Database Users

SPC error on *228 w/Cricket, need to edit SPC/MSL to 000000, possible?

I know my spc- Cricket has my esn- my min = mdn = msid... I have a Cricket prl, but at *228 I get a PSC failure message, a one minute freeze and soft reset.
I cannot find how to intentionally change one's spc/msl- is it possible?

Look around their is a solution already posted...
On top of that if you do not want to reset you're MSL to 000000 and you know it. Just manually program the phone. You do not need to OTA the phone if you have you're MSL, MIN (MSID) and MDN.

amoamare said:
Look around their is a solution already posted...
On top of that if you do not want to reset you're MSL to 000000 and you know it. Just manually program the phone. You do not need to OTA the phone if you have you're MSL, MIN (MSID) and MDN.
Click to expand...
Click to collapse
I've seen your cricket rom for the 6800 on Hofo- but, before I get into booting roms, I would like to just have a functional phone for the weekend Or maybe a week...
I've already used my psc to update the prl, and edit the mdn, etc... I've used the 1040, and 1041 prls, and still have the psc error at *228...
_______________________________________
Update
using drivers from here I was able to get diag working. Found the com port the phone was in via pc's device manager (was 16), updated that com in qpst (clicking on the qpst globe and adding that port), opened qpst's service programming, then just entered my msl, clicked read from phone, loaded the phone's info, rewrote the msl to 000000 and clicked write to phone- unhooked, *228, viola' no psc error... no more
I get cricket with *228, but that's the only call that's going out on the phone...
I would rather just get the phone recognized by qpst and use service programming(?) to edit the msl- just not sure how to do that yet. I've read others having to use a 6700 driver to get their 6800 recognized- will I need to disable active sync as well?
ug
Thanks- This is stressful

Can't get EVDO cuz HDR Auth ID is wrong and I can't edit it for some reason...

ok here's the quick: let sprint custs run (i know). relocked and reflashed original verizon ROM dump. manually replaced epst settings and DMU reset. everything works now cept EVDO because:
my HDR AN AUTH User ID: is [email protected]!!! (wow those custos really f you in the end)
when i go to edit it says "write "HDR AN AUTH User ID" error"
I know no EVDO because of failed auth is a common problem, but i think my problem is a bit unique in that i know it needs to be my#@vzw3g.com, but it just wont let me change it. any ideas???
are you not allowed to edit your own auth? can verizon (called 3 times, all morons)? what about qpst or qxdm or whatever?
thanks ahead of time,
-karl

**bump**
anyone?

You can use EPST to change your HRD ID etc.
You will need to know what your MSL code is though.
If you just use the view option of EPST it will not show you the security settings.
If you look at this thread http://forum.ppcgeeks.com/showthread.php?t=25226
It has all the info you need to find out your MSL code etc. I am sure that info is elsewhere on this site to. That is just the place I found it all.
Cheers

my msl is 000000 i can get into edit the settings in epst, it just gives me an error when i try to change my hdr an auth! its so weird!
when i access my settings in qpst i get a write error when i try to change it!
i dont get what gives! hellppp!!
:/
-karl

robstak said:
my msl is 000000 i can get into edit the settings in epst, it just gives me an error when i try to change my hdr an auth! its so weird!
when i access my settings in qpst i get a write error when i try to change it!
i dont get what gives! hellppp!!
:/
-karl
Click to expand...
Click to collapse
ok robstak i had the same problem. If you have QPST 2.7 build215 you would be able to make that work. All you have to do is connect the phone by ##3424# or ##3424 send to put it in diagostic mode. Run QPST be sure its connected then open service programming. after clicking read it will then ask you to input your MSL code. It will only take you about less than 2 seconds to read you phone. once it does go to PPP Config tab then click on UM/AN buttons on the lft side. You will then see a red mesh on the USerId. Click on the red mesh and click ctrl D and it will enable you to change that parameter then write to phone. Viola now it works. Hope this will help you

secret code Zte blade (san francisco)

