Database Users

[Q] Please Help!!!!!Rogers magic

Rogers magic in continuous reboot
I have a ROGERS MAGIC that is in continuous reboot. I Have to take the battery out to get it to power off. I have done a hard reboot but still have the same result. I got tired of waiting for an update from 1.5 from rogers and was using the new cyangon Rom using ROM Manager.I can get the fastboot screen up but I don't have a clue what to try next. Any help would be greatly appreciated.

This is the procedure I used to root my Rogers' Magic and worked just fine...I guess if you do this from the beginning that will work for you too
I have not created this list or did the research for it, another great man has done it! Kudos!
MANUAL PROCEDURE FOR ROGERS MAGIC
Status of script will be written at bottom of file
.
You must have ADB working to connect to your magic before this procedure will work.
On XP machines, you can install HTC sync on your PC, put the phone into USB-debugging
and connect it to the PC. The correct drivers should install automaticly, if not, Google will
be your friend.
.
1. Make sure that the listed files are present in the folder with the Rootme.bat file
.
a) update-cm-5.0.8-DS-signed.zip
b) bc-5.0.8-ebi1-signed.zip
c) gapps-ds-ERE36B-signed.zip
d) exploid
e) Radio_HTC_PVT_32A_3.22.26.17.img
f) hboot-1.33.2010.img
g) recovery-RA-sapphire-v1.7.0H.img
h) update-hboot-1.76.2007-signed.zip
i) recovery-RA-hero-v1.6.2.img
.
2. Connect your magic to your PC and enable USB debugging on your phone.
.
3. Open up a command window and navigate to the directory containg the data
files that need to be sent to your phone.
.
4. Using the syntax "ADB PUSH {file name} {location}" push the following files to
phone. Pay attention to the "/" and make sure you don't miss or add any
a) update-cm-5.0.8-DS-signed.zip to folder /sdcard/
b) bc-5.0.8-ebi1-signed.zip to folder /sdcard/
c) gapps-ds-ERE36B-signed.zip to folder /sdcard/
d) exploid to folder /sqlite_stmt_journals
e) recovery-RA-hero-v1.6.2.img to folder /data/local
f) update-hboot-1.76.2007-signed.zip to folder /sdcard/
.
Eg: adb push update-cm-5.0.8-DS-signed.zip /sdcard/
.
5. Run the following commands in the command window
a) adb shell chmod 777 /sqlite_stmt_journals/exploid
b) adb shell /sqlite_stmt_journals/exploid
.
6. Turn bluetooth on and then off on your magic
.
7. Unplug and then replug the usb cable from your magic
.
8. Enter the following commands into the command window
a)adb shell (you will get a $ prompt)
b)rootshell (you will be prompted for a password)
c)secretlol (you will get a # prompt)
d)chmod 666 /dev/mtd/mtd1
e)exit (you will be back to $ prompt)
f)flash_image recovery /data/local/recovery-RA-hero-v1.6.2.img
g)exit
.
9. Turn off your phone.
.
10. Boot into recovery by holding the Home + Power keys.
.
11. Using the trackball, select "Flash ZIP from SD Card"
.
12. Select update-hboot-1.76.2007-signed.zip
.
13. Press the HOME key to confirm selection.
14. Reboot phone as requested. It will boot back into recovery.
14. Enter the fillowing into the command windown
a)adb shell reboot bootlaoder
.
15A. When phone has booted into fastboot enter the following into the command window.
a)fastboot flash radio Radio_HTC_PVT_32A_3.22.26.17.img
b)fastboot flash hboot hboot-1.33.2010.img
c)fastboot flash recovery recovery-RA-sapphire-v1.7.0H.img
d)fastboot reboot-bootloader
.
16. When phone has booted into fastboot enter the following inot the command window.
a)fastboot erase system -w
b)fastboot erase boot
c)fastboot oem powerdown
.
17. After phone powers off, reboot into recovery by holding Home + Power keys.
.
18. Using the trackball, select "Flash ZIP from SD Card" and flash the following files.
Select the home key to confirm each file
a)update-cm-5.0.8-DS-signed.zip
b)bc-5.0.8-ebi1-signed.zip
c)gapps-ds-ERE36B-signed.zip
.
19. After the last file has finished flashing reboot the phone normally.
It can take anywhere from 5-15 min for the first boot.

