the PC won't recognize the device. What does happen is the emergency recorevy screen tries to come up. I tried starting in download mode with bixby+vol down then USB. I did get the battery low enough where I don't get the teal screen of death anymore, perhaps it is too low for USB to work? What I was hoping for was the charging animation but no luck. Surely this is just a software problem and there is a way out.
Click to expand...
Click to collapse
Did you try getting into recovery and perform a data factory reset and then see what happens?
Just load the stock firmware BL, Ap, cp and home csc into Odin if you see emergency teal screen. The emergency screen will start loading
Black screen ....Perhaps your battery is dead?
Thank you all for the replies. I had let the battery get low in a misguided attempt (based on advice elsewhere) to get it to shut off. I had to let it charge a while for it to wake up enough for PC to see it. Then I was able to flash in Emergency Recovery mode.
Thank you for the help.
fastzombies said:
Thank you all for the replies. I had let the battery get low in a misguided attempt (based on advice elsewhere) to get it to shut off. I had to let it charge a while for it to wake up enough for PC to see it. Then I was able to flash in Emergency Recovery mode.
Thank you for the help.
Click to expand...
Click to collapse
Glad you got your device up and running ?
Maybe someone can help me. I seemed to have borked my phone. I kept getting "Google is Stopping" with no way to fix it, so I tried reflashing my firmware in odin. After I loaded all the files and hit start, I realized I didn't untick auto reboot, so I tried aborting the installation and ended up with screen (I've had it before and got out of it by still flashing in Odin, but now, if I try to reflash firmware while in this screen, it's stuck on SYSTEM in odin.
Any help appreciated!
Try this
That is where I got stuck. Are you trying to flash stock or patched firmware? I had to start over with stock as I copied the patched via MTP instead of adb and it got corrupted.
I think what I did was unplug and reset Odin. Wait for screen to turn off, then make sure it is at least 80% charged. Then Bixby + Vol Down + plug in and you will go back to this screen. Then I was able to flash stock. I had to go so far as to re-lock bootloader and flash stock again since my "OEM Unlocking" was not just greyed out but missing. Since then I've had no time to try again, but at least I have a working phone.
This is my anecdotal procedure, can't say if it is the right or best one.
Hi All,
I was trying to flash the latest firmware for my device (G9750ZCU2ASG4) and during the odin process, my computer restarted which failed the update halfway through. I rebooted the computer, tried again, and it was trying to establish a connection for a really long time, so I disconnected my phone from the USB port on my computer, and held Power and Volume Down to try and force reboot the phone. I was going to try and go back into download mode to restart the process. My phone mentioned something about needing to do an emergency recovery, but I continued to hold down the power and volume down keys and then everything went black on the phone.
I've tried multiple USB cords, all of the button commands known for the device, and have even tried to perform the emergency mode recovery on my device, but it seems like it's in some sort of locked state; What I mean is the phone is stuck on a black screen. I can't "boot" into recovery or into download mode. The phone doesn't even vibrate when I hold the power button or power and down to try and force reboot it. Odin doesn't recognize the phone when I plug it into the computer nor does the device manager on my windows computer.
Does anyone have any experience with this sort of issue or any idea of what else I can do to try and get into download mode to flash my firmware again? All help, suggestions, or comments regarding this are much appreciated.
Sounds like the battery is dead
Hi Dude, I am struggling with the same problem, read this post and it came to me, had to come back and give you the solution.
Press bixby+volume down, IMMEDIATELY after the screen goes off, hold volume up and down while connecting the USB cable super fast.
You have got like 10ms to do it
Otherwise it just goes back to the AVB FAIL screen
Ran into this issue, none of the above worked for me.
This is how I resolved:
1) Placed phone on wireless charging mat and let it boot to emergency recovery screen
2) Load TWRP into AP slot of Odin and leave the window open on your computer ready to flash
3) Connect phone to computer whilst it's on the mat and press start in Odin as soon as your device appears
It may fail a few times but if your quick you can install TWRP.
4) Now boot into recovery and let your phone charge to a reasonable level (above 20%)
5) Boot into Download mode and flash your desired rim via Odin