I'm not responsible for what might happen on your phone if you choose to dial any of these!
These are the codes that work on the standard phone dialler app on the Orange San Francisco, but I'm pretty sure they'll be almost identical on other models that we collectively know as "ZTE Blade". Known small differences (in texts) are down to whether the firmware expects to be running on an OLED or TFT display, and whether you've deleted seemingly unused apps like ChiperTest.apk, fcctest.apk and QcNvTest.apk. Most are prefixed with "*983*", which is "*ZTE*" in phone letters -- I've added a mnemonic for the other part where I think it's obvious (feel free to suggest better ones!).
"Automatic Inspection" runs through the basic tests automatically (usually you need press a button to move on to the next bit -- don't get thrown by any blank colour test screens!). There are a number of interesting items for developers, with hardware info and other goodies. If any of the descriptions don't make the function obvious then it's either poorly written or I don't know exactly what it does (I'll happily update this if others can explain better).
If the code has been recognised by the dialler then it will react immediately when you enter the final "#". If nothing happens when you've done that, don't press Dial!
Edit: on the ROMs based on the Japanese 2.2 you need to put the phone into "Engineering Mode" first, by dialling *ZTE*OPENEM# (*983*673636#) -- this action will be confirmed by a quick pop-up. To close this mode, dial *ZTE*CLOSEEM# (*983*2567336#) -- this then prompts whether you want to do a Factory Reset, which you do not have to do (you can simply Back away from this screen).
Dial Mnemonic Operation
*983*0# Menu (20:Battery/OLED/Back Light/Vibrator/Ringer/LED/Key/OLED off/SD/BT address/Radio Info/Memory/TouchPaint Test/Audio Loop/FM/Camera/GPS Test/IMEI/IMSI)
*983*3640*01# IMSI
*983*25# Battery Info[/COLOR]
*983*31# OLED Test
*983*26# Backlight Test
*983*850# Radio Test 0
*983*86# Vibrator & LED Test
*983*84# Ringer Test
*983*07*01# Headset Test
*983*07*02# Key Test
*983*3470# LCD Test
*983*81# SD Test
*983*890# -
*983*26*# Radio Test 1
*#06# IMEI
*983*27274# CRASH Reboot
*#08# Test Flag [Note: requires QcNvTest.apk in /system/app]
*#09***# BT Test
*983*1275# _ASK Dev Info
*983*7# Menu (4:Version/IMEI/IMSI/BT address)
*983*3640# DOH+ Phone Info (inc ping test, radio on/off)
*983*636# MEM Memory Test
*983*28# BT Emode BT Test
*983*477# GPS GPS Test
*983*21# Audio Loop Test
*983*70# Automatic Inspection
*#18# LED Test
*#19# TouchPaint Test
*983*36# FM FM Test
*983*57# Factory Reset
*983*473# Camera
*#23# Video Camera
*983*10# Delete (Touchscreeen) Calibration File
*#25# FM Test
*983*2726# SIM Contacts Op 1
*983*37# SIM Contacts Op 2
*983*6726# SIM Contacts Op 3
*983*154# "test" Menu (12:Self-starting/Software
Version/Hardware Version/PSN/Test Flag/[Completed]/Board Serial/Bluetooth
Address/SMS security/SMS Registration Status/Flash Type/PRL Version/Serial Configuration)
*983*07# Menu (9LED/Ringer/Vibrator/Key Test/Audio Loop/Headset Test/FM/Camera/SD)
*983*5182# Dev Info
*983*7469# SHOW Automatic Inspection
*#26***# Sensor Test
*983*7936# QXDM Save Qxdm in log system
*987*0# Menu (4roduce Information[->"test" Menu]/Automatic Inspection/Factory data reset/Battery information)
*#27***# Compass Test
*983*87274# USBSI USB Switch Test
*983*06# BT Test
*983*564738# LOGSET LOG Set (inc sys_rw)
*983*93# FCC Test [Note: requires fcctest.apk in /system/app]
*983*2377# CFQP Call Forwarding Query with PowerOn
*983*24474636# CHIPINFO Chiper Test (chip info) [Note: requires
ChiperTest.apk in /system/app]
*983*29873283# AXUPDATE Touchscreen Updater
*983*73564# SDLOG SD Log​
Note: the above are for the standard ROM (well, apps) running 2.1. The current Froyo ROM (with standard dialler, etc.) does not have the Touchscreen Updater, but adds:
Dial Operation
*987*123456# DM Test
IN modaco

Hello, what code shude I use to know if my SF is TFT or Amoled?
Regards!

