I've read some Android Forums but I can't seem to get my answers...
I need help updating to 2.3.340
I'm new to rooting and deoxeding my phone so I apologize If I have alot of questions....
I am currently on 2.3.15 , rooted and deoxed. My phone keeps prompting me to updating to 2.3.340.
Questions:
1. Should/Can I allow the update to take place automatically?
2. Will I lose my root access and will my phone not be deoxed?
3. Do I need to revert my phone back to stock then update automatically?
4. Is there a link on how to update to 2.3.340 when you have a rooted phone?
Any help is appreciated, thanks!
I'm also curious. I'm on the 2.2OTA-Rooted and my phone wants me to update.
1. Should/Can I allow the update to take place automatically? NO!!! not while it is as you have it now.
3. Do I need to revert my phone back to stock then update automatically? YES and be sure to uninstall any program related to rooting your phone before reverting to stock.
Kapi187.. Hope you don't mind if I add some questions to your thread... It seems our questions are running along the same lines.
I too have been reading quite a bit about the upgrading process and am trying to figure out a few things.. Likewise, some of them may sound "noobish" but please bare with me...
My understanding is that the 2.3.34 update is available OTA (I am currently running 2.3.15 as well).. Is it necessary to revert to a stock sbf (what does sbf stand for?)?
A breakdown of my current setup:
system version 2.3.15
Android version 2.2
Running JRummy V1.0 Rom
Odexed
rooted (obviously)
clockwork recovery installed (also obvious)
image available from pre-rom condition
How should I go about updating to 2.3.34? Is it necessary/ is there a purpose? What are the advantages to doing so?
I have a friend with a Nexus One and he doesn't need to update any system version so we have been discussing back and forth trying to understand the droid x/verizon system.
All help is greatly appreciated... And hopefully this will help others.
Not at all p3p... ask as many questions as you can... helps me out too..
I too would like to know what .Sbf and the other one stand for... lol I can't remember what it was...
So after we revert back to Stock.. (any link as to where to find the stock file?) Update automatically... then we follow the same procedures to re-root the phone?
purplem3pursuit said:
Kapi187.. Hope you don't mind if I add some questions to your thread... It seems our questions are running along the same lines.
I too have been reading quite a bit about the upgrading process and am trying to figure out a few things.. Likewise, some of them may sound "noobish" but please bare with me...
My understanding is that the 2.3.34 update is available OTA (I am currently running 2.3.15 as well).. Is it necessary to revert to a stock sbf (what does sbf stand for?)?
A breakdown of my current setup:
system version 2.3.15
Android version 2.2
Running JRummy V1.0 Rom
Odexed
rooted (obviously)
clockwork recovery installed (also obvious)
image available from pre-rom condition
How should I go about updating to 2.3.34? Is it necessary/ is there a purpose? What are the advantages to doing so?
I have a friend with a Nexus One and he doesn't need to update any system version so we have been discussing back and forth trying to understand the droid x/verizon system.
All help is greatly appreciated... And hopefully this will help others.
Click to expand...
Click to collapse
Hey wassup man? No ban stick here??
I also have the same questions...
m3n00b said:
Hey wassup man? No ban stick here??
I also have the same questions...
Click to expand...
Click to collapse
Nice to see great minds thinking alike The ban stick will rise again..
Bump to top to help myself and OP.
Any help is greatly appreciated.
Kapi187 said:
I've read some Android Forums but I can't seem to get my answers...
I need help updating to 2.3.340
I'm new to rooting and deoxeding my phone so I apologize If I have alot of questions....
I am currently on 2.3.15 , rooted and deoxed. My phone keeps prompting me to updating to 2.3.340.
Questions:
1. Should/Can I allow the update to take place automatically?
2. Will I lose my root access and will my phone not be deoxed?
3. Do I need to revert my phone back to stock then update automatically?
4. Is there a link on how to update to 2.3.340 when you have a rooted phone?
Any help is appreciated, thanks!
Click to expand...
Click to collapse
What I would do is SBF using the full .320 file and then do the .340 system only SBF and you will be on the most current version. Then download z4root its a one click root app which will give you root obviously. Then customize your phone to your liking.
joebob296 said:
What I would do is SBF using the full .320 file and then do the .340 system only SBF and you will be on the most current version. Then download z4root its a one click root app which will give you root obviously. Then customize your phone to your liking.
Click to expand...
Click to collapse
Um - if you are running 2.3.15 I would not recommend doing the sbf with the .320 file. I am just trying to be helpful -not a butt.
I would use the full sbf released for 2.3.15 which can be found at...
http://rootzwiki.com/index.php/Main-Page/Droid-X-Full-2.2-SBF.html
I just posted the guide I used to sbf here for another member...
http://forum.xda-developers.com/showthread.php?t=901934
Here is my understanding of your situation. You are getting prompted for the update. I THINK that even if you said yes and tried to run it - that you would just end up with an error - because the update checks your system to see if all the proper files are there and if they are not it will not run. I think.
