Database Users

vodafone Nederlands, 3G connection problem

I'm looking for some advice concerning 3G connection from vodafone in The Nederlands. Right after putting new simcard into my HD I started getting this annoying:
"dialled...
cannot connect for an unknown reason..."
error every time some application tried to get a 3G connection. So decided to put some new cooked ROM based on 6.5. My old one was almost 1 year old and based on 6.1.
So picked up the new Laurentius en voila, it fixed the problem.
Played around a bit with this new rom and decided to check out the XannyTech Grid 1.2.5. Played around with it for one day. Had to soft reset a couple of times cause of HTC messaging that was freezing everytime it tried to read all the txt messages that I restored plus I played around with different tweaks from Advanced Confing etc.
Anyway after all that I soft-reseted for the last time, started up an Opera and bam... connection error again. Exactly as the one before. Did a hard reset, nothing. Same problem all the time.
Anybody experienced something similar ? What do you think it could be ? Should I upgrade my radio ? My current one is 1.13. I was thinking about upgrading to 1.17 but it's very much dependent on a service provider and place so I'm wondering if there's anybody from Nederlands who could give me advice on that, maybe there's some specific version that is the best for Voda ?
thanks for support

Running vodafone in NL here and have to say im having no problems.
Been running on the 1.14 since it was available and just last week switched to the 1.17 and thats running a bit better than the 1.14.
Also i've been running a lot of roms from this place and never experienced the issue you describe.
Suppose it might be the mix of 1.13 and the rillphone dll's found in the varying roms you tried. Since the radio and rillphone dll need to be compatible and support each others functions this might cause your issues.
So concluding my guess would be to try the 1.17 radio.

Yes, as explained in the Android Thread, Voda NL has trouble with their 3G Network or Internet Connection. http://tweakers.net/nieuws/63198/vodafone-kampt-opnieuw-met-landelijke-storing-datanetwerk.html

What the HELL has this to do with Blackstone ROM development!? Come on.
Please mods, close this.

ok, looks like I should check the voda website next time. I'll upgrade the radio anyway since lots of people say that it works good for them. Thanks for help

motoko said:
ok, looks like I should check the voda website next time.
Click to expand...
Click to collapse
No kidding?
Next topic is about your monthly costs are to high @ Voda?

MOD EDIT
Moved to general discussion forum as not related to rom development

@FallenSpartan
Thank you, I was too fast with my choice of discussion place, will pay more attention next time
@SeniorMembers
Looks like you should get some green tea or a massage, I heard that it helps with stress... but come to think about it I'm not very surprised by your reactions since you're probably dutch...

Dear TS,
Just look at any random dutch techsite or just contact Vodafone...
For example see:
http://tweakers.net/nieuws/63198/vo...et-landelijke-storing-datanetwerk-update.html

Hd2 Telstra ROM 1.72.841.0 (82124)

Hi All
I need some help with my HD2.
Today I upgraded from stock rom to latest as version as on HTC website
I can't recall old version, anyway I am having an issue with this radio version which is 2.07.51.22_2
My exchange activesync keeps disconnecting, so my emails are arriving 3-4 minutes later.
I guess my question is?
Can i go back to older radio version without flashing, or worse case scenario could i downgrade to older rom?
I need some help guys.
Thanks

I am downloading now... Will try when down.

I cannot help you there, but have you tried sending a SMS? did you get a stupid notification of message being sent? I am trying to figure out a way to deactive.... No luck yet, waiting for HTC response

As for the Data sync I have had no issue as yet. I have found it a tad more reliable than 1.49. But I have only done a whole 2 hrs of testing

tmorgan4 said:
As for the Data sync I have had no issue as yet. I have found it a tad more reliable than 1.49. But I have only done a whole 2 hrs of testing
Click to expand...
Click to collapse
What a pain, so yours work ok, do you use activesync with an exchange server?
That's where my problem is.
It disconnects every few minutes, which obviouslyconsumes more battery power.
As for the sms sent notification I dont mid it.
I may downgrade to original rom, is it safe?
Thanks

host12 said:
What a pain, so yours work ok, do you use activesync with an exchange server?
Click to expand...
Click to collapse
Sorry I should have clarified. I link mine with my Exchange 2010 Server. I am getting emails as wanted.
That said I still can't sync SMS. Which is soemthing HTC is looking at and I haven't heard back in a while. I should email them to chase them up.

