Hi.
It all happend when i wanted to replace the libwebcore.so file in the /system/lib.
So i did it. but its properly the wrong libwebore.
so i restarted the phone, but now, its stuck at the tattoo screen.
I can connect it to the computer. adb can see it. but i cant su neither mount which requires su.
It's the custom rom. i have no recovery image installed.
i CAN access fastboot AND recovery mode
I tried flashing a rom via HBoot by renaming the rom to CLICIMG.zip. but it doesnt work. phone says no image or wrong format.
Any suggestions?
Well, this really sucks
Now i cant even access adb. I pressed home+back key to reset the phone.
now its just stuck on the tattoo screen like just before but adb devices dont see anything.
Pleassee someone? i really need help on this one!
Hboot doesnt seem to help much. it cant detect anything. i had 3 files on the sdcard (all is amon_ra), just named differently: CLICDIAG.zip, CLICIMG.zip and CLICIMG.nbh
but it doesnt do anything :'(
Do you have a backup?
Have you tried to install recovery img via adb? If you can do this you can just do a backup of your current rom, try somehow to get your sd-card seen by the computer and copy the files of your old backup files to your new backup, asked to replace select yes.( I used a different phone to copy my backup files to the sd card when I couldn't get past startup screen.)
Good luck.
XabdullahX said:
Well, this really sucks
Now i cant even access adb. I pressed home+back key to reset the phone.
now its just stuck on the tattoo screen like just before but adb devices dont see anything.
Pleassee someone? i really need help on this one!
Hboot doesnt seem to help much. it cant detect anything. i had 3 files on the sdcard (all is amon_ra), just named differently: CLICDIAG.zip, CLICIMG.zip and CLICIMG.nbh
but it doesnt do anything :'(
Click to expand...
Click to collapse
Where you found these files?
To flash the rom from hboot you need the rom.zip file of your stock rom(renamed as CLICIMG.zip)
I have the same problem! stuck on "Tattoo" screen and boot again and again.
I have the goldcard with CLICIMG.zip and it loads on HBOOT and install all (boot,radio,recovery,etc.. ) but when it ends, returns to the same....
HELP PLEASEEE!!!
Do you have Amon_Ra or Clockworkmod recovery installed? If so you can try wiping the Dalvik cache and try rebooting. Most boot loops I had were resolved this way. Wiping data and cache totally might also help.
If you can access adb and device is rooted, you should be able to use "adb shell" command and have a rooted terminal with the "#" sign after running su. In that case you can also manually wipe Dalvik cache by deleting everything under /data/dalvik-cache/
$su
#cd /data/dalvik-cache
#rm *
#exit
$exit
Click to expand...
Click to collapse
Good luck!
tihe problem is that i can´t access to the phone by adb
i put "adb shell" and it says: "error: device not found"
the phone screen shows a phone and triangle with exclamation
Related
I've been reading up about what to do after I tried to "factory reset" my phone and then was stuck at the htc start up soon, which kept looping.
I've been trying to load recovery.img during fastboot (back+power) and then to apply update.zip during recovery (home+power).
However, the problem is that during fastboot, the device isn't recognized (when I go to adb devices on command prompt, no device is listed). I know that my drivers are good bc the device is found when I start up in the recovery mode. I tried to skip the part where I load recovery.img (since when I try to do that, it tells me that it can't be loaded), and to go straight to apply update.zip, but then the phone tells me that update.zip is either bad or can't be mounted.
I have a Rogers Magic (32A). I am a complete newbie, so any help would be greatly appreciated. I should also say that before I tried to do the factor reset, the phone was on the hero rom loaded by a previous user.
try this:
boot in recovery:
fastboot boot recovery.img
then, push update.zip on your sd card ( need a good rom in the tools folder on your computer)
adb shell mount /sdcard
adb push update.zip /sdcard
and apply update.zip with the recovery menu.
thanks for your reply, but it didn't work:
first, it said "cannot load recovery.img"
and then when I tried to mount, it said "mount: mounting dev/block/mmcblk0p1 on /sdcard failed: Device or resource busy"
replace recovery to correct path to your recovery image. (your phone mut be in fastboot mode power with back button pressed)
ex:
fastboot boot c:\sdk\tools\recovery-RAv1.2.1G.img
then your phone must boot on recovery and you could push update.zip
thanks so much. I figued it out - just a simple problem of the update.zip file being corrupt.
pato17 said:
thanks so much. I figued it out - just a simple problem of the update.zip file being corrupt.
Click to expand...
