Related
Hi guys, I would really appreciate any help you could give me on this issue.
OK so when i first tried to activesync my mogul it wouldnt work. It wouldnt start up, wouldnt recognize my device...
I read the manual and it said to uncheck the usb to comp. in settings...
I did and it worked!
now a couple of days later everytime i try to activesync, you know that beep it makes when u connect and disconnect.... well its doing that a thousand times almost every seconed and i get a pop up that says "usb device not recognized" . Device has malfunctioned...."
then another that says "couldnt install properly" or something like that"!! ----then it disconnects.... (still beeping though...)
yes my usb plugs are fine i checked with other devices....
Whats wrong?
Thanks in advance
-Devin
anyone have any ideas....
have you tied a different USB cable or on a different computer?
Thanks to all great developers from here, i've already saw a lot of amazing softwares and use some of them.
I was wondering if it's possible when we connect the phone to USB, the phone shows the normal popup asking if we want activesync or USB storage, but with another option that is "Charge battery".
It would be great because i use a lot of computers and i don't want it to sync neither to be a usb storage.
Thank you all..
PS: Sorry for my bad english
neives said:
Thanks to all great developers from here, i've already saw a lot of amazing softwares and use some of them.
I was wondering if it's possible when we connect the phone to USB, the phone shows the normal popup asking if we want activesync or USB storage, but with another option that is "Charge battery".
It would be great because i use a lot of computers and i don't want it to sync neither to be a usb storage.
Thank you all..
PS: Sorry for my bad english
Click to expand...
Click to collapse
I second this, Im using a lot of different working PCs, also outside the country, so only charging without syncing, sharing internet or mass storage would be a great thing!!!
If you use a standard mini usb connector as opposed to the HTC one, it should only charge the phone. Works for me.
HoTaCe said:
If you use a standard mini usb connector as opposed to the HTC one, it should only charge the phone. Works for me.
Click to expand...
Click to collapse
Even standard mini-usb leads use all the pins. You want a usb cable that only has the middle two pins, buy a cheap one, use a pencil or tweezers and pull out the outer pins and you'll have a power only cable, easy.
Antimus said:
Even standard mini-usb leads use all the pins. You want a usb cable that only has the middle two pins, buy a cheap one, use a pencil or tweezers and pull out the outer pins and you'll have a power only cable, easy.
Click to expand...
Click to collapse
That's not an option for me because sometimes i want to charge and other times i want to use as usb storage.
And i also have a cradle and i'll NOT remove pins
I've already seen here a diferent popup with an option to use phone as modem, so i think this shouldn't be difficult.
Thank you
Just select internet connection sharing..
that way it won't sync..
Just turn it off!
An easy way to prevent the diamond from connecting to the pc but still charging it via usb cable is to just press the power button and put it to sleep.
SierraEcho said:
An easy way to prevent the diamond from connecting to the pc but still charging it via usb cable is to just press the power button and put it to sleep.
Click to expand...
Click to collapse
Iam using that method ..
my method
i use bluetooth to sync and have disabled 'allow usb connections' in activesync so that it charges ONLY via cable.
SierraEcho said:
An easy way to prevent the diamond from connecting to the pc but still charging it via usb cable is to just press the power button and put it to sleep.
Click to expand...
Click to collapse
That's another point, i don't want put it to sleep.
The perfect solution for me is an option to put it to charge, because i don't want to desiblr activesync because i use it on my computer, and don't want to put it to sleep, because i want to use it.
Thank you.
bumping because I second (er, third) this notion. I don't mind putting it to sleep, but I work in a flaky reception area so my damn phone is always waking up on its own. And everytime it does, guess what pops up? Yeah, annoying.
Who's the ninja that added that connect as modem feature? I have that installed and love it. Maybe if we all ask nice he/she will add a "Connect to Charge" option...
i use to chose "Mass storage" when i dont want to activsync
adempozhari said:
i use to chose "Mass storage" when i dont want to activsync
Click to expand...
Click to collapse
Yes, thank you for your input...
Now what we are looking for is an option to...
...don't sync...
...don't use Internal Storage as a disk drive...
...don't share internet connection...
...when connecting the device with a usb-cable to a PC.
We just want it to charge the battery, nothing else.
Because we don't want this to be permanent and we don't want to lose functionality by...
...switching off the device...
...disabling active sync on the pc...
...pulling pins from a cable...
...we are asking for a fourth option in the USB to PC menu.
And while we're at it:
I would like a shortcut to te USB to PC menu too, because I like to switch a lot. Anyone?
rvdgeer said:
Yes, thank you for your input...
Now what we are looking for is an option to...
...don't sync...
...don't use Internal Storage as a disk drive...
