Install this cab for a faster boot.
It seems, that this file is no longer on that link. Can you please reupload this file?
One question: What does mean, that it disable SMS sent message?
What is:
"- Start clean for a faster boot"
Sounds intriguing.
Is it possible to get a cab just for this?
the link does not work
Are people really prepared to install a cab posted by a new forum user who includes no description or source information about it?
.void said:
Install this cab for a faster boot.
Click to expand...
Click to collapse
I can't trust a cab file posted without any clear description or source information by a new user...
Ladies and gents, would one of you mind sharing a working erv file from your kitchen? I've attempted to build my first Leo ROM and it won't get past the customization. I would like a reference to compare my build to. I don't need a full kitchen, unless you want to share, just the erv to build it.
Thanks guys
silentP
there's already a kitchen thread for this. do a search!
zenkinz said:
there's already a kitchen thread for this. do a search!
Click to expand...
Click to collapse
-nevermind, it's pointless
the erv may vary due to differ packages u may have. so it also pointless.
what problem u hv?
monx® said:
the erv may vary due to differ packages u may have. so it also pointless.
what problem u hv?
Click to expand...
Click to collapse
monx, thanks. The ROM boots and shows the splash screen. It goes to the RunCC and stops. It never finishes or reboots. If I soft-reset, it begins the customization process and hangs. I just wanted to compare what someone else had. I don't want the whole kitchen. I'm using the kitchen here: http://forum.xda-developers.com/showthread.php?t=624672
u need to recmod NTConfig.dll from Notification enhancement. use the NTConfig.dll file. delete the modules.
monx® said:
u need to recmod NTConfig.dll from Notification enhancement. use the NTConfig.dll file. delete the modules.
Click to expand...
Click to collapse
Thank you for taking the time to help. I'll try it.
Respectfully
I am having issues running edited dll files on my standard rom. No matter what i do, i cannot use files that i have edited. They work just fine on custom roms. However i can run other modded files like Brians taskbar. Can some please sign the attached file and re attach ?.
Signed with new certs.
Make sure you are installing the newsdkcerts first attached
NilsP said:
Signed with new certs.
Make sure you are installing the newsdkcerts first attached
Click to expand...
Click to collapse
NilsP, thank you it worked..However it does not solve my problem. can you please do one more thing for me as i experiment a little. I have attached 2 more files for signing. It would be great if you can do those.
Also can you attached the tool and the certs you are using to sign them please. For the life of me i get not understand why it does not work for me....I have done all the research and followed the correct process but no cigar so far...thanks for your help.
Here you go
Thanks mate.... Any chance of the sign tool ?
ghosty7 said:
Thanks mate.... Any chance of the sign tool ?
Click to expand...
Click to collapse
Check the reply to your PM
Works like a charm....thanks very much for that
I apologize if this has been covered, but I can't find specific info with my search terms.
I'm cooking for Rhodium, WVGA, WM 6.5.x sys 21682. My base ROM is ATT's stock august 30th 2010 ROM. Using OSKitchen Zero, latest release.
Basically, I can't get any version of sense to work. I've tried cooking 2016, 2018, and 2019, and can't get any of them to work. The problem is that when I try to import the EXT packages with OSKZ, I get an error stating: "The OEM package you've selected doesn't seem to be valid..."
So, I thought maybe it was just being strange. So I placed the packages manually into the kitchen and tried to build the ROM and platform builder would hang and I'd have to cancel the process.
Any tips tricks or ideas?
Thanks a lot!
Smith
Where are you sourcing your sense files from?
Have you got the additional dependencies covered (ie starticonloader?)
crazyC said:
Where are you sourcing your sense files from?
Have you got the additional dependencies covered (ie starticonloader?)
Click to expand...
Click to collapse
I'm not sure what you mean by sourcing exactly, but on my PC they're located on my desktop, and I've also tried placing them straight into my kitchen without using the GUI to do it.
I got the files from a post here on XDA.
Yeah, I believe I have all the additional dependencies as well.
I've been reading and it looks like I have to modify the app.dat file and some other files?
Regards
Smith
smithisize said:
I'm not sure what you mean by sourcing exactly, but on my PC they're located on my desktop, and I've also tried placing them straight into my kitchen without using the GUI to do it.
I got the files from a post here on XDA.
Yeah, I believe I have all the additional dependencies as well.
I've been reading and it looks like I have to modify the app.dat file and some other files?