So I think the best thing to do is sbf then take the update. You will loose root. and you will not be de-odexed. You will have to reroot. But like the other member said - get z4root (link in the other thread with the sbf instructions) and run it after you do the over the air.
I make no guarantees. Just sharing to the best of my knowledge.
thepolishguy said:
Um - if you are running 2.3.15 I would not recommend doing the sbf with the .320 file. I am just trying to be helpful -not a butt.
Click to expand...
Click to collapse
Flashing the .320 full SBF then the sys only .340 SBF would be the same as the .15 SBF to OTA. Six of one, half a dozen of the other.
purplem3pursuit said:
Kapi187.. Hope you don't mind if I add some questions to your thread... It seems our questions are running along the same lines.
I too have been reading quite a bit about the upgrading process and am trying to figure out a few things.. Likewise, some of them may sound "noobish" but please bare with me...
My understanding is that the 2.3.34 update is available OTA (I am currently running 2.3.15 as well).. Is it necessary to revert to a stock sbf (what does sbf stand for?)?
A breakdown of my current setup:
system version 2.3.15
Android version 2.2
Running JRummy V1.0 Rom
Odexed
rooted (obviously)
clockwork recovery installed (also obvious)
image available from pre-rom condition
How should I go about updating to 2.3.34? Is it necessary/ is there a purpose? What are the advantages to doing so?
I have a friend with a Nexus One and he doesn't need to update any system version so we have been discussing back and forth trying to understand the droid x/verizon system.
All help is greatly appreciated... And hopefully this will help others.
Click to expand...
Click to collapse
SBF stands for SmartBroker Data File, but that doesn't matter, it's simply a backup file. It's not necessary to upgrade to .340 unless you use custom ROMs, because anything made for .320/.340 isn't compatible with .15. The Nexus One doesn't have a system version because it's pure android; the android version is the system version. Other phones have a separate system version because the carriers feel the need to bog the phone down with bloatware and their custom launchers.
SBF files can be found here, and make sure you make a backup immediately after you're re-rooted, so you can just restore it to accept the next OTA.
mlclm said:
Flashing the .320 full SBF then the sys only .340 SBF would be the same as the .15 SBF to OTA. Six of one, half a dozen of the other.
SBF stands for SmartBroker Data File, but that doesn't matter, it's simply a backup file. It's not necessary to upgrade to .340 unless you use custom ROMs, because anything made for .320/.340 isn't compatible with .15. The Nexus One doesn't have a system version because it's pure android; the android version is the system version. Other phones have a separate system version because the carriers feel the need to bog the phone down with bloatware and their custom launchers.
SBF files can be found, and make sure you make a backup immediately after you're re-rooted, so you can just restore it to accept the next OTA.
Click to expand...
Click to collapse
Excellent information! So when utilizing my own backup (or the SBFs presented above), do I need to uninstall clockwork or root before going after the OTA? I am figuring the OTA isn't looking for that information but want to avoid the infamous brick situation at all costs.
No, you can leave everything installed. An SBF is similar to the factory reset disc that comes with computers; it formats everything and then installs the OS on a clean slate. An OTA won't check for root, but it does check for the bloatware. If any of it is missing/renamed, it won't install the update.
Related
I'm completely new to a Droid X. I don't have Verizon, I just use WiFi, so no OTA.
I'm currently on Version.1.13.516.MB810.Verizon.en.US
How would I go about manually upgrading to Froyo? I understand rooting and whatnot. Where can I get a zip?
Anderdroid said:
I'm completely new to a Droid X. I don't have Verizon, I just use WiFi, so no OTA.
I'm currently on Version.1.13.516.MB810.Verizon.en.US
How would I go about manually upgrading to Froyo? I understand rooting and whatnot. Where can I get a zip?
Click to expand...
Click to collapse
http://rootzwiki.com/index.php/Main-Page/Droid-X-Full-2.2-SBF.html
How do I install an SBF with RSD Lite? Does it require root? Any tutorials you can recommend? Bricked my G1 before when looking for tutorials myself lmao.
If you don't want to use RSD, you may want to try this route:
http://forum.xda-developers.com/showthread.php?t=758907
This puts you on the leaked Froyo files (The last 2.3.15 leak is the same as the OTA Froyo update, just a slightly different boot loader and radio)
Many of us stayed on the Leaked version (I did) because the 2.2 SBF wasn't available until just a couple of days ago.
The issue with that method for me won't work is because I'm not on .604 I'm on .516
Anderdroid said:
The issue with that method for me won't work is because I'm not on .604 I'm on .516
Click to expand...
