Bug/Feature problem - XPERIA X2 General

My X2 has a problem. Probably needs hard reset however I'm not sure if it's not hardware fault. The problem is the device is selecting items from the screen by itself, like I would touch the screen.
And by the occasion of testing the problem, I discovered one thing:
When I shake the phone the Tiles on Tilewave are moving/jumping!
Did anybody experience this?

it happened to me after I installed A2DP switch and this here and even after i uninstalled both the problem continued, so I did a hard reset and everything went back to normal.

Related

Cingular 8525 resets when sliding out keyboard

recently my 8525 has been resetting when I slide out the keyboard. It usually takes a few seconds. But after i slide out the keyboard, my screen dims out then the phone resets. Any solutions
just for curiosity, but does the screen rotate??
personally, I'd just do a hard reset and if that doesn't fix it, back to Cingular it goes
I'd be inclined to do a hard reset as well, I might first think about whether I'd installed any new applications and remove them to see if this had any effect. Sometimes you find very strange behaviour - I installed a clock application that I discovered was preventing me from opening the camera application!!
If your still in warranty, get the hard reset done in good time - if the problem persists after that get it back to the supplier. I think though in this case the reset should work fine.
Mike

Touch Screen Calibration Troubleshooting

The touch screen alignment on my Diamond occasionally gets misaligned and inadvertently aligns itself without warning. When I tap in one place, it registers in another. It is a really big nuisance especially in circumstances where I need to quickly input data into the PPC.
I was hoping that somebody had a solution for this?
odell said:
The touch screen alignment on my Diamond occasionally gets misaligned and inadvertently aligns itself without warning. When I tap in one place, it registers in another. It is a really big nuisance especially in circumstances where I need to quickly input data into the PPC.
I was hoping that somebody had a solution for this?
Click to expand...
Click to collapse
have u tried realign???
I had that problem on my 2nd Diamond. Tried different version of ROMs but the problem still there, so I returned it and get a new one. My first one had a problem of self-restarting. Finally, now I'm happy my third Diamond
So ask if you can get a replacement, otherwise send it for repair.
Probably worth mentioning. I had a similar problem and it was driving me mad.
I was about to return the device for service, then I discovered it was a result of installing the GSen screen rotation program. I'd installed it to try it a few weeks ago and forgotten about it.
It turned out it that was switching the digitiser orientation without rotating the screen.
Uninstalled GSen and it's all fine now.
I'm hoping that uninstalling GSen will do the trick. Will give it a try tonight.
GSen was uninstalled and the problem still exists. Does anyone know if there is a firmware upgrade that handles this problem?
Have the same problem...
The touchscreen decalibrates itself.
2 minutes after calibrating it changes everything again. And just randomly.
Seems to be a hardware mistake, because even a hard reset didn't bring any help.
Anybody a solution?
Greetz

Problem with display

Hi,
I have SE Xperia, but I have big problems with the display. Sometimes the display freezes and I can’t do nothing with it. The problem is only with the touchscreen, because the buttons are working. I have to restart the device to fix the display.
After many conversations with the company, which sold me the phone, they changed my phone. Now with the new one I have the same problem. This problem appears two times since I’ve changed it. I’m working with Spb Mobile Shell 2.1.5.
Please give me some advices – Should I take my money back, or there is an answer to my problem. PhonesROM is new – 02.02.09.
Otherwise the mobile phone is working very good, except this freezing display sometimes
And now I don't know how I proceed
Well
If you have changed it once already, maybe you should consider that something you are installing, or something in the way you are using the phone is causing it to "lock up".
As I have discussed in a couple of threads today, there is a known bug that causes the touch screen to stop responding and no known fix except to go a little slower.
In your case it sounds like it's not related and infact something (maybe spb?) is stopping your touch screen from responding completely.
I don't know where is the problem but sometimes it appears and that is too bad.
Perhaps use SPB Panel for X1 instead of SPB mobile Shell...
(Sorry for my bad english...)
Tst
My advice would be to do a hard reset, test it out for a while and make sure it is not happening. If it is it could need a ROM reflash or it has a hardware problem.
If not, then just install things back one at a time and test to make sure it's not happening again.
I don't use SPB shell because when I did, I noticed it wasn't very responsive.

