Picked up my Tablet yesterday from T-Mobile. Connected to the web etc using Wi-Fi because I had lots of software to download. Could NOT get any data with my sim card.
I am grandfathered into a data package with T-Mobile which gives me Unlimited Data for $19.99 plus a voice package. Support told me that for this tablet to work I had to upgrade to their Web Connect package for $39.95 and I would NOT have voice. [because they INSIST voice is IMPOSSIBLE with the Galaxy Tab.] [whatever]
I didn't want to agree to their upgrade because my sim works PERFECT in my Dell Streak 5 .. I believe that there is something wrong with the Gal-Tab. I kept telling them that the internet net was the same in their web connect package, it was just more expensive. They told me I was wrong. So I said .. OK make the change. They did and 12 hours later I still cannot connect.
I contacted them this morning and got them to give me my OLD $19.99 internet package and voice back ..
SO .. Any ideas ?? I even tried changing the APN on the Samsung to the same as on my streak. My streak is epc.mobile.com .. the Samsung had it as epc.tmobile.com
I had an issue with my data when I first got my tab too - the support personnel signed me up for an incorrect data package and all I got was a redirect to a Tmobile page when trying to use the browser (and no data on any other apps).
After talking to Support they changed my data package and voila, it worked.
So what's going on - unfortunately T-Mobile US filters Galaxy Tab's by IMEI. As such, they completely block it from working on any plan other than the data plan built for it. Despite the fact that the tab is technically capable of being a phone, T-Mobile will not allow it on their network.
So your telling me when I get my galaxy tab if I pop in my wifes T Mobile sim it wont work. That is truly annoying.
Instead of getting a new data package I am going to just pay the 10 a month to add mobile hot spot to her phone which will work great (maybe even faster because she has 4G on her phone)
THANKS .. I hate T-Mobile but have been with them for 8 years .. I guess I have just learned to put up with their NONSENSE !!
Since Dell Streak 5 came from AT&T Tmo does not have records and treats it as a smartphone. The same will be true for the Galaxy Tab purchased from AT&T. You will be able to get data and even voice using other Tmo Sim after reflashing proper firmware.
But since these two carriers use different frequencies for 3G you would get only EDGE.
It is hard for us to understand rational for such decisions. It seems that they are loosing Tab sales. Why do European carriers find it profitable while US not?
there is a way to get both voice+data on the tab using a standard t-mobile sim with data+voice. 1-you need to flash an European ROM to get voice and 2-then there is the issue of the IMEI which blocks the tab from accessing the web with a sim that already has data.
the second part cant really be posted as i was already removed by the mods due to rules violations, but it can be done i am using my Vibrants SIM on the tab.
Sounds like someone failed to do their homework. T-mo Tab is suppose to be data-only device and utilizes different APN's with custom modem firmware then smartphones, hence why your SIM would not work. You need to root the Tab, flash Euro firmware, then flash a custom modem. Instructions can be found in the development forum. Also, keep in mind that flashed T-Mo Tab can only get EDGE, no 3G.
AnyMal said:
Sounds like someone failed to do their homework. T-mo Tab is suppose to be data-only device and utilizes different APN's with custom modem firmware then smartphones, hence why your SIM would not work. You need to root the Tab, flash Euro firmware, then flash a custom modem. Instructions can be found in the development forum. Also, keep in mind that flashed T-Mo Tab can only get EDGE, no 3G.
Click to expand...
Click to collapse
That's not correct! You can get 3g data with your T-Mobile sim card with the correct modem. Just use roto-modem switcher
Sent from my GT-P1000 using Tapatalk
I think all our posts can confuse anyone.
The question was about using Tmobile smartphone Sim with the Tmobile Tab.
Let me say this: there is no way to get legitimely both voice and data on Tmo network using Tmo Sim. You can get voice without cellular data, or 3G data with different modem and separately paid broadband service Sim not the smartphone Sim.
I put my Sim card from my MyTouch 4G on the Tablet and phone works n/p but you need to flash a Euro rom! Thats it bottom line! Flash The rom and you will have phone access
My sister got an iPhone and gave her old blackjack II to my mom. My mom has never needed internet for her phone much less knows how to use it, yet AT&T has forcefully added a data plan and refuses to remove it. Is there any way around this?
