Database Users

Hybrid data2sd

Dear all,
I want to know what exactly hybrid data2sd do..? I m using kyrillos rom v8.2.1 which have this features...
How would I know that its working on my device although I enabled it...
Because at first my internal free space was 120mb but now its reducing cause I m installing app although I transfer them to sd card
Need help here...
Thanks
Sent from my GT-I5800 using XDA App

HI, our dear friend Smonic has already explained it elsewhere at : http://forum.xda-developers.com/showpost.php?p=18715192&postcount=6
You can install Kmapp.apk , it will give u lots of options to fiddle around with hybrid data2sd, app2sd etc.
HOpe it helped, thanks smonic if it did.

still my question is how to check either its working or not...
because if its working.. thn y my internal storage is getting reduce...???
i m confused over here..

hadi_xman said:
still my question is how to check either its working or not...
because if its working.. thn y my internal storage is getting reduce...???
i m confused over here..
Click to expand...
Click to collapse
anyone can help me on this...??

install android assistant.
it shows the space, so you can see what apps are on phone and on sd

hadi_xman said:
still my question is how to check either its working or not...
because if its working.. thn y my internal storage is getting reduce...???
i m confused over here..
Click to expand...
Click to collapse
You can check it in Terminal Emulator typing
cat /data2sd.log

hadi_xman said:
still my question is how to check either its working or not...
because if its working.. thn y my internal storage is getting reduce...???
i m confused over here..
Click to expand...
Click to collapse
1. do you have partition on sd card?
2.did you copy Android folder to root of sdcard and owerwrited
it?
3.did you set in titanium backup to restore backups to internal?
and try KMapp to check out if hd2sd is ticked in app....
and under hds2d settings in KMapp check if you have ticked following:
app, log, dalvik cache..under dalvik cache there are few options what to move....and remeber: it is important that you copy this folder(Android) to root of ur sdcard...
http://db.tt/b5ahm2zW
unzip it to sdcard and owerwrite it....
screenies of KMapp:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
good luck
edit: here's the link to KMapp thread:
http://forum.xda-developers.com/showthread.php?p=18388711
Sent from my hybrid g3
Kyrillos 9.0 powered by
g3mod 2.1 b2 OC

Using root explorer go to /Data/app it show you used and available space on sd ext partion on top left corner.if you go to /Data only it show you internal free and used space.

koko008 said:
You can check it in Terminal Emulator typing
cat /data2sd.log
Click to expand...
Click to collapse
I got this when I enter the command you said.. Check screen shot...
Sent from my GT-I5800 using XDA App

You need to put a space between the command "cat" and the file "/data2sd.log" so that it reads "cat /data2sd.log"

tbschommer said:
You need to put a space between the command "cat" and the file "/data2sd.log" so that it reads "cat /data2sd.log"
Click to expand...
Click to collapse
Yeah its working now it said hybrid data2sd is enabled..
Sent from my GT-I5800 using XDA App

using hybrid2sd
installed 75 apps
still my internal storage is 123mb
yippee
thnq guys

austin266 said:
using hybrid2sd
installed 75 apps
still my internal storage is 123mb
yippee
thnq guys
Click to expand...
Click to collapse
Yep its great...enjoy don't forget to push thanks..
Sent from my GT-I5800 using XDA App

Hybrid data2sd..
hi i am using Kyrillos 9.3 wit g3mod 2.2. I enabled hybird data2sd and checked to terminal emulator..its enabled.. And i partition 512mb also using cwm .. bt when i install new apps its not directly installed in external memory its installed in internal memory(drains space..) then if possible of moving to sd apps only i can move..!
pls tell me how to enable hybrid data2sd.?

bashe1920 said:
hi i am using Kyrillos 9.3 wit g3mod 2.2. I enabled hybird data2sd and checked to terminal emulator..its enabled.. And i partition 512mb also using cwm .. bt when i install new apps its not directly installed in external memory its installed in internal memory(drains space..) then if possible of moving to sd apps only i can move..!
pls tell me how to enable hybrid data2sd.?
Click to expand...
Click to collapse
what r u saying is first u enable hybrid app2sd after that u make partition..?
it very simple just follow this STEP BY STEP... which Kyrillos said..
Optional, Enable Hybrid Data2sd [More space for apps!]
- Make a backup of your sdcard, enter CWM recovery and go to Miscellaneous => Partition SD Card. Choose the sizes you want (Recommended:512-1Gb ext, and 0mb swap]. After the partition completes, wipe data and reboot. You can now copy back all your sdcard files which you did a backup.
- Then copy the contents of the sdcard folder in your sdcard and reboot. No wipe data required, the first reboot may take time.
- Install titanium and go to titanium backup's preferences, and select Restore Backups to => Internal Storage. Then do your restore...