Regards
Smith
Click to expand...
Click to collapse
OK so you got them from XDA - as I am assuming you are not using the At&T standard ones. (that was what I meant).
The ones I got from XDA were already CFC'd and were already in EXT format not OEM and so did not need any importing as such, just copying into the directory.
I did not need to modify anything - cannot remember the thread I got them from tho.
I will try and have a look, but my kitchen is now such an amalgamation of packages that I couldn't be sure where it all came from.
Ahhhh ok, i was confused because it says's import, ext package then it asks for an oem location.
Ok, with that cleared up, place straight into kitchen, gotcha. How many dependencies are there, can you recall? I think i have them all but I want to make sure.
Thanks a lot!
Regards
Smith
Edit:
No go, but here's the error (attached in the pic)
You've got files inside of modules. You need to clean your modules up.
Farmer Ted said:
You've got files inside of modules. You need to clean your modules up.
Click to expand...
Click to collapse
Alright, is there any reading I could do to help me figure out what to clean and what to keep?
Thanks
Smith
Try looking inside the corrupt modules, then look in some clean ones, and figure out what doesn't belong. It should be obvious.
Someone else is just going to tell you the answer, but you're better off figuring it out yourself.
Farmer Ted said:
Someone else is just going to tell you the answer, but you're better off figuring it out yourself.
Click to expand...
Click to collapse
Couldn't agree more. I'll check it out.
Thanks for the info, much appreciated!
Regards
Smith
Edit: one last question. It's killing me finding all the WVGA dependencies for this package, they're all vga is appears. This is what I'm using: http://forum.xda-developers.com/showthread.php?t=797602
and when it lists the "required packages" when I download it it's labled VGA, not WVGA, and I think that'll be a problem. Will it?
Right, cooking sense is not my strongest point so I will probably leave it to others to take it further, but
Modules vs files - you need one or the other I think. Look up recmod and reversemod.
I just used a set of Manila files uploaded and CFC'd by someone from the latest official LEO ROM.(By Patensas I think) and maybe updated the HTC framework as well.
crazyC said:
Right, cooking sense is not my strongest point so I will probably leave it to others to take it further, but
Modules vs files - you need one or the other I think. Look up recmod and reversemod.
I just used a set of Manila files uploaded and CFC'd by someone from the latest official LEO ROM.(By Patensas I think) and maybe updated the HTC framework as well.
Click to expand...
Click to collapse
Alright, so I've figured out which packages I need to recmod and have done so. I haven't found those leo files yet, but I'm looking. Just got home. I'll post back when I see how that goes!
Regards
Smith
I have never had to recmod any of the sense files.
What you need to do is delete the files (ie the .dll) within the module. The kitchen will use the module to create the file on the device, it does not need the file as well. Hence the kitchen is giving the warning.
I think.
Hi, just re read your first post.
Could you confirm you have done the following:
Dumped the ATT base rom and rebuilt using just that with the EXTs that came from it, flashed it, and checked it worked? (So you should have had a working Sense in that) as per the Oskitchen instruction set?
If there have been problems with that, try ticking the box next to recmod on the Phone Canvas Enhancement package. I think there was an issue with the ATT ROM around this.
crazyC said:
Hi, just re read your first post.
Could you confirm you have done the following:
Dumped the ATT base rom and rebuilt using just that with the EXTs that came from it, flashed it, and checked it worked? (So you should have had a working Sense in that) as per the Oskitchen instruction set?
If there have been problems with that, try ticking the box next to recmod on the Phone Canvas Enhancement package. I think there was an issue with the ATT ROM around this.
Click to expand...
Click to collapse
Yeah, I did that. Here's the weird part though. That worked the first time. But after having all these difficulties, seeing as I haven't made much real progress, I rebuilt my kitchen. Then it wouldn't work. I would get the exact same runtime error, eventhough it worked before and I've installed all the libraries.
So, as of now the problem lies somewhere with my kitchen. I'm trying to troubleshoot it right now.
Any ideas as to why that might be? I've tried the FAQ's in the OSK thread and haven't fixed the problem :/
Regards
Smith
No sorry.
I had some kitchen problems when upgrading from oskitchen 1.32 (tried to completely reorganise my EXTs at the same time and it went horribly wrong), so went back to 1.32 to sort it out and will upgrade in due course.
If platform rebuilder crashes during the build then you dont need to waste time flashing.