Touch Response Problem

I have a Sprint Touch [Vogue]. It has served me very well up until recently.
One day, I was using my phone normally when the battery died. No big deal right?
Well, I charge my phone and reboot it. For some reason, Windows is EXTREMELY slow and unresponsive. I figure that something vital had been corrupted by the battery's death, and that it was nothing that a hard reset couldn't fix.
I performed a hard reset.
I let the utilities for the first boot run to customize the phone. Everything seemed pretty much normal. I configured my settings, re-added my contacts, etc. Then I turned the screen off [with the power button].
I turn it back on later to do something. I touch the screen. It immediately and accurately detects the touch's location, but it continues detecting a touch. For 20-30 seconds, after the input has stopped.
It was strange, so I soft reset the device. It booted, with the same problem. So I performed another hard reset. I did some configuration [the response acting normal at this point], and then turned the screen off. Turning it back on brought the same problem back.
This problem still exists on my phone, even after numerous hard resets and even ROM flashes.
A better description of the problem: When the device is first turned back on [meaning brought out of standby], its touch response is messed up. It will immediately and accurately detect any touch input, but it will continue to detect the input for up to 30 seconds AFTER it has been released, as if you were holding it the whole time.
WHY is this???? My phone is almost unusable because of this!!!! I can still place/ receive calls, using the navigation buttons and the red and green buttons. But the touch response is screwed!
Can someone please shed some light on this problem I'm having?
Phone specs: Windows Mobile 6.1, HTC / Sprint customized. Minimal third party software is currently installed.
[I've already determined that third party software is not the problem, because i haven't installed any!]
Possible solution
Hi,
today I experienced something similar to your description - no touch response when I tried to pickup a call. The strange thing is that last night everything was working and no settings were modified nor programs were added/removed. The screen suddenly 'died'. At the moment I am using it through a program MyMobiler which brings the mobile display to the PC and I can use the mouse to control the phone (it is like VNC for the phone screen, the phone is connected with ActiveSync).
This is temporary solution untill I finish my backups of files, programs, settings. I didnot performed hard reset yet, hope this will solve my problem
In the following link there is a 'magical' solution - to remove the screen protector:
http://www.htcwiki.com/thread/1112981/LCD+or+Touch+screen+not+working
P.S. I had removed the screen protector and voilá - the screen is now touch responsive. The root cause of the problem obviously is the dust between the screen and the protector which results in constant screen pressing - and as a result no accepting my finger presses.
I hope this will work for you and others with similar problem.
I had a similar experience with an old Vogue.....In my case, there was no battery death precursor, but it just started acting up. Not too long thereafter, I noticed the screen/digitizer was forming what looked like an air bubble between the digitizer and the LCD on one place of the screen. The screen was becoming defective. I eventually had to buy another Vogue from a friend who didn't have a clue of the 6900's potential, and didn't want his anymore, so I got it cheap.
Sounds like your screen/digitizer may be on it's last leg.