The blackjack II is running windows mobile 6.1 standard, CE OS 5.2.19208. The phone was unlocked from when we traveled internationally. Is there any way to change the IMEI or regedit to change the identity of the phone? Or change the plan to a pay-as-you-go like what I have on my blackberry?
If you have a contract with AT&T, there is noway to remove data plan. It doesn't depend on the cell phone unit but your contract with At&T. If the 2-yr contract ended, u can definitely remove the data plan.
This phone has been off contract for a long time, so no worries there. AT&T, however, recently started identifying smartphones and automatically tagging on a data plan.
I talked to AT&T, turns out it is possible to change the IMEI and replace it with a dummy code, but my rep said it has the potential to wreak havoc on the phone (no calls, no data, etc.) and he has had some people corrupt their sim and need to get it replaced.
Are there any devs that can give me more info on IMEI swapping?
luckymichael said:
If you have a contract with AT&T, there is noway to remove data plan. It doesn't depend on the cell phone unit but your contract with At&T. If the 2-yr contract ended, u can definitely remove the data plan.
Click to expand...
Click to collapse
Uh, I don't think so. Even though your contract with AT&T has expired, features (such as data, texting, and even the minute plan you're on) are not part of the terms of your contract and the data, specifically, is required on any phone designated as a "smartphone" whether you're in or out of contract.
What I mean by that is you can change your rate plan at any time, add or remove texting plans, change the amount of data you have on your plan, etc, but the contract itself only means that you're agreeing to stay with AT&T for a minimum of two years, phone, features, and everything else notwithstanding.
If you have a smartphone, you have to have data now, period.
(AT&T indirect dealer).
aardvarkr said:
This phone has been off contract for a long time, so no worries there. AT&T, however, recently started identifying smartphones and automatically tagging on a data plan.
I talked to AT&T, turns out it is possible to change the IMEI and replace it with a dummy code, but my rep said it has the potential to wreak havoc on the phone (no calls, no data, etc.) and he has had some people corrupt their sim and need to get it replaced.
Are there any devs that can give me more info on IMEI swapping?
Click to expand...
Click to collapse
On topic:
I'm not a dev by any means, but I do know my way around AT&T's system (and everyone else's, for that matter), so IMEI swapping is relatively easy. However, flashing the IMEI won't do you too much good, because as soon as the phone boots and is connected to AT&Ts system, they know you're using a Blackjack. The OS broadcasts that info itself over the wireless network, and a flag pops up at AT&T if you don't have a data plan on that phone.
Best thing you could do for your mom would be to get her an AT&T PayGo phone similar in looks to a Blackjack (they exist), pop her SIM card in it, and just use that and sell the Blackjack. Avoid that hassle of fighting with AT&T over data. They won't budge.
EDIT: Your REP told you about using a dummy IMEI? That's rather interesting, because even if you put a false IMEI into AT&Ts system, and it takes it, AT&T will still recognize the phone as a Blackjack as soon as it's connected to their network.
Hey S4ers,
So I recently gave my friend my S4 (i337) restored to NB1. She does not have an active data plan, but I figured since I'm giving her the phone, it wouldn't matter too much.
She used to have an unlocked T-Mobile Phone working on AT&T, just running it on the EDGE network.
Anyway long story short, she cannot receive MMS anymore after using this phone. The phone has signal, but does not display E, 2G, 3G, 4G, or LTE. Just the signal bars. So I ordered an unlock code and received it, thinking that if I unlock the SIM that she could get this functionality. I tried the #0111*CODE# method in the dialer and receive an incorrect MMI message. Are there any other methods to unlocking the phone with the code that I have? No root would be ideal, because she has everything all set up on it, but I am open to any suggestions, really. I was wondering if I am going down the correct path in enabling MMS, by unlocking the phone like her old one used to be, or if AT&T needs to be contacted.
FYI, when we set up the phone, we called AT&T to register the new SIM, and provided the IMEI number, is it possible that they turned off any functionality because it was a smart phone without a data plan?
Any help would be appreciated, thanks!
treyvaporizer said:
Hey S4ers,
So I recently gave my friend my S4 (i337) restored to NB1. She does not have an active data plan, but I figured since I'm giving her the phone, it wouldn't matter too much.
She used to have an unlocked T-Mobile Phone working on AT&T, just running it on the EDGE network.
