I have a 3 year old Trendnet router Wireless N I only paid $19 for it. I was wanting to upgrade to a newer router for more distance range. I am lucky to live where my nearest neighbor is over 600 feet away.
I was hoping to hear from those who have had success with newer routers and those who have had problems with specific routers.
I'm only 15 feet away from the router and I only have 2 bars up on the WIFI icon. I have had trouble with using my laptop on my front porch also.
If I may, I'd suggest something that's a dual-band unit, since the mT4G supports 5GHz wireless-N, in addition to the B and G 2.4GHz-based stuff. I've had good luck with WiFi calling on my Linksys E3000, and I use a harddrive on it as well (it has a USB port). The two newest laptops, and my phone, all use 5GHz N, while the other stuff (including the G2 and Charm in the house) use the 2.4GHz G stuff.
i wouldnt suggest using N at all unless you need that speed, unless you have that fast of a internet provider MY opinion is you dont need it. The signal that it uses (5Ghz) bounces off walls and objects very easy. To get better penetration go with G or like the person above said, dual band.
I picked up a Apple AirPort Extreme after reading through some post on distance of wireless routers. I downloaded a WiFi app and the old one set to b/g only has more signal strength than the 2.4 GHz or 5 GHz on the Extreme. I am still having problems with WiFi Calling, but have found if I turn the phone off then restart it will connect to WiFi Calling and stay as long as I am in range of the router.
I did notice that the 2.4 GHz channel was stronger than the 5 GHz on the Extreme in all distance checks.
5 ghz is best when you have loads of neighbors or lots of personal APs, and need clear channels.... I run a g AP in 2.4 an n in 2.4 both 40mhz wide, and an n backbone at 5.
I have a 310n and rt-n16 that give me full signal..... both on 40mhz wide with WiFi performance on, pulling 16-20Mbps
Sent from my HTC Glacier using XDA App
Related
I am a tad torn:
Things the A500 does well-
1. Build
2. USB host
3. Display (sans the extreme angles) holds up IMO to IPS displays for color and brightness.
4. Most of the apps are not shallow bloatware, compared to other devices.
5. Rooting is mega easy
6. UI and response of display
7. Battery life
8. Seems efficient in sleep mode
9. Great sound quality for a tablet
Still, the one major area for me is the wifi. Things the A500 does not do well:
1. Reception is the weakest of any of my devices except the sucktastic' Archos A5. My gTablet blows the A500 away for range and stability of connection.
2. No adhoc (why do OEMs keep screwing this up?) the only way to get it for now is risking hosing the device through modding. Most users would like it to work without that risk.
3. A brand new highly pushed device (most main retailers are going to carry it) Honeycomb tablet with no 5ghz support?!
4. The wifi seems to toggle with signal strength, since it will go from one to two bars and then disconnect and reconnect. I wonder if there is a kernel issue and screwed up power management?
It seems the other stuff on the A500 works so well, it makes the wifi stick out like a VERY sore thumb.
I have tested two routers with very good ratings for range and work well even with my weak N900 (another weak wifi radio device). My router is in my basement due to my office, but in an open and central area to upstairs. A PS3, 360, Wii, three laptops, gTablet, PSP, Droid 1, Incredible and iPod 4 all work fine and maintain connection upstairs. Upstairs, I have to be nearly above the router to get a good and stable signal with the A500.
added:
The A500 seems to need a mW level increase with the wifi radio.
I have a Netgear WNDR3700 and have very good signal .. router on 2nd fl and signal is good downstairs.. it's a more expenisve router but very good and you can load DD-WRT if you want, but the FW with it is very nice..
i don't get it.... i had a gtablet for 7 days and it's wifi sucked compared to my a500, which seems to be the opposite to what everyone else is saying.
granted, the gtab and iconia's wifi both suck compared to my archos 101's wifi, but i like the a500 so much better overall.
Wifi is GREAT here. I have a WRT610N.
Hmm. A few of us here so far aren't having problems. It's probably your unit.
In my case it's around the same power as the GTablet. I live in a 2k sq ft. apt and I get -1 bars at the farthest point from the router in my apt. The problem with increasing the transmit or receive power too much is that you get unnecessary drain on the battery...same thing with adding 5ghz support.
5ghz is also a pretty troublesome bandwidth. My phone is dual band and has trouble with SO many wifi n 5ghz networks. Even on mine as the only device using it currently, it works like night and day between 2 different firmware revisions, likely because of interference and overlaps with other people's wifi and how each fw. handled it.