Check the build number in Settings>About Phone. AMOLED ends in 05, LCD ends in 08. IIRC all white SF models are 08 and most grey are 05 (unless its a newer unit which will likely be 08).

Thank´s man.

Mine is 01. What that means?
Looking at the screen characteristics it seems like LCD.

Thanks man. great post

Really nice. Works on Boost Mobile Warp Sync N9515.
Would you happen to have a code that forces prompt for unlock? (Changing sim cards doesn't trigger anything)

same here... up for this....

No Boost Mobile ZTE Warp Sync N9515 Unlock Screen
chinnyss said:
same here... up for this....
Click to expand...
Click to collapse
I think unlocking the Boost Mobile is a lost cause. I've tried several other sims and the only codes I've found to show the unlock menu don't work:
1) Alright then please remove the SIM card and try this code ###825*09#,
2) Got the prompt for code? Please enter the code you received,
3) Failed above, try *983*8284# to access the Unlock Menu,
4) Failed above, finally try *983*865625# to access the Unlock Menu.

zte warp elite n9518 rooted but still i can't use MSL reader or alogcat it says in root checker verify root congrats and after rebooting i got to root again please help just need to get SPC and or MSL code

You the MAN! THA KS.

kelvinpacquette said:
zte warp elite n9518 rooted but still i can't use MSL reader or alogcat it says in root checker verify root congrats and after rebooting i got to root again please help just need to get SPC and or MSL code
Click to expand...
Click to collapse
Can u tell me rhat what do i need to enable usb debigging or adb mode ?? I have to connect my zte z982 device to miracle sodtware, but unable to connect because frp lock.
I cant enable usb debugfing

techeligible3322 said:
Can u tell me rhat what do i need to enable usb debigging or adb mode ?? I have to connect my zte z982 device to miracle sodtware, but unable to connect because frp lock.
I cant enable usb debugfing
Click to expand...
Click to collapse
Edit: on the ROMs based on the Japanese 2.2 you need to put the phone into "Engineering Mode" first, by dialling *ZTE*OPENEM# (*983*673636#) -- this action will be confirmed by a quick pop-up. To close this mode, dial *ZTE*CLOSEEM# (*983*2567336#) -- this then prompts whether you want to do a Factory Reset, which you do not have to do (you can simply Back away from this screen).
Dialing the first set of numbers made it possible for me to turn on abd....
Sent from my SM-G550T using Tapatalk

Alright
paigesdavis1996 said:
Edit: on the ROMs based on the Japanese 2.2 you need to put the phone into "Engineering Mode" first, by dialling *ZTE*OPENEM# (*983*673636#) -- this action will be confirmed by a quick pop-up. To close this mode, dial *ZTE*CLOSEEM# (*983*2567336#) -- this then prompts whether you want to do a Factory Reset, which you do not have to do (you can simply Back away from this screen).
Dialing the first set of numbers made it possible for me to turn on abd....
Sent from my SM-G550T using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply

How did you enter / enable adb? I have a 971 and the 2nd code from your site doesn't work, I am able to enable eng. mode
I also tried the connect to computer in control panel and that doesn't do anything either.
Frp locked

Trick

techeligible3322 said:
Thank you for your reply
Click to expand...
Click to collapse
This worked for me and I have the ZTE z blade max thank you

Has this been proven to root the phone yet ? Please leave feedback .

Good News
#Starlord37# said:
This worked for me and I have the ZTE z blade max thank you
Click to expand...
Click to collapse
That's very good to know you are welcome

I haven't had a chance to try it fully yet as I have been trying to root my girlfriends Moto e4 with magisk which I will probably have done by the end of the night and then I plan to tackle my z982 will keep you posted though

[Q] URGENT! International Unlock NG2?

I'm leaving the country on Sunday and I need to be able to use my phone with an international SIM. What is the quickest way to international unlock it by then? I see a lot of conflicting information like I can't downgrade from NG2 or something like that. Any help?