Hmm, I may try a hard reset tomorrow then.
Thanks

host12 said:
Hi All
I need some help with my HD2.
Today I upgraded from stock rom to latest as version as on HTC website
I can't recall old version, anyway I am having an issue with this radio version which is 2.07.51.22_2
My exchange activesync keeps disconnecting, so my emails are arriving 3-4 minutes later.
I guess my question is?
Can i go back to older radio version without flashing, or worse case scenario could i downgrade to older rom?
I need some help guys.
Thanks
Click to expand...
Click to collapse
Hi there, having exactly the same issue, did you find a solution to this other than changing out the ROM? Greatly appreciate your posts.

Telstra ROMS on HD2 are stuffed!
I've heard from a mate who works in Telstra ROM development that the HD2 images are not fully tested.. and therefore go to market with communications flaws.. eg every time you try and sync your mail or use as a shared internet device it struggles as the radio version is substandard to the rest of the Image.
Do yourselves a favour.. HSPL it... Find one of the wonderful roms that the guys/gals on here do.. and you will love using the hardware you have purchased. The HD2 is so powerful and should not be ruined by Telstra's lame attempt at a ROM.
Seems they have put way more effort into the Android ( desire ) but its still no HD2.

englundm said:
Hi there, having exactly the same issue, did you find a solution to this other than changing out the ROM? Greatly appreciate your posts.
Click to expand...
Click to collapse
Yep fixed it, apologies forgot to post solution for my issue.
After trying reflashing with new ROM, downgrading to old ROM and still having same issue, that's right after downgrading...
It clicked, see I bought device and started using activesync after about 2 months.
Before that, I had an issue with my 3G internet connection not working at all.
Weather updates, internet access, hotmail emails etc.
To fix that other issue I had to create a new internet connection.
By the time I got to use activesync I had a new internet connection, I was not using stock telstra connection.
Therefore to fix on new ROM version I created a new connection, and magically started working up to now with no issues.
And it is true telstra are bloody hopeless at testing pre-releasing ROMs.
If you need more information let me know.
Thanks

Would greatly appreciate any help in two areas:
- firstly my HD2 internet stuff is nor working at present. Clicking many of the BigPond links just brings up IE with wap.telstra.com/wap?..... and ends up just sitting there until timeout. Can you post details for setting up new internet connection that fixed this.
- which ROM did you go to. Hw did you load this. I cannot get my HD2 to connetc to Win7 x64 WMDC. Can't even see any mention of the device in the device mgr, though it did say it saw it at ones stage. Reading numerous posts - seems to be a lot of people having issues in this space..

hylandgj said:
Would greatly appreciate any help in two areas:
- firstly my HD2 internet stuff is nor working at present. Clicking many of the BigPond links just brings up IE with wap.telstra.com/wap?..... and ends up just sitting there until timeout. Can you post details for setting up new internet connection that fixed this.
- which ROM did you go to. Hw did you load this. I cannot get my HD2 to connetc to Win7 x64 WMDC. Can't even see any mention of the device in the device mgr, though it did say it saw it at ones stage. Reading numerous posts - seems to be a lot of people having issues in this space..
Click to expand...
Click to collapse
Ok.. have to say, the wap.telstra addresses are all old and many are discontinued. All those apps are simply web shortcuts that should point to a m.bigpond address.
Firstly.. you need to do a few things..
1) You will need to HSPL your phone- ( like flashing a bios ) I just used the hspl.zip.. Instructions are easy and straight forward, make sure you follow them perfectly.
2) Flash your radio to something better i did the 2.10 ( Again.. instructions need to be followed.)
3) I then had a look and found a rom on the forum ( energy GTX ) which seems to have all i want and is fast.. after you flash it.. reboot it.. and it will autoconfigure to the Telstra network.. and BINGO.. FAST Phone!!

