Database Users

flashing an SPL on a rooted 32B

Hi,
after reading through all manuals I still have this question.
I own a dutch (one click) rooted vodafone Magic:
PVT 32B CCHP S-on G
Hboot 1.33.0004
Radio 2.22.23.02
RA-sapphire-v1.6.2G
I would like to get rid of te first vodafone bootscreen. I understand that I first have to flash an engineerd SPL. (I'm not allowed to flash a bootscreen with 1.33.0004)
1) Am I correct that I should flash: Engineering SPL 1.33.2005 (or do I need another version)
2) I do this by using "Flash zip from sdcard" in RA recovery
3) Is there a risk of bricking my phone this way
Anything I missed??
Thanks a lot for your help
Eric

Since you have the newest radio you shouldn't brick your phone. Before people used to brick their phones because they didn't have the latest radio for G1's. as long as you have your radio, or the other one ending with I, you should be fine.

Thank you
Flashed it and it works. (didnt have wifi or connection afterwards, but reinstalling a rom fixed that.

Magic32A Unable to install CM5.0.7 Help!

This is repost from another thread(i'm unable to link it yet)
Hi,
my phone was:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32
so i finally decided to try a new rom, i was still using android 1.5 that came from factory, after severals hours of reading in this forum i decided to use CM 5.0.7, i followed "[Rom][32a][32b][3.22] CyanogenMod 5.0.7-Stable Eclair 2.1 (05/31/2010) Mod Revision-2" thread instructions and used Radio Switcher v2.1.
Everything worked fine, now i have:
SAPPHIRE PVT 32A ENG SHIP S-OFF H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
RADIO-6.35.10.10
Aug 21 2009,18:19:15
and recovery RA-hero-v1.6.2
after this i tryed flashing CM 5.0.7 with this recovery and i got "getprop" error
so i decided to install CursorSense32 ROM
It worked, all was fine, but i was still using android 1.5.
so i tryed using this tutorial from cyanoMod wiki: Upgrading from CM or other rooted roms - Magic32A Firmware to CyanogenMod
i flashed HTC_ADP_1.6_DRC83_rooted_base.zip using the same recovery, but when i tryed flashing CM 5.0.7 i get the "getprop" error.
I can't use RA-shappire.1.7.0 or any previous version, probably due to the fact that i´m using SPL 1.76
So now i´m stuck, my phone wont boot after Vodafone logo.
Can someone please help me?
Thanks in advanced
Update:
I was able to fastboot recovery-RA-Magic32A-6.35-v1.5.2.img
then i Wiped,
next i applied Zip: HTC_ADP_1.6_DRC83_rooted_base.zip,
then CM5.0.7-32a-blk-r2.zip
and lastly bc-5.0.7-ebi1-signed.zip
reboot and nothing has changed
Update:
It seems i flashed with radio wrong when i should have stay put.
.....
i reverted back with radio switcher.
flashed with CM5.0.7-32a-blk-r2.zip and it worked.
Problem solved.

Won't work..... you just upgraded your radio from 3.22 to a 6.35... CM runs on 3.22. You need to downgrade to 3.22 for CM.
PS: Check the left tag of the topics they often contain the radio version for the rom
ie: [Rom][32a][32b][3.22] CyanogenMod 5.0.7-Stable Eclair 2.1 (05/31/2010) Mod Revision-2

^^^ right there

Please help, rooting and installing custom rom (HTC Magic)

Hy there, i'm completely noob, but I was reading this forum for couple of weeks now. I want to root my device and I found really simple guide on Unlockr.com, rooting magic in one click.
So, is this good guide? And when I root my phone, I'm completely lost between so many things (radio, spl...).
This is my phone, HTC Magic (non-branded):
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009. (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Please tell me what should I do after rooting (if that rooting procedure is ok), what rom can I install to my device, is there something I must do before installing (or after)?
Please help me! Thanks for your time and answers!

I think the guide "rooting magic in one click" on Unlockr.com is for old radio only (correct me if I'm wrong).
Your phone is running on new radio verion, so I think you can't apply that method to root your phone.
You can use this method (thank to agriff):
Download new RUU
http://www.multiupload.com/XQEH9NVGY7
Flash with Goldcard method http://theunlockr.com/2010/03/10/how...te-a-goldcard/
1. Download RUU linked above.
2. Install update using RUU.
3. Turn on phone and connect to computer.
4. Get RA recovery and SPL also linked above and drop them to sdcard root directory.
5. Run SDK: adb shell
6. Install recovery: flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img http://forum.xda-developers.com/showthread.php?t=561124
6. Turn off phone and turn on again holding Power+Home. RA Recovery should appear.
7. Flash zip from sdcard.
8. Use file: update-hboot-1762007-signed
9. Done. PSPL broken.
10. Build a shrine for orange_24
Click to expand...
Click to collapse
Or you can get more detail instruction at: ROOT YOUR HTC MAGIC
After rooted phone, you can install any custom ROM for 32A with new radio like: Smoki, CursorSense32A (these ROM with Sense UI, very nice...)