hadi_xman said:
what r u saying is first u enable hybrid app2sd after that u make partition..?
it very simple just follow this STEP BY STEP... which Kyrillos said..
Optional, Enable Hybrid Data2sd [More space for apps!]
- Make a backup of your sdcard, enter CWM recovery and go to Miscellaneous => Partition SD Card. Choose the sizes you want (Recommended:512-1Gb ext, and 0mb swap]. After the partition completes, wipe data and reboot. You can now copy back all your sdcard files which you did a backup.
- Then copy the contents of the sdcard folder in your sdcard and reboot. No wipe data required, the first reboot may take time.
- Install titanium and go to titanium backup's preferences, and select Restore Backups to => Internal Storage. Then do your restore...
Click to expand...
Click to collapse
hey very thanks dude.. i did all things u told below.. bt Titanium back's preferences there is option for General setting, backup setting under that backup folder name,normal apps,protected apps,marketlink, max backup history, compression.
and under the restoration settings..there is a app installer mode, force to same loaction..
and finaly batch mode setting..
which can i select.. pls tell me..
Thank u very much dude.. now working good... i installed 50apps still i have 132mb free internal ... its awesome... thanks again dude...:*

Thanks for all explanations it solved my problem

iksrats said:
Thanks for all explanations it solved my problem
Click to expand...
Click to collapse
great dont forget to hit thanks... *wink

How to unpartition?
Hi, I used kyrillos rom before I installed cm7 a7 and in kyrillos I enabled HD2S and partitioned my sdcard with 512mb, after some time I installed a fresh copy of cm7 from odin, and my sdcard still has a maximum of 6.9GB instead of 7,4gb so i was wondering if there is a way to restore my sdcard to it's previous state?

A Little Help Plz
I installed kyrillos 9.0....
Updated to v9.5....Successfully!
Copied the four files necessary for HYBRID DATA2SD to my sd card
Went into cwm nd partitioned my sd card ..... successfully!
Installed Titanium Backup which shows the partition (a2sd)
went into terminal evaluator which shows hybrid data2sd script running
But still whenever i install apps, my internal memory gets low ???
I installed Kmapp also and have HYBRID DATA2SD enabled with "app, dalvik cache & log" checked
What did i do wrong?
Remedies please..
Thanks In advance

[KERNEL][STOCK GB 2.3.x] 14-12-2012 PSN>> Kernel Memory-Modded SWAPALL v3.0 & SuperSU