Anyway long story short, she cannot receive MMS anymore after using this phone. The phone has signal, but does not display E, 2G, 3G, 4G, or LTE. Just the signal bars. So I ordered an unlock code and received it, thinking that if I unlock the SIM that she could get this functionality. I tried the #0111*CODE# method in the dialer and receive an incorrect MMI message. Are there any other methods to unlocking the phone with the code that I have? No root would be ideal, because she has everything all set up on it, but I am open to any suggestions, really. I was wondering if I am going down the correct path in enabling MMS, by unlocking the phone like her old one used to be, or if AT&T needs to be contacted.
FYI, when we set up the phone, we called AT&T to register the new SIM, and provided the IMEI number, is it possible that they turned off any functionality because it was a smart phone without a data plan?
Any help would be appreciated, thanks!
Click to expand...
Click to collapse
What carrier SIM is being used in it? Also check your APN settings.
She is on AT&T and the APN is good. We had to get a new micro sim
Hey guys, I just saw a YouTube video that was posted yesterday where the guy shows that after the update he no longer could connect with his Verizon SIM card in the axon 7. Has anybody else run into this? Mine won't be here until Monday but if this is true I'm going to be sorely disappointed. Thanks for your input.
I am on verizon with no additional problems after the update. I am still always roaming, and my signal is the same (more bars but still the same reception). LTE, MMS, SMS, Cdma all work the same.
I'm really glad to hear that. I'm not so sure the guy knew what he was doing either... Lol :silly:
CaptainElwood said:
I am on verizon with no additional problems after the update. I am still always roaming, and my signal is the same (more bars but still the same reception). LTE, MMS, SMS, Cdma all work the same.
Click to expand...
Click to collapse
Quick question for you bud. I currently have the Moto Z-Force, but I want an unlocked phone that I can root and mess around with and unfortunately this phone doesn't have that capability. Would you say this is a great alternative in terms of functionality and specs? Tia
CaptainElwood said:
I am on verizon with no additional problems after the update. I am still always roaming, and my signal is the same (more bars but still the same reception). LTE, MMS, SMS, Cdma all work the same.
Click to expand...
Click to collapse
I second this. No issues on Verizon unlimited plan after update. Always showing roaming also. Mms, sms, calls work as suppose to. All out of the box settings.
Sent from my ZTE A2017U using XDA-Developers mobile app
tolymatev said:
I second this. No issues on Verizon unlimited plan after update. Always showing roaming also. Mms, sms, calls work as suppose to. All out of the box settings.
Sent from my ZTE A2017U using XDA-Developers mobile app
Click to expand...
Click to collapse
I can third it lol no issues here. Mine actually has better signal after update on verizon and sms/mms everything works still no issues anywhere
My VZW situation. Just an FYI post AND how to fix it.
I'm on Verizon, have had my Axon 7 for over a month now. No issues other than not having VoLTE, and the occasional software farts (Using Nova Launcher now). When I initially set-up my phone, I imported all previous apps directly from the Play Store. I should have known not to install the VZW apps that were previously installed on my HTC One M8 (purchased directly from VZW), but in my excitement for the new phone, it skipped my mind. Anyhow, no issues through 9/19. "Verizon" displayed as my carrier, and full access to the LTE network.
Fast forward to 9/20 (post B27 update) when one of the VZW updated automatically (I don't recall which of the 2 apps I had installed), and BAMM, "123456" displayed as my carrier and no more access to the LTE network (3G only). Later that evening, my VZW account showed my number with an "unauthorized, non-VZW device", whereas, before the VZW app update it showed my HTC one M8. I removed the SIM and shut down the phone, re-installed the SIM and re-booted....nada. Tried what seemed to be every permutation of replacing the SIM card, played around with APN settings...no dice.
My feeling is they booted me off 4G LTE once the app recognized I was using an unauthorized, non-VZW device. The steps below solved the issue (Provided by "vzwcdma" via the ZTE Community Forum).