Click to collapse
I think the link for .604 is there as well.
Spend a little time digging through the older posts int he dev section. Everything you need is in there.
Alright I figured it all out thanks ! On Froyo now
I am in between going to GB and staying where I am at.
My issue is that I am on a version of 2.2.1 Stock that I obtained through TBH around the holidays....file was literally called "happy holidays from TBH" however, this was the 2.3.320 version of the OTA update, not the 2.3.340 version that everyone seems to have.
So the real question is, can I jump straight from 2.3.320 to GB? OR do I need to flash to 2.3.34 since when I check for OTA updates the phone tells me that I am currently up to date.
If I flash to 2.3.34, then I should probably just go straight to gingerbread rooted. However, how would I get the OTA gingerbread when it comes out? Otherwise I would be right back where I am now in about a month or so.
I need to either update to the current froyo and wait for the OTA release of GB, or update to current froyo (2.2.34) and then update again to the new rooted 2.3.3? Right? can someone confirm?
PS. I already have the 2.3.340 .sbf file (445MB) and the 2.3.3 rooted file from p3droid so I am good to go there if necessary.
if you have the 2.3.340 sbf go ahead and flash it first just to be sure...then gingerbread the whole process will only take u 30 minutes its really not that big of a deal
I might as well go ahead and update to 2.3.340 however, I am now seeing on droidxforums that there is another version of 2.3.340 called maderstcok...can't post a link but here is a partial url: droidxforums.com/forum/droid-x-hacks/15666-maderstcok-ota-2-3-340-update-zip.html
The one that I have is from xda via the noobs guide (links to mydroidworld), so I trust that one more... however, this file is an update.zip, not an .sbf. So it could potentially be easier to do?
I would also like to know if it makes any difference if I use the 4.8 version of RSD lite versus 4.9
I am currently using the 4.7.1 drivers as well, pretty sure that that is right, but if there is a newer version, let me know
bump, just want a second opinion
Maderstckok will get you to where you need to be (2.3.340) I've used it 10+ times it's a great file. Then reboot, reroot, and flash GB.
SOCOM-HERO said:
I would also like to know if it makes any difference if I use the 4.8 version of RSD lite versus 4.9
I am currently using the 4.7.1 drivers as well, pretty sure that that is right, but if there is a newer version, let me know
Click to expand...
Click to collapse
I used 4.8. It'll work fine.
Sent from my DROIDX using XDA App
Ditto - 4.8 worked like a charm.
thanks guys, downloading now and will update to 2.3.34, gonna check around for some more ideas on whether or not to go ahead and get GB or wait for the OTA...i have seen some threads with issues with wireless tether, which is one of my reasons for rooting in the first place
so far so good, rooted with z4 after updating to 2.3.34 with maderstock....awesome file, best experience yet with the clockworkmod going to stock. Will update to GB tomorrow. Some of the deodexed roms look really good!
done...on GB, added the deodexed and got the stock BWC theme which is working great. Will maybe flash more custom roms later as they become more mature for GB. otherwise, freezing bulr apps.
US Verizon Droid X running Froyo
Rooted last year using z4root.
Now I want OTA Gingerbread.
unrooted using z4root.
Check for updates. Download. Reboot. Shows Android unpacking animation, then yellow !. Reboots into Froyo. Update failed.
I have never frozen anything. I'm going to try setting keyboard back to stock (update: update still fails). Do I need to uninstall any root apps (Wireless Tether, Titanium Backup, Swype beta, AdFree, Webkey)?
I don't want to do a factory restore if possible.
=====================
System version
Version.2.3.340.MB810.Verizon.en.US
Model number
DROIDX
Android version
2.2.1
Baseband version
BP_C_01.09.07P
Kernel version
2.6.32.9-g55626e1
[email protected] #1
Build number
VZW
ERI version
5
PRL version
52644
The files are more than likely still there from when you rooted.
Backup the thing you need (not including system data) and SBF back to 2.3.34.
From there you SHOULD be able to restore your backed up things, or you can take the OTA then restore.
WARNING: If you take the OTA it may take you to .621 which I DONT recommend. You shoud probably just SBF to .602, reroot, and stay there.
Sent from my DROIDX using Tapatalk
Thanks!
I found this guide to SBF from 2010... is there a more current process you recommend?
droidforums.net/forum/droid-x-rooted-help/100038-complete-droid-x-sbf-flashing-guide.html
Can you explain a little bit why not go to .621?
HighTechGeek said:
Thanks!
I found this guide to SBF from 2010... is there a more current process you recommend?
droidforums.net/forum/droid-x-rooted-help/100038-complete-droid-x-sbf-flashing-guide.html
Can you explain a little bit why not go to .621?
Click to expand...