[KERNEL][STOCK GB 2.3.x] 14-12-2012 PSN>> Kernel Memory-Modded SWAPALL v3.0 & SuperSU
Presenting users of stock roms and stock-based custom roms for S5830(Galaxy ACE),
PSN>> kernel
Features:
1: Compiled from Battery Extender 1.5.1 sources. (thanks to LibiSC)
2: Memory Mod applied (thanks to Doc_cheilvenerdi.org)
3: Swap enabled
4: Optional OC suport (max 960MHz)
5: Default ondemand CPU governor
6: Default deadline I/O scheduler
7: Kernel has inbuilt support for ext3, ext4, cifs filesystems (no kernel modules needed for these)
8: SU binary and apk updated to v3.1.1
9: a2sd suport completely removed from kernel to avoid any interference with memory mod
10: Rest same as in Battery Extender 1.5.1 kernel
Also available nims kernel with memory-mod applied & noswap/swap/swapall versions, OC supported. (thanks to nims11)
also BatteryExtender v1.6 mem-mod swapall-v3.0 OC supported available! (14-12-2012)
also BatteryExtender v1.2 mem-mod swapall-v3.0 SuperSU-0.99 supported available! (03-03-2013) (UNTESTED COZ NO ACE ANYMORE )
also Space Kernel v4 mem-mod swapall-v3.0 SuperSU-v1.20 supported available! (03-03-2013) (UNTESTED COZ NO ACE ANYMORE )
REGARDING publishing sources of these kernels: it is completely same as the sources posted by LibiSC BatteryExtender 1.5.1 & nims stock OC kernel on github; I haven't made any changes in it whatsoever.
Note:
1: sdext has to be formatted in ext4 only
2: Do not install a2sd or link2sd...or even any other init.d script for memory extension like armurulz script. You will fall into problems.!
3: The original data on internal /data is not moved onto the memory card partition mounted as /data.
4. The memory card sd-ext partition will be used unless phone is switched off and will not be unmounted during USB MASS Storage(only the fat32 partition will be unmounted; ie normal mass storage works perfectly).. BUT, you can physically remove your memory card (safely) only when phone is switched OFF.
5. When installing apps via apk or google play, they will be moved to sdcard by default(native android app2sd)... so if u want ur phone to always move future apps to be installed in the vast internal storage, do following in android terminal app or adb shell on PC:
su
pm setInstallLocation 1
Q.) What is this MEMORY MOD ??
A.)
Users of fast scards (class 6 or above recomended) can utilise their second sdcard partition (sd-ext) as phone's internal storage (/data) without any link2sd/a2sd/other init.d scripts.
If your sdext partition is 1GB wide, your phones internal memory (/data) will be 1GB wide.. tension free installation & use of apps.
How does it Work:
Scenario 1:
I switch on the Phone, without a MicroSD slotted in or with a microSD with a single FAT32 partition (broken or damaged microSD also suite this scenario...); GingerBread boots as usual!
No Difference!
Pure stock rom flashed via odin(rfs) or stock-based custom roms(ext4) supported.
Scenario 2:
I switch on The Phone with a microSD slotted in (with the second partition formatted as EXT4 filesystem but still EMPTY); Ginger boots acting as if
/data
is completely moved outside to microSD but just WIPED (not true obviously, and the original /data is safe inside the phone), so it resettle it from beginning...
Scenario 3:
I switch on the Phone with the second partition of the microsd (EXT4) up and running (already resettled up for use and with my userdata on it); Ginger simply boots with sdext as /data on microSD with your userdata there and tons of apps just installed from the market...
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MEMORY-MODDED SwapAll v3.0 kernels:
1: Original Internal Storage (/dev/stl13) is formatted to be used as swap partition entirely so as to fully take advantage of fast internal data partition and relieving read/write load on memory card.
3: The third swap partition on memory card created using CWM or MiniTool or Gparted (/dev/block/mmcblk0p3) IF FOUND is used as swap space, with lower priority . So it will be used for swapping only when above mentioned swap partiton on internal data storage is full.
4: Swappiness set at 30 here.
5: after flashing this kernel you wont be able to directly do a nandroid backup in cwm; so format(wipe) "/data" in recovery before attempting nandroid backup.
6: if you want to revert to any other mem-mod kernel then flash PSN_EXT4_Recovery_based_DATA_ONLY_Format_Tool-signed.zip before flashing other mem-mod kernel, thats it !
7: if you want to revert to other non-modded kernel, just do a factory reset using this tool (PSN_factory_reset_EXT4_Recovery_based_Format_Tool-signed.zip) and you need to setup all again.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note:
1: Highly recomended for use on fresh installation so that 120-160 MB of free space is available at internal /data storage for swapfile; else u can use INTERNAL DATA STORAGE formatting tool provided.
2: You can easily switch between any swapall kernels but with formatting ONLY the INTERNAL DATA STORAGE using provided tool so as to ensure swapall working.. no need to wipe anythng else
3: All Memory-mod kernels are interchangeable; but swap configurations are different !
4: Swapall versons will take approx 5-10 seconds more to boot becuse of swapfile creation on boot ! Later on its quite fast !!!!
5: Nims swapall v2.0+ kernels have bootanimation working !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD SECTION:-
SWAPALL v3.0 KERNELS:
Battery Extender 1.5.1 swapall v3.0(PSN-edited S2 bootanimation with small size)
Nims GB kernel swapall v3.0 (PSN-edited S2 bootanimation with small size)
Battery Extender 1.6 swapall v3.0
06-11-2012 Nims STOCK GB mem-mod swapall-v3.0 with new bootanimation & SuperSU 0.97 inbuilt
06-11-2012 BatteryExtender 1.5.1 STOCK GB mem-mod swapall-v3.0 with new bootanimation & SuperSU 0.97 inbuilt
(THANKS TO CHAINFIRE)
this will replace Superuser.apk(v3.1.3) and its corresponding su binary with SuperSU(v0.97) and its needed su binary
CWM / RZ RECOVERY BASED FORMAT TOOLS:-
[Thanks to chainfire & Ketut P. K. for their works]
EXT4(non-journalling) format tool to format /data /cache & /sdext to ext4 filesystem (factory reset)
EXT4(non-journalling) format tool to format internal /data only to ext4 filesystem
EXT4(non-journalling) format tool to format only sd-ext to ext4 filesystem
EXT4(non-journalling) format tool to format ALL including /system (but not /sdcard) to ext4 (TARGETED AT ROM COOKS)
Script available to clear dalvik-cache on sd-ext in case of any problem (just in case)
Script available to remove apps2sd (a2sd) & other interfering init.d files from an installed rom :highfive:

Some Tips
-: TIPS for faster responsiveness & performance :-
1: If your /system has enough free space, use it to move system dalvik-cache elements to ROM using Titanium Backup Pro. This will help in quick response to open system apps like contacts, sms, phone dialer etc.
2: If your /system still has enough free space, use it to move your "most frequently used" user-app into ROM using "convert to system app" option in Titanuim Backup. Now, some apps may not work when moved into rom (example=quickpic), then you can move it to /data again by "convert to user app". Because ROM (/system) has faster read speed, apps installed in it will open faster.
3: NOW ADRENALINE ENGINE v4.3 & v4.4 COMPATIBLE WITH MEMORY-MOD KERNELS AVAILABLE ! see here >> STOCK ROM PAGE

This is Much Needed Amazing Job!

Whoa amazing.. will try this as soon as it finishes uploading
Sent from my GT-P6200 using Tapatalk 2

psndna88 said:
8: SU binary and apk updated to latest v3.1.1[COLOR]
Click to expand...
Click to collapse
Latest SU binary and apk version is 3.2 and not 3.1.1
Gesendet von meinem ADM816HC mit Tapatalk 2

confused ...
Mardon said:
Latest SU binary and apk version is 3.2 and not 3.1.1
Gesendet von meinem ADM816HC mit Tapatalk 2
Click to expand...
Click to collapse
on checking updates via superuser app, it shows 3.1.1 as latest to me ...

Mardon said:
Latest SU binary and apk version is 3.2 and not 3.1.1
Gesendet von meinem ADM816HC mit Tapatalk 2
Click to expand...
Click to collapse
3.2 is only for ICS and JB as of now.

This Kernel install the CWM or its like the Libsc kernel we have to install?

Awesome thank you very much for sharing your work

The.Keeper said:
This Kernel install the CWM or its like the Libsc kernel we have to install?
Click to expand...
Click to collapse
cwm has to be installed seperately before flashing this kernel

psndna88 said:
cwm has to be installed seperately before flashing this kernel
Click to expand...
Click to collapse
Thank You, i'll trie

Guys let me know how did it work for you..
Releasing deodexed xwktq custom rom soon....
Sent from my GT-S5830 using xda app-developers app

this is what i was looking for, now ... i need to get me a class 10 card ... that should work fine right ???

Yes absolutely.. Im on sandisk 16gb class 6!!
Sent from my GT-S5830 using xda app-developers app

psndna88 said:
Yes absolutely.. Im on sandisk 16gb class 6!!
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
excelent! thnx for the info...

psndna88 said:
Yes absolutely.. Im on sandisk 16gb class 6!!
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
what about if i have Class 4?

Well technically anyone with a partitioned memory card can use it, no limitations... But class 6 or higher is recomended to for avoiding slow boot times and slow read/writes from memory card....
A CLASS 4 user can try this without issues other than slower speed.
Sent from my GT-S5830 using xda app-developers app

Everything working fine but theres one thing wrong, im not sure whether its rom problem or kernel, when i use apocalypse, my battery doesnt go down when i sleep but when i use this, when i sleep, its drain my battery.
Sent from my GT-S5830 using Tapatalk 2

muiz15 said:
Everything working fine but theres one thing wrong, im not sure whether its rom problem or kernel, when i use apocalypse, my battery doesnt go down when i sleep but when i use this, when i sleep, its drain my battery.
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Change to smartassV2 cpu governor using no-frills cpu control and test...
Sent from my GT-S5830 using xda app-developers app

Why dont you change the default cpu governor to SmartassV2 coz most people use that.