"As for losing LTE connectivity, I've had a similar problem before, both on the A7 and other devices. On other devices, like Motorola devices, I could just boot into the bootloader and clear the modem state partitions via fastboot, but ZTE seems to have disabled that function in the A7's bootloader. So, for the A7, I had to mess around a bit with the modem mode. Download "Network" or "4G LTE Switch" from the Play Store. Open it and scroll down to "Set preferred network type", where it should say "LTE/GSM/CDMA auto (PRL)". There isn't really a set guide for what you have to do, but try switching into LTE-only mode, try hitting "Turn off radio" and "Turn on radio" (not Airplane Mode), maybe try "LTE/CDMA audo (PRL)", maybe turn off radio, switch to LTE-only mode, turn on radio, etc. At some point (I'm not sure what) the phone will reset its modem state, and should re-connect to Verizon LTE (and when it does, switch the network type back to LTE/GSM/CDMA auto PRL.
My Verizon account also shows "unauthorized, non-VZW device". Shouldn't affect anything. I've been using an unauthorized/non-VZW device prior to the A7 with no issues as well."
roseykr said:
My VZW situation. Just an FYI post AND how to fix it.
I'm on Verizon, have had my Axon 7 for over a month now. No issues other than not having VoLTE, and the occasional software farts (Using Nova Launcher now). When I initially set-up my phone, I imported all previous apps directly from the Play Store. I should have known not to install the VZW apps that were previously installed on my HTC One M8 (purchased directly from VZW), but in my excitement for the new phone, it skipped my mind. Anyhow, no issues through 9/19. "Verizon" displayed as my carrier, and full access to the LTE network.
Fast forward to 9/20 (post B27 update) when one of the VZW updated automatically (I don't recall which of the 2 apps I had installed), and BAMM, "123456" displayed as my carrier and no more access to the LTE network (3G only). Later that evening, my VZW account showed my number with an "unauthorized, non-VZW device", whereas, before the VZW app update it showed my HTC one M8. I removed the SIM and shut down the phone, re-installed the SIM and re-booted....nada. Tried what seemed to be every permutation of replacing the SIM card, played around with APN settings...no dice.
My feeling is they booted me off 4G LTE once the app recognized I was using an unauthorized, non-VZW device. The steps below solved the issue (Provided by "vzwcdma" via the ZTE Community Forum).
"As for losing LTE connectivity, I've had a similar problem before, both on the A7 and other devices. On other devices, like Motorola devices, I could just boot into the bootloader and clear the modem state partitions via fastboot, but ZTE seems to have disabled that function in the A7's bootloader. So, for the A7, I had to mess around a bit with the modem mode. Download "Network" or "4G LTE Switch" from the Play Store. Open it and scroll down to "Set preferred network type", where it should say "LTE/GSM/CDMA auto (PRL)". There isn't really a set guide for what you have to do, but try switching into LTE-only mode, try hitting "Turn off radio" and "Turn on radio" (not Airplane Mode), maybe try "LTE/CDMA audo (PRL)", maybe turn off radio, switch to LTE-only mode, turn on radio, etc. At some point (I'm not sure what) the phone will reset its modem state, and should re-connect to Verizon LTE (and when it does, switch the network type back to LTE/GSM/CDMA auto PRL.
My Verizon account also shows "unauthorized, non-VZW device". Shouldn't affect anything. I've been using an unauthorized/non-VZW device prior to the A7 with no issues as well."
Click to expand...
Click to collapse
Good to know! I've had so many phones and this hardware looks so awesome for the price, but of course vzw isn't gonna play nice with it without some work. Looking forward to getting mine
Verizon still working fine for me.
After the b27 update I saw improved signal strength. I'm on page plus mvno. After driving in a fringe reception area, I lost lte,and I showed as roaming. It seemed to be using boost Mobile from what the phones network menus displayed. Axon doesn't have a mobile network setting for 'system b', only auto & home only. Tried both, rebooting each time, no fix. I ended up resetting phone, fixed it all. I then switched mobile network to home only, and hoping that it's done.
PS-after b27 I had to re-enable a couple settings, pinch for screen shot, etc.
Edit: it's now been several weeks with it set to home network only. I daily drive in fringe reception areas and have better signal strength than ever, with any phone/carrier combo. All is great, no more issues. Great phone!
For reference, I'm on page plus mvno, dropped in my activated sim from my old phone into the right-side sim slot for CDMA services. Then set to home only. Done.
Sent from my Axon 7 using XDA Labs
Just wanted to see if anyone else had inputs of post update Verizon service, good and bad... hasn't been a ton of chatter in the last week. I have a phone on its way from the egg, trying to decide if it's worth starting a new sim card with Verizon and dealing with that work around... is getting the number off a display and ordering online still the easiest way to get activated?