Hope This helps.
gmap516 said:
I'm leaving the country on Sunday and I need to be able to use my phone with an international SIM. What is the quickest way to international unlock it by then? I see a lot of conflicting information like I can't downgrade from NG2 or something like that. Any help?
Click to expand...
Click to collapse
if you need any help; please pm me, or search this site for answers. I am sure you are not the first person, to want to do this or to have this question.
Before you continue; please note that i am not liable for any damages, that may occur to any the devices you attempt this on.
To undo any and all of the changes that you are about to make to your phone(**NOTE** the following will erase all data on your phone so backup everything you want to keep.), (1) first download an app called MSL utility and write down your MSL code on a computer, or any other device maybe even pen and paper.(2) go to your phone settings hit activate this device when it is done loading do not click done.(3) click on the menu button and go to PST settings. (4) go to the ##SCRTN# menu and follow what it prompts you to do, your phone will then reboot automatically. (5) do steps 2 and 3 over again and go to the ##RTN# menu and follow the prompts your phone should than reboot automatically and now you should see an invalid SIM sign. **NOTE** any time it asks you to enter a code it means enter you MSL code. Remember to undo these steps first. (No. 2)**NOTE** when your done with steps below download BuildProp Editor(you must have root), and click on the pencil icon; scroll to the bottom, and add these two lines: ril.sales_code=LOL ro.csc.sales_code=LOL)
No. 1) = No, you do not need to downgrade.
No. 2)**NOTE** when your done with steps below download BuildProp Editor(you must have root), and click on the pencil icon; scroll to the bottom, and add these two lines:
ril.sales_code=LOL
ro.csc.sales_code=LOL
save and reboot
with sim inside the apn should be set automatically. If not, well than google your apn, and add it manually.
done.
This is a re-post(i would thank whom ever posted this, though i do not recall where i found it.); because i am to lazy, to write it from scratch.
1. Use ssu.apk to unlock it first
2. use cf auto root to it
3 .use adb:
su
am broadcast -a android.provider.Telephony.SECRET_CODE -d android_secret_code://27663368378
UMTS -> DEBUG SCREEN -> PHONE CONTROL -> NETWORK CONTROL -> GCF
There the phone is domestic unlock without downgrading the modem.
1. be on stock NG2. ssu.apk force-closes on aosp/custom roms.
2. Run ssu.apk and do the unlock. This does not require root.
3. do the other commands through ADB(step 3 Above), just in case. You may or may not need them. I don't know why it worked for me without them. That step DOES require root.
4. Test your sim card and make sure your phone can read it, and if possible, make a call, try text/data, whatever.
You're Welcome!

I had NAE i downgrade to mdc then unlocked it and after that i download firmware which is NG2-xas i think and after upgrading its still unlock.
For that method and files you can search international sim unlock.
Its easy to do it.

imaxuout said:
if you need any help; please pm me, or search this site for answers. I am sure you are not the first person, to want to do this or to have this question.
Before you continue; please note that i am not liable for any damages, that may occur to any the devices you attempt this on.
To undo any and all of the changes that you are about to make to your phone(**NOTE** the following will erase all data on your phone so backup everything you want to keep.), (1) first download an app called MSL utility and write down your MSL code on a computer, or any other device maybe even pen and paper.(2) go to your phone settings hit activate this device when it is done loading do not click done.(3) click on the menu button and go to PST settings. (4) go to the ##SCRTN# menu and follow what it prompts you to do, your phone will then reboot automatically. (5) do steps 2 and 3 over again and go to the ##RTN# menu and follow the prompts your phone should than reboot automatically and now you should see an invalid SIM sign. **NOTE** any time it asks you to enter a code it means enter you MSL code. Remember to undo these steps first. (No. 2)**NOTE** when your done with steps below download BuildProp Editor(you must have root), and click on the pencil icon; scroll to the bottom, and add these two lines: ril.sales_code=LOL ro.csc.sales_code=LOL)
No. 1) = No, you do not need to downgrade.
No. 2)**NOTE** when your done with steps below download BuildProp Editor(you must have root), and click on the pencil icon; scroll to the bottom, and add these two lines:
ril.sales_code=LOL
ro.csc.sales_code=LOL
save and reboot
with sim inside the apn should be set automatically. If not, well than google your apn, and add it manually.
done.
This is a re-post(i would thank whom ever posted this, though i do not recall where i found it.); because i am to lazy, to write it from scratch.
1. Use ssu.apk to unlock it first
2. use cf auto root to it
3 .use adb:
su
am broadcast -a android.provider.Telephony.SECRET_CODE -d android_secret_code://27663368378
UMTS -> DEBUG SCREEN -> PHONE CONTROL -> NETWORK CONTROL -> GCF
There the phone is domestic unlock without downgrading the modem.
1. be on stock NG2. ssu.apk force-closes on aosp/custom roms.
2. Run ssu.apk and do the unlock. This does not require root.
3. do the other commands through ADB(step 3 Above), just in case. You may or may not need them. I don't know why it worked for me without them. That step DOES require root.
4. Test your sim card and make sure your phone can read it, and if possible, make a call, try text/data, whatever.
You're Welcome!
Click to expand...
Click to collapse
Thanks so much for the quick response!
Couple of things, I actually called Sprint to ask them to unlock it for international SIMs, and they said they'd go ahead and do it. I flashed back to Stock and did the UICC Unlock thing in the menu like they told me. The phone rebooted. I think it's unlocked then, correct? If not, I'll go ahead and do this method tonight.
Also, does this phone support LTE (Is that the right term) on international GSM networks or just 3g?
Thanks!