Click to collapse
i am having the same issues.
any help?
beastmods said:
i am having the same issues.
any help?
Click to expand...
Click to collapse
What exactly have you tried to do?
Sent from my HTC Magic using XDA App
Hi. My magic is having the same issues. Although I believe it is my own doing. I was going to create a gold card and I flashed the sappimg.zip, I can boot the phone into fastboot but it us not seen, when I run the fast boot command it just says waiting on device..
I can boot the phone up normally but it does not want to connect to the market our link my gmail account to it..
All to jailbreak... Any ideas?
Edit....
I must have had a poor internet connection last night. I have got the market working.
Sent from my GT-I9000 using Tapatalk
I am having the same problem.
I have a 32b on vodafone uk.
all the device adb drivers have installed fine. I have tried this on both my laptop and desktop (win 7) and when the phone is turned on - it shows fine under adb devices.
When i boot to fastboot, the phone doesnt show, and therefore i cannot load a custom rom.
Trying to root the phone I have so far used the goldcard method to downgrade to get back to 1.5, if i try to flash the recovery img from the phone (using flash rec) then when i boot to recovery (home+power) it hangs on the vodafone screen - this is why i wont to flash from fastboot.
any ideas?
Thanks
phone rooted?
FlashRec is out of date, I'm pretty sure. Is your phone rooted already, or are you at stock?
I flashed with the latest cyanogen on a 32A in CM's recovery image, i had the patch for the kernel (take it from 32B to 32A) but i didnt get to apply it yet.
when i rebooted my phone it hangs on the Rogers screen, i can get to fastboot and recovery mode (stock recovery mode). I made a nandroid backup (before the flash) but i cant get to it from the recovery mode menu, and when i connect the fastboot usb, my sd card doesnt show up on my computer. so i cant run the fastboot command to load the recovery image...
is there anything i can do?
some more information:
when i go into recovery mode, the "removable disk" shows up in my computer, but clicking on it just says "please insert a disc into drive..." which leads me to believe it is not mounted, any way to do this from recovery?
It'll never boot when you haven't installed the 32A patch.
And that means that you'll never be able to mount the SD card to have it show up in Windows. You can use adb to push the update.zip file to your SD card while in Recovery mode.
(You'll need the Android SDK installed for this)
Start up your phone in Recovery mode using the Power+Home buttons.
Once in recovery, wait for Windows to detect the phone (about 30 seconds).
Copy the 32A patch to your Android SDK tools folder, then run:
Code:
adb push <filename for your 32A patch>.zip /sdcard/update.zip
This will push your 32A patch to your SD card as update.zip.
Then apply update.zip through your Recovery environment.
A note to you... Before running the adb push, try running:
Code:
adb shell
mount /sdcard
exit
adb push <filename for your 32A patch>.zip /sdcard/update.zip
This will make sure that your SD card is properly mounted before copying the file to it.
To check that the file is there before trying to update, run this from your Command Prompt.
Code:
adb shell
cd /sdcard
ls | grep update.zip
You should see update.zip listed there.
After you've applied the 32A patch zip file through your Recovery environment, reboot your phone.
Should work now...
If you haven't installed the Amon_RA Recovery yet, it would be a good idea. It lets you save and update zip file to the root of your SD card without renaming it to update.zip first. You can apply any update zip file as an update.
thanks for the reply,
when i type adb shell i get:
"error: device not found"
typing adb devices also yields that the device is not listed
but windows does make the noise notifying that a device is connected, and the Removable disc still comes up in my computer
when i go into Device Manager, under disc drives it shows up as
HTC Android Phone Usb Device when the phone is in recovery
and if this makes any difference, press home+power again and look at the options in recovery the bottom says "E:Can't open /cache/recovery/command"
it worked in fastboot/recovery before, but that was when i had USB debugging selected and before i flashed CM i wiped. could this be the reason why im not able to access the phone with adb in recovery/fastboot?
for some reason i was able to fastboot into cm's recovery image and then the device was listed in adb, i followed your instructions and applied the patch, the phone booted up!
thank you!!!!! phew, that was a close one
zeotrope said:
for some reason i was able to fastboot into cm's recovery image and then the device was listed in adb, i followed your instructions and applied the patch, the phone booted up!
thank you!!!!! phew, that was a close one
Click to expand...
Click to collapse
The CM recovery works great but without a hardware keyboard it's not entirely functional.