Works great on VZW still. Love the phone.
methcat said:
Just wanted to see if anyone else had inputs of post update Verizon service, good and bad... hasn't been a ton of chatter in the last week. I have a phone on its way from the egg, trying to decide if it's worth starting a new sim card with Verizon and dealing with that work around... is getting the number off a display and ordering online still the easiest way to get activated?
Click to expand...
Click to collapse
I'd say that the Axon works just as well on Verizon as it did prior to the update, but with potentially better signal strength though I didn't really have a big issue with that prior to the update so I'm not sure (the T-Mobile SIM does seem to do a lot better post-update...but Verizon has always worked well).
I really doubt you'll have any substantive trouble with VZW on this device, especially if you're willing and able to mess a bit with some of the more advanced settings just in case a problem does arise. Here are the oddities, and I'm trying to list *all* of them!
1. No VoLTE or (I presume) HD calling
2. Voicemail appears to have to be accessed by dialing *86 as opposed to long-pressing the '1' key
3. Roaming icon is present intermittently
4. Data roaming *must* be enabled to ensure consistent and reliable data service
5. Verizon's website won't recognize the device at all in the Account Overview pages (mine still shows the last "approved" device I had with my VZW SIM - an iPhone 6S)
6. MMS *may* require a hack to get the proper APN, though I've had no trouble with this (I'm prepaid though); the hack requires a GSM SIM, so beware of this
7. 1X reception *seems* a tad weak in terms of dBm but functionally it almost seems better than my other Verizon phones (weird!)
8. Carrier label will be either '123456,' '002127' (EvDO only), or (I think?) '31000' when not using LTE (i.e., 1X or 3G). When on LTE the phone should show "Verizon Wireless" as normal
9. A SIM/modem reset may be necessary once in a great while it seems...so it's good to understand how to navigate to the "Phone Information" screen to toggle radio settings...also, I've found just SIM-cycling with a GSM SIM will often fix any connectivity problems as well...and sometimes just rebooting the phone with no SIM at all can help too (or a combo of all the above!)
If you can tolerate the above issues then the phone is great. I really enjoy it. I've found the Verizon side of things to be pretty reliable on the Axon 7, even with my endless tinkering with radio modes and other stuff, which has seemed to get me into (recoverable) trouble a few times.
Most importantly - the endless chatter on various forums that Verizon "blocks" the Axon 7 and other non-approved devices is total bunk. In every case where I've run into an issue it can be resolved on my side - Verizon is doing nothing whatsoever to inhibit the use of the Axon 7 on its network as far as I can tell (notwithstanding activation hurdles, admittedly)...many of the people making such claims seem to be speaking from a standpoint of total ignorance and it's kind of getting annoying, to be honest...it seems like the minute someone has an issue with the Axon 7, some ignoramus gets on the relevant forums/comments and claims that Verizon is "blocking" the device. Total BS IMO.
Good luck! As far as activation is concerned...I'd say it might be best to just go to Wal-Mart and buy a cheap prepaid phone or something (looks like the HTC Desire 526 has a nano-SIM and is only $37.49 on their website)...or maybe a cheap nano-SIM'd Verizon phone off of Swappa or eBay? That's probably what I'd do...But I know neither of those solutions are particularly helpful...VZW definitely makes it a bit of a pain.
flyer_andy said:
I'd say that the Axon works just as well on Verizon as it did prior to the update, but with potentially better signal strength though I didn't really have a big issue with that prior to the update so I'm not sure (the T-Mobile SIM does seem to do a lot better post-update...but Verizon has always worked well).
I really doubt you'll have any substantive trouble with VZW on this device, especially if you're willing and able to mess a bit with some of the more advanced settings just in case a problem does arise. Here are the oddities, and I'm trying to list *all* of them!
1. No VoLTE or (I presume) HD calling
2. Voicemail appears to have to be accessed by dialing *86 as opposed to long-pressing the '1' key
3. Roaming icon is present intermittently
4. Data roaming *must* be enabled to ensure consistent and reliable data service
5. Verizon's website won't recognize the device at all in the Account Overview pages (mine still shows the last "approved" device I had with my VZW SIM - an iPhone 6S)
6. MMS *may* require a hack to get the proper APN, though I've had no trouble with this (I'm prepaid though); the hack requires a GSM SIM, so beware of this
7. 1X reception *seems* a tad weak in terms of dBm but functionally it almost seems better than my other Verizon phones (weird!)
