I have found the solution to this horrible problem
[PROBLEM] error:[D14] Streaming hello Failed! error: Download fail!
Unbrick your Dell Streak!
Contact me anytime
- Private Message
- AIM: SiscoAIM
- Call/Text:Mod Edit, please do not put phone numbers in open forum thanks
soarly
Hi I hope you can help. The good news is I finally got the ota 2.2 update and also unlocked my att dell streak. I should have stopped there. I tried rooting it with superoneclick and now I have a bricked streak. It is stuck on the dell logo and will not boot further when I try to run recovery. it attemps to do a factory reset but gets stuck again on the boot screen. I cannot run the recovery package off the sd card for the same reason? I am not sure if there is a recovery package on the sd. Any advice would be greatly appreciated.
brandonsisco said:
I have found the solution to this horrible problem
[PROBLEM] error:[D14] Streaming hello Failed! error: Download fail!
Unbrick your Dell Streak!
Contact me anytime
- Private Message
- AIM: SiscoAIM
- Call/Text:Mod Edit, please do not put phone numbers in open forum thanks
Click to expand...
Click to collapse
Mine doesn't say Streaming failed by it is the d14 error mine says error D14 run Hex failed. see bottom of log any help?
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Fri Feb 08 11:46:37 2013
Check image DBL: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
ERROR[D14]: Run HEX Failed!
ERROR: Download fail!
Please remove the battery and try again.
Wait for modem set up ......
i was trying to install Streakdroid 2.3 ok thats cool right
well it failed hard
when i tryd to flash the new baseband amss.mbn in fastboot
i get this
Flash error -1
now it won't boot up anymore!
only get get in the volUp + power
the rest just dont work
any fixes ?
Hi, i think you must flash the baseband again !
Sry for bad english but i´m a german User
Best Regards
UKSheep
i think if you run the QDL tool that should fix the problem for you.
RDilus said:
i was trying to install Streakdroid 2.3 ok thats cool right
well it failed hard
when i tryd to flash the new baseband amss.mbn in fastboot
i get this
Flash error -1
now it won't boot up anymore!
only get get in the volUp + power
the rest just dont work
any fixes ?
Click to expand...
Click to collapse
Android Development is for Development and not Problems
Moving to General
lufc said:
Android Development is for Development and not Problems
Moving to General
Click to expand...
Click to collapse
sorry my bad
yasir_jan87 said:
i think if you run the QDL tool that should fix the problem for you.
Click to expand...
Click to collapse
more info pls
yasir_jan87 said:
i think if you run the QDL tool that should fix the problem for you.
Click to expand...
Click to collapse
QDL Tool failed also
Code:
###QDLTool: M 2.7.4.5, build ID: 1.302.20100910, time stamp: Sat Jun 11 21:24:42 2011
Check image DBL: C:\Users\RDilux\Desktop\streakflash\images\dbl.mbn ...
Check image FSBL: C:\Users\RDilux\Desktop\streakflash\images\fsbl.mbn ...
Check image OSBL: C:\Users\RDilux\Desktop\streakflash\images\osbl.mbn ...
Check image AMSS: C:\Users\RDilux\Desktop\streakflash\images\amss.mbn ...
Check image DSP1: C:\Users\RDilux\Desktop\streakflash\images\dsp1.mbn ...
Check image APPSBL: C:\Users\RDilux\Desktop\streakflash\images\appsboot.mbn ...
Check image DT: C:\Users\RDilux\Desktop\streakflash\images\DT.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#AMSS to DDR success
#DSP1 to DDR success
#DT to DDR success
#APPSBL to DDR success
#backup FSBL to DDR success
#backup OSBL to DDR success
#backup DT to DDR success
#backup APPSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#ERROR[DQ4]#Download AMSS Fail!
ERROR: Download fail!
Please remove the battery and try again.
Wait for modem set up ......
Download Fail! - 2011/06/11 21:25:11
Elapsed Time: 28.16 sec
Please flash the Baseband via Fastboot... !
Befor that, check the driver !!!
Best Regards UKSheep
UKSheep said:
Please flash the Baseband via Fastboot... !
Befor that, check the driver !!!
Best Regards UKSheep
Click to expand...
Click to collapse
just like a said before
i only can asses VolUp + Power
the rest dont work so also no fastboot!
you dont need the power buttom,
take battery out,
plug in to you computer while holding the volUP button.
is that the way you do it?
RDilus said:
QDL Tool failed also
Code:
###QDLTool: M 2.7.4.5, build ID: 1.302.20100910, time stamp: Sat Jun 11 21:24:42 2011
Check image DBL: C:\Users\RDilux\Desktop\streakflash\images\dbl.mbn ...
Check image FSBL: C:\Users\RDilux\Desktop\streakflash\images\fsbl.mbn ...
Check image OSBL: C:\Users\RDilux\Desktop\streakflash\images\osbl.mbn ...
Check image AMSS: C:\Users\RDilux\Desktop\streakflash\images\amss.mbn ...
Check image DSP1: C:\Users\RDilux\Desktop\streakflash\images\dsp1.mbn ...