People think wifi n 5 is better than 2.4 but in fact it's only better when there are very few people using it. Not only does it give you less range, but it's also more prone to interference than 2.4 or G. 2.4 N is a pretty strong balance and as long as you aren't forcing 300Mbps mode (channel bonding), I really don't understand why you're getting such a weak signal or disconnects. Wifi N is great for performance when it works how it's supposed to. It has a lower floor for noise and a wider spectrum but all in all, it's not worth the trouble (if you have any). 2.4 at least works in a more solid fashion, interference or not. I think this is why many suppliers just choose to stick with it vs. dual. Though I agree it's VERY nice to have the option. But necessary? Nah.
Try exchanging it. I don't think 'weak wifi' is general of the a500s.
No probs with wifi works all over the house no worries.
Personally my biggest gripe is the length of the power lead, shockingly short what would it have cost them to add 4 feet of wire to make it more usable. My vega has fantastic cable length...
________________________________________________________________________
ZTE Blade - Rooted OC 729mh - CM7 RC2 V/nice
Advent Vega - Rooted OC 1.4gh - Corvos5 rom gorgeous smoooth and qqquick
Iconia A500 - Rooted - HComb Sweet
i too have great wifi connection...my house is over 3,000 sqft and is made of concrete and brick. i use a cicso valet wireless n router and have at least two bars of signal when my tab is on one end of the house and router is on the other end. it has a better signal then my gtab, droidx, and the wifes new iphone 4. not sure why you are having issues as my tab has nevrr even lost connection once since the day i bought it. if you already have played with the settings on your router you might want to consider that you have a faulty wifi module in your tab.
Sent from my A500 using XDA Premium App
I have a linksys wrt610n in my basement. My wife gets very good wifi connection all through the house and even on the 2nd floor. On top of that she gets a good connection on the front porch and back patio outside.
Wifi is as good as my ipad and iphone with this device. It never drops and works all throughout the house and yard. Posting from from front porch right now. On wifi analyzer I am picking up networks several houses away.
So maybe a bum radio then?......
I have the Netgear WNR3500L router and, believe me, the A500 finds the signal everywhere in my 2500 sqft house. I actually had more trouble with my g tablet whenever it went to sleep. Wifi would disconnect and then reconnect constantly even if I set it to "Never Sleep" in the settings.
WiFi is great for me, too. I can go outside, across my yard with no apparent signal loss.
My first A500 must have had a wifi issue, since not having the problem with my second one. Strange.
I now have also moved my router to a more central location (out of basement) so all of my devices have a good signal. I was should have done this a long time ago. Apathy I tell ya!
Had the same problem with my Acer Netbook. Had to replace the card inside with one from eBay. I am not surprised this is an issue for some of us.
I wasn't too pleased with their customer service then and I don't expect this problem to be fixed with software.
Only problem for my A500 was in my bedroom where I get 1 bar on my PCs and notebooks, and even my Droid has some issues. So I set up a range extender and have no issues anywhere in the house now.
At work and out on the road I've had no problems with hotspots anywhere.
I got online and foudn a guide on how to tweak my Dlinik router for best performance.
I changed the security to WPA2 and st it to the best channel according to the WiFi Analyzer app on the Market.
I then made sure that only N or N/G was set and allowed for a wider band (40/20 mhz?)
Don't choose channel 1 as it can interfere or be interfered with other wireless radios being too close to that channel.
Can't remembered if I did anything else but I now can have the tablet up two floors and I maintain the signal.
Looks like its a keeper after all.
decent wifi signal
I'm on mynsecond a500 after returning one due to a bad hdmi connector. Wifi has been okay on both. Mostly two and three bars and only down two one bar when outside and farthest away from the router.
In fact right now I have two bars and am connected and posting from the a500 in a hotel. It has the same signal strength as my laptop.
My problem was not the signal as much as the stability of it. If three to four bars, the connection was stable and did not lose connection. One to two bars was very unstable and would cut out about every five minutes or so, when tested with a few routers.
The second A500 is stable at low bar signals.
Alright so I've read that the a500 has wireless N. However, I cant see my network. I have a dual band Netgear router which emits G on 2.4ghz frequency for older devices in my house, and it also emits N on 5ghz. My a500 can't even see that. Is the iconia limited to N only on 2.4? Anyone else have this problem? Its notntoo big of a deal but I'd like to use my N network if possible.
I beleive it is limited to N at 2.4. I have no problems connecting to my N network.
Ah, that's a shame. I dont want to put my N on 2.4 because then I can't have a separate network for G on 5 ghz. Oh well, not too big a deal.
Yea, I connect at 72Mbps upstairs, in a concrete house. 2.4GHz 20MHz channel only. No bonding for 300Mbps.
802.11g isn't supported on 5GHz. The similar speed on that spectrum is 802.11a.
