i have a droid x that cannot receive the the new 2.3.340 update. i guess some bloatware has been deleted and then reinstalled via apk's. after installing the bloatware it still wont install so now i wanna try restoring the phone back to 2.1. is there anything special i need to know about doing this? anyone have links to help me out? i have been researching this for most of the day but havent had any luck. the link i have downloaded, contains RSD lite 4.7 w the patch, motorola drivers and SBF 2.1 dx patch. idk if having the leaked version of 2.2 vs an ota version of 2.2 will make a difference thanks, Adam
Use rsd 4.8 and you can just flash the 2.3.320 full sbf then the 2.3.340 system only sbf and you will be on the most recent verzion. There are detailed tutorials somewhere on here to do this.
Sent from my DROIDX using XDA App
If pm me I can give u the full ota update or I can give the link where u can update the kernal, firmware, and bootloader individualy
Sent from my DROIDX using XDA App
Related
Guys,
I was wondering if it possible to unroot My Droid X that has 2.2 OTA from Verizon? I tried to unroot with a few root/unroot problems but once I reboot the Black Ninja is still there and I'm still rooted. The only reason why I want to know just in case I might have to return my phone to Verizon . Thanks in advance.
There may be an easier solution but why not use RSD and the OTA 2.2 SBF. I know it is not a complete SBF for OTA 2.2 but it should reload the OTA 2.2 system files thous removing root and restoring the phone back to OTA 2.2.
Do you know where I might be able to get the 2.2 OTA ? THanks.
If you follow this link you should be able to get RSD as well as the SBF file needed.
The 2.2 sbf file is just the system files without any apps? Would I be able to get the official 2.2 ota once I flash with the.2.2 system only sbf?
Sent from my DROIDX using XDA App
The SBF should be the system files so I would think it would have all the stock apps with it as well. To be honest I haven't tried using it to see what it restores but like I said I would assume all the stock apps should be reinstalled with it I would imagine.
Then what's the difference between the official 2.2ota sbf that isn't released yet?
Sent from my DROIDX using XDA App
Found this on my twitter feed just spreading it around.
http://www.droid-life.com/2010/12/0...3-340-coming-madden-2011-to-be-pre-installed/
Sent from my DROIDX using XDA App
I'm on the 2.3.320 leak, not going to .340 until an SBF comes out.
Sent from my DROIDX using XDA App
gio2005 said:
I'm on the 2.3.320 leak, not going to .340 until an SBF comes out.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
if you're on tranq 3.5.1 you're already on .340
I guess I am glad I didn't upgrade to .320
Sort of....
I had no idea Tranquility 3.5.1 had 2.3.340. I donate to several ROM teams (why not) and I am looking to see what Team DeFuse does with Fission 2.3->2.x build, hopefully it will include 2.3.340 soon. I really like the speed of their ROM.
so basically this .340 update is the same as the leak version? so if i manually somehow updated to this .340 am i able to use the latest sbf file?
3.40 is not the same as 3.20!
Personally, I'd like to know what the difference is between the two. I have the 3.20 leak and the 3.20 sbf but can I use them once i go to 3.40?
If there is any difference in .320 and .340 (beyond Madden of course) it isn't readily apparent. Someone can try doing a diff on the system files between Tranq 3.5.1 and stock .320, but the bootloader and kernel are the same. The baseband hasn't changed at all since 2.3.15.
When is the update going live?
Sent from my DROIDX using XDA App
As per Droid Life>>> DROID X 2.2.1 Update Will Be Available Tonight?
My question is, will I see the update?
I have flashed the leaked VRZ_MB810_2.3.32_1FF_01.sbf, I am not rooted and haven't removed any apps.
If u updated with TBH leak version you will have to wait for there patch or fix or whatever it is they are doing before you will be able to get the OTA.
I just got the DX update. I never signed up for the feedback network either. I pulled it.
Anyone know if we should hold off? dont want to lose root for good....
can you post the zip please?
Installed the update and lost root. It's also rebooting into clockwork recovery after powering down and back up. Reboot system option works. I was just rooted, no ROM or themes.
mochamoo said:
Installed the update and lost root. It's also rebooting into clockwork recovery after powering down and back up. Reboot system option works. I was just rooted, no ROM or themes.
Click to expand...
Click to collapse
if clockwork mod is working then maybe you can reroot with an update.zip?
someone i follow on twitter @bandroidx says he has the update.zip
thanks but I mean a download link for the update.zip like @ megaupload/etc. He just says he got the update thats all. I keep getting download check not available.
cray1000 said:
if clockwork mod is working then maybe you can reroot with an update.zip?
Click to expand...
Click to collapse
Afraid I don't have this. I do have a nandroid backup and the .320 sbf. Can I restore the backup or flash the sbf if need be? Don't want a bricked phone...