Check image APPSBL: C:\Users\RDilux\Desktop\streakflash\images\appsboot.mbn ...
Check image DT: C:\Users\RDilux\Desktop\streakflash\images\DT.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#AMSS to DDR success
#DSP1 to DDR success
#DT to DDR success
#APPSBL to DDR success
#backup FSBL to DDR success
#backup OSBL to DDR success
#backup DT to DDR success
#backup APPSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#ERROR[DQ4]#Download AMSS Fail!
ERROR: Download fail!
Please remove the battery and try again.
Wait for modem set up ......
Download Fail! - 2011/06/11 21:25:11
Elapsed Time: 28.16 sec
Click to expand...
Click to collapse
There are two versions of qdl tool you ran the older, I have it, but not sure how to get you a copy. Any ideas? Large file over 100mb
vanemburghj said:
There are two versions of qdl tool you ran the older, I have it, but not sure how to get you a copy. Any ideas? Large file over 100mb
Click to expand...
Click to collapse
megaupload upload it there
RDilus said:
megaupload upload it there
Click to expand...
Click to collapse
Fist timer with megaupload think I did it correctly:
http://www.megaupload.com/?d=WJ8J8OMH
should be zip file with version 2.7.4.8, hope it works for you.
vanemburghj said:
Fist timer with megaupload think I did it correctly:
http://www.megaupload.com/?d=WJ8J8OMH
should be zip file with version 2.7.4.8, hope it works for you.
Click to expand...
Click to collapse
gonna download now i thanked you already for the hard work
just another error...
o year i using win7 x64 btw
Code:
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Sun Jun 12 17:02:33 2011
Check image DBL: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/06/12 17:03:03
Elapsed Time: 29.57 sec
There are special settings you must use for win 7 64 bit or qdl will not work. On the road right now will post them when I get home roughly 5 hours from time of this post. Think that will fix your qdl problem.
vanemburghj said:
There are special settings you must use for win 7 64 bit or qdl will not work. On the road right now will post them when I get home roughly 5 hours from time of this post. Think that will fix your qdl problem.
Click to expand...
Click to collapse
no problem i will wait
Sorry about the late post, the wife had other ideas for the day's activities anyways here you go:
Ok go to command prompt change directory to C:\Windows\system32.
Enter the following command:
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS press enter
Enter next command:
bcdedit -set loadoptions testsigning on
Reboot your computer, should see something your desktop after bootup about being test mode or something like that, at that point you know you are ready use qdl.
Run qdl tool how I do it when really brick it, which I think you did is run old version, let streak reboot or get to black screen (most likely black screen), shut down Streak, most likely by removing battery, than run newer version of qdl, reboot and you should be on BB 305. All this is not a quick process so let your Streak run for awhile, before removing battery after each boot up.
Install custom rom, don’t use Steve’s 2.0.0 amss file it is corrupted use 351 or 354 amss and dsp1.
Once your streak is up and running, need to reset your PC, go to command prompt change directory to C:\Windows\system32. Enter bcdedit /deletevalue loadoptions, once complete, enter bcdedit –set testsigning off, reboot your PC and test mode warning should be gone from your desktop.
Let me know how things turn out.
vanemburghj said:
Run qdl tool how I do it when really brick it, which I think you did is run old version, let streak reboot or get to black screen (most likely black screen), shut down Streak, most likely by removing battery, than run newer version of qdl, reboot and you should be on BB 305. All this is not a quick process so let your Streak run for awhile, before removing battery after each boot up.
Click to expand...
Click to collapse
explain this part pls lol
Do this first and if it works we will leave well enough alone, run version of qdl tool you downloaded from me. Let it go through the process and once it reboots, let it run for a bit, (mine usually takes anywhere from 10 to 20 minutes before OS starts up). If it worked right you are on BaseBand 305 and go from there. Am assuming since you tried once before you have the drivers set to Qualcomm HS-USB Diagnostics 9002, you will see that once you plug the streak in while holding volume up button.
Trying to restore a friends Nexus 7 ( 2012 - Grouper - nakasi )
I cant seem to flash the factory images to the device via fastboot and cant write custom recovery either. Some details on the device and steps already attempted:
1. I have fastboot/bootloader access (v4.23) however all other partitions seem to be corrupted including recovery. I am not able to overwrite the bootloader image either.
2. I cannot flash any image or format via fastboot or recovery (booted recovery image, not flashed, cant do that).
3. I lost recovery image when attempting to restore factory image (4.4.4 KK Image) I assume when I ran fastboot erase recovery. I have tried to flash the stock recovery and TWRP and they will not flash however i can boot the img still (fastboot boot recovery.img). Tried to boot TWRP and repair/format/change format, partitions and get an error every time.
4. Fastboot output for attempting to flash factory images results in a few different responses: FAILED (remote: (FileWriteFailed)) or FAILED (remote: Unknown error)) and some others i cant recall.
5. I tried multiple USB 2.0 ports and cables (including factory cable) with same outcome. Confirmed drivers are installed in Windows using other grouper in working condition. Also tried in Ubuntu with same results.