[Q] HELP! changed windows and phone is now unusable!

so my laptop recently crashed and the ony way to get it back was to re-installl windows which is what i did, but after setting my laptop back up i try to install the new cm7 v1.8 but when i go into cmd and type fastboot.exe -w
it comes back with " fastboot .exe" is not recognized as an internal or external command
i have tryed to install the fastboot drivers ( but i cant seem to find how to, because the computer recognizes the phone as fastboot and doesnt have a problem with it). can anyone please help i have been trying for 3 days now and i have no phone :'(

hi friend
I think u need to check the following thinks
1) had you placed the total folder which contains necessary file (the folder must contain the following files . adb.exe , AdbWinApi.dll , AdbWinUsbApi.dll , boot.img , fastboot.exe , flash_all.bat , flash_all_nowipe.bat , flash_boot_nowipe.bat , flash_system_nowipe.bat , system.img )
if you downloaded V1.8 from the link then the file will not have this all file so you need to download all this so if you are not able to download just mail me at [email protected] i will send all this file then you can able to carry out the flashing of ROM as per the following guide
Checklist:
adb - needed to flash the ROM
fastboot - needed to flash the ROM
AdbWinApi.dll - needed to flash the ROM
AdbWinUsbApi.dll - needed to flash the ROM
boot.img - the boot part of the ROM
system.img - the actual OS
***EXTRACT THE CONTENTS OF THIS ZIP FILE IN A FOLDER CALLED ANDROID ON THE C: DRIVE (you need to create the folder)***
1. Open CMD with administrator privileges (Search for CMD in the start menu and right click on 'cmd' and click 'Run as Administrator' )
2. Prepare the phone by switching it off and holding 'Volume Down' + 'Camera' whilst powering on again, the phone should then display the LG logo then show a blank screen, this indicates the phone is now in fastboot mode.
(i) connect the phone to the computer via USB cable, and wait for the necessary drivers to install
2. Then type into the cmd window:
'cd C:\Android' (without the '')
(i) Then type:
'fastboot.exe -w' (without the '')
(ii) Once that's completed, type:
'fastboot.exe erase system' (without the '')
(iii) Once that's completed, type:
'fastboot.exe flash system system.img (without the '')
(iv) Once that's completed, type:
'fastboot.exe flash boot boot.img' (without the '')
(v) Once that's completed, type:
'fastboot.exe reboot' (without the '')

Have u changed tha envoirnment parameters?
Sent from my GT540 using XDA App

i am assuming that you have to download sdk for the adb files? the thing is i didnt download it before and it all worked through cmd? and im not sure what the enviromentable thing is ?

there are some downloadable packages on xda wich have all the files needed extracted from the android sdk. Just download the android sdk and use cmd to go to the tools directory and use fastboot. it will work (possibly have to copy some dll files from an other directory to ..\tools\

thanks everyone for their help!! will download these files for future use. but found this and downlaoded it and it install for me!! XD
http://download975.mediafire.com/zchh935v5omg/hw03ruc1qeiancu/Install+SwiftDroid+v
by the way do you know where i could find the extracted files?http://media.xda-developers.com/images/smilies/smile.gif