Click to collapse
You can't flash any roms or root from .621. And it is impossible to downgrade from .621 to any other firmware.
Sent from my DROIDX using Tapatalk
Can you point me to a current step by step guide of how to SBF to .602?
From what I've read in the 2010 posts, it seems pretty advanced and didn't always work. Maybe it's been streamlined by now?
infazzdar said:
You can't flash any roms or root from .621. And it is impossible to downgrade from .621 to any other firmware.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
He could SBF to .602, run OTA Rootkeeper, then take the .621 update.
Andy
AndreXX said:
He could SBF to .602, run OTA Rootkeeper, then take the .621 update.
Andy
Click to expand...
Click to collapse
yes but thenwhat if while flashing roms he happens to bootloop... then it is sbf to .621 and no more root. The general consensus is to avoid .621 like the plague until an exploit is discovered.
Thanks everyone. I think I'll try SBF to .602. I found a video tutorial here:
youtube.com/v/QkYsD4w8rHg
I'm still not sure why I can't get the OTA .605. It downlaods and reboots, but keeps failing to install. Otherwise, my phone is relatively fine (currently on Froyo). I am having trouble getting root back since I removed root (used z4root). I just wanted to backup some things before going to .602
Hello XDA, it has been a very long time since I have upgraded my droid x, and I have decided to finally take action.
I am currently running an old build of Liberty Mod that I installed a very long time ago for Android 2.2.1.
I have heard negative things about the newest update, so I was just wondering where I should find the correct update file for upgrading to the current rootable OTA and installing cyanogen.
All help is appreciated.
I was in a similar situation myself so I might've able to help. What I did was sbf to 2.2 (not sure of the sbf file name) then took the OTAs till I got to .605 (this was before the .621 was in soak test). Then I rooted and flashed cm. now since the .621 OTA is live you will have to be careful. I would suggest doing what I did except watch the name of the OTA VERY CAREFULLY. If you get prompted for the .621 do not take it as it is unrootable currently. I can get you links later when I'm at my computer if needed.
twisted_58 said:
I was in a similar situation myself so I might've able to help. What I did was sbf to 2.2 (not sure of the sbf file name) then took the OTAs till I got to .605 (this was before the .621 was in soak test). Then I rooted and flashed cm. now since the .621 OTA is live you will have to be careful. I would suggest doing what I did except watch the name of the OTA VERY CAREFULLY. If you get prompted for the .621 do not take it as it is unrootable currently. I can get you links later when I'm at my computer if needed.
Click to expand...
Click to collapse
Thank you for the response. I see what you did worked, but I also found an interesting post on rootzwiki that would imply all you have to do is wipe, install the .605 AIO and then install the current CM4DX-GB. Should I just follow that guide?
Upgrading to .605 is really unnecessary. You can flash all Gingerbread and ICS roms from .602.
You just need to SBF to .602. From there you will be able to root and install CyanogenMod.
Sent from my DROIDX using Tapatalk
infazzdar said:
Upgrading to .605 is really unnecessary. You can flash all Gingerbread and ICS roms from .602.
You just need to SBF to .602. From there you will be able to root and install CyanogenMod.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
Thank you for your response. I went ahead and formatted, installed the team black hat .605 AIO, and then wiped again and installed cm4dx-gb. I'm really loving CM7 and Gingerbread. Thank you very much for all of the responses. This thread can be closed now.
Hi my friend's droid x was on a leaked version of gingerbread (4.5.588) and since it's been incredibly buggy I convinced him to try to update it to the latest version. Being a leak, obviously system updates won't work.
I found this file online of the .zip: http://dl.dropbox.com/u/60354155/Blur_Version.4.5.621.MB810.Verizon.en.US.zip
The thing is it's only 15 MB, which makes me a little hesitant if it's a good .zip
If not, could anyone direct me to the official .621 update.zip? Thanks.
Edit: Actually, does someone have a link to the .602 official update? I can't find it anywhere online since a lot of the links were removed or on megaupload.
Actually, you should probably SBF to .602.
It will make sure that your phone won't have any leftover files after upgrading, and will ensure optimum perforemence.
Just Google "1kds 602 Linux SBF" and it should lead you to the files and instructions you need.
One last thing, instead of upgrading to .621, you should stay on .602, root, and flash one of the many great roms available.
Sent from my DROIDX using Tapatalk
infazzdar said:
Actually, you should probably SBF to .602.
It will make sure that your phone won't have any leftover files after upgrading, and will ensure optimum perforemence.
Just Google "1kds 602 Linux SBF" and it should lead you to the files and instructions you need.
One last thing, instead of upgrading to .621, you should stay on .602, root, and flash one of the many great roms available.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
Well I'm updating him to .596 right now. Will that allow system updates since that's official?