I'd recommend flashing Amon_Ra recovery and using that. Read the directions carefully though. Make sure you use the right one for your phone.
got amon-ra's recovery permanently flashed on there, thanks again for your help
So I successfully downgraded back to Froyo. I followed the Rooting process exactly, mdr #'s 2 and 3 matched. I entered the reboot command, and now my phone only vibrates 3-4 times when you turn it on. the led keeps flashing. and nothing is happening with the screen. I cant get it to the bootloader screen either
is it being recognized through adb?
Sent from my HTC Glacier using xda premium
No, adb is not recognizing it.
Nvmd. I just got adb to recognize it. when i enter adb devices it returns...
SH0B5T600504 Recovery.
what can i do from here?
TurboBrickMike said:
Nvmd. I just got adb to recognize it. when i enter adb devices it returns...
SH0B5T600504 Recovery.
what can i do from here?
Click to expand...
Click to collapse
adb reboot recovery
THEindian said:
adb reboot recovery
Click to expand...
Click to collapse
Ok , so I open up adb. enter in adb reboot recovery, then it should be ok to work with after that? Sorry for being so inexperienced at this. I'm just a car guy who has been geeking on his android lol.
THEindian said:
adb reboot recovery
Click to expand...
Click to collapse
Ok, so i tried adb reboot recovery... Same thing, just 4-5 vibrations and flashing amber LED. What is my next option?
I can now get into the bootloader and Clockwork. but now it just gets stuck on the Clockwork mod loading screen when i update .zip file from sd. I tried the factory reset, nothing. It shows S-Off though lol. Is there any info that I can give you guys from the menus I have available in order to help decode what I did wrong/what went wrong?
Try this...Take the original 2.3.4 update and put it in your sd card.(assuming your pc detects the sd card). Take the battery out if the phone for about 10 min. try to boot into hboot and reflash the phone back to stock. Then redowngrade and root again.
Sorry if I'm not too much help. I'm learning from what I read here and there.
Sent from my Dark Unicorn Resurrected v.1 using xda premium
Brick
TurboBrickMike said:
I can now get into the bootloader and Clockwork. but now it just gets stuck on the Clockwork mod loading screen when i update .zip file from sd. I tried the factory reset, nothing. It shows S-Off though lol. Is there any info that I can give you guys from the menus I have available in order to help decode what I did wrong/what went wrong?
Click to expand...
Click to collapse
Hey Mike, I am having the same issue with my phone I tried the adb reboot recovery command in adb but the phone just reboots. I wanna know how did you boot into clockworkmod recovery or the bootloader. Please help me out I am trying to fix my phone. thanks
clockwork is "adb reboot recovery"
bootloader is "adb reboot bootloader"
you can only do this stuff if the device is recognized. If it just reboots when you do reboot recovery, you probably don't have it flashed correctly or don't have the right bootloader
danishanif said:
Hey Mike, I am having the same issue with my phone I tried the adb reboot recovery command in adb but the phone just reboots. I wanna know how did you boot into clockworkmod recovery or the bootloader. Please help me out I am trying to fix my phone. thanks
Click to expand...
Click to collapse
Download PD15IMG.ZIP here, copy and paste on the root of your SD card. Don't forget to rename the files to PD15IMG.zip before you copy them to the SD Card, otherwise it won't work
Turn off your phone.(you should have enough battery charge)
Press POWER and VOL DOWN simultaneously (this will bring your boot loader)
It will automatically install the PD15IMG.ZIP, need to confirm some actions.
Wait till the process is done....
If you did not encountered any error such as FAIL- PU, you can open your phone normally and start setting it up...
regards
Hi
I have HTC hero with CWM recovery. I was in recovery and mounted the sd card, copied few files from sd-card to comp and then on the phone I just clicked back button then realised I should have Unmounted that, having done that on the next reboot it gave me an error to remove the card and insert it, I realised something is wrong so went back into the recovery and tried mounting it but it gave me the error - "unable to write to ums Lunfile".
I dont know what to do now, the card is 8GB and dont have any other card, everything was working fine prior to this.
Plug the card into your PC and format it
sorry mate, that did not work, I also used another 2GB card, formated but that does not work as well.
Using 2GB and going into CWM recovery, while mounting it still gives the same msg?
I also checked that 8GB card putting into the card reader and using it on Win-7, the card shows fine, it is showing that Fat32 partition, obviously it is not going to show me Linux partitions.
So the point is how am I going to use that 8GB card back into my HTC hero?
should I flash CWM again on the phone? will that work?
But the phone does not recognise any sdcard so I cannot flash as well..??
what to do?