I Have Atrix with netrino rom 2.2ee. but general question anyone getting 150Mbps link speed thru there router? best i can get is 72Mbps and coworker has Atrix2 he gets 64Mbps.
Are you paying for 150mbps?! I don't even want to image THAT bill :O
Well, here's a question. Is anything else connected to the router while you're performing these speed tests?
dp28688 said:
I Have Atrix with netrino rom 2.2ee. but general question anyone getting 150Mbps link speed thru there router? best i can get is 72Mbps and coworker has Atrix2 he gets 64Mbps.
Click to expand...
Click to collapse
How are you performing your test?I can't imagine a reliable test could even be performed on the atrix.
Even for my phone the results vary. The results on the speedtest.net app will be much different then visiting speedtest.net on the browser (obviously not default I use opera)
Anyways what type of service do you have?
dp28688 said:
I Have Atrix with netrino rom 2.2ee. but general question anyone getting 150Mbps link speed thru there router? best i can get is 72Mbps and coworker has Atrix2 he gets 64Mbps.
Click to expand...
Click to collapse
You talking about your actual internet speed dl, or file transfer speed within your network? I cannot get 150Mbps through my router with file transfers. I max out at 25Mbps with my internet speed, but that's all the bandwidth I get anyway.
The speed depends on what the hardware is capable of. The 802.11n standard supports up to 300Mbps in theory. In theory because hardware hasn't been made that is capable of transmitting at that speed. And he is no doubt talking about through a local network. If he is talking about internet bandwidth, I envy him lol.
Sent from my MB860 using XDA App
dp28688 said:
I Have Atrix with netrino rom 2.2ee. but general question anyone getting 150Mbps link speed thru there router? best i can get is 72Mbps and coworker has Atrix2 he gets 64Mbps.
Click to expand...
Click to collapse
I am assuming the OP is referring to the modulation rate his phone is connecting to the router with. I don't know a lot about the wireless adapter in the Atrix aside from it being able to do 802.11 a/b/g/n. However, I am pretty sure the N capability of the wireless adapter has the highest modulation rate of 72Mbps when running on 1 chain in a 20Mhz channel (to my knowledge the Atrix only has one Wi-Fi antenna in it). So assuming you have a great Wi-Fi signal to your wireless router and low noise, 72Mbps is the highest modulation rate your phone will achieve. In order to achieve 150Mbps, the wireless access point you connect would have to be running in 40Mhz channels before the phone could benefit from the router's 150Mbps capability.
Since the Atrix is 802.11a capable, I bought a dual band router and reap the benefits of being the only one in my neighborhood using a 5Ghz capable router. While I only connect at best with 54Mbps, I can still gobble up 11Mbps down. Not too shabby.
jadwv2210 said:
The speed depends on what the hardware is capable of. The 802.11n standard supports up to 300Mbps in theory. In theory because hardware hasn't been made that is capable of transmitting at that speed.
Click to expand...
Click to collapse
If you want to shell out some cash you can get a router that in theory can reach 450Mbps with the matching adapter. I don't know of a laptop or other device that comes on the shelf with that type of adapter. The routers and adapters have a 3x3 setup, so if all three chains are enabled, and you live in a Faraday cage, you could theoretically get 450Mbps out of it. A bit extreme right now, as most people don't have a clue about the benefits of 5Ghz and using that for media like set top boxes home media streaming. LinkSys actually have a nice 4 port Wi-Fi adapter specifically for that. Plus in your PS3, XBox, satellite receiver and Popcorn Hour and you are good to go! No wires needed with the exception of the cables to the adapter.
jadwv2210 said:
The speed depends on what the hardware is capable of. The 802.11n standard supports up to 300Mbps in theory. In theory because hardware hasn't been made that is capable of transmitting at that speed. And he is no doubt talking about through a local network. If he is talking about internet bandwidth, I envy him lol.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Worlds fastest wireless network - 1.2Tbps.
But yeah, you're right............traditional wireless won't do it.
yea its plenty fast at the 72 i connect was just curious because the laptop connects at different speed. I have samba share installed so have a network drive from phone so just seeing if had any input. I did notice when looking in my router lastnight that when i connected at my 72 that it actually does go faster in burst. my router has dd-wrt so shows connected devices and stats i saw it change connection speeds up to like 110 briefly. so it should be good.
It may interest you that in the UK the government agency that polices advertising made the Wifi people take the speeds off their ads*. IRL none of the G access points ever made 54 MBps nor the B 11mbs. It is always the same, people quoting perfect condition maximums which are never achievable.