host12 said:
Yep fixed it, apologies forgot to post solution for my issue.
After trying reflashing with new ROM, downgrading to old ROM and still having same issue, that's right after downgrading...
It clicked, see I bought device and started using activesync after about 2 months.
Before that, I had an issue with my 3G internet connection not working at all.
Weather updates, internet access, hotmail emails etc.
To fix that other issue I had to create a new internet connection.
By the time I got to use activesync I had a new internet connection, I was not using stock telstra connection.
Therefore to fix on new ROM version I created a new connection, and magically started working up to now with no issues.
And it is true telstra are bloody hopeless at testing pre-releasing ROMs.
If you need more information let me know.
Thanks
Click to expand...
Click to collapse
Hey there, thanks for this. With the new 1.72 ROM the Telstra inbuild connection set ups seem to work, can browse internet and activesync will connect when I prompt it OK (with 1.49 I had to setup a new connection with Phone line (GPRS) and telstra.wap manually (via the Telstra tech's)). I have two HD2's one running 1.49 (with this manual config) and the other 1.72 with inbuilt Telstra config's - the delay problem u described with email arriving 3 or 4mins later is still happening on 1.72 despite it appearing to connect fine, almost like the message from the exchange server is being ignored. Watching Activesync on the 1.72 when I know there is new email and there is this odd sequence, seems to check and recheck emails 2 or 3 times when just one new email has arrived but doesn't seem to pick up the trigger from the Exchange Server that new email has arrived? Does this delay still happen for you, what connection configuration did you select? Thanks v.much.

I want to know what are the real benefits or improvements on upgrading the ROM on Telstra branded HD2? Because I bought an new, unlocked HD2 from a clearance shop in Melbourne and had been into it for just 2 days. Bening a long time WM user, I got used to it and it really seems to work without any problems at the moment, so does the new ROM brings some dramatic improvements, new and fanastic functions or what? I am not after cosmetic things at all, need to know real benefits comared to old ROM.

rxsoob said:
I've heard from a mate who works in Telstra ROM development that the HD2 images are not fully tested.. and therefore go to market with communications flaws.. eg every time you try and sync your mail or use as a shared internet device it struggles as the radio version is substandard to the rest of the Image.
Do yourselves a favour.. HSPL it... Find one of the wonderful roms that the guys/gals on here do.. and you will love using the hardware you have purchased. The HD2 is so powerful and should not be ruined by Telstra's lame attempt at a ROM.
Seems they have put way more effort into the Android ( desire ) but its still no HD2.
Click to expand...
Click to collapse
Thanks, almost sold on this path at this point given the headaches, was reluctant to head down this HSPL path, is there a good reference for setting up a custom ROM specifically for Telstra's network?

Activesync usually never works with the standard Telstra connection in the HD2 Telstra ROM.
As far as im aware, it is set up to go through a Telstra proxy server, which doesn't allow the Activesync traffic.
You must set up your own stock standard connection to telstra.internet APN. Which bypasses the proxy that they have on their preloaded connection. You will however not be able to use the Telstra internet shortcuts to My Account, BigPond etc, as they require authentication with their proxy server.
So as far as I have found, with the stock Telstra HD2 ROM its a case of either one or the other: your activesync working, or your Telstra links working.

englundm said:
Thanks, almost sold on this path at this point given the headaches, was reluctant to head down this HSPL path, is there a good reference for setting up a custom ROM specifically for Telstra's network?
Click to expand...
Click to collapse
I'd like a response to this too as I'm looking at HD2 Android and need a radio upgrade from for it to run, but don't want to lose Telstra Rural coverage. The HD2 is a great device, but few Winmo6.5 app developments compared to Android or iphone.