8. Carrier label will be either '123456,' '002127' (EvDO only), or (I think?) '31000' when not using LTE (i.e., 1X or 3G). When on LTE the phone should show "Verizon Wireless" as normal
9. A SIM/modem reset may be necessary once in a great while it seems...so it's good to understand how to navigate to the "Phone Information" screen to toggle radio settings...also, I've found just SIM-cycling with a GSM SIM will often fix any connectivity problems as well...and sometimes just rebooting the phone with no SIM at all can help too (or a combo of all the above!)
If you can tolerate the above issues then the phone is great. I really enjoy it. I've found the Verizon side of things to be pretty reliable on the Axon 7, even with my endless tinkering with radio modes and other stuff, which has seemed to get me into (recoverable) trouble a few times.
Most importantly - the endless chatter on various forums that Verizon "blocks" the Axon 7 and other non-approved devices is total bunk. In every case where I've run into an issue it can be resolved on my side - Verizon is doing nothing whatsoever to inhibit the use of the Axon 7 on its network as far as I can tell (notwithstanding activation hurdles, admittedly)...many of the people making such claims seem to be speaking from a standpoint of total ignorance and it's kind of getting annoying, to be honest...it seems like the minute someone has an issue with the Axon 7, some ignoramus gets on the relevant forums/comments and claims that Verizon is "blocking" the device. Total BS IMO.
Good luck! As far as activation is concerned...I'd say it might be best to just go to Wal-Mart and buy a cheap prepaid phone or something (looks like the HTC Desire 526 has a nano-SIM and is only $37.49 on their website)...or maybe a cheap nano-SIM'd Verizon phone off of Swappa or eBay? That's probably what I'd do...But I know neither of those solutions are particularly helpful...VZW definitely makes it a bit of a pain.
Click to expand...
Click to collapse
#6 might not need the GSM SIM workaround anymore after the B27 update. The + sign shows up for me all the time now, even if I only have a Verizon SIM inserted.
thanks for the list guys, i think i'll give it a shot. i'm going to try to add it as a second line to my wifes plan online. is borrowing a friends imei from a nano phone still the best way to get a new activated sim for this phone?
that 526 is a predaid, will verizon just switch that sim to plan if i call in? or are they different?
---------- Post added at 03:42 PM ---------- Previous post was at 03:18 PM ----------
methcat said:
that 526 is a predaid, will verizon just switch that sim to plan if i call in? or are they different?
Click to expand...
Click to collapse
found this, not sure if this is still the rule...
http://www.prepaidphonenews.com/2016/02/new-policy-may-require-verizon-prepaid.html
"It turns out that Verizon made a policy change effective 1/17/16 that requires Verizon Prepaid Phones to be activated on Verizon Prepaid and have at least $30 in airtime applied to them before they cam be used on Verizon postpaid. A Reddit user posted a copy of an internal Verizon document detailing the new rule:
Effective 1/17/2016, customers who purchase a Prepaid 4G device must activate on a $30, $45, or $60 Prepaid plan and make at least 1 monthly service payment before they are eligible to move the device to a new or active Postpay account .
Device remains locked until first month’s payment is made on their Prepaid plan.
Device is unlocked automatically upon successful first month’s payment and can be used on Postpaid plan (new SIM or SIM swap).
Attempting to use an active Postpay SIM Card with a new 4G LTE Prepaid PIB smartphone prior to making the required monthly payment, hotlines the Postpay MDN (SFO 83643) . The hotline remains until first month’s payment is made.
Customers who activate on the $45 or $60 Prepaid plans and enroll in Auto Pay, receive bonus 1GB data per month.
If account is hotlined:
Data access, outgoing calls, and text messaging do not work.
Text message is sent to smartphone.
*VZW FREE MSG: Phone must be activated on Verizon Wireless Prepaid service and first monthly payment must be made before it can be used with any other service. *
Auto-remark is placed on the customer's account.
