Related
I put a phone number down in the notes of my appointment by mobile outlook, and when the reminder pops up, I just want to click and dial the number -- not select it, activate the dialer, then menu>paste and finally dial.
In my old blackberry, all I had to do was enter, 'tel:555-1212' and it would automatically convert it to a link -- click on it and the number was automatically dialed.
Is there an equivalent in WM5?
Also, I noticed that I can't just send ANOTHER text msg to someone in my sent box -- reply sends a message back to ME. Forward has me enter the previous number again. Am I missing something?
Interesting, a friend of mine and myself are also interested in this feature !
mixersoft said:
I put a phone number down in the notes of my appointment by mobile outlook, and when the reminder pops up, I just want to click and dial the number -- not select it, activate the dialer, then menu>paste and finally dial.
In my old blackberry, all I had to do was enter, 'tel:555-1212' and it would automatically convert it to a link -- click on it and the number was automatically dialed.
Is there an equivalent in WM5?
QUOTE]
Try yourself! Tel:5551212
Click to expand...
Click to collapse
sergiopi said:
Try yourself! Tel:5551212
Click to expand...
Click to collapse
Tried it. Doesn't work on my phone. Is it supposed to?
Did you add a space or line feed/return after the telephone number? Mine doesn't create a link until one of those is entered.
That works, thou I thought about something else.
I'm using Pocketbreeze and what would be great would be to be able to call persons you added in the list of persons included "add person..."
like to be able to choose from a list when the notification appears.
Guess that's not possible atm
I think that that has been requested over at SBSH's forums but I don't remember if it was a planned addition or not. However, if Amit responded like he usually does, he will probably add it at some point if he can.
As far as PB, if you have PB set to show the note icon next to appts or tasks, you can tap on the note icon and it will open the preview window. Tap on the link and it will dial as well. No opening your PIM needed.
One other thing, you can also create a direct link to email as in the example below:
MailTo:[email protected]
Whipped up a program here that should allow you to automatically dial from your GV number. The only catch is, I don't have my account switched over yet, so I cant try it myself. You need to install 1 file, then use the program to apply the Google Voice settings. If this program works, please let me know, as well as let me know the optimal values for pause1 and pause2 (will have to experiment a little). To then dial via GV, right click (click-hold) the person in the contacts list and select Dial with Calling Card.
For Windows Mobile Pro, version 5.0 or later
.net 2.0 or greater required
-------
CAB File
[Link Removed]
------
Google Voice Dialer Settings Program:
[Link Removed]
-----
Install Instructions:
1. Install CAB
2. Apply Settings via GVD
3. Reboot
EDIT: It should be noted, pause 1 is the pause between the call and the auto-entering 2, pause 2 is the pause before entering the number. 0 will wait for the send key, and each number after that is aprx 2 seconds. So a 4 would be 8 seconds (4 *2).
techhead89 said:
Whipped up a program here that should allow you to automatically dial from your GV number.
Click to expand...
Click to collapse
What is it exactly?? voice dialing and google?
I just upgrade my Grandcentral today..I'll give this a try and report back....Do I juss need to install the cab or also grab the exe?
edit: just read directions directly below lol I shall report back soon..so glad they added sms
doesn't seem to be work? I install the cab apply the settings (add my number and 1 for each of the other fields) and soft reset. use file explorer to open calling card folder and click on only icon (CallingCard.dll) avail I get the message: There is no application associated with "CallingCard". Run the application first, then open this file from within the application. any help? Something missing in the cab? though I'm far from the expert here
using Raph 800 stock rom if that helps any
tgkdubb said:
doesn't seem to be work? I install the cab apply the settings (add my number and 1 for each of the other fields) and soft reset. use file explorer to open calling card folder and click on only icon (CallingCard.dll) avail I get the message: There is no application associated with "CallingCard". Run the application first, then open this file from within the application. any help? Something missing in the cab? though I'm far from the expert here
using Raph 800 stock rom if that helps any
Click to expand...
Click to collapse
To make calls you have to right click (click-hold) the person in your contacts menu. Think of this as an "extention" to your Contacts application.