Leo Screen freeze crash Issue

I have been having some problems with my leo where i cannot unlock it after coming out of standby. The screen just freezes.
And sometimes when i press the END button to get it out of standby, the key lights come on, but nothing else happens.
Apparently others have this issue too! - check out u-tube video:
http://www.youtube.com/watch?v=wqJw5omurLA
Has anyone else had this or still having this? Do i have to return my phone for another one?
Have you tried a hard reset?
ronald_adi said:
I have been having some problems with my leo where i cannot unlock it after coming out of standby. The screen just freezes.
And sometimes when i press the END button to get it out of standby, the key lights come on, but nothing else happens.
Apparently others have this issue too! - check out u-tube video:
http://www.youtube.com/watch?v=wqJw5omurLA
Has anyone else had this or still having this? Do i have to return my phone for another one?
Click to expand...
Click to collapse
Haven't had the issue. Vaguely read about this somewhere else, might be related to the default WM 6.5 lockscreen. Disable it and try something like S2U2 and see if u still have the same issue.
I have same problem with my device. Is this software or hardware problem? I have to do hard reset, and after that display can be stack. So I have to do soft reset, and phone working. It happens to me 2 times in one day, both times after I have been in room with very bad signal. Maybe that can produce problem. Symptoms are same as on YouTube video.
Does anybody know how to solve this?
i face this b4, it happend few times a day. but after i do hard reset the problem is solved. i think should be installed something conflict with the phone or inproper amended some registry
i used to have this but now it is less common after I have installed WMTask to Close applications when I hit "X" (instead of WM just minimizing the app). In effect it frees up memory and hopefully does cause your HD to struggle for memory when waking up?
guys,
for your info, I installed a new ROM and this didnt help. So it is NOT a SOFTWARE issue. I returned my phone for a new replacement unit and no more issues.
Sorry to say but if u have this problem u need to send your phone back.
I now have no more issues!
Mine has been doing this a lot. Turning it back on just results in the keys lighting up and nothing more.
Work around is to turn on so keys light up, hold down power key until lights all go off, then press power key again ... it will come back to the lock screen.
Thanks for your prompt answer.
It is not seems as memory problem, because if I remove and return battery problem stay. Maybe it can be problem with display driver. Also it is a little strange that after hard reset, I have to do soft reset to get it work again. I not like to change rom version, because it can void my guaranty, and maybe it is hardware problem.
Mine does exactly the same thing once it gets warm. Decided to return it after trying multiple hard resets. ROM changes and S2U2. Made no difference.
As I've joked on this forum before (although it's true), I had to put mine in the freezer to get the screen to work again so it sounds to me like a hardware issue.
Mine's going back for a replacement next week...
HTC HD2 freezes quite often Solution
le_paulo said:
Mine does exactly the same thing once it gets warm. Decided to return it after trying multiple hard resets. ROM changes and S2U2. Made no difference.
As I've joked on this forum before (although it's true), I had to put mine in the freezer to get the screen to work again so it sounds to me like a hardware issue.
Mine's going back for a replacement next week...
Click to expand...
Click to collapse
Well thanks for the solution so if we get that bug , just put your brand new HTC HD2 on the freeser lol
I had similar problem four mornings in a row. Hardware keys would light up but screen dead. Soft reset got it going again, and a hard reset made no difference, even without reinstalling my softwares (I had a clock alarm set for each morning, maybe this is just coincidence). Someone on another forum with a similar issue suggested installing MemMaid, and for me this has worked. Running a regular 'clean' has meant that the problem has not returned, for three days now. So far! I notice that every clean finds many duplicate or invalid 'notifications', not sure if these somehow accumulate and cause the device to crash? Maybe worth trying? So problem for me at least is software related. HTC need to sort this as it is really annoying, and MemMaid is only free as a trial.
dazz29 said:
I had similar problem four mornings in a row. Hardware keys would light up but screen dead. Soft reset got it going again, and a hard reset made no difference, even without reinstalling my softwares (I had a clock alarm set for each morning, maybe this is just coincidence). Someone on another forum with a similar issue suggested installing MemMaid, and for me this has worked. Running a regular 'clean' has meant that the problem has not returned, for three days now. So far! I notice that every clean finds many duplicate or invalid 'notifications', not sure if these somehow accumulate and cause the device to crash? Maybe worth trying? So problem for me at least is software related. HTC need to sort this as it is really annoying, and MemMaid is only free as a trial.
Click to expand...
Click to collapse
I am not quite sure that is software problem, if you done hard reset, and display still not respond on touch.
Soft or hard reset could clear the problem, I just mean that a hard reset didn't avoid the problem coming back. My current ROM is the official 1.48, didn't have this issue on the previous official ROM.
I got confirmation from service today, that it is hardware issue with phone display.
Bogi79 said:
I got confirmation from service today, that it is hardware issue with phone display.
Click to expand...
Click to collapse
How do you know if youre phone should be replaced? Does it happen every time?
This happens to me every so often.
ya, I'm experiencing this as well. real drag!
The same thing happened to me aswell.
I recieved a message and when I tried to unlock the screen, nothing happened. The hardware keys worked but the screen didn't register my touches.
Tried soft reset, didn't work. Removed battery for a while, didn't work. Hard reset, didn't work. Flashed official ROM from HTC, didn't work.
It's been sent for repair. Hope I get it back quickly
I actually don't. But I insist to get phone replaced. I wrote appeal to company where I buy phone. Also I wrote down S/N and IME so I can check if I get new one.
Got the exact same problem, have been complaining about this in different topic here.
Sometimes couldn't unlock screen for many hours... then suddenly works again.
I've tried everything : decreasing/inscreasing screen sensitivity with reg, removing the screen lock, stopping the weather animation as suggested, putting a second finger in a corner while touching the screen : NOTHING WORKS
The only thing i'm convinced : it IS a hardware problem.
When the screen didn't react at all for some hours, sometimes playing with its humidity could help for a few minutes only ( by cleaning the screen with some special wet lcd cleaner or cleaning the screen with some humidity from my breath).
Also i'm travelling a lot (several countries a week)... and noticed THE PROBLEM APPEARS IN COUNTRY WHERE HUMIDITY IS HIGH. (that's also the reason why freezer could help. in a freezer, it's so cold, that the humidity is not in the air anymore, but is in ice state).
MAYBE SOME GOOD NEWS:
I recently bought the HTC screen protection for the HD2 (5 days ago).
Thanks to it, Air humidity doesn't touch the screen directly anymore.
And the problem hasn't appeared, not even once!
I just arrived a few hours ago in the country where i always had the problem (cause of its high humidity), and guess what ? Screen is still working great
I'll keep u up to date if problems come back.... but for now, i really think this is the solution (with logical explanation).
Kaemon.

Resources