Just Write
cd C:\Android ... or where ever you extracted it and hit enter

[TOOLS][ADB][Windows]Push files to device through ADB*now include deodex tools*

See my previous post before in post#2
This is a simple batch file using ADB..
With this you can use ADB to manage your file or APK , Backup, Push Your File to device, or pull file from device..
ADB Work on Stand by Mode (Home Screen) or in Recovery Mode, just set it up..
Extract ADBTOOLSv1.0.1.zip and you will find :
command.bat : Windows Batch Command
_BACKUP_OUT : folder where your backup process done and made
_FLASHING_OUT:
folder for flashing your :
kernel (place your boot.img here)
recovery (place your recovery.img here),
modem (place your modem.bin here)--only for gt p7300
_MODDING_FILE: Folder where your file were created by PULL process
Folder where file for PUSH process should be here
_BATCH_INSTALL : place your APK here for batch install
tools: ADB.exe and busybox binary
success_APK : A folder created for All apk from _BATCH_INSTALL move here after instalation.
Click to expand...
Click to collapse
Notes:
ADB can access all file from device from CWM Recovery, especially CWMR 5.5.0.4
ALL you need to do is:
From Recovery menu, you need to mount /data and /system for ADB working..
THEN, From Command Prompt set ADB Mode to "recovery".(This Batch File set ADB mode to "Home Screen" by default)
So when you use ADB from Online device ( I mean a stand by device).. you dont need to change ADB Mode..
After you set up, you can use ADB as you like..
Code:
=============================================================================
:::: ADB TOOLS FOR GT P7300 and P7310 by suwandiapr
-----------------------------------------------------------------------------
| [*] Before use read this:
| --make sure you have installed adb drivers for your device
| --enable "USB DEBUGGING"
| from (Menu\Settings\Applications\Development)
| --enable "UNKNOWN SOURCES"
| from (Menu\Settings\Applications)
| --increase screen timeout to 10 minutes
| --connect USB cable to PHONE and then connect to PC
| --MAKE SURE YOU HAVE A ROOTED DEVICE AND BUSYBOX
| --Place the right file in the right folder
| --Some feature like Flashing need more tester..so please be aware
| --If you use adb recovery feature, set ADB Mode to recovery
| mount /data and /system from your device recovery
| --If you use adb from homescreen, set ADB Mode to HomeScreen
| --All you Do is your own Risk, use with carefull
-----------------------------------------------------------------------------
****Turn on the screen and allow superuser permission when asked!****
_____________________________________________________________________________
| Current MODDING FILE: NONE | ADB MODE :HomeScreen | sdcard path: /sdcard/|
=============================================================================
:::: ADB PULL ::::
=============================================================================
0 Pulling file from /data ( see result in _MODDING_FILE)
1 Pulling file from /system partition ( see result in _MODDING_FILE)
2 Pulling file from SDcard ( see result in _MODDING_FILE)
3 Backup recovery ( see result in _BACKUP_OUT)
4 Backup Kernel ( see result in _BACKUP_OUT)
5 Backup modem (for P7300 only-see result in _BACKUP_OUT)
6 Backup /system (tar format-see result in _BACKUP_OUT)
7 Backup /efs (tar and .img format-see result in _BACKUP_OUT)
8 Backup APK from /data/app (tar format-see result in _BACKUP_OUT)
=============================================================================
:::: ADB PUSH ::::
=============================================================================
9 Pushing file to /data ( from _MODDING_FILE to device)
10 Pushing file to /system ( from _MODDING_FILE to device)
11 Flashing recovery ( from _FLASHING_OUT to device)
12 Flashing Kernel ( from _FLASHING_OUT to device)
13 Flashing modem for GT P7300 ( from _FLASHING_OUT to device)
=============================================================================
:::: Setting ::::
=============================================================================
14 Set current working File ( for PUSH and PULL )
15 Install busybox on device (need root)
16 Set ADB mode (if you on recovery mode)
17 Install apk ( from _MODDING_FILE to device)
18 Install batch apk ( from _BATCH_INSTALL to device)
=============================================================================
:::: Reboot Menu ::::
=============================================================================
19 Reboot System
20 Boot Into Recovery
21 Reboot Bootloader
22 Quit

My previous post
inspiration from congox case
when you got a problem with bootlop and you forget make a nandroid backup
only have file from other ROM with flashable.zip and need to push the file from your computer to device
you have a recovery support with mount /system and mount /data (tested on CWM 5.5.0.4 and overcome CWM 5.1.2.6) and you can enter this menu while bootloop happen..
STEP 1 : MANUAL
Connect your device with computer
From device, Go to recovery - mounts and storage - mount /system and mount /data
From your computer go to adb terminal and type this
Code:
adb shell "ls /data/media/"
If you can see list of file from your device sdcard, so you make adb work for your device ..
Place your zip file on your path, says on C://backup.zip and you want to copy the file to /sdcard/download/ and type this code
Code:
adb push backup.zip /data/media/download/.
wait for copying progress done..
After you done with moving file to device sdcard, check content of your sdcard with this code
Code:
adb shell "ls /data/media/download/"
When you found your file from list, you can flash backup.zip from recovery
STEP 2 : WINDOWS BATCH FILE
I made a simple Batch File for windows (sorry i dont have MAC or LINUX distro) , this file will make a folder with name "emergency" in SDCARD and with your files inside that.
Extract the FLASHER.rar somewhere on your Local folder,example: on your " Desktop" Folder
in folder "FLASHER" you will find runme.bat and folder "files"
Rename your file ((flashable.zip files you want to send through ADB) to "backup.zip" and then Put your file into this path /FLASHER/files/myfiles/ (just replace the existing "backup.zip" with files from yours)
Connect your tab with Computer
Reboot into Recovery Menu from your device
From menu Mounts and Storage choose mount /system and /data
From your Computer go To Folder flasher and klik runme.bat
Follow the instruction on window untill copying process done and device reboot to recovery again (copying process will take a minutes depend on your file size)
Now you can flash a emergency ROM from recovery
Window instruction
Code:
-----------------------------------------------------------------------------
ADB EMERGENCY COPYING TOOL for TAB 8,9
created by SUWANDIAPR
-----------------------------------------------------------------------------
[*] This script will:
(1) COPY YOUR FILE FROM COMPUTER TO SDCARD/emergency/*
(2) CHECKING YOUR CONNECTED DEVICE DIRECTORY
[*] Before u begin:
(1) make sure u have installed adb drivers for ur device
(2) make sure u have installed CWM 5.5.0.4 ON YOUR DEVICE
(3) connect USB cable to PHONE and then connect to PC
(4) Rename your Flashable .zip file with "backup.zip"
and place inside "myfiles" folder on your Computer
(5) from Recovery Menu, Choose "Mounts and storage" then
-mount /system and -mount /data
(6) CONNECT YOUR TAB WITH PC WHILE ON RECOVERY MENU
---------------------------------------------------------------
CONFIRM ALL ABOVE
Sorry for my Bad english, if there is somebody want to correct every words i use , im very welcome and will change with the proper words and sentence..
Hope this help someone..