S.V.I said:
What is it exactly?? voice dialing and google?
Click to expand...
Click to collapse
The idea is, to make a call with your Google Voice showing in the caller ID, you gotta call GV first, then call out. This allows quick and easy integration.
Another note: If you had a plan from a certain carrier that allowed unlimited calling to one number, theoretically this would enable unlimited anytime calling, anywhere. Just throwing that out there...
I love the concept, but I'm not sure about the implementation. I don't use the default poutlook contacts app, I run pocket informant. Will this add the calling card menu there?
Any chance of making the calling card dial the default option, so that all calls (including calls dialed using the keypad, rather than contacts app) would route this way?
ETA: Just confirmed, this does not work with pocket informant.
gai-jin said:
I love the concept, but I'm not sure about the implementation. I don't use the default poutlook contacts app, I run pocket informant. Will this add the calling card menu there?
Any chance of making the calling card dial the default option, so that all calls (including calls dialed using the keypad, rather than contacts app) would route this way?
ETA: Just confirmed, this does not work with pocket informant.
Click to expand...
Click to collapse
The reason for doing this is to mainly test and see if this approach will work with Google Voice (cant try it myself yet, waiting for feedback). The implementation currently is, like you said, less than optimal, but was the quickest and easiest I could get. I didn't want to wrap up a lot of time if this dosen't work. Can you check, and if it does let me know the minimal values that work for the pauses? I intend to leave this option out on the future versions.
techhead89 said:
The reason for doing this is to mainly test and see if this approach will work with Google Voice (cant try it myself yet, waiting for feedback). The implementation currently is, like you said, less than optimal, but was the quickest and easiest I could get. I didn't want to wrap up a lot of time if this dosen't work. Can you check, and if it does let me know the minimal values that work for the pauses? I intend to leave this option out on the future versions.
Click to expand...
Click to collapse
Sure, I'll just disable PI temporarily so I can use the default contacts app. Give me a few.
Ended up having to uninstall PI, I couldn't find the setting to change the shortcuts back to default with it still installed. Oh well.
Pause of 1 in both instances works fine, actually seems like it could be shorter, but of course 0 doesn't work that way.
You need to insert a # after the contact phone number is dialed. Right now it just sits there and I have to push # manually. (Or wait several seconds and then it goes through without the #)
The Touchtones when dialing the contact number are also probably a bit slower than necessary, but I'm not sure you can change that.
This program plus iDialer make a good combo for dialing out. GVD covers contact lists, and iDialer covers manual dialing.
oooohhh ok...so I just tried it and it calls sprint 411? - Scratch that had to input my number with the GVD tool again...
tgkdubb said:
oooohhh ok...so I just tried it and it calls sprint 411?
Click to expand...
Click to collapse
You put in your Google Voice number in the GVD tool?
When you try to make a call, what number shows up in the phone app as the number it's dialing?
gai-jin said:
You put in your Google Voice number in the GVD tool?
When you try to make a call, what number shows up in the phone app as the number it's dialing?
Click to expand...
Click to collapse
it's showing my GV number now...sometimes it calls like it's checking my messages....and sometimes I can hear it get all the way to the prompt where its asking for the number to dial...then once it attempts to autodial it says the number is invalid....I think I need to play with the pause settings. ok while typing this I've had success...my settings were 1 then 2
1 and 1 worked smoothly for me on several tries. I wonder why 1 and 2 would be needed on yours, the 2nd pause really should be the same across all phones/networks I would think.
Did you press pound manually after the touch tones for the phone number were done?
gai-jin said:
You need to insert a # after the contact phone number is dialed. Right now it just sits there and I have to push # manually. (Or wait several seconds and then it goes through without the #)
Click to expand...
Click to collapse
Second this. Can you modify the program to insert # at the end?
btw, It works pretty good on my TP with pause 1 & 1. Thank you.
outphase said:
This program plus iDialer make a good combo for dialing out. GVD covers contact lists, and iDialer covers manual dialing.
Click to expand...
Click to collapse
As far as I know iDialer doesn't work with google voice (atleast version 0.42).