Mod. edit: not dev related, moved to general

Do I get it right? (Custom ROM on 32B/1.33.0013)

Hey, I need you to confirm if my plan to flash a custom ROM on a friend's HTC Magic will work. I have experience with flashing ROMs and using recovery on my LG phone, but the HTC seems to be a little bit different because of the SPL and Radio things.
The specs of the phone are:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT 1.33.0013 (SAPP10000)
CPLD-10
RADIO-2.22.28.25
Oct 21 2009, 22:33:27
ROM at the moment is official 2.2.1 and was updated the official way.
So, in order to get any custom ROM installed, I follow these steps:
1. root with SuperOneClick
2. install Amon_ra recovery by
a) using ROM Manager from market, or by
b) typing "flash_image recovery sdcard/recovery.img" in terminal app, or by
c) booting into fastboot and write "fastboot flash recovery recovery.img"
3. access recovery (home+power?)
4. wipe everything using the recovery menu
5. use install zip and install the ROM of my choice
(6). install ezterry's Kernel (when is this necessary?)
And another question: do the SPL and Radio I mentioned above use the 15MB extra RAM and so I have to use an appropiate firmware like this: http://forum.xda-developers.com/showthread.php?t=866878 , or is this only possible with the 0013d (I have the 0013, without "d") and 2708 combination?

EazyLuke said:
Hey, I need you to confirm if my plan to flash a custom ROM on a friend's HTC Magic will work. I have experience with flashing ROMs and using recovery on my LG phone, but the HTC seems to be a little bit different because of the SPL and Radio things.
The specs of the phone are:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT 1.33.0013 (SAPP10000)
CPLD-10
RADIO-2.22.28.25
Oct 21 2009, 22:33:27
ROM at the moment is official 2.2.1 and was updated the official way.
So, in order to get any custom ROM installed, I follow these steps:
1. root with SuperOneClick
2. install Amon_ra recovery by
a) using ROM Manager from market, or by
b) typing "flash_image recovery sdcard/recovery.img" in terminal app, or by
c) booting into fastboot and write "fastboot flash recovery recovery.img"
3. access recovery (home+power?)
4. wipe everything using the recovery menu
5. use install zip and install the ROM of my choice
(6). install ezterry's Kernel (when is this necessary?)
And another question: do the SPL and Radio I mentioned above use the 15MB extra RAM and so I have to use an appropiate firmware like this: http://forum.xda-developers.com/showthread.php?t=866878 , or is this only possible with the 0013d (I have the 0013, without "d") and 2708 combination?
Click to expand...
Click to collapse
For the recovery the easiest method is to install with ROM Manager. Flashing from terminal will require you to add the flash_image binary to /system/bin. You can't flash from fastboot since you have a perfected SPL. The other parts of your steps are correct. The 1.33.0013d SPL is the only one that allows for the extra RAM hack so you wont get that benefit unless you change the SPL (which is easily done with the upgrade .zip file provided by ezterry from recovery). Flashing a new kernel is only required if specified by a ROMs dev. The benefit of flashing new kernels is that you can get updated ones that OC more efficiently. Pershoot is about the only kernel dev keeping his work updated for the Magic these days though and even he isn't releasing updates that often. The Magic is unfortunately rapidly becoming an outdated device.
Sent from my HTC Glacier using Tapatalk

EazyLuke said:
And another question: do the SPL and Radio I mentioned above use the 15MB extra RAM and so I have to use an appropiate firmware like this: http://forum.xda-developers.com/showthread.php?t=866878 , or is this only possible with the 0013d (I have the 0013, without "d") and 2708 combination?
Click to expand...
Click to collapse
You do not need 0013d on a 32b sapphire [aka magic] phone 0013 and your current radio will allow you to run the extended 2708+ kernels. Just before flashing a custom rom run SuperWipe.
HOWEVER: If you intend to use CustomMTD or frequently flash roms I highly recommend 1.33.0013d because it has some additional features that will make it easier to fix up the device if you run into problems.
As mentioned just use the update.zip in my 2708+ thread for going from 1.33.0013 to 1.33.0013d
(Such useful features are: fastboot erase -w to erase system. cache, userdata after changing the partition sizes with customMTD if you have issues booting.. not required if you super wipe first but if forgotten will be an easier recovery than the alternative. Also 0013d has a hardSPL feature of allowing to flash NBH files from any region thus you are less likely to need to find a gold card to flash one if you phone stops booting into anything but the bootloader.)
Note Dream users almost always *must* use 1.33.0013d as otherwise they are on the stock partition size and will not be able to install most modern roms.. Its possible to use CustomMTD to get around this.. but as mentioned 1.33.0013d has a better feature set for use with CustomMTD as well as mis-flashed recoveries regardless of CustomMTD use.

