Hi,
Just upgraded from JMA to JMC then did a factory reset using the XEF CSC. But now I cannot download anything from the market, and I still have the old market it doesn't update itself.
Anybody know what I can do ? I tried using my wifi and with 3G
EDIT: Ok seems to be solved, after the 4th reboot I can now download applications, but I still have the old market.
I'm not sure, but I had a similar problem with the CSC and had no applications in samsung app, then I flashed the JM6 of CSC and has put everything in place could be the csc of jmc to you
Related
Hi guys,
Well I've flashed my Tab up to JM6, but now I have a rather odd issue.
when I go to *#1234# it shows like this....
PDA: Blank
Phone *****JM6
Modem: Blank
I've tried reflashing back to JJ4, and everytime it is failing on boot.bin. This is with both the P1_Blank and P1_EU PIT files.....
I'm now a little lost on what has happened. The device is working fine (From what I can see) on JM6, but the fact those two options are blank and I seem unable to revert to JJ4 are concerning me.
If anyone else has flashed to JM6, does yours display the same?
Have you tried clearing caches and erasing data to factory default before flashing ?
pda p1000xxjm6
phone p1000xxjm6
csc p1000xxjm6
I'm pretty sure that this is fine. I get the same (PDA and CSC blank) on JM6 and everything works fine as far as I can tell.
My guess is that the Samsung-specific *#1234# menu is just there to keep track of carrier-specific customizations (CSC). On the internal flash storage, there is no such distinction; rather, the CSC overwrite part of the base system. In particular, you get a 100% functional device if you don't apply the CSC.
This was my first tab which had a fault and was replaced. Now working fine.
Old post, forgot to update it.
Sent from my GT-P1000 using XDA App
How did you fix this problem? I got the same? I have no way of replacing my tab since there is no service center near by.
HELP
Hi,
I just installed kies today and got a message that my tab (p7510) has not an official firware and cannot be updated. I bought the tab in canada and live in germany.
Afterwards I used odin to flash xwkg7 (only pda, not bootloader).
Since then Kies does not show the current firmware anymore. The field is blank.
Any ideas how I can fix this?
Klaus
I have the same problem.
I found the solution by myself.
I just flashed with odin "PDA". This caused that /system is overwritten, which is good. However, I did not install "CSC" which is usually also copied to /system. As a matter of fact, I didn´t have the csc stuff and this caused Kies to freak out.
Solution:
Use odin to flash PDA *and* CSC at the same time!
Never ever flash PDA alone, because then your csc files are gone.
Hope this will help someone
However, now Kies tells me that I do not have an official firmware version on my tab and thus no updates through Kies are supported. Damn... Ideas?
Hello Klaus,
This I had already tried again and got the message as you've described. Who can help us.
Hello S3 Users, i`m the developer of https://play.google.com/store/apps/details?id=com.manniakk.cscselector
As you know in the new XXELLA rom Samsung changed the security policy and there is no way to change the CSC without root permissions.
I made a new version that should do the work but it is still not on the market. I need your help to test if it working on all XXELLA roms and then i`ll update the market version. It is signed with the same signature so you can just update the old version with this one.
It will require root only if the normal way fails, remember that you need to have root and tick the checkbox
thanks, will try later,
I think it will be better if you move this thread to Apps and Themes Sub Section..Here it will get lost in the hullaballooo..
Awesome
Works perfectly in XXELLA
Thank you very much. Is seems to be worked on rooted XXELLA.
Have recently installed I9300XXELLA and its generally working well. I downloaded and installed your attached .apk and get the same error as the play store version:
"com.android.Preconfig not found on your device. Manual mode..."
Then displays *#272*0105# in the phone app.
I have not rooted the phone so cant check that.
greg796 said:
Have recently installed I9300XXELLA and its generally working well. I downloaded and installed your attached .apk and get the same error as the play store version:
"com.android.Preconfig not found on your device. Manual mode..."
Then displays *#272*0105# in the phone app.
I have not rooted the phone so cant check that.
Click to expand...
Click to collapse
sorry, as stated in the first post, currently there is no way to invoke the csc changer without root. If i found a way the app will be updated
Working with root. Thanks
Sent from my GT-I9300 using Tapatalk 2
I will be testing ..
Does changing csc will wipe data in root mode also?
Edit: it changed my csc from btu to inu but it changed it to kor, I had selected inu, I tried multiple times but csc remains kor.
Sent from my GT-I9300...
binYaqoob said:
Does changing csc will wipe data in root mode also?