telstra HD2 on AT&T

ok so i'm a total newbie at things like this and this my first post/question... i am an att customer from reno nevada i've loved and used HTC phones since the first one came out years ago. i used to have a touch pro 2 aka tilt 2 but fell in love with my buddies HD2 from t mobile. i did some research and found that a telstra HD2 t9193 would work on ATT and get 3g. now i have the phone and i havent the slightest clue what to do. i cant go on the internet and cant customize the phone to me. i can make calls and txt msg but basicly nothing else. now i dont even care really if i get the 3g or not but i want to customize my phone like the quick links and programs and at least use the internet and have things like the weather updates. i cant do any of that.
to sum up i have the phone but alll i can do is make calls and txt msg nothing else,
can some one please walk me through how to set this stuff up and if and when you do assume i'm an idiot or a 3rd grader.

Have you gone into settings/wireless controls and turned on Data Connection?

Chances are he needs to change his APN settings for AT&T.

Well as far as I know the HD2 finds the APN settings. I use a European HD2 on Rogers Wireless, and it found the settings the moment the sim card was installed. But you're right. He should check the APN settings to be sure.

thanks for replying guys so i tried to go into settings>data connection and it gives me a message that 'this connection is pre-configured and cannot be modified.' also that all internet and data goes through telstra internet. and unfortunetely i have no idea what apn settings are or how to change them.
also i got a voicemail from a friend but when i tried to retreive it i got a recorded message about international codes and dialing if that helps you understand whats going on at all

cstepman1 said:
thanks for replying guys so i tried to go into settings>data connection and it gives me a message that 'this connection is pre-configured and cannot be modified.' also that all internet and data goes through telstra internet. and unfortunetely i have no idea what apn settings are or how to change them.
also i got a voicemail from a friend but when i tried to retreive it i got a recorded message about international codes and dialing if that helps you understand whats going on at all
Click to expand...
Click to collapse
The problem I had with leaving the Telstra rom alone was that the ROM itself is so bloated with the provider's extra features that couldn't be used here in the US, that simply tweaking the registry settings to properly setup my phone to the sim-card wasn't enough. I had to download HSPL. Install it on the phone, and ultimately flash a new rom and radio to finally get to where I wanted it to be at. Overall, I am more than happy with the T9193.
You might want to do the same as well, since flashing the ROM will enhance your experience using the phone (Clean install is always better) and flashing a new Radio will give you better frequency management (Better reception with GPS and UMTS).

Any chance you could provide pointers to what ROM and HSPL you used for your Telstra HD2 on AT&T? I'd like to use an HTC stock ROM, but going to their site the ROMs I find say they won't work on my Telstra HD2 (based on SN).

Flash a different ROM.
The reason it doesn't work is because the stock ROM has the APN setup removed, and is preconfigured with Telstra's APN settings. Other HD2 Roms will have Connection Setup available so you can have AT&T's settings loaded.

lots of info in this thread.
the 1st HSPL version works, then most custom roms.

T 9193 running clean and stable with fair battery life
with all the bat. suckers running. See below for specs. Average 1.3 Mbs down. Stream movie or TV on H with no problems.

flash custom
Yes. I am using a Telstra T9193 in CA, had the same issue. Also, most custom ROMs automatically configure the data/connection settings, which is very nice.
~Anastasia~best rom ever. so far
friend'scatdied said:
Flash a different ROM.
The reason it doesn't work is because the stock ROM has the APN setup removed, and is preconfigured with Telstra's APN settings. Other HD2 Roms will have Connection Setup available so you can have AT&T's settings loaded.
Click to expand...
Click to collapse

again thanx guys i really appreciate all the help and the links to more info and i fell good now. ive spent the last 6 hrs reading and learning more. i am going to flash the rom and put a new one on. if you guys could post some links to some good roms i'd appreciate it as well. i think i'm looking for something close to HTCs basic but something that will still work w/ AT&T
also i'm looking to learn how to put HSPL on my phone my version says SPL-1.66.0000 i see on the links how to for other models but i havent found how for this perticular one

i think you have to down grade first by flashing a telstra 1.48 or 1.49 rom.
that should bring your spl down to 1.42.
then you can flash hspl 1 and next the htc generic rom
when i bought my telstra, it came with spl 1.42 and so all i had to do flash hspl 1, then i flashed an oem htc rom.

