Hello,
Playing with and testing many programs crowded my registry (there are always bits of data left after programs removal).
I would like to refresh my phone by loading the factory defaults so I would reverse the phone to the status "ground 0" like I've just received it from the retailer.
How do I do that?
Thank you in advance!
Tsk tsk... it's all in the manual!
Have a look at this mate...
http://hardreset.eu/htc_hd2_leo_hard_reset_soft_reset_en.html
Start-settings- Security-Factory Reset
upgrade ROM code error (Please Try Again)
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0X50
Upgrade ROm code error
Please Try Again
this what my screen says after i got an error on returning to LEOIMG.NBH
i want to return my os to windows mobile 6.5...after so many month using android nand
Please help me with this error...
i tried the hard reset and soft reset...
hope to hear from everyone who are genius and kind xda developers..
jtreyes_dimanche said:
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0X50
Upgrade ROm code error
Please Try Again
this what my screen says after i got an error on returning to LEOIMG.NBH
i want to return my os to windows mobile 6.5...after so many month using android nand
Please help me with this error...
i tried the hard reset and soft reset...
hope to hear from everyone who are genius and kind xda developers..
Click to expand...
Click to collapse
When I got problems because of Magldr 1.13, I went first to SPL 1.66 using HSPL2, then first flashing stoc ROM 1.66 and then stoc ROM 3.14.
I hope it helps
My touch screen decided to take a crap on me. Tmobile is sending me a replacement in the mail which should be here in about 5-7 days.
I just need some help returning the phone back to stock. I already removed ChunkyRom using Task29. Then booted the phone to the bootloader to flash the updated Tmobile rom. Now when I boot this is what the screen shows.
PB81120 SS-B3
SPL-2.08 HSPL 8g XE
0x05
CotullaHSPL 0x40
My dad has the same phone (completely stock) and this is what his shows:
pb8 ss-b3
spl-2.10.0000 8g xe
microP(LED) 0x05
MicroP(Touch) 0x40
So I am not sure. I just dont want tmobile to charge my account. Thank you for the advice. I tried to follow some of the posts already on this amazing forum but I wasnt having any luck. I promise I tried to search!
Yeh I am having the same exact problem...My screen just stopped working out of no where and now I need to revert back to original rom radio and hspl...anyone got a link or instructions?
kplonsky said:
My touch screen decided to take a crap on me. Tmobile is sending me a replacement in the mail which should be here in about 5-7 days.
I just need some help returning the phone back to stock. I already removed ChunkyRom using Task29. Then booted the phone to the bootloader to flash the updated Tmobile rom. Now when I boot this is what the screen shows.
PB81120 SS-B3
SPL-2.08 HSPL 8g XE
0x05
CotullaHSPL 0x40
My dad has the same phone (completely stock) and this is what his shows:
pb8 ss-b3
spl-2.10.0000 8g xe
microP(LED) 0x05
MicroP(Touch) 0x40
So I am not sure. I just dont want tmobile to charge my account. Thank you for the advice. I tried to follow some of the posts already on this amazing forum but I wasnt having any luck. I promise I tried to search!
Click to expand...
Click to collapse
Pivo99 said:
Yeh I am having the same exact problem...My screen just stopped working out of no where and now I need to revert back to original rom radio and hspl...anyone got a link or instructions?
Click to expand...
Click to collapse
Download your official stock rom. Extract it to get the nbh file. Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse your HSPL back to spl
10507 said:
Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse your HSPL back to spl
Click to expand...
Click to collapse
This is the part where I am confused. I renamed the file to LEOIMG.nbh but I dont have a clue how to flash it when I am in the bootloader mode.
you not seached for the million and 1 posts about how to return to stock???if its copied right, instead of boot loader it will have LEOIMG to install..search to do it right
Well I formatted my SD card to FAT32 and put the LEOIMG.nbn on the sim card. Boot the phone to the bootloader and it doesn't automatically go to the other screen that is needed to flash the phone.
This is all you have to do..
This is all you have to do:
1. Download HSPL3_PKG, don't ask where, google it!
2. Extract and run as if you were going to flash the HSPL, hit next on first screen, now you get a drop down list, select 2.08.0000 not 2.08.HSPL.
3. Run the program and tarraaaaa.
4. NOw just flash your stock rom the normal way and not from sd since it still didn't work for me after removing HSPL.
fmedrano1977 said:
This is all you have to do:
1. Download HSPL3_PKG, don't ask where, google it!
2. Extract and run as if you were going to flash the HSPL, hit next on first screen, now you get a drop down list, select 2.08.0000 not 2.08.HSPL.
3. Run the program and tarraaaaa.
4. NOw just flash your stock rom the normal way and not from sd since it still didn't work for me after removing HSPL.
Click to expand...
Click to collapse
Here is HSPL3_PKG
Is my HD2 back to stock ?
Hi, after reading loads of posts on this forum I think I managed to put my phone back to stock as I need to return it to HTC.
I had HSPL with some custom rom.
Here are the details from my phone after removing HSPL and Cusrom ROM:
With volume down:
PB81100HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Installed rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
I will appreciate if anyone can tell me if this is a Stock HD2.
Thanks !
mario_250r said:
Hi, after reading loads of posts on this forum I think I managed to put my phone back to stock as I need to return it to HTC.
I had HSPL with some custom rom.
Here are the details from my phone after removing HSPL and Cusrom ROM:
With volume down:
PB81100HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Installed rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
I will appreciate if anyone can tell me if this is a Stock HD2.