Am pretty sure that I am booting into recovery because of how koush's bootstrap works. It was installed and since I don't have root it can't complete it's thing. In this case it might be a good thing
Z4root is supposedly working, try that.
Any news on when this is gonna come out so i can SBF fully back to stock any info would be appreciated thanks
You can do this currently by combining .320 and .340 SBF files. I have not heard anything yet on a full .340 being released.
-----
Sent from my Droid X. Powered by Big Red, customized by NATF.
Isn't this essentially a full SBF?
http://www.mydroidworld.com/forums/...ystem-baseband-2-3-340-kernel-bootloader.html
It contains the system-only SBF, as well as individual patches for the bootloader, kernel, and baseband.
aohus said:
Isn't this essentially a full SBF?
http://www.mydroidworld.com/forums/...ystem-baseband-2-3-340-kernel-bootloader.html
It contains the system-only SBF, as well as individual patches for the bootloader, kernel, and baseband.
Click to expand...
Click to collapse
I dont think so. I believe a full sbf overwrites the full phone image from /* in other words there is more to the OS architecture than just /system.
If im incorrect, anyone that has more info/corrections, please feel free to chime in.
Sent from my DROIDX using XDA App
NotATreoFan said:
You can do this currently by combining .320 and .340 SBF files. I have not heard anything yet on a full .340 being released.
-----
Sent from my Droid X. Powered by Big Red, customized by NATF.
Click to expand...
Click to collapse
Could you explain this process? Im running rubiX Focused on my 2.3.15 version and from my understanding, having the newest system software would be beneficial in installing and using newer roms etc.
I have both a nandroid backup of my stock albeit rooted setup of 2.3.15, as well as the system 2.3.15 sbf. I also have the 2.3.32 sbf file. I realize that if I sbf back to a clean 2.3.15, I can just accept the OTA update to 2.3.34.
Two questions from here:
Which method for updating would be best? From the OTA update to 2.3.34 would I be able to sbf back to 2.3.32 or would i be stuck until a 2.3.34 full sbf is released?
Sorry in advance for jacking the thread
*bump* would like to know this as well.
ElephantGlue said:
Could you explain this process? Im running rubiX Focused on my 2.3.15 version and from my understanding, having the newest system software would be beneficial in installing and using newer roms etc.
I have both a nandroid backup of my stock albeit rooted setup of 2.3.15, as well as the system 2.3.15 sbf. I also have the 2.3.32 sbf file. I realize that if I sbf back to a clean 2.3.15, I can just accept the OTA update to 2.3.34.
Two questions from here:
Which method for updating would be best? From the OTA update to 2.3.34 would I be able to sbf back to 2.3.32 or would i be stuck until a 2.3.34 full sbf is released?
Sorry in advance for jacking the thread
Click to expand...
Click to collapse
Tge limitation on whether or not you can go back is based upon the version if the bootloader that the sbf wird I believe. I have not used anything above the 2.3.15 sbf so I'm not sure if the sbf you're speaking of includes a bootloader version
Sent from my DROIDX using XDA App
If you use your 2.3.320 SBF you said you have, you can then use this update: http://www.droid-life.com/2010/12/09/droid-x-2-3-340-system-sbf-released-for-2-3-320-leak-users/
It should get you fully updated to 2.3.340. It does involve flashing your phone twice, but after that you should be good (as far as I know with my still limited knowledge of these things...)
Can't you just flash the 2.3.13 sbf then get the OTA update again? Any risk in doing that?
TreyStyles said:
Can't you just flash the 2.3.13 sbf then get the OTA update again? Any risk in doing that?
Click to expand...
Click to collapse
I don't think you can flash 2.3.15 once you have passed 2.3.320 as your bootloader will have been upgraded.
I recently flashed a full SBF of 2.3.320, then the Kernel, Baseband and Bootloader zips, then the 2.3.340 SBF. Bam, I have a stock phone that looks like it just came from Verizon. Its got all the preinstalled apps, blur, etc... it's basically stock 2.3.340.
For about 30 seconds until I rooted it and loaded Fission 2.4.3 on it...
nvrmnd..........
jeftep said:
I don't think you can flash 2.3.15 once you have passed 2.3.320 as your bootloader will have been upgraded.
I recently flashed a full SBF of 2.3.320, then the Kernel, Baseband and Bootloader zips, then the 2.3.340 SBF. Bam, I have a stock phone that looks like it just came from Verizon. Its got all the preinstalled apps, blur, etc... it's basically stock 2.3.340.
For about 30 seconds until I rooted it and loaded Fission 2.4.3 on it...
Click to expand...