ok so looking around i found this page on ppcgeeks,,com (wont let me post the real link) and on it it has a hardSPL2 that says it should work with 1.66 i'm still a little confused as to what i'd need to do. is this a good safe thing or not?

oh just saw that the person who created the HSPL2 is a member on here called bepe again though is this a good safe thing? i dont want to screw the phone up

from what i read in the past was that hspl2 doesnt work on telstras hd2. it might have changed since then and i havent kept up on it since ive already flashed mine.
you need to research more to see if that is feasable for the telstra hd2.
http://forum.xda-developers.com/showthread.php?t=668876&highlight=telstra

ennx said:
Well as far as I know the HD2 finds the APN settings. I use a European HD2 on Rogers Wireless, and it found the settings the moment the sim card was installed. But you're right. He should check the APN settings to be sure.
Click to expand...
Click to collapse
Are you able to get 3G on Rogers with a European HD2? I thought the European phone only supported 900 & 2100 HSPA whereas Rogers needs 850 or 1900 HSPA for 3G.

Android Development

Just for everyones info, there is a nice Android subforum inthe HD2 section.
I have been using this Android build (1.5b, too many issues with 1.6b):
http://forum.xda-developers.com/showthread.php?t=736545
Here is a link to the "Android development site" (HD2):
http://forum.xda-developers.com/forumdisplay.php?f=735
And here is a link to the "Android development general question" site (HD2):
http://forum.xda-developers.com/forumdisplay.php?f=743
Hope this all helps a bit, or make it easier to find.

Thank you!

how it works on hd 2 ? i allways wanted to try it .... which.version is best?

Hi, im new to this android flashing thing but i just wanted to know, do ALL the android builds listed work with TMobile HD2?
Thanks.

Lahnas said:
Hi, im new to this android flashing thing but i just wanted to know, do ALL the android builds listed work with TMobile HD2?
Thanks.
Click to expand...
Click to collapse
Same here, how will it work with my Tmobile hd2?

djtrace said:
Same here, how will it work with my Tmobile hd2?
Click to expand...
Click to collapse
Good morning guys, I'm a newbie with using Android Roms, but I've been really impressed with running Android the setup in my signature. That being said, in my area, when my T-Mobile data connection is disabled, the device freezes and the battery must be pulled. If I disable cell data, and only use wireless, then the phone works really well. The really nice thing about using the Android Roms so far is that they are stored on a storage card, so you can easily get back to Windows mobile if you want to. Good luck!

wlhaman said:
Good morning guys, I'm a newbie with using Android Roms, but I've been really impressed with running Android the setup in my signature. That being said, in my area, when my T-Mobile data connection is disabled, the device freezes and the battery must be pulled. If I disable cell data, and only use wireless, then the phone works really well. The really nice thing about using the Android Roms so far is that they are stored on a storage card, so you can easily get back to Windows mobile if you want to. Good luck!
Click to expand...
Click to collapse
Ok, so they do work with tmobile then? Is that what you're trying to say?

Ok, I wasn't clear with my previous post. If I have T-Mobile data enabled and wireless enabled as well, when I lose my work or home wireless connection, and the phone tries to reconnect to t-mobile data, the phone freezes hard. So, I have t-mobile data disabled, and I've been using wireless exclusively. I hope to work through resolving the issue in the coming week.
sent by HTC HD2

Nexus One
I'm running the lastest Nexus one android using Cookies Energy Rom for the windows side. also updated the radio to the 2.12 all is good so far no robot voice no freezes. the best one yet

All the android roms are safe to use as far as I know, they all reside on the sd card and are not flashed to the phone. f there is a problem with one (lock ups etc) the battery then can be removed, reinserted, and the phone repoted into windws. Radio 2.12.50.02_2 is recomended, which can be downloaded in the radio section (first post). (T-Mobie USA HD2 ROM Development).