Thanks !
Click to expand...
Click to collapse
Yes you are back to stock
I finally got mine to read :
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED)
MicroP(TOUCH)
Is this stock for a tmobile HD2 bought in north america?
GutterFaceMobile said:
I finally got mine to read :
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED)
MicroP(TOUCH)
Is this stock for a tmobile HD2 bought in north america?
Click to expand...
Click to collapse
If you have the 3.10 stock ROM then yes that is correct, but if you have the 3.14 stock ROM you need SPL 3.03.0000.
I like the pic for your avatar too by the way.
Help restoring htc hd2 to factory condition after mgldr. Android install
HI, Im new here and im really in need of help restoring my htc hd2 tmobile to factory condition so i can return it for warranty replacement because my screen is not responding at all.
Thanks and more power
This is hat mine shows up.
This is what mine shows up
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x04
Is this already been restored to stock so i can return it for warranty exchange..I updated the rom from TMobile site 3.14 version..
Thanks so much.
blue_pirate said:
This is what mine shows up
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x04
Is this already been restored to stock so i can return it for warranty exchange..I updated the rom from TMobile site 3.14 version..
Thanks so much.
Click to expand...
Click to collapse
Yes. All SPL xx.0000 is a stock SPL
T-Macgnolia said that if you have 3.14 rom you need SPL 3.03.0000 to make it a stock version, but mine is SPL-2.10.000 and 3.14 rom, if i return it for warranty exchange are they gonna find out that i hacked it and restored it back?
Thanks
blue_pirate said:
T-Macgnolia said that if you have 3.14 rom you need SPL 3.03.0000 to make it a stock version, but mine is SPL-2.10.000 and 3.14 rom, if i return it for warranty exchange are they gonna find out that i hacked it and restored it back?
Thanks
Click to expand...
Click to collapse
Yea I've mentioned this several times, that the tmous 3.14 doesn't seem to update the spl. Its not a problem because it will run happily on spl 2, unlike regular hd2 which will not run 3.14 on anything less than spl 3.03.
samsamuel said:
Yea I've mentioned this several times, that the tmous 3.14 doesn't seem to update the spl. Its not a problem because it will run happily on spl 2, unlike regular hd2 which will not run 3.14 on anything less than spl 3.03.
Click to expand...
Click to collapse
Thanks so much for the info, im new to HTC HD2 hacking and i really appreciate all the infos and help..
Hello guys,
I have a HTC HD2. ( Not the T-Mobile version ) . My sister tried to update the phone to android. i don't know what she did but now the phone don't starts it shows a screen ' Software update failed, Please try again ' and then shows the Red-Green-Blue-White screen with this message.
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
Now what should i do to upgrade the phone to android ?
( P.S - I am a total newbie in android platform. )
Try a search on this site for Android install and follow the instructions, looks like your sister got part of the way there but failed somewhere along the line.
[email protected] said:
Hello guys,
I have a HTC HD2. ( Not the T-Mobile version ) . My sister tried to update the phone to android. i don't know what she did but now the phone don't starts it shows a screen ' Software update failed, Please try again ' and then shows the Red-Green-Blue-White screen with this message.
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
Now what should i do to upgrade the phone to android ?
( P.S - I am a total newbie in android platform. )
Click to expand...
Click to collapse
Well you need to download HSPL4 for HTC HD2 and install or better say downgrade it to HSPL 2.08. You can find it here on forum just give yourself some time and search. There was already the same thread and I wrote how to solve it. You need to go to bootloader mode first. Turn off your phone and hold volume down button and hold it while you press power button. Hold both of them until you see three color screen. Then comnect phone to pc and run HSPL4 on your pc and choose HSPL 2.08 in the menu flash it and wait until you see we hacked it on your phone. Then you can flash any custom rom. I recommend flashing using pc. Not using sd card method.
And next time read carefully when installing android on your phone.
Sent from my HTC HD2 using xda premium
RUUNBH
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
help me in this case
trying from last 3 hours but cannot find useful information on this error
I used to have android on my htc hd2 I wanted to roll back to windows so I tried to follow the steps
downloaded the rom from htc site and I found it is wrong
my hd2 is not t mobile
its model number is T8585
made in taiwan
hspl4 does not recognise the phone
gives out connectivity error
but my phone shows usb in white boot loader
when i tried with other rom it gives out 00028002 dont allow message
so if any one can help me please.......
I'm looking for some HD2 stock ROM for WWE and singapore ROM but most of the links are dead. Anyone still have the valid links?
Try here
http://forum.xda-developers.com/showthread.php?t=623283
orangekid said:
Try here
http://forum.xda-developers.com/showthread.php?t=623283
Click to expand...
Click to collapse
If not usefull, you may try here:
http://shipped-roms.com/index.php?category=windows mobile&model=Leo.
stock rom
Can someone help me please. I need a stock rom for my hd2 but I dont know the exact one for it. It is PB81100 with IMEI: 352666048914537.
I got it bricked. When i try to power on, it only vibrates without showing anything on screen and when I boot to the 3-color stage, i cannot flash task 29 because it hangs at 0%.
It shows PB8100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Can anyone please help me on what to do?
try an energy custom wm6.5 rom flashed via usb cable.
what colour are the call & end keys ? very possible it has serious hardware fault or requires jtagging due to wrong rom/radio flash ...