...don't share internet connection...
...when connecting the device with a usb-cable to a PC.
We just want it to charge the battery, nothing else.
Because we don't want this to be permanent and we don't want to lose functionality by...
...switching off the device...
...disabling active sync on the pc...
...pulling pins from a cable...
...we are asking for a fourth option in the USB to PC menu.
And while we're at it:
I would like a shortcut to te USB to PC menu too, because I like to switch a lot. Anyone?
Click to expand...
Click to collapse
yea it would be great if someone can create a 4th option for us to be able to select "Charge Only" how perfect is that?
I'm not sure what you're really asking for, but i use an old small program called kill active sync. It still works for the latest activesyncs on XP. You can google for a few more versions. This will let you charge without having sync pop up annoyingly.
WM5
you could also enable this tool, so you PPC will be acknowledged as an USB Storage device. So you can USE all funktions except files form your storage card. It charges without sync.
http://freewareppc.com/communication/wm5torage.shtml
ecor said:
you could also enable this tool, so you PPC will be acknowledged as an USB Storage device. So you can USE all funktions except files form your storage card. It charges without sync.
http://freewareppc.com/communication/wm5torage.shtml
Click to expand...
Click to collapse
HexiumVII said:
I'm not sure what you're really asking for, but i use an old small program called kill active sync. It still works for the latest activesyncs on XP. You can google for a few more versions. This will let you charge without having sync pop up annoyingly.
Click to expand...
Click to collapse
Please read this post.
Antimus said:
Even standard mini-usb leads use all the pins. You want a usb cable that only has the middle two pins, buy a cheap one, use a pencil or tweezers and pull out the outer pins and you'll have a power only cable, easy.
Click to expand...
Click to collapse
I think you got the usb pinout wrong there, the inner two pins are the data and the outer two are the power supply.
It would also be sufficient to only remove one pin.
And the Idea of charge only would be very useful and is a good idea, I imagine it could also be accomplished from the PC side.
Funny Thread, isn't it?
People just don't read.....
I second the idea of rvdgeer because i'm used to charge my diamond via car radio usb port and have some trouble with this. I cannot put it to mass storage because i need access to it to get tomtom working.
So i regularly use the modem option.
But the only purpose of this thread is to find an answer if, or if not possible to add a 4th setting to usb connection popup which is "charge only"
Maybe the developers/chefs can answer this question or somebody has a serious idea how to get this function
Thx for all the other ideas, but the best would be a 4th popup option
Maybe it's different on the Diamond from the Touch Pro, but on the PC if you Right Click the ActiveSync icon in the tasks bar (next to the clock) select Connection Settings then uncheck the box labeled Allow USB Connections. It continues to charge the phone without using anything else.
hi had my touch hd for ages now, and it connected to my pc with no problems, now all of a sudden its stopped working it charges but doesnt let me transfer files to it, i tried reset hard and soft
please help
go into connection setting- usb to pc setting and under the 1st option Activesync, UNTICK Enable faster data sync...
it worked for me
why don't you try to connect to your PC via Bluetooth? When that is working, chek another USB cable to see whether your cable is faulty. Might be a cause because it suddenly stopped working. Good luck
Dan - are you trying to connect with ActiveSync, or as a USB storage device?
Neelesh35 said:
go into connection setting- usb to pc setting and under the 1st option Activesync, UNTICK Enable faster data sync...
it worked for me
Click to expand...
Click to collapse
i tried that , but it didnt work
kuzibri said:
why don't you try to connect to your PC via Bluetooth? When that is working, chek another USB cable to see whether your cable is faulty. Might be a cause because it suddenly stopped working. Good luck
Click to expand...
Click to collapse
my laptop hasnt got bluetooth, its not the cable as ive tried 2 cables, they charge but my htc doesnt gimmie a choice to active sync, or mass storage or internet
johncmolyneux said:
Dan - are you trying to connect with ActiveSync, or as a USB storage device?
Click to expand...
Click to collapse
both it doesnt give me the option when i plug in htc to my pc, it used to be fine but now doesnt work
the same thing happen with me , i did every thing
change cable
check for usb port
.....etc
i can connect through bluetooth but it didn't sync
when i boot i have serial not USB in the screen with color
plz help me
Assiri said:
the same thing happen with me , i did every thing
change cable
check for usb port
.....etc
i can connect through bluetooth but it didn't sync
when i boot i have serial not USB in the screen with color
plz help me
Click to expand...
Click to collapse
Have you updated the usb drivers - http://forum.xda-developers.com/showthread.php?t=524619?
ClydeB1 said:
Have you updated the usb drivers - http://forum.xda-developers.com/showthread.php?t=524619?
Click to expand...