Edit: it changed my csc from btu to inu but it changed it to kor, I had selected inu, I tried multiple times but csc remains kor.
Sent from my GT-I9300...
Click to expand...
Click to collapse
the tool is invoking the built-in configurator for the CSC Select. It can`t change the csc by itself.
And yes.. the process of changing the CSC will always wipe data
Not working for me: I choose CSC, phone reboots and when restarts CSC is BTU, not the one selected...
Seems that it works like other tools and this one froem terminal window. One solution is to flash with CSC.XXX.zip with only one region and then run app and reboot - look at Perka thread
gpvecchi said:
Not working for me: I choose CSC, phone reboots and when restarts CSC is BTU, not the one selected...
Click to expand...
Click to collapse
the app doest not change your csc itself, It runs the build in preconfigUI, that is shipped with your rom...
manniakk said:
the app doest not change your csc itself, It runs the build in preconfigUI, that is shipped with your rom...
Click to expand...
Click to collapse
I have found out that for the multi CSC to be applied successfully, you have to be on stock recovery. I flashed CF auto root by chainfire and suddenly the CSC is applied successfully. Before that, the CSC just would not change.
not work
hi to all
this csc changer not work on xella at all
when install says
com.android.confi....
my phone info is :
ap : i9300xemf6
cp : i9300xxema5
csc : i9300jvmf1
or move you to root the phone
we want an csc changer to xxela without root
plzzzz replay me
Hi i hope someone can help me ive been searching for a day now and no solution was working. I flashed my s5 with CSC BTU to firmware from Poland XEO. I was trying to flash back firmware for UK as it was original and it did but CSC is still XEO i was trying flashing again using different tutorials and using root and app it reverts back to XEO as soon as i reboot device. Tried restore in KIES too and same story. I get message in Recovery mode like Manual mode apllying multi csc apllied the csc code XEO successfuly applied multi csc. And that happens all the time. Any solutions to that please?
Easy to sort flash the latest BTU then keep wiping cache partition then reset keep doing this until it changes to BTU it may take a few goes before it does change.
Done it like 15 times already and no change? Maybe im doing something wrong? still getting that manual mode setting csc to xeo. why the hell this is happening?!
qucharski said:
Done it like 15 times already and no change? Maybe im doing something wrong? still getting that manual mode setting csc to xeo. why the hell this is happening?!
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/gal...e-csc-mods-t2887554/post56479916#post56479916
qucharski said:
Hi i hope someone can help me ive been searching for a day now and no solution was working. I flashed my s5 with CSC BTU to firmware from Poland XEO. I was trying to flash back firmware for UK as it was original and it did but CSC is still XEO i was trying flashing again using different tutorials and using root and app it reverts back to XEO as soon as i reboot device. Tried restore in KIES too and same story. I get message in Recovery mode like Manual mode apllying multi csc apllied the csc code XEO successfuly applied multi csc. And that happens all the time. Any solutions to that please?
Click to expand...
Click to collapse
How did you check for the CSC?
Can you use Phone INFO ★Samsung★ app and show all info in the CSC INFO section?
(original CSC, firmware's CSC and active CSC...)
I had this problem too. Heres how i solved it.
Flash the 4.4.2 firmware you are reverting back to and factory reset. Once your phone is set up download and install towelroot supersu and csc changer. Follow the rooting process to root your phone as shown in other guides here. Once rooted use the app to change csc to BTU. your phone will then factory reset. Once booted again flash the firmware again and once again factory reset. You should now have back BTU CSC like i did last night. Hope this helps.
Hi,
Tried to flash firmware to get rid of vodafone csc from my new s8 but csc keep staying VOD i want it BTU ideally.
Has anyone tried it yet and done it?
Need some advice
Need to flash then wipe for it to take.
Thanks for advice can you specify do you mean flash and then in recovery wipe cache and wipe data?
Anyone can help please?
Ok what he means is once flashed btu go into recovery not sure what 3 buttons to press but Google it.
Once in there wipe cache and reformat phone once more then it should change VOD to BTU that's what I did when I had my vodafone s7 and changed it to btu
It doesn't work stays VOD no matter what i do
Ok so you flashed BTU what files did you use?
Dial *#243203855#
mimo2008 said:
Ok so you flashed BTU what files did you use?
Click to expand...
Click to collapse
Hi,
Used firmware from sammobile AP BL CP CSC_OXM
peachpuff said:
Dial *#243203855#
Click to expand...