EDIT: okay, thanks to both of you! So I'll flash recovery, wipe, flash 13d (for more security & features), keep Radio, flash ROM.

ezterry said:
You do not need 0013d on a 32b sapphire [aka magic] phone 0013 and your current radio will allow you to run the extended 2708+ kernels. Just before flashing a custom rom run SuperWipe.
HOWEVER: If you intend to use CustomMTD or frequently flash roms I highly recommend 1.33.0013d because it has some additional features that will make it easier to fix up the device if you run into problems.
As mentioned just use the update.zip in my 2708+ thread for going from 1.33.0013 to 1.33.0013d
(Such useful features are: fastboot erase -w to erase system. cache, userdata after changing the partition sizes with customMTD if you have issues booting.. not required if you super wipe first but if forgotten will be an easier recovery than the alternative. Also 0013d has a hardSPL feature of allowing to flash NBH files from any region thus you are less likely to need to find a gold card to flash one if you phone stops booting into anything but the bootloader.)
Note Dream users almost always *must* use 1.33.0013d as otherwise they are on the stock partition size and will not be able to install most modern roms.. Its possible to use CustomMTD to get around this.. but as mentioned 1.33.0013d has a better feature set for use with CustomMTD as well as mis-flashed recoveries regardless of CustomMTD use.
Click to expand...
Click to collapse
Nice to know. I, for some reason, was under the impression the RAM hack was tied to your custom SPL.
@OP, wipe after upgrading to 13d.
Sent from my HTC Glacier using Tapatalk

DonJuan692006 said:
Nice to know. I, for some reason, was under the impression the RAM hack was tied to your custom SPL.
Click to expand...
Click to collapse
No its related to 1.33.0013 allowing alternative base addresses in the boot.img.. (well and the 2708+ radio giving a little more ram to linux). The memory hack was based off the sapphire ota kernel.
1.33.0013d was a hack to make supporting/using the spl on the dream less of a nightmare. (Along with the rest of the material posted on the 2708+ thread). In short how to deliver it such to avoid the pile of bricks as generated by dangerSPL now that we know better.