* Try going to linksys dot co dot uk and have a look at their ads (can't post links yet)
grenefroggie said:
I am assuming the OP is referring to the modulation rate his phone is connecting to the router with. I don't know a lot about the wireless adapter in the Atrix aside from it being able to do 802.11 a/b/g/n. However, I am pretty sure the N capability of the wireless adapter has the highest modulation rate of 72Mbps when running on 1 chain in a 20Mhz channel (to my knowledge the Atrix only has one Wi-Fi antenna in it). So assuming you have a great Wi-Fi signal to your wireless router and low noise, 72Mbps is the highest modulation rate your phone will achieve. In order to achieve 150Mbps, the wireless access point you connect would have to be running in 40Mhz channels before the phone could benefit from the router's 150Mbps capability.
Since the Atrix is 802.11a capable, I bought a dual band router and reap the benefits of being the only one in my neighborhood using a 5Ghz capable router. While I only connect at best with 54Mbps, I can still gobble up 11Mbps down. Not too shabby.
If you want to shell out some cash you can get a router that in theory can reach 450Mbps with the matching adapter. I don't know of a laptop or other device that comes on the shelf with that type of adapter. The routers and adapters have a 3x3 setup, so if all three chains are enabled, and you live in a Faraday cage, you could theoretically get 450Mbps out of it. A bit extreme right now, as most people don't have a clue about the benefits of 5Ghz and using that for media like set top boxes home media streaming. LinkSys actually have a nice 4 port Wi-Fi adapter specifically for that. Plus in your PS3, XBox, satellite receiver and Popcorn Hour and you are good to go! No wires needed with the exception of the cables to the adapter.
Click to expand...
Click to collapse
So the Atrix is 5Ghz capable? You said 802.11a.. It won't work at 802.11n in that frequency? It's so noisy in this area in the 2.4 range when I do a spectrum sweep there is no clean frequency. Im thinking of grabbing a 2.4 CPE with 36 dBm transmit power and place it on my kitchen counter. I'll blast every router in range out haha
Mine too. Both Asus Eee Pad Transformer Prime and SE Xperia Ray are all max out at 72 Mbps.
I connect to the 5Ghz frequency at my home everyday. Seems faster than the 2.4 connection. I can't comment on battery savings though.
MB860, CM7.2.0, Faux 026b1 1Ghz
Not that this has that much to do with the nexus player but I'm looking to get a new router. I do a lot of streaming and have at least 12 devices connected minimum. I currently have a Netgear R6300 that I think is on the way out. Looking for suggestions and I don't really have any tech savy friends to ask that are in the same boat.
I am an early adopter and love the cisco/linksys/belkin line of routers. i always get the newest model as they are announced/released. have been on board with linksys exclusively for decades using their brand of routers.
im currently using a linksys EA9200 which is an AC3200 router. has one 2.4 side and two 5ghz sides. the router senses the slower traffic and places it on the proper side whereas faster devices will be steered to another one. does this all automatically. has more features but that is a nice setup about this router.
I also have a hub and use 9 machines (wired and wireless) with this unit.
the next best router for a bit less bread is the wrt 1900 also from linksys. its built like a tank and has the ability to load up custom firmware.
http://store.linksys.com/products/linksys_stcVVcatId551966VVviewcat.htm
lots of opinions will abound this thread so have fun sifting through them all.
marctronixx said:
I am an early adopter and love the cisco/linksys/belkin line of routers. i always get the newest model as they are announced/released. have been on board with linksys exclusively for decades using their brand of routers.
im currently using a linksys EA9200 which is an AC3200 router. has one 2.4 side and two 5ghz sides. the router senses the slower traffic and places it on the proper side whereas faster devices will be steered to another one. does this all automatically. has more features but that is a nice setup about this router.
I also have a hub and use 9 machines (wired and wireless) with this unit.
the next best router for a bit less bread is the wrt 1900 also from linksys. its built like a tank and has the ability to load up custom firmware.
http://store.linksys.com/products/linksys_stcVVcatId551966VVviewcat.htm
lots of opinions will abound this thread so have fun sifting through them all.
Click to expand...
Click to collapse
Thanks for the reply. The tri band setup seems pretty sweet. Didn't even notice this one. I've been looking at Asus and netgear pretty much so far.
I got the Linksys EA6900 for Christmas and hated it.
Internet connection kept dropping, wifi kept dropping, USB printer connection "thing" didn't work with my MF printer.
Took it back and paid an extra $50 and got the Neatgear Nighthawk R8000. Also a tri-band (1 x 2.4 and 2 x 5 ghz) with auto sensing.
I love it. Everything works as expected out of the box.