Nice guide, thanks!!

I needed some help with mounting the system using adb through a batch file.
I use this command
adb -d shell mount -o remount rw /system
But the mounting fails (I have a rooted phone )
pleas help me I know this is off topic

2 possible reasons for this command to fail:
- /default.prop (on the phone) contains the following line: "ro.secure=1". Then you need another boot.img (in fact just a modified ramdisk). look for "unpack-bootimg.pl" or "unpackbootimage" you may find a guide how to do this manually (not too easy). A rooted kernel would also do the trick.
you can check your default prob with this command "adb shell cat /default.prop".
- in some cases mount requires more parameters. try "adb shell mount" and look for the line containing "/system". In front of system is the "device-name". in my case the mount command would look like this:
mount -o remount,rw /block/dev/mmcblk0p24 /system
hope this helps and sorry for answering off-topic questions....

nail16 said:
I needed some help with mounting the system using adb through a batch file.
I use this command
adb -d shell mount -o remount rw /system
But the mounting fails (I have a rooted phone )
pleas help me I know this is off topic
Click to expand...
Click to collapse
you can use busybox and call the binary from the shell
i assume that your device in normal mode ( in home screen)..
here some example..
Code:
su
adb push busybox /tmp/.
adb shell "chmod 755 /tmp/busybox"
adb shell "tmp/busybox mount -o remount,rw /system"
after you type "su" superuser will prompt a request, choose "allow".
glitschi667 said:
2 possible reasons for this command to fail:
- /default.prop (on the phone) contains the following line: "ro.secure=1". Then you need another boot.img (in fact just a modified ramdisk). look for "unpack-bootimg.pl" or "unpackbootimage" you may find a guide how to do this manually (not too easy). A rooted kernel would also do the trick.
you can check your default prob with this command "adb shell cat /default.prop".
- in some cases mount requires more parameters. try "adb shell mount" and look for the line containing "/system". In front of system is the "device-name". in my case the mount command would look like this:
mount -o remount,rw /block/dev/mmcblk0p24 /system
hope this helps and sorry for answering off-topic questions....
Click to expand...
Click to collapse
yes you right glistchi, samsung lock adb root on new firmware on my SG- Note..
And make me flash an older firmware for rooting..

new update

Never mind, got it to work

i want to push same file in data system (/data/data) but my tab is not root. can i??

if from cwm recovery, yes you can.. if from stand by mode (home screen) the answer is no... you need root to make it happen..

i got this error
please help

[HELP!!] Need To Delete Chainfire3D, But Dont Know How!

I installed "chainfire3d" on my phone which is running on jellybean,
when it self-reboot for installing library for "chainfire" it get stuck in android logo
after searching on net i figured out the way of disabling it (but works only one adb shell)
which is :
Code:
cd/system/lib/
sh cf3d_uninstall.sh
.
but the problems are:
Not able to get into recovery mode! As bootloader is locked ?
.
I already "wiped Data/cache"
using :
Code:
fastboot -w
it did wipe all data and cache but / still stuck in android logo ()
.
Ques are,.. :
1. How to get into recovery mode!
2. How to unlock bootloader!
3. Is it possible to get into adb shell using fastboot ?
4. Is their any command for rebooting into recovery mode via fastboot ????
My device is Iconbit Mercury q4 (Rooted)