[KERNEL][CM7 GB 2.3.7] 06-11-2012 PSN>> firekernel Mem-Modded SwapAll-v3.0 & SuperSU

[KERNEL][CM7 GB 2.3.7] 06-11-2012 PSN>> firekernel Mem-Modded SwapAll-v3.0 & SuperSU
Mem-Mod Swapall-v3.0:
- used firekernel 09-10-2012 (thanks to dragonn)
- native sdext support removed from kernel
- /data is mounted on /dev/block/mmcblk0p2 (where /sdext used to be mounted before)
- size of ur sdext partition = size of ur ace's internal memory
- two prioritized swap partitions will boost up apps and help in ram expansion
Swap Priority 1 = internal data storage(/dev/block/stl13) fully used as swap partition
Swap Priority 2 = mmc swap partition (/dev/block/mmcblk0p3)
- boot time will be bit longer while swap partitions are being setup
- SuperSU 0.97 integrated in kernel and will replace Superuser in rom and its su binary (thanks to chainfire)
- sdext has to be in ext4 only! (will not work if no sdext present)
- recomended class6 or above sd cards for optimal performance.
Mem-Mod Swapall-v2.2.1: (REMOVED, DEPRECIATED !)
- used firekernel 09-10-2012 (thanks to dragonn)
- native sdext support removed from kernel
- /data is mounted on /dev/block/mmcblk0p2 (where /sdext used to be mounted before)
- size of ur sdext partition = size of ur ace's internal memory
- swapfile & mmc swap partition will boost up apps and help in ram expansion
Swap Priority 1 = 160MB swapfile on /dev/block/stl13
Swap Priority 2 = mmc swap partition on /dev/block/mmcblk0p3
- swapfile will not be recreated on each boot (only on first boot) and will be reformated on subsequent boots
- faster boot time even while swapfile & mmc swap partition are being setup
- SuperSU 0.97 integrated in kernel and will replace Superuser in rom and its su binary (thanks to chainfire)
- sdext has to be in ext4 only!
- recomended class6 or above sd cards for optimal performance.
INITIAL SWAPFILE VERSION: (REMOVED, DEPRECIATED !)
- used firekernel 09-10-2012 (thanks to dragonn)
- native sdext support removed from kernel
- /data is mounted on /dev/block/mmcblk0p2 (where /sdext used to be mounted before)
- size of ur sdext partition = size of ur ace's internal memory
- swapfile will boost up apps and help in ram expansion
- sdext has to be in ext4 only!
- recomended class6 or above sd cards for optimal performance.
Note:
- i have not made any changes in kernel source and have not modified core kernel zImage.
- an SDEXT PARTITION is COMPULSORY.
- user data on original internal storage will not be moved onto new /data and fresh rom setup has to be done
- DO NOT USE S2E or A2SDX init.d script or other such scripts with this kernel, u will fall into problems!
- FOR SWAPALL-v3.0: if you need to do a nandroid backup, format(wipe) "/data" in recovery before attempting backup else there will be an error(unable to mount /data)
- for detailed info on this mod, visit original PSN>> stock kernel mod page >HERE<
Preparation(for upgrade):
1: reboot into recovery
2: format original internal data storage (/dev/stl13) using recovery tool >>PSN DATA ONLY EXT4 FORMAT TOOL<<
3: flash the version u want to upgrade to
4: reboott system !
Preparation(for fresh install):
1: reboot into recovery
2: format original internal data storage (/dev/stl13) using recovery tool >>PSN DATA ONLY EXT4 FORMAT TOOL<<
3: format ur sdext partition to ext4 using recovery tool >>PSN SDEXT EXT4 FORMAT TOOL<<
4: flash the modded firekernel in recovery (see attachment)
5: select oc/non-oc & official/unofficial/experience & cpu governors type & wifi driver selection as per aroma ui.
5: tick reboot, done!
Screenshots: Official CM7 28-10-2012 nightly (with ~140MB mmc swap partition)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
USER RESPONSES:
Jar3112 said:
Testing in progress. So far I'm noticing a slightly longer opening time for some applications, but a far more greater responsiveness in heavier applications (like dead space, angry birds space...).
Great job!
Edit: I confirm this is working great. Major improve in multitasking and gaming without visible bugs and/or instability problems. That's THE mod, man! Just gave my phone a new life!
Sent from my Ace on Apocalypse Rom
Click to expand...
Click to collapse
Jar3112 said:
Ok for me testing is complete.
Better that previous version, which had hangs of the applications in some cases, this one hasn't any.
And I should say it again, this one's the best thing I tried till now, I can't believe it wasn't done before! Playing Dead Space receiving messages popups in-game and without having launcher redraws on the exiting of the game was unbelievable till now...
Sent from my Ace on Apocalypse Rom
Click to expand...
Click to collapse
Download swapall v3.0 version:
>>DOWNLOAD<<
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
NOW AVAILABLE Adrenaline Engine CM 4.4 compatible with PSN Memory Mod Kernels (CHECK ATTACHMENT !)
(Thanks to Imbawind for giving us adrenaline engine)