What do you mean by manual dialing? Do you mean dial GV number + 2 + and actual number?
Ok guys, still working on adding in the #, as well as some other modifications. It's kinda hard working blind, but I hope to have something new here soon. Its also kinda hard doing this coding in VB, when I've never really studied it at all. Language similarity ftw.
techhead89 said:
Ok guys, still working on adding in the #, as well as some other modifications. It's kinda hard working blind, but I hope to have something new here soon. Its also kinda hard doing this coding in VB, when I've never really studied it at all. Language similarity ftw.
Click to expand...
Click to collapse
Thank you. Once you post new cab I'll test it.
I'm familiar with s2u2 but its s2a function doesn't always come up, meaning i cant answer the incoming call.
blackstone dialer doesn't work properly, something about me having an x1a.
What i'd love is to have the s2a feature from this w/o the dialer
http://forum.ppcgeeks.com/showthread.php?t=53599
is this doable or are they inseparable? Or is there a solution out there i dont know about?
Thx.
ps. i also tried Inesoft phone 4 but it replaces the dialer and the contacts screen.
31073 said:
ps. i also tried Inesoft phone 4 but it replaces the dialer and the contacts screen.
Click to expand...
Click to collapse
You can disable the Inesoft dialer, contact screen, call history etc and just use the caller ID function. That's what I do.
PatStone74 said:
You can disable the Inesoft dialer, contact screen, call history etc and just use the caller ID function. That's what I do.
Click to expand...
Click to collapse
Hey can you provide a small tutorial on how to do that? Maybe i didn't explore the options well enough, but didn't find it
PatStone74 said:
You can disable the Inesoft dialer, contact screen, call history etc and just use the caller ID function. That's what I do.
Click to expand...
Click to collapse
I use inesoft phone 4 and am very happy with the caler id function too.
PatStone74 said:
You can disable the Inesoft dialer, contact screen, call history etc and just use the caller ID function. That's what I do.
Click to expand...
Click to collapse
when i had the trial i couldnt find where to disable those function. how do i do that?
Also is there a free solution? Even w/ a dialer if it has similar features to the standard xperia dialer.
Is there a way of showing the time of each call in the call history list?
..when you click on the call you have the duration!
Thanks for your reply, but it was the time of the call, not the duration, that I wanted - e.g. call received at 6:28pm. When I click on a call it simply re-dials the number
itm said:
Thanks for your reply, but it was the time of the call, not the duration, that I wanted - e.g. call received at 6:28pm. When I click on a call it simply re-dials the number
Click to expand...
Click to collapse
Instead of clicking on the call, click the contact card on the right side.
This will list all calls from that number with times.
When I click the contact card to the right of the call details it either:
- does nothing (if the number is in my address book), or
- asks me if I want to add the number to my contacts (if the number is not in my address book).
Is this behaviour configurable to get it to work the way you describe?
May be default config for WM6.5.
I assume you're on WM6.1?
I tested with both calls from address book and not in address book, both gave me times.
Yes I'm on WM6.1. Anyone know if it's modifiable behaviour?
i'm using wm 6.1 stock rom, go to menu then choose call history then you can click contact card and see the date, time and duration for any number even if it is not saved to address book
but when the call is from an unknown number, it will do nothing when I press on the contact card. You can only see the date of call if the call was not received today...
itm said:
Is there a way of showing the time of each call in the call history list?
Click to expand...
Click to collapse
What version of TF3D?
In my stock HTC/ATT Pure,Call History shows contact name/number and time of call.
thks I had the same problem and could not find the answer
chikoo said:
What version of TF3D?
In my stock HTC/ATT Pure,Call History shows contact name/number and time of call.
Click to expand...
Click to collapse
I'm not actually using TF3D - I use SPB Mobile Shell 3. Is that maybe why I can't see call history for numbers which are not in my contacts?
Tired of your old contact list? Want a new T9 dialer? Try out AContact, a fully customizable contact app with a brand new dialer. AContact is the only Contact manager that has a smooth scrollable user interface, so you never have to reach to the top of the screen to switch between tabs.
Features:
* T9 search/dialer pad.
* Customizable screens, mix & match functions you like.