In the house I have 2 smart phones, 3 tablets, Nexus Player, Wii all using Wifi and 3 PC's, 1 TV and 2 PS3's all hard wired.
I have an Asus AC66U. So far I'm happy with it. Nice features and speed and range are great. They say they are compatible with DD-WRT but when I loaded it up it was spotty at best and my data rates were about half of what I got on the stock firmware. I reverted back because I would rather take speed and stability over features. My media server uses an ASUS PCE-AC68 card and I get pretty much gigabit speeds. Link shows 1300mbps and throughput tests are consistently around 450-475mbps from about 30 feet away and through 1 wall. The NP gets about 230-250mbps. at the same distance.
Munkee915 said:
I have an Asus AC66U. So far I'm happy with it. Nice features and speed and range are great. They say they are compatible with DD-WRT but when I loaded it up it was spotty at best and my data rates were about half of what I got on the stock firmware. I reverted back because I would rather take speed and stability over features. My media server uses an ASUS PCE-AC68 card and I get pretty much gigabit speeds. Link shows 1300mbps and throughput tests are consistently around 450-475mbps from about 30 feet away and through 1 wall. The NP gets about 230-250mbps. at the same distance.
Click to expand...
Click to collapse
I also have AC66U which I run merlin wrt on (pretty close to stock firmware). Works great with NP and all other connected devices.
Konstigt said:
I also have AC66U which I run merlin wrt on (pretty close to stock firmware). Works great with NP and all other connected devices.
Click to expand...
Click to collapse
I had some TP-Links, Belkins and even Linksys routers but this one is most stable one - not to mention the transfer speeds, Merlin firmware is updated daily.
I just have an airport extreme.
So far I tried a Nighthawk R8000. First one was junk out of the box. Tried a second one and I like it. I tried the Linksys AC3200. I thought the range was terrible so I went back to the Nighthawk. I have a ASUS RT-AC87U on order. I'll try this but so far I'm pretty happy with the R8000
Hi guys, I'm having a really weird problem with my phone. The wifi connection is super slow on my Nexus6P, but on my macbook it is fine as it should be. I tested on two more phones, one iPhone and my OnePlus one, wifi works fine on both of them.
I tried restarting my phone and nothing, I did a factory reset on my phone and the same problem still happens.
When I did turned of my router for like 2 minutes and then turned it on again, the wifi connection on my nexus6p worked fine for some minutes and then got slower again. Can someone help me please? Or someone having the same issue?
Make sure your router firmware is up to date.
Sent from a 128th Legion Stormtrooper 6P
I can run my broadband from the 6P flat out at 72Mb/s so its more than capable. Are you running 2Ghz or 5Ghz wifi?
Exactly what 400ixl asks. On the 2.4 Ghz band, I get full speeds of a little less than 72 Mbps. On the 5 GHZ band, I get about 1/3 less speed, even though I'm sitting in the same exact spot, with the 6P in the exact spot.
My laptop experiences the exact same scenario as well. But on my laptop, I can see the actual connect speed, not just the data transfer speed, but the connection speed to the router. The connection speed (that always varies while sitting still) is always greater on the 2.4 Ghz band than it is on the 5 Ghz band. The transfer speeds always coincide with the band I'm connected to. The lower the band connection, the greater connection speeds & transfer rates. The higher the band connection, the slower the connection speeds & data transfer rates.
And I have an older Netgear WNDR3600 running DD-WRT so it's pretty much tweaked to the max!
I have opposite effect as above people with 5ghz being faster for me and 2.4 being about 1/2 to 2/3 the speed of the 5ghz, but I live in a town house so it could be related to the many neighbouring wifis on 2.4ghz. Here's my 5ghz speed.
I get full on both, but I don't have congested channels where I live. Test it on both, also check for congested channels where you are.
400ixl said:
I get full on both, but I don't have congested channels where I live. Test it on both, also check for congested channels where you are.
Click to expand...
Click to collapse
Good point that I missed completely! I also live in a townhouse (as does frigidazzi) with many, many neighbors that are using FIOS. The 2.4 band is packed with at least 20 signals I can see with inSSIDer. The 5 Ghz band is completely open though.
I use channel 8 because most every FIOS user around here uses channels 1,6 & 11 so I try to keep away from cross channel interference by finding the weakest broadcast channels, which is channel 8.
My router is upstairs & my devices are on the main floor. The higher the frequency, the less penetration through walls, floors & such. It explains my situation with slower speeds at higher frequencies.
I have this problem too. I cannot get above 30mbps on my 6p, but my HTC One m8, sitting g right next to it will get 120mbps. I've tried everything I can think of to fix it but I get it on both 2.4 and 5 ghz bands.