Changelog for SWAPALL v3.0 version:
1: removed code involving use of build.prop entries as it proved to be buggy
2: intenal data(/dev/stl13) will be formatted to linux swap filesystem and will be setup for use with priorities along with mmc swap partition
3: swappiness set at 30
Changelog for SWAPALL v2.2.1 version: (OBSOLETE, REMOVED !)
1: new code for conditional /data-swap mounting & swapfile activation
- /data-swap (/dev/stl13) will be activated when sdext is successfully mounted as /data
- swapfile on /data-swap will be created only when it is not present; if already present then it is just prepared for swap use
- used following build.prop entries managed automatically by kernel on auto-detection of sdext mount and swapfile status, thus governing conditional /data-swap mounting and swapfile activation:
PSN_ENABLE_SDEXT_DATA=1
PSN_SWAPFILE_PRESENT=0
PSN_SWAP_MAKE_NEW=1 (initial value)
- if sdext is not detected (unsuccessful mount) due to any particular reason then /data-swap is not mounted but instead /data is mounted on /dev/stl13 (traditional internal storage) and the swapfile is deleted.
- a bettter busybox is used by this kernel rather than one that comes with cm7 and it replaces busybox on rom with required symlinks.
2: SuperSU v0.97 is integrated in kernel and will replace Superuser in rom along with its su binary
Changelog for SWAPFILE version: (OBSOLETE, REMOVED !)
(initial release)

Waiting for upload

nevis said:
Waiting for upload
Click to expand...
Click to collapse
uploaded!!
need feedback !!

I am currently using your Kernel on a Stock ROM, if I change to Cyanogen MOD as i intend too, do I need to reformat using your tool?

nevis said:
I am currently using your Kernel on a Stock ROM, if I change to Cyanogen MOD as i intend too, do I need to reformat using your tool?
Click to expand...
Click to collapse
Yes
Sent from my GT-S5830 using xda premium

I've already formatted my internal storage to ext4. Can i flash it straight away?
Sent from my GT-S5830 using xda premium

jdgreat4 said:
I've already formatted my internal storage to ext4. Can i flash it straight away?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
sdext needs to be formatted to ext4 as well.

if i use this kernel with cm7 then have you checked that radio is working without switching bluetooth on?

manan001 said:
if i use this kernel with cm7 then have you checked that radio is working without switching bluetooth on?
Click to expand...
Click to collapse
havent tried. but it will be same as when original firekernel used.
sent from my Galaxy Tab 2 [GT-P3100] on stock 4.1.1

Will try!
Sent from my Ace on Apocalypse Rom

im gonna work on new version which will create swapfile only on 1st boot (longer first boot) and then in subsequent boots it will just reformat swapfile(shorter boot time)

I was planning to try this on Thursday, but if new version comes before Thursday night maybe i should wait.
I suppose it is not possible to update from actual version to the one you are going to release is it?
Sent from my Ace on Apocalypse Rom

Jar3112 said:
I was planning to try this on Thursday, but if new version comes before Thursday night maybe i should wait.
I suppose it is not possible to update from actual version to the one you are going to release is it?
Sent from my Ace on Apocalypse Rom
Click to expand...
Click to collapse
it is possible to upgrade....
Sent from my GT-S5830 using xda premium

coming in some hours ... swapall v2.1.1 version FOR CM7 with swapfile + mmc swap partition with swap priorities and reduced boot time !!!!!!!!!!!
Sent from my GT-S5830 using xda premium

psndna88 said:
coming in some hours ... swapall v2.1.1 version FOR CM7 with swapfile + mmc swap partition with swap priorities and reduced boot time !!!!!!!!!!!
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
..just in time to try it! I'll give it a shot tomorrow!
Sent from my Ace on Apocalypse Rom