Disable all EXTs and build and then add them in blocks till you identify what is causing the crash.
If it crashes with no EXTs then try the original sys, and if no joy reimport the rom?
Are all the recommended packages ticked for Recmod?
smithisize said:
Alright, so I've figured out which packages I need to recmod and have done so. I haven't found those leo files yet, but I'm looking. Just got home. I'll post back when I see how that goes!
Click to expand...
Click to collapse
I can't help you on Sense, as I don't use it, but why would you recmod anything? That's a bad idea. If you have a 6.5 kernel, use it.
crazyC said:
No sorry.
I had some kitchen problems when upgrading from oskitchen 1.32 (tried to completely reorganise my EXTs at the same time and it went horribly wrong), so went back to 1.32 to sort it out and will upgrade in due course.
If platform rebuilder crashes during the build then you dont need to waste time flashing.
Disable all EXTs and build and then add them in blocks till you identify what is causing the crash.
If it crashes with no EXTs then try the original sys, and if no joy reimport the rom?
Are all the recommended packages ticked for Recmod?
Click to expand...
Click to collapse
Actually recmodding ATT Phone Canvas fixed the problem.
I was able to generate the ROM image with sense 2017 cooked in, but sense won't launch now. "Tap to Start Sense" so I'm double checking dependencies, exe and dll files as we speak.
Thanks a lot for all the help!
Regards
Smith
So i got sense 2017 to at least load. now, however, none of the softkeys work, and tapping on a message in the message tab doesn't work.
So far so good. lots of learning to do yet, but I'll get there.
Thanks a lot for al the info!
Regards
Smith
Alright, I can't get sense to work again lol. It just kinda stopped, eventhough I'm using the same packages for manila and its dependencies.
Any ideas?
Regards
Smith
Does anyone know how to cook sense with old kitchen style(build os) for Omnia II?
Thanks in advance
hi every body
can someone please give me some advice .i want to disable auto time synchronization before cooking the leo rom.can you please tell me how can i do this.thanks.and i wish you all very happy new year.
Code:
;disable auto time sync
[HKEY_LOCAL_MACHINE\Software\HTC\TimeZoneAutoFix]
"CreatePDPAlways"=dword:00000002
"WarnAlways"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Microsoft\Clock]
"HomeDST"=dword:00000000
"AutoDST"=dword:00000000
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"NITZEnable"=dword:00000000
HD2Owner said:
Code:
;disable auto time sync
[HKEY_LOCAL_MACHINE\Software\HTC\TimeZoneAutoFix]
"CreatePDPAlways"=dword:00000002
"WarnAlways"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Microsoft\Clock]
"HomeDST"=dword:00000000
"AutoDST"=dword:00000000
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"NITZEnable"=dword:00000000
Click to expand...
Click to collapse
thanks for reply .where is this in os kitchen please?
master92 said:
thanks for reply .where is this in os kitchen please?
Click to expand...
Click to collapse
Try opening all the reg files in your kitchen and look... You might learn a couple of new things as well if you do that!
ai6908 said:
Try opening all the reg files in your kitchen and look... You might learn a couple of new things as well if you do that!
Click to expand...
Click to collapse
Yup, that works. Also, just use Kheb 1.1 to find registry keys. It's faster and easier than either searching or starting a new thread.
The key is probably in the oem drivers rgu, and it may appear several times.
i swithed to osbuilder lately.
there is a option inside called registry preview.
if you expand the three and select the key you're searching for, it shows wich rgu-files are editing the selected key. very easy. best kitchen i ever used to cook roms.
i already solved some order problems this way. just to let you know.
the keys i wrote about should be simply added as last package after all xip/sys/oem (overwrite any other rgu values).
HD2Owner said:
i swithed to osbuilder lately.
there is a option inside called registry preview.
if you expand the three and select the key you're searching for, it shows wich rgu-files are editing the selected key. very easy. best kitchen i ever used to cook roms.
i already solved some order problems this way. just to let you know.
the keys i wrote about should be simply added as last package after all xip/sys/oem (overwrite any other rgu values).
Click to expand...
Click to collapse
hi thanks for reply can you please tell me where can i download this kitchen, and is it for leo.
master92 said:
hi thanks for reply can you please tell me where can i download this kitchen, and is it for leo.
Click to expand...
Click to collapse
You can make it work for leo.
http://www.mobileunderground.info/showthread.php?t=12348