* Adjustable text size, small or big as you wish.
* The only dialer app with full group support for Google account.
* Customizable contact list.
* Three keyboard style in contact list: collapsible bottom keyboard, right side vertical IPhone like keyboard, no keyboard.
* Filterable call history, favorite contact list.
* Delete/Clean call log by contact name or number.
Attached with this thread is a beta version of the next release. We would like to know how everyone think about this.
If you want to install the one from Google's Android Market(previous version), just search "movesti" in android market, then look for AContact.
Very very nice application you have got here. A huge improvement on the stock android interface, and much better than any other contact app I have used, including HTC dialer I would happily buy this on the market when it becomes a fully complete application. The only suggestion/amendment I would make, its to have the android status bar enabled as standard (not full screen mode) I think it may confuse less tech savvy users.
Wuzz3r said:
Very very nice application you have got here. A huge improvement on the stock android interface, and much better than any other contact app I have used, including HTC dialer I would happily buy this on the market when it becomes a fully complete application. The only suggestion/amendment I would make, its to have the android status bar enabled as standard (not full screen mode) I think it may confuse less tech savvy users.
Click to expand...
Click to collapse
Yeah, We thought about this as well. The problem is, on some small screens, there won't be much space left if not in full screen mode. Probably we should set a default value based on the screen resolution of user's phone.
Wow, probably the best I've used.
I think I saw this app a few months ago when it had a blue ui that I wasn't really a fan of and no icon. Whatever the case, this looks and works amazing (and I'm a big fan of applications that you can swipe through like this). And the dialer feels really nice as well.
Great job.
syrenz said:
Wow, probably the best I've used.
I think I saw this app a few months ago when it had a blue ui that I wasn't really a fan of and no icon. Whatever the case, this looks and works amazing (and I'm a big fan of applications that you can swipe through like this). And the dialer feels really nice as well.
Great job.
Click to expand...
Click to collapse
Thanks
Yeah, we posted a while back in the themes forum, asking for some idea of themes. Now this is implemented in the app.
Its a great dialer! However i would like to suggest adding company name in the T9 search fields, and adding it in the contact details which are displayed in dialer screen.
This would be great!
Sent from my Desire HD using XDA App
the_powerhead said:
Its a great dialer! However i would like to suggest adding company name in the T9 search fields, and adding it in the contact details which are displayed in dialer screen.
This would be great!
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
We have plans to add more support for displaying extra information. You would be able to select what information to display together with contact names, company name, email address etc...
removed
SimonVT said:
Looks good. I'd like to suggest having seperate icons for the dialer tab and the contacts tab. Would make it more useful when putting it on the launcher dock.
Other than that, great work!
Click to expand...
Click to collapse
Good idea, will add that in the next releases.
Unusable on froyo dell streak. App will not go to portrait mode. Stuck in landscape.
Would also like clearer dialpad with better contrast
Sent from my Dell Streak
Krad said:
Unusable on froyo dell streak. App will not go to portrait mode. Stuck in landscape.
Would also like clearer dialpad with better contrast
Sent from my Dell Streak
Click to expand...
Click to collapse
Sorry landscape is not supported right now. A lot work need to be done in order to support that.
A (maybe known) bug: When calling to a contact from the dialer screen with a single tap - its calling the first phone number. Its not reading the default (primary) number from contacts database.
the_powerhead said:
A (maybe known) bug: When calling to a contact from the dialer screen with a single tap - its calling the first phone number. Its not reading the default (primary) number from contacts database.
Click to expand...
Click to collapse
When there is no input in the dialer, it shows the recent call log, and if you press the dial button then, it'll call that number in the log, as the dialer assumes you are calling an entry from the call log.
If you input some texts into the dialer, a matched contact list will show up, if you press to call any contact then, it'll call that contact's primary number.
tjandriod said:
When there is no input in the dialer, it shows the recent call log, and if you press the dial button then, it'll call that number in the log, as the dialer assumes you are calling an entry from the call log.
If you input some texts into the dialer, a matched contact list will show up, if you press to call any contact then, it'll call that contact's primary number.
Click to expand...