SWAPALL v2.2.1 kernel published for CM7 (finally !)
NEW CHANGELOG FOR v2.2.1 kernel @ 2nd post (took all day for the code and bug fixes; swapall v2.1 code just did not work with cm7 !)

psndna88 said:
SWAPALL v2.2.1 kernel published for CM7 (finally !)
NEW CHANGELOG FOR v2.2.1 kernel @ 2nd post (took all day for the code and bug fixes; swapall v2.1 code just did not work with cm7 !)
Click to expand...
Click to collapse
damn... better try this one, any bugs known ???
edit: is this one battery friendly ???
edit 2: you need to have cm7 installed already right ?

kicsrules said:
damn... better try this one, any bugs known ???
edit: is this one battery friendly ???
edit 2: you need to have cm7 installed already right ?
Click to expand...
Click to collapse
I'm using it since last eve no bugs I encountered till now.
yes I experience good battery backup.
cm7 has to be installed before flashing this kernel
Sent from my GT-S5830 using xda premium

How about using cronmod- int2ext+ there any problem?anyone try it..im using it in apocalypse
Sent from my GT-S5830 using xda premium

[Help] Low Phone Memory

Before installing Mozilla Firefox using playstore I had phone memory of 50mb free....
But after download procedure was completed , during installation my phone restarted automatically & after the reboot I couldn't find the Firefox app in app drawer , and the free phone memory was less by 20 MB.
I cleared the cache but still the phone memory is 30 MB free instead it should be 50 MB.
..
Pls help because 20 MB means a lot to me using my Galaxy Y

normal,after install the one the file is bigger and the apk is big

Root your phone easy with update.zip and after that install link2sd and place your apps on your sd card.

I m already using link 2sd
GT S5360
Rom - Jelly Blast v4.0.5
Kernel - Marroc v2.0 Final
Overclocked - 1.2 GHz
Undervolted - -100 mV
Battery - 3200 mAh
SD Card - 32 GB class 10
Swap - 256 MB
SD / EXT - 2 GB ext 3

sunamit37 said:
I m already using link 2sd
GT S5360
Rom - Jelly Blast v4.0.5
Kernel - Marroc v2.0 Final
Overclocked - 1.2 GHz
Undervolted - -100 mV
Battery - 3200 mAh
SD Card - 32 GB class 10
Swap - 256 MB
SD / EXT - 2 GB ext 3
Click to expand...
Click to collapse
Your signature is probably taking up the extra space
Anyways so u have a second partition using link2sd? if so in options hit re-link library files and dalvik cache
Or are you just using it to force move apks to your sd card if so see how big the lib and dex for if Firefox is the lib is stored in internal memory so that may be your problem to move to sd you'll need a second partition
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
S4 INFO

sunamit37 said:
Before installing Mozilla Firefox using playstore I had phone memory of 50mb free....
But after download procedure was completed , during installation my phone restarted automatically & after the reboot I couldn't find the Firefox app in app drawer , and the free phone memory was less by 20 MB.
I cleared the cache but still the phone memory is 30 MB free instead it should be 50 MB.
..
Pls help because 20 MB means a lot to me using my Galaxy Y
Click to expand...
Click to collapse
Clear data of firefox coz it takes 20/30mb . Use dolphin
from Optimus G

sunamit37 said:
Before installing Mozilla Firefox using playstore I had phone memory of 50mb free....
But after download procedure was completed , during installation my phone restarted automatically & after the reboot I couldn't find the Firefox app in app drawer , and the free phone memory was less by 20 MB.
I cleared the cache but still the phone memory is 30 MB free instead it should be 50 MB.
..
Pls help because 20 MB means a lot to me using my Galaxy Y
Click to expand...
Click to collapse
use link 2 sd and don't update play or map bcoz update never moves:angel:

sunamit37 said:
I m already using link 2sd
GT S5360
Rom - Jelly Blast v4.0.5
Kernel - Marroc v2.0 Final
Overclocked - 1.2 GHz
Undervolted - -100 mV
Battery - 3200 mAh
SD Card - 32 GB class 10
Swap - 256 MB
SD / EXT - 2 GB ext 3
Click to expand...
Click to collapse
Try this, all GB ROM with Init.d script support
http://forum.xda-developers.com/showthread.php?t=1853669
I used Akuro DT2SD, it was great can move DATA/APP/DALVIK-CACHE to SDExt, never shown notification for memory full.
But reduce your SDCard life.