Try to reflash jordfaz's CWM
Try that : http://forum.xda-developers.com/showthread.php?t=1780438
kemoba said:
Try to reflash jordfaz's CWM
Click to expand...
Click to collapse
That does not seem to be for hero gsm i guess
SANSYF said:
Try that : http://forum.xda-developers.com/showthread.php?t=1780438
Click to expand...
Click to collapse
this thread to be honest has got only 1 person replying and was quite annoyed as he couldnt do it and was gonna throw his phone then so I am worried.
Is there anyway I could either flash RA-Hero-1.7 recovery image through command windows, if that could solve this problem?
and how to if possible.
http://forum.xda-developers.com/showthread.php?t=1723409 here, copy the .zip to a SDcard via your PC and flash it with your existing recovery
kemoba said:
http://forum.xda-developers.com/showthread.php?t=1723409 here, copy the .zip to a SDcard via your PC and flash it with your existing recovery
Click to expand...
Click to collapse
My friend you didnt get it.
My sdcard itself is not recognised by the recovery, so obviously even if I put it on the sdcard, the card itself is not recognised so I cannot use it.
Thats why I asked if it would be possible to put xxxxxx.IMG file through FASTBOOT and if anyone can advise if that would work?
Else as I already have CWM 5.xx can I replace it with recovery-RA-hero-1.7xx.IMG file? will that solve the problem?
Try it, i taught you cant mount your SD card, are you S-OFF, if you are get Amon RA .img, reboot to fastboot, do fastboot flash recovery AmonRa.img
kemoba said:
Try it, i taught you cant mount your SD card, are you S-OFF, if you are get Amon RA .img, reboot to fastboot, do fastboot flash recovery AmonRa.img
Click to expand...
Click to collapse
No I am S-ON
will that be a problem?
suddenly now adb has stopped working.
what a day begins man
could you please give me the step by step commands to flash amonra.img please..
Can you boot into your ROM ? Does your ROM "see" your SD card. If both of these questions answer yes then do this. Mount your SDCard in your ROM and copy amonra.img to it. Then do
Code:
adb remount
adb shell
flash_image recovery /sdcard/amonra.img or flash_image recovery /mnt/sdcard/amonra.img
exit
adb reboot recovery
Hopefully it should go ok, if you get some errors copy output here and i'll help
I can boot into ROM but it cannot see the sdcard?
Now no matter what I do the "adb" doesnt see the devices as well -
I treid
adb kill-server
adb start-server
adb devices
and it says no devices found
I tried going in fastboot mode and then also adb does not see my device.
it has gone to a stage - helpless
Is USB debugging on ??? Are you on linux or windows ?
kemoba said:
Is USB debugging on ??? Are you on linux or windows ?
Click to expand...
Click to collapse
windows 7 and debugging is on
:S This is weird... It sure would help if you were S-OFF but now since no SDCard or ADB this is gonna be a tough fix. Only think i see posible is to get ROM Manager from market and flash CWM recovery from there, i think that ROM Manager will flash version 2.x.x.x
i checked that, there is no market on the phone now as everything was app2sd, market is gone as well
I have Ubuntu on one machine, it was there just for some trial and learning purpose
would anything help with that
Are you sure your USB cable is OK ? No device found is almost 100% bad cable connection, do you have a spare USB
My cable is ok, i have a spare one as well, tried that , same thing, adb doesnt find anything.
I also installed android sdk20 on another pc (64bit) and that doesnt recognise phone in recovery as well..
even while connected, it doesnt even show new drivers installing or nothing..
Hi,
The N4 of my wife has big problem.
I wiped in "custom recovery" (TWRP) some stuff for return all in factory settings (this was stupid, I know)
Now, when she reboots on recovery, there is a message "No OS installed !"
How fix this, please ?
Edit: I tried with a toolkit, everything seems good, but when I boot, I have only the google screen.
Edit 2: I send with adb: image-occam-jdq39.zip, but when it failed when I try to install it.
Thanks.
https://developers.google.com/android/nexus/images#instructions
^^ negroplasty has given you the link to download the latest factory image. You can flash that to your phone no problem as long as you can boot into the bootloader (from off state, hold power + vol down)
Connect phone to pc, go to bootloader
Throw the image you want to flash to the same folder where your adb tools are
Open terminal, change directory to that folder
Then write: ./adb push EXACTNAMEOFROM.zip /sdcard/
Example of me trying to adb push Xylon
Then go to "Install" on your phone, sdcard, select the image, swipe to flash and that's it, hope this clears it.