I been using one for 4 days now and like it!! info in sig

hellllppppppp
I have the core cell rom on my hd2 and installed the desire version of android, everything seems to work fine but i cannot hear any phone calls and callers cannot hear me, any fix for this?

Hi , can you please point me to the radio and nexsus one build links. I'm a newbie so I can't figure out which rom to use,.
I feel a little better after seeing that nexsus one build is running without any problem.
Please post the links.

[Build]Android 2.2 Build FRG33 [ mccm v1.5]and new build[mccm SE 1.0](16.9.2010)
praneeth236 said:
Hi , can you please point me to the radio and nexsus one build links. I'm a newbie so I can't figure out which rom to use,.
I feel a little better after seeing that nexsus one build is running without any problem.
Please post the links.
Click to expand...
Click to collapse
I ran across this. May be what you are looking for:
http://forum.xda-developers.com/showthread.php?t=773790

Thanks for the reply. Now I was trying to flash it..............

hi , thank you guyz, you are helping newbies like me alot.
Thanks .

Is there any android that runs with spl 2.08 and radio 2.10.....
which doesn't give me a robotic voice while calling.
I tried 3-4 builds but was not able to figure out the problem. Is it the hardware software conflict or something else. I want to use android on my hd2 desperately.
Please help me guyzzzz...............
Thank you

praneeth236 said:
Is there any android that runs with spl 2.08 and radio 2.10.....
which doesn't give me a robotic voice while calling.
I tried 3-4 builds but was not able to figure out the problem. Is it the hardware software conflict or something else. I want to use android on my hd2 desperately.
Please help me guyzzzz...............
Thank you
Click to expand...
Click to collapse
I am not an android expert, but from what i undrstand the correct radio to se for android is 2.12.50.... Look uder the radio thread to download it.
My favorite android builds so far are here:
http://forum.xda-developers.com/showthread.php?t=736545
I like htc sense.
There also seems to be an issue with the newest roms (build 3.14) and the issue that the voice in the calls sound robotic.
I am sure it all will get resolved soon.

I have 3.14 radio installed and have no issues with robotic voice as long as I run clrcad or whatever it is just waiting on nand. There are great Rome out there just have to test the waters for yourself. All suk battery life compared to WM
Sent from my HTC HD2 using XDA App

Hello everyone, I hope I'm posting this in the right location so here goes. I came across a VERY good android Rom. Just follow the instructions from the site and you'll be one happy camper.
http://www.jayceooi.com/2010/10/14/download-mdeejay-froyo-sense-2-2-1-frg83-android-rom-for-htc-hd2/
Enjoy.. this one FINALLY works

[Q] Can't get 3G or GPS working on HD2 running Android 2.3 NAND

Hi everyone!
This is my first post on XDA, but I've been referring to it a lot lately and have to say that it is a great community.
I am hoping that someone can help me with my HD2 problem. I initially tried running an SD version of Android 2.3 on my HD2, it was great but I had no working 3G or GPS. I thought this was to do with the ROM build, and started to look for a new one to try out.
It was at this time that I learnt about NAND. Since then I have installed HSPL 2.08, MAGLDR and flashed MDJ's CyanogenMod 7 (v. 2.6) A2SD+. This is a ROM of Android 2.3.2. Note that before I did this I had Radio version 2.15.50.14, which I believe to be correct (for the reason of needing 576MB RAM).
Everything is now running great on my NAND Android except for 3G and GPS. I don't have the option for enabling 3G in the 'wireless & networks' menu, which I should.
I've searched around but all I can find is people saying that before you flash Android you must ensure you have a radio that is compatible with 576MB RAM. Correct me if I am wrong but I believe that Radio 2.15.50.14 is 576MB compatible.
The fact that I have no 3G AND no GPS does suggest that the radio may be incorrect (from what I know about them), but I don't know for sure. Can anyone help me out here?
I don't know if this info will help or make a difference to which radio I should use, but I am on O2 UK.
Thanks in advance to anyone who can offer any help! It is much appreciated!

have you made sure the o2 apn settings are correct ?