just link the dalvik cache to your 2nd partition.. :highfive:

if you still need help.. you can use link2sd but use these procedures... http://forum.xda-developers.com/showthread.php?t=2259175... don't move data folder in sdext2... your phone will perform poorly

[Q] Low internal storage: MIUI (2.3.7)

I flashed my HD2 with MIUI 2.3.7 some time ago, but now I'm constantly getting low internal storage errors. One thing I didn't do when I flashed this ROM was repartition the SD card (and I think this ROM has A2SD built in?). So I know that might probably help getting rid of the errors.
But when I checked the phone's internal memory, I saw "200 MB used - 18 MB free". So that's a total of 218MB internal memory? I'm pretty sure I'm missing at least 200Mb there.
I have another HD2 here (running AmeriCanAndroid from SD) so I checked its internal memory under "About Phone". On the HD2 with ACA, it says it has a total of 411MB internal memory. On the HD2 with MIUI, it says it has a total internal memory of 217MB. So where's the missing 194MB?
I read somewhere that the phone probably has a wrong "ClockworkMod Recovery partition layout" and that for MIUI, it needs a "150MB Partition Layout". The article didn't actually explain what those things are or how to set it up.
So, is that indeed what's going on here (any way to check)? And if so, how can I change my phone to this "150MB Partition Layout?"
Thanks in advance.

Like I said, it was quite a while ago when I flashed this ROM so I can't remember what I did when I did. But looking at my HD2 folder on my PC, I probably *did* use a 150MB ClockWorkMod recovery partition size. Also, I *did* create a 1GB ext partition on my SD Card for A2SD.
So why am I getting the "low internal storage" errors?

Many possibilities, could be the ext partition not being recognized, not in proper format...
The script may not be working (?). And you're never going to get the whole 512MB of your ROM. I think it's maximum 400, give or take. so about 400 - 150 you're left with about 250 .. I don't know where that 50 went (maybe it is not actually 400? or maybe you set a slightly larger partition).
I also never believed in a2sd, always datatoext. Your best bet is to back up your apps using titanium (or similar apps), check the partitions, and reflash ROM + a different script; that is because you can't flash a script while having been used the rom. (or you can try your luck).
dat english.

I second that, app2sd is not reliable to get more memory available.
Lack of internal storage is due to a incorrect system partition. It has nothing to do with your ext4 partition, since you're not running NativeSD.
DataOnEXT is your best option. Backup your app data and flash a ROM from start with DataOnExt option.
Be sure to make your system size large enough.
Create an ext4 partition on your sd of 1 to 2 GB for app storage.
Sent from my NexusHD2 using xda app-developers app

You should use Cronmod http://forum.xda-developers.com/showthread.php?t=1716124 INT2EXT+ is recommended
Flash your rom on nand (without dataonext) then flash Cronmod(you must have ext4 partition, 1gb is good)
On clk 1.5 you can easily change partition sizes without computer

Marvlesz said:
Many possibilities, could be the ext partition not being recognized, not in proper format...
Click to expand...
Click to collapse
This is what A2SD reports:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So it looks like it's being recognized just fine...

Zippy1970 said:
This is what A2SD reports:
So it looks like it's being recognized just fine...
Click to expand...
Click to collapse
Yes, it is. But the script you're using is useless. Use DataOnExt instead.
WARNING: You need to do a fresh install, so make a backup beforehand.

I tried DataOnExt and I can't get it to work. It keeps giving me force close errors on almost every app/widget and when I reboot my phone, all my widgets loose their settings.

Zippy1970 said:
I tried DataOnExt and I can't get it to work. It keeps giving me force close errors on almost every app/widget and when I reboot my phone, all my widgets loose their settings.
Click to expand...
Click to collapse
Try a different ROM, and increase your /system size to 285MB or 300-350MB if you have badblocks.

Zippy1970 said:
I tried DataOnExt and I can't get it to work. It keeps giving me force close errors on almost every app/widget and when I reboot my phone, all my widgets loose their settings.
Click to expand...
Click to collapse
You can't dirty flash it, you need a fresh install. If you do a dirty one, everything will force close.

Have you considered using NativeSD?

mengfei said:
Have you considered using NativeSD?
Click to expand...
Click to collapse
I second this, NativeSD can be great.
The only few cons I know of, is that NAND is a tad bit more responsive (even with highclass SD cards), battery life is shorter than if you only were to use NAND and your SD card will wear out quicker.
Other than that, it's basically superious to NAND.