Click to collapse
I agree - that's a possible behavior. The other way is when I input some text, and there is a match - first check if there's a recent call, and if that's true - offer that number; if false offer contacts primary number.
Anyway this is not the case for me.
Scenario:
Contact with a home and mobile number;
Search for that contact
Dialer offers to dial home number, but the mobile number is set as a primary number.
The primary number is set through Sense.
Sent from my Desire HD using XDA App
the_powerhead said:
I agree - that's a possible behavior. The other way is when I input some text, and there is a match - first check if there's a recent call, and if that's true - offer that number; if false offer contacts primary number.
Anyway this is not the case for me.
Scenario:
Contact with a home and mobile number;
Search for that contact
Dialer offers to dial home number, but the mobile number is set as a primary number.
The primary number is set through Sense.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I see what you mean.
Right now, when you input some digits, what happens is
1. contact display name is searched,
2. contact number is searched.
Your call history is not searched (We should change to include that as well)
For your problem, the primary number dialing, we'll go and find a htc sense see if that happens. Probably there is some difference between sense and google's default implementation.
Anyway, will let you know when we figure that out.
Very nice work indeed!
I hope you can make a version what can totally replace the AOSP stock version - this one is way more superior!
A few additions:
- Add Facebook and Twitter accounts' contacts' images syncing - for now, any other contact than the GMail ones have no image (stock image)
- Add option for special sorting of names, and special name display. Like, here in Hungary, we say "Smith Jonathan" (translated name) instead of "Jonathan Smith" or "Smith, Jonathan". The best would be if it could be controlled by language files. Also, I am going to make the Hungarian language, want it?
- The favorite screen's selection has the good old Android background light-up. Can you remove that?
For now, that's all the problem I've found, but still experimenting around it
fonix232 said:
Very nice work indeed!
I hope you can make a version what can totally replace the AOSP stock version - this one is way more superior!
A few additions:
- Add Facebook and Twitter accounts' contacts' images syncing - for now, any other contact than the GMail ones have no image (stock image)
- Add option for special sorting of names, and special name display. Like, here in Hungary, we say "Smith Jonathan" (translated name) instead of "Jonathan Smith" or "Smith, Jonathan". The best would be if it could be controlled by language files. Also, I am going to make the Hungarian language, want it?
- The favorite screen's selection has the good old Android background light-up. Can you remove that?
For now, that's all the problem I've found, but still experimenting around it
Click to expand...
Click to collapse
Thanks for the suggestions. They are all good ones
* For Facebook and twitter contacts, we still have to invest some more time, but it will be there.
* We already have support for sorting by first & last name, no name display though, we plan to add that very soon.
* We plan to add more language support after we implement themes, it would be great if we can use some help. Could you send a email to us [email protected] so we know how to reach you then.
* what is the " good old Android background light-up"?
Another HTC Sense (maybe) related bug:
I keep my contacts synced with my google account and facebook for htc sense. But in phonebook (people) options I've set the view option - only show google contacts. So the result is I can not see facebook contacts in htc or acontact dialer. Nothings wrong here.
But...:
Let's say I have John A. - a facebook contact
I have also John B. - a google contact.
So I am searching for John from dialer screen.
There's a result - John B.
When I select John B. its calling John A.
It may create some awkward situations
Sent from my Desire HD using XDA App
the_powerhead said:
Another HTC Sense (maybe) related bug:
I keep my contacts synced with my google account and facebook for htc sense. But in phonebook (people) options I've set the view option - only show google contacts. So the result is I can not see facebook contacts in htc or acontact dialer. Nothings wrong here.
But...:
Let's say I have John A. - a facebook contact
I have also John B. - a google contact.
So I am searching for John from dialer screen.
There's a result - John B.
When I select John B. its calling John A.
It may create some awkward situations
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
That looks like a big problem - calling the wrong number.
Could you send us an email [email protected] so we can keep track of this problem.
We don't have facebook access here so can't test it.
For the primary number problem, I have tested it on htc desire, 2.1 android, it's showing two entries for two different numbers. Not sure how to make it one entry. Will try to find other phones to test.