Click to collapse
Says invalid ussd code
Hi my suggestion would be 're flash the latest firmware again once installed then boot phone into recovery mode then wipe cache then format and reboot phone again one last time.
hi
i have samsung j7008 model it any problem and have now my device are boot loop (powen on appear smart service and update) so i use kises and update but time is very longer i can't wait it's time and i use odin and flash same prob… but i have emergency recovery code.so please help me solve?please i really trouble and i think crom service lock because i see it ?
paingyatitun123 said:
hi
i have samsung j7008 model it any problem and have now my device are boot loop (powen on appear smart service and update) so i use kises and update but time is very longer i can't wait it's time and i use odin and flash same prob… but i have emergency recovery code.so please help me solve?please i really trouble and i think crom service lock because i see it ?
Click to expand...
Click to collapse
I'm sorry this is for s8 if you goto SamMobile forum post in there greenman may be able to help more but to me sounds like you need to 're flash original firmware.
mimo2008 said:
Hi my suggestion would be 're flash the latest firmware again once installed then boot phone into recovery mode then wipe cache then format and reboot phone again one last time.
Click to expand...
Click to collapse
Unfortunately still VOD
qucharski said:
Unfortunately still VOD
Click to expand...
Click to collapse
Ok if you go to SamMobile forum and put a post there greenman maybe able to help you.
Sorry i couldn't give anymore I'm kinda stuck as well.
mimo2008 said:
Ok if you go to SamMobile forum and put a post there greenman maybe able to help you.
Sorry i couldn't give anymore I'm kinda stuck as well.
Click to expand...
Click to collapse
Ok just did just need to wait
qucharski said:
Hi,
Tried to flash firmware to get rid of vodafone csc from my new s8 but csc keep staying VOD i want it BTU ideally.
Has anyone tried it yet and done it?
Need some advice
Click to expand...
Click to collapse
This shouldn't be a problem so let me help. First some questions...
1. From which carrier/country is your phone?
2. Does it have a network lock?
3. Is it the Model number SM-G950F?
4. Which files did you flash via Odin (please type the actual filenames) and with which settings in Odin?
5. If you go into Settings - About phone - Software information - Service provider software. Please tell me the first and third line there under this point.
maik005 said:
This shouldn't be a problem so let me help. First some questions...
1. From which carrier/country is your phone?
2. Does it have a network lock?
3. Is it the Model number SM-G950F?
4. Which files did you flash via Odin (please type the actual filenames) and with which settings in Odin?
5. If you go into Settings - About phone - Software information - Service provider software. Please tell me the first and third line there under this point.
Click to expand...
Click to collapse
Hi,
1. Bought from Vodafone UK
2. Removed lock by code
3 G950F
4 Sorry don't have access to my laptop now but I've
Downloaded latest btu software from sammobile
unpacked it and used as per instructions. Tried using either home_csc or the other one but no luck either
Settings tried just standard and tried pit and reformat didn't work either
5. SAOMC_SM-G950F-OXM_XEU_077
XEU/XEU/VOD
when go into recovery it's still VOD tho
You have done all you could do.
You needed to flash with normal CSC NOT with HOME_CSC to change the CSC.
Your new CSC is XEU!
It still shows XEU/XEU/VOD because VOD is the original CSC of your phone. This is new for the S8 and could not be changed! But normally you will get OTA updates for your new XEU CSC just fine! And any Vodafone-Apps should also be removed.
So everything is like on Samsung devices debranded bevore - beside that the factory CSC is hard branded inside the phone. But thats just optical. Everything else works like it is an XEU CSC.
maik005 said:
You have done all you could do.
You needed to flash with normal CSC NOT with HOME_CSC to change the CSC.
Your new CSC is XEU!
It still shows XEU/XEU/VOD because VOD is the original CSC of your phone. This is new for the S8 and could not be changed! But normally you will get OTA updates for your new XEU CSC just fine! And any Vodafone-Apps should also be removed.
So everything is like on Samsung devices debranded bevore - beside that the factory CSC is hard branded inside the phone. But thats just optical. Everything else works like it is an XEU CSC.
Click to expand...
Click to collapse
Are you sure about that? In the past if you didnt change properly the CSC after unbranding your phone you werent getting OTA updates anymore, i've read on SamMobile you gotta use Smart Switch using the serial number of a phone you know has that CSC, but i dont know how to find one, no one answered me on here. I'm thinking of going into a store and look at the exhibition one, but im afraid it's not legal to do that.