gmap516 said:
Thanks so much for the quick response!
Couple of things, I actually called Sprint to ask them to unlock it for international SIMs, and they said they'd go ahead and do it. I flashed back to Stock and did the UICC Unlock thing in the menu like they told me. The phone rebooted. I think it's unlocked then, correct? If not, I'll go ahead and do this method tonight.
Also, does this phone support LTE (Is that the right term) on international GSM networks or just 3g?
Thanks!
Click to expand...
Click to collapse
it may be unlocked; you would not know for certain unless, you attempt to insert an international sim card.
Depending on which country you are traveling to. Some countries only have 2-G, then there is some that use 3-G, some also utilize HAPA+, and LTE. It also depends on the sim card they give to you. If the give an LTE sim card, it may work (for LTE or HSPA+). Though it depends on which band/frequency, its relying on. click here to see LTE frequency data sheet. click here to select the country you are traveling to, this way you'll know if you will be able to be on a favorable network.
You're Welcome!

imaxuout said:
it may be unlocked; you would not know for certain unless, you attempt to insert an international sim card.
Depending on which country you are traveling to. Some countries only have 2-G, then there is some that use 3-G, some also utilize HAPA+, and LTE. It also depends on the sim card they give to you. If the give an LTE sim card, it may work (for LTE or HSPA+). Though it depends on which band/frequency, its relying on. click here to see LTE frequency data sheet. click here to select the country you are traveling to, this way you'll know if you will be able to be on a favorable network.
You're Welcome!
Click to expand...
Click to collapse
I'll be in Israel, and their networks support LTE

gmap516 said:
I'll be in Israel, and their networks support LTE
Click to expand...
Click to collapse
I don't know if that's true. What i do know is that the last time i was in Israel, i used Golan Telecom, and i only had a 3G connection. i do know that they state they have a 4G-Lte network, but i guess i'll have to find out in a few months from now.
good luck.

How to force 4G only (LTE only) Mode?

Can someone help me I am trying to force my Huawei P10 Plus to use LTE/4G only mode. I have latest Firmware/Patch Level.
I have tryed many service codes in format like *#*#.....#*#* codes but I can not set the LTE Only mode.
Isn't it possible without "root"?

It is possible to force "4G only" without root. First download "Setting Database Editor" from playstore. Open it and look for "hw_networkmode_preferences". I use this value "9,3,2,1,11" on my phone. Save it and restart your phone. If you still don't get "4G only" option then you need to open the "Setting Database Editor" again and look for "hw_add_4g_only". Mine was set to "250". You need to change it according to your country mobile code. Look for your mobile country code here: https://en.wikipedia.org/wiki/Mobile_country_code. In my case I change the value to "250;502" since 502 is my country code. Save it and restart your phone.
Tested on rebranded P10 Plus 256GB.

jula182 said:
It is possible to force "4G only" without root. First download "Setting Database Editor" from playstore. Open it and look for "hw_networkmode_preferences". I use this value "9,3,2,1,11" on my phone. Save it and restart your phone. If you still don't get "4G only" option then you need to open the "Setting Database Editor" again and look for "hw_add_4g_only". Mine was set to "250". You need to change it according to your country mobile code. Look for your mobile country code here: <1. o prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!>. In my case I change the value to "250;502" since 502 is my country code. Save it and restart your phone.
Tested on rebranded P10 Plus 256GB.
Click to expand...
Click to collapse
Thank you very much for your Help! I already installed the DB Settings Editor and found out that hw_networkmode_preferences were already "9,3,2,1,11" so this wasn't the case. Additionally I found that I have to add "hw_add_4g_only" so I added it with the wrong Country Code because I didn't know what the hw_add_4g_only means. I was searching for it a few days now and never got an answer, so I was trying to ask here. And you made it clear now. The Wikipedia Link was very helpful and it works now for my Country. I have to set it 262 for O2 Telefonic Germany.
So again Thank you very very much!