I am not familiar with O2 in the UK but since there is also T-Mobile in the UK, I am assuming that O2 is a competing SIM card carrier similar to ATT in the US for me. And if so, then I would think that O2 only can give you EDGE and not 3G. That is what happens when I try my HTC HD2 on ATT. Unless I am on T-Mobile, all other GSM carriers will only give me EDGE and not 3G. In regards to not obtaining GPS lock, I think it could be caused by the build you are on. Many of the builds are optimized for the location of the developer. I would then change your gps.conf file in your build to optimized GPS lock for you in the UK. Here is a link to the thread to help you change the gps.conf file on your phone:http://forum.xda-developers.com/showthread.php?t=953630

APN settings
Richy99 said:
have you made sure the o2 apn settings are correct ?
Click to expand...
Click to collapse
Hi. Thanks for quick reply. I can go into my 'Access Point Names' menu, in 'Settings' > 'Wireless & networks' and can see multiple choices there. Seven of the options are for O2:
O2 UK (mobile.o2.co.uk)
O2 UK (mobile.o2.co.uk)
O2 UK Postpay MMS (wap.o2.co.uk)
O2 UK Prepay MMS (payandgo.o2.co.uk)
O2 MMS Postpay (wap.o2.co.uk)
O2 MMS Prepay (payandgo.o2.co.uk)
O2 UK MMS (idata.o2.co.uk)
I have no idea why some of them are identical or why there are so many for O2. However, I would have thought I should choose either of the top two, as I am on an O2 contract. If i select one of the top two then I can see the settings for that APN. The settings I can see that have values are:
Name, APN, Username, Password, MCC, MNC and APN type.
Should it be as simple as selecting an APN from the list or is there normally customisation required?

slbenz said:
I am not familiar with O2 in the UK but since there is also T-Mobile in the UK, I am assuming that O2 is a competing SIM card carrier similar to ATT in the US for me. And if so, then I would think that O2 only can give you EDGE and not 3G.
Click to expand...
Click to collapse
Hi. Thanks, that looks like something I need to find out for sure, although my 3G worked fine when I was running WM6.5 on O2, it was only when switching to Android that the problems arose. When I had the SD card version of Android I could go back and forth from WM6.5 to Android and would have 3G work in WM but not in Android, every time.
The good point about the SD card method was that if I ever really needed 3G I could easily reboot and use WM6.5, but of course now that I have a NAND version of Android I cannot do this, and so I am pretty keen to try and fix the problem so that I can use things like Google Maps when I am out and about etc.
Thanks again.

porcupine24 said:
Hi. Thanks, that looks like something I need to find out for sure, although my 3G worked fine when I was running WM6.5 on O2, it was only when switching to Android that the problems arose. When I had the SD card version of Android I could go back and forth from WM6.5 to Android and would have 3G work in WM but not in Android, every time.
The good point about the SD card method was that if I ever really needed 3G I could easily reboot and use WM6.5, but of course now that I have a NAND version of Android I cannot do this, and so I am pretty keen to try and fix the problem so that I can use things like Google Maps when I am out and about etc.
Thanks again.
Click to expand...
Click to collapse
Doing a Google search it looks like O2 can give you 3G provided you have the proper APN settings. The different choices you listed will be based on what type of O2 plan you are using. Here is a link to a suggested APN setting if you are on the postpay MMS plan: http://androidcommunity.com/forums/f41/o2-uk-postpay-mms-internet-apn-settings-18558/
Suggested settings for payandgo plan 3G:http://androidcommunity.com/forums/f41/apn-settings-for-3g-and-mms-on-o2-payandgo-17625/