*SIM Swap attempted: MDN Hotlined. Phone must be activated on VZW Prepaid service and first month paid before it can be activated as postpaid. *"
methcat said:
thanks for the list guys, i think i'll give it a shot. i'm going to try to add it as a second line to my wifes plan online. is borrowing a friends imei from a nano phone still the best way to get a new activated sim for this phone?
that 526 is a predaid, will verizon just switch that sim to plan if i call in? or are they different?
---------- Post added at 03:42 PM ---------- Previous post was at 03:18 PM ----------
found this, not sure if this is still the rule...
http://www.prepaidphonenews.com/2016/02/new-policy-may-require-verizon-prepaid.html
"It turns out that Verizon made a policy change effective 1/17/16 that requires Verizon Prepaid Phones to be activated on Verizon Prepaid and have at least $30 in airtime applied to them before they cam be used on Verizon postpaid. A Reddit user posted a copy of an internal Verizon document detailing the new rule:
Effective 1/17/2016, customers who purchase a Prepaid 4G device must activate on a $30, $45, or $60 Prepaid plan and make at least 1 monthly service payment before they are eligible to move the device to a new or active Postpay account .
Device remains locked until first month’s payment is made on their Prepaid plan.
Device is unlocked automatically upon successful first month’s payment and can be used on Postpaid plan (new SIM or SIM swap).
Attempting to use an active Postpay SIM Card with a new 4G LTE Prepaid PIB smartphone prior to making the required monthly payment, hotlines the Postpay MDN (SFO 83643) . The hotline remains until first month’s payment is made.
Customers who activate on the $45 or $60 Prepaid plans and enroll in Auto Pay, receive bonus 1GB data per month.
If account is hotlined:
Data access, outgoing calls, and text messaging do not work.
Text message is sent to smartphone.
*VZW FREE MSG: Phone must be activated on Verizon Wireless Prepaid service and first monthly payment must be made before it can be used with any other service. *
Auto-remark is placed on the customer's account.
*SIM Swap attempted: MDN Hotlined. Phone must be activated on VZW Prepaid service and first month paid before it can be activated as postpaid. *"
Click to expand...
Click to collapse
Dang...yeah I think you're right about this. My mistake...ugh I wish they'd just make it easy! In that case I'd say Swappa would be the best route...I've bought a few phones off of there and it's always been a great experience.
What are your APN settings? I'm having issues getting my data to work on Verizon.
Salmonella lolz said:
What are your APN settings? I'm having issues getting my data to work on Verizon.
Click to expand...
Click to collapse
Mine: http://forum.xda-developers.com/showpost.php?p=68263623&postcount=61
So frustrating. Before update used today Verizon in upper left corner. Switched to 123456 after update. Rebooted and it went back. After another reboot it only says 123456 and nothing I do will change it back. And now when I get an MMS hangouts tells me it needs to download it but nothing happens. I never get LTE anymore either.
Edit: not sure what I did but it's back now. Might have something to do with bearer in apn settings being lte.
KyJelly69 said:
So frustrating. Before update used today Verizon in upper left corner. Switched to 123456 after update. Rebooted and it went back. After another reboot it only says 123456 and nothing I do will change it back. And now when I get an MMS hangouts tells me it needs to download it but nothing happens. I never get LTE anymore either.
Edit: not sure what I did but it's back now. Might have something to do with bearer in apn settings being lte.
Click to expand...
Click to collapse
That's #9 in the above list that was posted. Need to cycle the modem state of the device.
so, can someone help me with a little clarification? did ZTE ever actually disable anything regarding Verizon on this phone? i know when people quote the webinar, it sounded like they were going to. i understand that the functionality is basically all still working, but i'm wondering if maybe i'm confused on the terminology.
in this post on reddit, i heard the same thing that has been repeated by some, and i am wondering if i have my band terminology confused. is the cdma part different from the 4g lte part(and that's why it's still working)?, or is sarah just incorrect?
SarahSchmera 3 points 9 hours ago
Axon 7
Doesn't work on Verizon yet. It supposedly has CDMA radios but the radio firmware has them disabled. ZTE can't by law enable the CDMA radios because they didn't get FCC approval for the CDMA radios. They would have to pay for the testing and then resubmit the device to the FCC to get approval before they turned on the CDMA radios through a software update.
And the device doesn't have the firmware for VoLTE, HD calling or WiFi calling on Verizon.
Click to expand...
Click to collapse