Click to collapse
i can't because in bootloader in the bottom of screen i have SERIAL not USB
can anyone help?
danjohnson19855 said:
can anyone help?
Click to expand...
Click to collapse
I hope it's not this
but it's possible to break the data connection (wires ?)
but not the rest of a usb socket
I did it to an mp3 player
all I could do is charge it
if the connections are ok and it does't ask (active sync/disk/connection sharing)
you might have ticked the box that says don't ask
that can be set back again can't remember how
but there is a thread on it somewhere on xda
found it
start -> settings -> usb to pc ->
I do have exactly the same problem....tried EVERYTHING....no success....surfing the net saw many are experiencing the same problem...
garyjmobey said:
I hope it's not this
but it's possible to break the data connection (wires ?)
but not the rest of a usb socket
I did it to an mp3 player
all I could do is charge it
if the connections are ok and it does't ask (active sync/disk/connection sharing)
you might have ticked the box that says don't ask
that can be set back again can't remember how
but there is a thread on it somewhere on xda
found it
start -> settings -> usb to pc ->
Click to expand...
Click to collapse
thanks for help i unticked the box , but still doesnt work , is there anyway to chance roms without a usb connection
You can flash from SD card. I have same problem with TyTN II, charging when turned off, no usb connection.
igord said:
You can flash from SD card. I have same problem with TyTN II, charging when turned off, no usb connection.
Click to expand...
Click to collapse
how do u flash from card?
i use my laptop to charge my phone and i also do this at work, i realise i can just plug in the usb wall charger but ideally what i want is the ability to plug in the the usb into laptop / pc and get the
Choose a connection type
1) activesync
2) harddrive
3) internet sharing
4) just charge
any ideas?
Just select either activesync or disk drive, and then press the power button to turn it back off...
when the connection screen pops up just click activsync and check the little square box " Don't Ask Again" and it won't pop up anymore
SEE SCREENSHOT
i want to use the phone ... its the only thing that keeps me sane at work lol
You dont have to select an option. When the menu comes up 'activesync, hard drive, internet sharing', , , just press the home button and the menu goes away, the phone charges.
You could of course just choose activesync, it wont affect anything if there is no partnership set up on the laptop.
if i click dont ask again doesnt it just set my selection as the default selection?
if you press home it still does what was last selected (such as harddrive) my problem is i use it at work where it will freak out if harddrive is found or it activesync is attempted to connect
larrytango said:
if i click dont ask again doesnt it just set my selection as the default selection?
Click to expand...
Click to collapse
No, the popup won't appear anymore and remember that setting.
There's no "do nothing". So get your USB charger out
kilrah said:
No, the popup won't appear anymore and remember that setting.
There's no "do nothing". So get your USB charger out
Click to expand...
Click to collapse
i realise no option exists im hoping someone has a way to do it??? any ideas
I'm not sure i understand the problem, are you saying your works computer will recognise it as a storage device and 'freak out'? Because it won't, it will happily ignore it.
samsamuel said:
I'm not sure i understand the problem, are you saying your works computer will recognise it as a storage device and 'freak out'? Because it won't, it will happily ignore it.
Click to expand...
Click to collapse
i work in a banking environment and amazingly they're not too happy about people with unauthorised phones lol, if u plug in my charger to the usb port it will either select it as harddrive in which case loads of nice messages appear and people are alerted (manager once plugged a usb drive into my pc forgetting that i didnt have the correct permissions and this happened) and if selected activesync the software (which is installed and i dont have permissions to stop it) would kick start and i expect cause similar results
on my old phone (ignito / diamond 2) i used an old usb cable i had that was damaged and data lines where broke and thus it just charged - i guess i could do that i just was wondering is a software tweak existed.
ahhhh gotcha. Wasn't thinking hard enough. heh.
Looks like your only option is taking the charger to work with you. (I have several 3 pin chargers that have no cable, just a USB slot made by Garmin that i have positioned around the house, and at work, , saves dragging the charger itself about, just need the cable.)
Can you use the Galaxy, with a USB connection running in the background, without having the USB locking screen with the big USB image on it ?
You could do this with my old Windows mobile no problem, am I doing something wrong ?
Not in the KIES mode
How then ?
Just connect in usb mode and it should work. It does for me anyway.
Sent from my GT-I9000 using XDA App
Go into your USB settings and set it to Always Ask... then whe you connect the phone to PC, if you just want to charge it.... don't select Any options. just hit the back button on the bottom right
So I have set it up to ask, I have tried to select each one and the only one that connects me is the kies option, with the big USB images...why is it so weird, surely you put the usb in and it connects why all these options...sorry confused
yea what does "media player" mean in usb connection settings?