Partial success!
slbenz said:
Doing a Google search it looks like O2 can give you 3G provided you have the proper APN settings. The different choices you listed will be based on what type of O2 plan you are using. Here is a link to a suggested APN setting if you are on the postpay MMS plan:
Click to expand...
Click to collapse
Hi. Thanks for the info and link. I tried the settings mentioned in the first link you provided and it worked! Brilliant! After I had input the new settings I had to go to 'Mobile networks' and re-tick 'Data enabled'. I now have a little 'G' icon in the status bar with an incoming and outgoing arrow above it and can browse web pages again! Ahh mobile connection, I have missed you!
By the way, that G icon, I've just Googled it and it seems it represents a GPRS connection, which is slower than EDGE. I have to say, this new connection is very slow (not that I'm complaining too much). Does this make sense to anyone? On the post I got the settings from (linked to above - I can't add URL's to posts yet as I'm a new user) I noticed that the users are saying that the settings will get 3G working, there was no mention of GPRS. Do you think my phone is defaulting to GPRS becuase it can't get 3G working?
Thanks!

I have exactly the same problem on orange. worked fine on wm6.5 but once i flashed android have had a night mare finding 3g coverage, but alot of ppl have 3g coverage on a nand android been trying to figure out why cant i, i also have that G but its really slow internet and cant talk on pingchat etc, gonna ring orange tomorrow n see if they can fix it/give me correct settings.

Hi Guys go into mobile networks and look for use only 2g networks and uncheck that box

yrrab said:
Hi Guys go into mobile networks and look for use only 2g networks and uncheck that box
Click to expand...
Click to collapse
thats always unchecked cheers anyways mate....
I posted it on the thread of the rom i use and some1 posted this....
truckerdewd said:
It's your sim card. Had the same issue in the fall and it was my sim card. You are supposed to have them changed out every 2 years
Click to expand...
Click to collapse
not sure if its correct or not but am going to give it a try

It seems to be working...
yrrab said:
Hi Guys go into mobile networks and look for use only 2g networks and un-check that box
Click to expand...
Click to collapse
My 2G network option was always unchecked, but thanks for commenting anyway.
I seem to have a pretty much fully working connection now. I had the G icon (GPRS) when at work the other day, but once I went home I managed to get an E icon (EDGE), which was much faster. I don't know if I'll be able to get any faster than that (i.e. 3G or HSDPA), as I am assuming that is partly to do with my settings but also partly down to geographic location and coverage etc. But at least I have something now, I am very grateful for that much
In addition, my GPS seems to be working too (I started this post of with neither GPS nor my mobile networks working). It takes some time to get a lock on me, but it gets there after a few minutes. Fantastic!
Thanks so much to everyone who posted comments, I appreciate them all
I hope you get your problem sorted, LaneyEFC. I'd definitely recommend getting the APN settings from your network provider, my problems went once I got that step right!

gprs hd2 android
hello
have you find a solution to use mobile network ?
thanks
porcupine24 said:
Hi everyone!
This is my first post on XDA, but I've been referring to it a lot lately and have to say that it is a great community.
I am hoping that someone can help me with my HD2 problem. I initially tried running an SD version of Android 2.3 on my HD2, it was great but I had no working 3G or GPS. I thought this was to do with the ROM build, and started to look for a new one to try out.
It was at this time that I learnt about NAND. Since then I have installed HSPL 2.08, MAGLDR and flashed MDJ's CyanogenMod 7 (v. 2.6) A2SD+. This is a ROM of Android 2.3.2. Note that before I did this I had Radio version 2.15.50.14, which I believe to be correct (for the reason of needing 576MB RAM).
Everything is now running great on my NAND Android except for 3G and GPS. I don't have the option for enabling 3G in the 'wireless & networks' menu, which I should.
I've searched around but all I can find is people saying that before you flash Android you must ensure you have a radio that is compatible with 576MB RAM. Correct me if I am wrong but I believe that Radio 2.15.50.14 is 576MB compatible.
The fact that I have no 3G AND no GPS does suggest that the radio may be incorrect (from what I know about them), but I don't know for sure. Can anyone help me out here?
I don't know if this info will help or make a difference to which radio I should use, but I am on O2 UK.
Thanks in advance to anyone who can offer any help! It is much appreciated!
Click to expand...
Click to collapse