Using Huawei P10 (VTR-L29) 8.0.0.374 (185) solution above works for me too.

jula182 said:
It is possible to force "4G only" without root. First download "Setting Database Editor" from playstore. Open it and look for "hw_networkmode_preferences". I use this value "9,3,2,1,11" on my phone. Save it and restart your phone.]
For me, It works. Huawei P10 Lite
Thanks
Click to expand...
Click to collapse

Worked on my Samsung Galaxy S9

Honor 6X is stubborn as heel... Nothing works.
Can't even find the commands... Sigh!

First Method :
1. Use SIM 1 as the default connection setting
2.
You need to install this app for FREE
at Google Play
https://play.google.com/store/apps/details?id=com.teknokia.force4glteonly
pro version : https://play.google.com/store/apps/details?id=com.teknokia.force4glteonlypro
galaxy store: https://apps.samsung.com/appquery/appDetail.as?appId=com.teknokia.force4glteonly
pro version : https://apps.samsung.com/appquery/appDetail.as?appId=com.teknokia.force4glteonlypro
3. Run the application, press the SIM 1 only or Android testing button. You will enter two LTE Switcher options and also 2 Android testing options.
4. You can try all of them which support your phone.
If the telecommunication operator you are using does not support VoLTE (Voice over LTE) and uses LTE Only Mode, so regular calls will be blocked.
Second Method :
1. DOWNLOAD Force 4G LTE Only 2020 Pro application from Google Play
2. Run the Application
3. Select SIM 1 Only menu, then Hidden Activity
4. wait to load until 100%
5. tap the search box type RadioInfo
6. In the DEvice Info app section, there is a RadioInfo activity.
7. Long Tap 3 options will appear: Create Shortcut, Launch Activity, Edit Shortcut. I recommend Select Create Shortcut to make it easier for us to enter network activity mode without having to bother opening the Force 4G LTE Only 2020 Pro application.
8. Please select Launch Activity to enter the Radio Info
9. Select LTE Only in set preferred network type

I was able to get it working on my huawei y7a sometime last year using settings database editor. Abouy 2 weeks ago i factory reset my device due to an unrelated issue and now when i try to enable it again i get an error saying my system software has rejected the edit. I tried with the version of setedit from f-droid and got the following "Unexpected failure you shouldn't not change private system settings." does anyone know what the problem could be?

K.Hatake said:
I was able to get it working on my huawei y7a sometime last year using settings database editor. Abouy 2 weeks ago i factory reset my device due to an unrelated issue and now when i try to enable it again i get an error saying my system software has rejected the edit. I tried with the version of setedit from f-droid and got the following "Unexpected failure you shouldn't not change private system settings." does anyone know what the problem could be?
Click to expand...
Click to collapse
I have the same issue with p30 pro. It seems to me that after some recent updates, they've locked those settings somehow.

alesu69 said:
I have the same issue with p30 pro. It seems to me that after some recent updates, they've locked those settings somehow.
Click to expand...
Click to collapse
did you find the solution for this problem because i have the same issue and i get the error message from setedit if you have the solution plz respond to me . thx

Make a shortcut to the activity .settings.radioInfo (phone info) of the app com.android.phone (telephone)

namous zakarya said:
did you find the solution for this problem because i have the same issue and i get the error message from setedit if you have the solution plz respond to me . thx
Click to expand...
Click to collapse
I found a solution. You would have to use "Adb shell" (usb debugging).
The code is:
adb shell settings put system hw_networkmode_preference 11

Techie0fficial said:
I found a solution. You would have to use "Adb shell" (usb debugging).
The code is:
adb shell settings put system hw_networkmode_preference 11
Click to expand...
Click to collapse
This worked for me. Thanks