6. I have tried a few factory images ranging from 4.1.2 (JZO54K) -> 4.4.4 (KTU84P) -> 5.0 (LRX21P) -> 5.1.1 (LMY47V).
My best guess is the eMMC is corrupt but to be honest I am not sure what that really means and if it is repairable without hardware components being swapped out. Any help on reformatting/repairing the device partitions would be great.
Thank you in advance.
RLM703 said:
Trying to restore a friends Nexus 7 ( 2012 - Grouper - nakasi )
I cant seem to flash the factory images to the device via fastboot and cant write custom recovery either. Some details on the device and steps already attempted:
1. I have fastboot/bootloader access (v4.23) however all other partitions seem to be corrupted including recovery. I am not able to overwrite the bootloader image either.
2. I cannot flash any image or format via fastboot or recovery (booted recovery image, not flashed, cant do that).
3. I lost recovery image when attempting to restore factory image (4.4.4 KK Image) I assume when I ran fastboot erase recovery. I have tried to flash the stock recovery and TWRP and they will not flash however i can boot the img still (fastboot boot recovery.img). Tried to boot TWRP and repair/format/change format, partitions and get an error every time.
4. Fastboot output for attempting to flash factory images results in a few different responses: FAILED (remote: (FileWriteFailed)) or FAILED (remote: Unknown error)) and some others i cant recall.
5. I tried multiple USB 2.0 ports and cables (including factory cable) with same outcome. Confirmed drivers are installed in Windows using other grouper in working condition. Also tried in Ubuntu with same results.
6. I have tried a few factory images ranging from 4.1.2 (JZO54K) -> 4.4.4 (KTU84P) -> 5.0 (LRX21P) -> 5.1.1 (LMY47V).
My best guess is the eMMC is corrupt but to be honest I am not sure what that really means and if it is repairable without hardware components being swapped out. Any help on reformatting/repairing the device partitions would be great.
Thank you in advance.
Click to expand...
Click to collapse
Look for the "wug tool kit"
Sent from my A0001 using Tapatalk
Thank you for the reply. I have tried WugFresh's NRT already. Same output with force flash enabled and disabled but I believe force flash is just extracting the update.zip in the factory image package and flashing each part individually, which is what I was doing manually.
Hi,
I just got this phone and tried to root it, but accidentally flashed the factory boot.img for the 4XL, and not the 4.
I am now stuck in Fastboot Mode and I am not able to get into recovery mode either.
I've tried downloading the correct Pixel 4's boot.img and flashing that, but to no avail.
Any help is appreciated as I am quite the noob.
The Fastboot screen reads:
Product revision: flame MP1.0(NA)
Bootloader version: c2f2-0.2-594065
Baseband version: g8150-00041-191016-B-5945070
Serial number: 9B161FFAZ0029R
Secure boot: PRODUCTION
NOS production: yes
DRAM 6GB Micron LPDDR4X
UFS: 64GB SKHyinx
Device state: unlocked
Boot slot: b
Enter reason: error boot prepare
Nevermind, I figured it out. I ran flash-all.bat
Hi, i have zenfone 3 Ze552KL, after 4 year of service, without reseon, the screen cant turn on. i restart phone by power+volume up.
After reboot its stuck on asus logo. After some try to reflash, always have message permission denied, partition not allowed etc...
I try format all but now its stuck on android logo (normal).
But with fastboot i can flash system.img recovery.img modem (NON-HLOS_00460e1.bin) and boot.bin.
Files extracted in WW_ZE552KL_15.0410.1807.75_M3.10.47.19_Phone-user.raw with asus tool (RC4).
Asus flash tool dont work (partition not allowed or write not allowed).
But dont boot again. Any idea of what other partition needed for phone boot? and/or tools for making this correctly?
ps : recovery doesnt work (cant access by power + volume down).
ps2 : sorry for bad english , i'm french.
Thanks in advance
When i try flash factory raw :
[2021-03-08T 19:47:04Z] (0x00000000) [H3AZ***********] Detected this device
[2021-03-08T 19:47:15Z] (0x00000000) [H3AZ***********] Getting OS version...
[2021-03-08T 19:47:15Z] (0x00000000) [H3AZ***********] Get the OS Version: WW_ZE552KL-13.20.10.152-
[2021-03-08T 19:47:15Z] (0x00005016) [H3AZ***********] Uploading OS Version...
[2021-03-08T 19:47:16Z] (0x00006003) [H3AZ***********] Upload to as.eservice.asus.com failed!! Server response: Cannot find any on going RMA nubmer!
[2021-03-08T 19:47:18Z] (0x00007002) [H3AZ***********] The FRP Account is Unauthorized by Server!!
[2021-03-08T 19:47:19Z] (0x00000000) [H3AZ***********] Unzip image ...
[2021-03-08T 19:47:29Z] (0x00000000) [H3AZ***********] Run flash image script ...
[2021-03-08T 19:47:31Z] (0x0000401D) [H3AZ***********] Run flash image script failure(FAILED (remote: failed to write partition))
Edit: i can only flash boot, system, modem, recovery (but dont work ...) and one or two other partition. But for example i cant flash aboot, devcfg etc...
When i try erase recovery, phone answer "remote. device is locked. cannot erase