15MB extra RAM for ht-03a using T-Mobile bootloader and radio

Posted by SBS
I flashed the new SPL and radio that also came with the T-Mobile Froyo OTA giving myself an extra 15 MB of RAM. This post attempts to compile the background and links to the knowledge needed to do this safely. Because this is much more complicated than rooting with universal androot, and you can very easily brick your phone, this should not be done if you don't fully understand the process and aren't comfortable using the command line. While I believe someone may have created flashable signed zips for doing this, the recommended way is to use fastboot.
The Benefits
ROM Memory Swap Total (KB) Total (MB)
Stock
97708
0
97708
95
Rooted old SPL/radio
97708
31316
129024
126
Rooted new SPL/radio
112844
31316
144160
141
Without swap, that is an additional 14.8 MB of real memory.
First, a few things you need to know before proceeding:
Perfect Secondary Program Loader
The ht-03a shipped with a "perfect" SPL that does not allow remote fastboot. Therefore, an interim engineering SPL will have to be flashed in order to use fastboot to flash the new SPL (1.33.0013) and radio. The new SPL is also perfect, but a version was modified for the Dream/G1 (1.33.0013d) that allows a few fastboot commands, such as fasboot erase system -w for a complete wipe. Fortunately, 1.33.0013d has been confirmed to also work on the ht-03a, a Google-branded 32B magic.
Even with the modified "d" version of the new SPL, you cannot remote boot a recovery image, flash new splash screens, flash a new recovery image (if for example yours became corrupted). You will have to flash an engineering SPL, do what you must, then reflash 1.33.0013d. Unlike flashing ROMs, flashing SPLs is not 100% risk free.
Amon_RA Recovery Recommended
I'm sure this will probably get some feathers ruffled, but I am leery of clockwork recovery and ROM Manager. As outlined here, this is not the developer's fault but a low memory issue. Perhaps this new SPL and radio will fix that, but the fact remains that there have been a number of instances Dream and Magic users getting stuck with no working recovery. With an Engineering SPL, this is no problem because fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img fixes this, but with a perfect SPL, it will be much more difficult, as in making a goldcard difficult.
Another fact is that I have yet to hear of this ever happening with Amon_RA's recovery, and ezterry at XDA is suggesting to use Amon_RA. However, using Amon_RA means you can't use ROM Manager.
(NOTE: ht-03a users need "G" versions of Amon_RA)
Patched Kernel Required
If you are like me, you never cared about kernels. Yeah, you might have been interested in testing out some of the overclocked kernels but you were perfectly happy to use whatever the developers included with the ROM, which will likely be the most stable way to go but maybe not the fastest. Stability versus bleeding edge. For the time being, those days will be over. All of the cooked ROMs available right now will need a patched kernel that may or may not be included with the ROM.
I have no idea what is the "best" kernel. It will depend on what makes it the best for you.
Required Reading
Start with ezterry's XDA write up with links to the radio and SPL. If this doesn't make sense, stop and read more.
If you don't already have one, read the instructions on flashing an engineering SPL.
The SPL in the above link comes from this list of engineering SPLs.
Finally, you'll want to understand how to flash Amon_RA's recovery because it is less prone to problems than clockwork.
If you plan to use CM 6.1, ezterry's CM Forum post contains a port with the new radio.
Required Environment
Engineering SPL (I am using 1.33.2005. Many others are using 1.33.2009. IIRC, there might be issues with 1.33.2010 and CM, so 2009 is probably best.)
fastboot utility installed on your PC
Android SDK on your PC to allow you to use ADB (Perhaps this is technically not required but at this point of getting into your phone you ought to have it installed.)
What I did
The T-Mobile US Froyo OTA with a cyanogen kernel I've been running lately is by far my favorite ROM due to speed and stability. I've mentioned missing some CyanogenMod features, but when it comes to my phone, stability trumps the bleeding edge. So I 1) did a nandroid backup of my current ROM, 2) updated the SPL and radio, 3) restored the backup, 4) flashed the patched kernel, and 5) picked up where I left off with no loss of data on my phone. The actual work involved for me was about 10 minutes because I already had an engineering SPL and Amon_RA. I spent infinitely more time writing about this than I did actually experiencing it.
So far, all seems fine, but I'll need a bit of time to test. Wifi and GPS are working, and the phone does seem snappier. I haven't had a chance to see how battery life is. There are two choices of radio, 2.22.27.08 or 2.22.28.25. The former came with the OTA. The later is a newer radio. Depends on who you ask and where they live, which is better/faster/easier on the battery. For now I am using 2.22.27.08.
Rebooted to recovery and nandroid backup my current ROM.
Followed ezterry's instructions on XDA
Downloaded all necessary files and checked the MD5 sums against what was published.
dream_2708kit.zip which includes 2.22.27.08 radio and 1.33.0013d SPL
Kernel installer for CM Nightly 271
Mounted my SD card, copied the kernel installer to the root of my SD Card, and rechecked the md5 sum.
fastboot flash radio radio-2.22.27.08.img
fastboot flash hboot hboot-1.33.0013d.img
fastboot reboot-bootloader
fastboot erase system -w
fastboot erase boot
Reboot to recovery and restore ROM.
Flash kernel.
Reboot normally.
Pray (actually I used ddms watch all the boot messages)
Play.
New v Old SPL/Radio
HBOOT Radio Context Type Security SPL Maker Fastboot USB
1.33.0006 2.22.19.26I
Stock
Shipping
On
Google
No
1.33.2005 2.22.19.26I
My choice
Engineering
Off
HTC
Yes
1.33.0013d 2.22.27.08
Froyo OTA
Shipping
On
Google
No*
*fastboot erase allowed
Here are the hboot/radio combinations I've had on my ht-03a, beginning with the Docomo stock configuration. After that I used the same radio with an engineering SPL. This was prior to universal androot with no one-click option for 1.6 Donut; An engineering SPL was required to root. Finally, I'm back to a mostly perfect SPL but with an additional 15 MB of real memory.
What most of you will need to do
NOT follow these steps but use them as A Docomo ht-03a SPECIFIC REFERENCE for ezterry's instructions.
If you are unrooted, root your phone and flash a custom recovery. clockwork is fine to start with.
Download and flash an engineering SPL from recovery (e.g., 1.33.2009, though I have been using 1.33.2005). VERIFY MD5 SUM after download and after copying to SD card.
Reboot to fastboot (power + back).
Download Amon_RA recovery (NOTE: that the code in exterry's guide is specific to a dream ht-03a users need a sapphire recovery tagged "G". "cyan" refers to the color scheme, not cyanogen.) VERIFY MD5 SUM!
Using the terminal, cd to the directory with the img file and fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img which assumes you have added fastboot to your path (Instructions for mac/linux here. Windows users on their own.)
Continue as I did.
Restore your previous ROM and flash the "2708" ported kernel of you choice.
Or follow these directions for CM 6.1 after rebooting to recovery.