SOLVED
.
(Device must be rooted, because we need to run ADB SHELL commands !)
.
Steps:
1. Install ADB on your Windows PC
2. Install ADB Drivers ( your device must be Detected by computer, otherwise you wont able to proceed!! )
----->remove battery and then put in again<----------
----->your device reboot itself (i guess)<--------
------>& then it will stuck in Android logo<------------------
(but the ,main thing is YOU CAN STILL ABLE TO USE ADB )
3. Connect your device with PC & then press (SHIFT+mouseRightClick) or simply open cmd ; )
type these command in command prompt :
4. adb devices (hit enter)
1234 iconbit <---- it looks somthing like that.. // If this command not work for you, try to install ADB drivers first !! //
5. su <--- ( this command gives you superuser permission )
----------> now # will appear <--------------
6. cd system <------- Change Directory to system
7. cd lib <------- Change Directory to lib
8. sh cf3d_uninstall.sh <----- it will delete Chainfire3D
------->your device reboot itself<--------------
9. Go to application Uninstall "Chainfire3D"
0. Cheers \../,
.
.
Command:
Code:
adb devices
su
cd system
cd lib
sh cf3d_uninstall.sh

ROM for Moto x style Brasil edition dual sim

i am having Moto X style Brazil edition dual sim Retla 6.0
i have tried many Nougat​ Roms Like AICP ., RR , but none of them detected my Sim Card
plz any one help me and tell me about which Rom i Could flash on This varient
i Shall be very thankful .

I have the same problem @malkuu, have you fixed your phone?

richardtrle said:
I have the same problem @malkuu, have you fixed your phone?
Click to expand...
Click to collapse
Yes i have fixed that

richardtrle said:
I have the same problem @malkuu, have you fixed your phone?
Click to expand...
Click to collapse
Follow this
NOTE: This assumes that you have already setup ADB and Fastboot on your PC.
1- Boot your Android device into TWRP recovery.
2- Select Mount » and then select System from the list of partitions to mount the system partition and then go back.
3- Connect your device to the PC with an authentic USB cable.
4- Open a command window on the PC and issue the following command to pull build.prop file from the device:
adb pull /system/build.prop
The above command will download the build.prop file to your PC in the same directory where your command prompt is running from.
+ Tip: Make a copy of the build.prop file before you edit it so that you’ve a backup of the original file.
5. Open the build.prop file on your PC using the Notepad++ program.
6. Edit the build.prop file and add following lines to the Radio Section (or anywhere for that matter) and save it on the PC after making the changes.
This is the MAIN STEP TO FIXED FOR GET DUAL SIM
ro.fsg-id=emea_dsds
persist.radio.multisim.config=dsds
ro.telephony.ril.config=simactivation
7. Once you’ve saved the edits to the build.prop file, push it back to the device using the following command:
adb push build.prop /system/
8. Now set the correct permissions for the build.prop file with following commands (issue them one-by-one):
adb shell
cd system
chmod 644 build.prop
9. Once you’ve set the correct permission for build.prop file, reboot your device to system from TWRP’s Reboot » System option.
That’s it.

malkuu said:
Follow this
NOTE: This assumes that you have already setup ADB and Fastboot on your PC.
1- Boot your Android device into TWRP recovery.
2- Select Mount » and then select System from the list of partitions to mount the system partition and then go back.
3- Connect your device to the PC with an authentic USB cable.
4- Open a command window on the PC and issue the following command to pull build.prop file from the device:
adb pull /system/build.prop
The above command will download the build.prop file to your PC in the same directory where your command prompt is running from.
+ Tip: Make a copy of the build.prop file before you edit it so that you’ve a backup of the original file.
5. Open the build.prop file on your PC using the Notepad++ program.
6. Edit the build.prop file and add following lines to the Radio Section (or anywhere for that matter) and save it on the PC after making the changes.
This is the MAIN STEP TO FIXED FOR GET DUAL SIM
ro.fsg-id=emea_dsds
persist.radio.multisim.config=dsds
ro.telephony.ril.config=simactivation
7. Once you’ve saved the edits to the build.prop file, push it back to the device using the following command:
adb push build.prop /system/
8. Now set the correct permissions for the build.prop file with following commands (issue them one-by-one):
adb shell
cd system
chmod 644 build.prop
9. Once you’ve set the correct permission for build.prop file, reboot your device to system from TWRP’s Reboot » System option.
That’s it.
Click to expand...
Click to collapse
i did that but it didn't work for me
custom roms like AICP and lineage can't rocognize my simcards
what should i do then?

ehsan_991 said:
i did that but it didn't work for me
custom roms like AICP and lineage can't rocognize my simcards
what should i do then?
Click to expand...
Click to collapse
bro i am also using AICP rom u must edit build.prop correctly like when u add lines under radio section dont forget to add a blank space between radio section and the next section