Click to collapse
I had done this also, but I couldn't see to stop the phone from booting into Clockwork on a battery pull.
Which SBF Do I need?
I just bought a DX and am coming from a D2. I know how to do everything but it is confusing finding out which SBF i need. I need to know which SBF, or SBF's i need to unbrick phone if need be. Info for phone is as follows.
Android Version 2.2.1
Official OTA 2.3.340 (Guy updated to 2.3.340 at Verizon Store before i left with it.)
Thanks for any help.
Problem solved thread can be closed.
Sent from my DROIDX using XDA App
Android Version 2.2.1
Official OTA 2.3.340 (Guy updated to 2.3.340 at Verizon Store before i left with it.)
Click to expand...
Click to collapse
I'm in the same boat willjohnson, which sbf was the correct one? TIA
If you are already on .340, you do not need anything more than the .340 System-Only SBF released by TBH. Until Motorola has a new update that modifies the bootloader, or other components, no ROM you install will change these.
Bricked DX
has anyone ever seen the following:
Bootloader
30.04
Err:A5,70,70,00,1F
MEM_MAP Blank
Service Req'd
Ive been trying to flash this thing back to stock after botching a tranquility install and rsd lite wouldn't recognize my phone, then i tried to flash it anyway using a .340 sbf and then this is what i ended up with.
Please let me know.
thank you
That is just the system sbf, you are flashing. You need to be flashing the full sbf 2.3.32, if you are on bootloader 30.04.
Update everyone! I just started a thread in Development subfroum about a full 2.3.340 update zip that can flashed as long as you can access clockwork recovery. I recommend checking it out and downloading the file for safe keeping. It was put together by Maderschramm.
Getting ready to upload the full 2.3.34 sbf from a verizon retail store. Not sure if it's safe to put the direct link here. If not, send me a pm, should have it up by tonight at the latest. this is the official sbf and can be used with rsd lite.
Did a little digging, but can't find my exact problem.
I'm on the leaked 2.3.340 using the update to 2.3.320 update, followed by the SBF to 2.3.340. I would like to update to the OTA, but need to know if it's necessary. I've seen posts about updating the kernel, radio, and stuff. Did the SBFs not update these files?
I attempted to use the 2.2 OTA SBF to go back and update, but that failed. My old nandroid of the 2.2 OTA is failing to update (it downloads, but reboots saying failed update). What should I do?
Is it just the patches that you want?
http://www.mydroidworld.com/forums/...ystem-baseband-2-3-340-kernel-bootloader.html
Awesome, thanks. I'll scan that thread to figure out what and how to update.
I used the 2.3.320 SBF and then used the system updater in that link I provided for. 340. I don't know if it makes a difference since we both got to 340 in a different way.
Sent from my DROIDX using XDA App
Well, because of my upgrade method all I had to upgrade was my kernel. Working like a dream now.
Perfect. Glad you got it working.
Sent from my DROIDX using XDA App
I am currently running a leaked version of 2.2.
Does anyone know if I will be able to get the ota update to 2.3 that's rumored to be coming out soon?
Thanks
From what I read, no, you cannot go directly from a leaked version to OTA. You will need to sbf back to stock froyo (will all bloatware intact) before you can get the OTA update. There is a link somewhere in the forums to the sbf files.
My kernel is 2.6.32.9-gfb07887
android version: 2.2
system version: 2.3.9.mb810.verizon.en.us
erea77 said:
My kernel is 2.6.32.9-gfb07887
android version: 2.2
system version: 2.3.9.mb810.verizon.en.us
Click to expand...
Click to collapse
Wow. To be honest, I have never seen that system version. Anyway just go to the site I mentioned above and look for the droid x. You also could probably use a file called madderstock.zip which will accomplish the same the but I do not currently remember where to find it
U can find maderstock file here... Its a flashable .zip ... Same as sbfing your phone just apply using dxbootstrap
http://droidmodderx.wordpress.com/maderstock-zip-ota-2-3-340-with-file/
Sent from my DROIDX using XDA App
What SBF should I use if my bootloader is 30.01??
Use the full 2.3.340 sbf it should update ur bootloader in the process
Sent from my DROIDX using XDA App
owenbeals said:
Use the full 2.3.340 sbf it should update ur bootloader in the process
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Google search sbf droid x 30.01. Lol that was my bootloader when I permanently bricked my first DX. But thats a different story.
You could try the newest sbf file as mentioned above. I actually am not sure if it will update your bootloader, but I haven't tried it so I would trust the person who posted it
Here is the info you need:
http://1kds.net/SBF-Page.php
You will have to get to system 2.3.340 to get the official update. You will need to be stock (you can have root). You have to have all bloat replaced, no bootstrap, and odexed. An sbf will do all this for you.
Sent from my DROIDX