Signature verication failed. - Epic 4G General

Hi peeps, I'm looking to install a custom kernal like Phoenix 1.49 or Xtreme 1.0 and possibly a custom rom. Everytime I've tried to flash them via Rom Manager/CWM it says Signature Verification Failed. What am I doing wrong. Titanium Backup says I have Superuser access so I believe I still have root. I bought the paid Rom Manager so I could do all this but I am still getting this error. It's really starting to push me towards the edge. I'm off work till the 3rd of January due to knee surgery so I decided to read up on rooting and flashing custom roms and kernels. I have no clue what I am doing wrong. Someone please help me.
Thanks
Tom

Did you use the one click root with clockwork mod? You can't use Rom manager to install clockwork mod while on stock kernel. I'm not sure what steps you have done but you don't have clockwork if u did it thru rom manager

http://forum.androidcentral.com/epic-4g-roms-hacks/42178-rooting-ultimate-guide-v1-0-2-a.html
This is the link that I followed to root. If I'm not supposed to post this on here I apologize. But if you have the time to check this through I would greatly appreciate it.
Tom

You cannot use ROM Manager to flash anything while using the stock kernel. Perform the following steps to boot into ClockworkMod Recovery.
1. Turn off your phone.
2. Hold down VOL DOWN + CAMERA + POWER
3. You should be in ClockworkMod Recovery (Green Text)
4. Flash Phoenix/Xtreme kernel.
5. Reboot
Now you can use ROM Manager to flash anything.

When I do that all that comes up is
Reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition.
Nothing about my kernel on my sdcard. Does it not have to be in a zip folder or something?

Oh, you never installed ClockworkMod Recovery, which is a requirement to flash 3rd party mods.
Read this: http://forum.xda-developers.com/showthread.php?t=770388

Followed it and still the same thing

I was getting this error when I first got my epic and it was because I was booting into stock recovery (red text). Make sure you are in Clockwork Recovery (green text) as mentioned above by holding Vol down, Camera, and Power when your phone is off. Hope this helps.

That's exactly what I wasn't doing I was just rebooting from Rom Manager Manually lol. My noob mistake. I have it working and installed BakedSnack 1.6 rom any feedback on this rom or is there a better rom/kernel combo that I should use?

tphillips78 said:
That's exactly what I wasn't doing I was just rebooting from Rom Manager Manually lol. My noob mistake. I have it working and installed BakedSnack 1.6 rom any feedback on this rom or is there a better rom/kernel combo that I should use?
Click to expand...
Click to collapse
It's all about what you prefer. I used one of the new odin updates to install dk28 and flashed Mammon's rom and have been loving it especially after applying the gingerbread theme. I'm so content with it I don't plan on flashing anything until they get cyanogenmod or a ported gingerbread out.

sprice5 said:
It's all about what you prefer. I used one of the new odin updates to install dk28 and flashed Mammon's rom and have been loving it especially after applying the gingerbread theme. I'm so content with it I don't plan on flashing anything until they get cyanogenmod or a ported gingerbread out.
Click to expand...
Click to collapse
I'm looking for an elegant type of look. Maybe some text icons or something along those lines. Got any Screenshots of yours I could look at?

tphillips78 said:
I'm looking for an elegant type of look. Maybe some text icons or something along those lines. Got any Screenshots of yours I could look at?
Click to expand...
Click to collapse
This is with AOSP screen locker and 3d app drawer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Yeah that's pretty sweet I do like that I might have to flash DK28 now so I can get that gingerbread theme. How do I get that AOSP locker. I had that one when I had the Samsung Moment. I liked it. I don't like the epics too much.

tphillips78 said:
Yeah that's pretty sweet I do like that I might have to flash DK28 now so I can get that gingerbread theme. How do I get that AOSP locker. I had that one when I had the Samsung Moment. I liked it. I don't like the epics too much.
Click to expand...
Click to collapse
I'll PM you on how to get it.

thanks
10char

Related

I need a little encouragement, not able to master the rooting

I got the root, took 5 minutes but anything after that, not so good.
I spent all day trying to root, nand, flash and am left with nothing but frustration. I had problems with htc sync, still do. Clockwork recovery won't flash and I can't flash a rom from the sd card or usb cable.
I like to tinker but it just doesn't seem worth it. jailbreaking my iphone was a cinch compared to this. I'm very frustrated because I was looking forward to what a custom rom could provide and to getting froyo early.
Thinking of going back to stock and trying the unrevoked method (can I just apply the unrevoked method or do I have to revert back to stock and then try it?) and if that doesn't work just stick with the root.
What method are you using? What errors or problems are you running into? You need to provide more details in order for anyone to be able to help you. Rooting the Evo and nand unlocking has never been easier (unless you are running the latest OTA).
Edit: You don't need to post multiple threads for the same issue. If you're not get any replies, it's most likely because you didn't provide enough info.
yeah i been trying to get that clockwork to install too i cant find a zip for it or anything. I am rooted but still dont have any idea how to enable su to use the rom manager app. i tried that idiot proof which is missing the link for clockwork. I also tried the the simple root but when i hit the exe i get a error. i had almost no issues with the hero i been trying for all day too. I am amazed no one else had another link for that clockwork recovery.zip i woulda been done hours ago. very very frustrating but i am sure its my own fault for being a nubbbbb lol. sucks too cause i work all weekend and i wanted to get this done on my day offf.. which was today
you don't flash recovery using a zip. You need to flash the img. I just checked the clockwork thread, the links do appear to be down. Use Amon_RA
Doesn't get any easier than this: http://forum.xda-developers.com/showthread.php?t=706411
lgevo said:
yeah i been trying to get that clockwork to install too i cant find a zip for it or anything. I am rooted but still dont have any idea how to enable su to use the rom manager app. i tried that idiot proof which is missing the link for clockwork. I also tried the the simple root but when i hit the exe i get a error. i had almost no issues with the hero i been trying for all day too. I am amazed no one else had another link for that clockwork recovery.zip i woulda been done hours ago. very very frustrating but i am sure its my own fault for being a nubbbbb lol. sucks too cause i work all weekend and i wanted to get this done on my day offf.. which was today
Click to expand...
Click to collapse
Go here
http://www.koushikdutta.com/2010/02/clockwork-recovery-image.html
About half way down the page you'll see a list of phones, click the EVO. Clockwork recovery will begin downloading.
imo don't use clockwork, people have been reporting problems with wiping with it.
Where does the recovery clockwork img go?
jgarozzo said:
Where does the recovery clockwork img go?
Click to expand...
Click to collapse
Have you read any guides or tutorials?
http://forum.xda-developers.com/showpost.php?p=6806125&postcount=1
mrono said:
imo don't use clockwork, people have been reporting problems with wiping with it.
Click to expand...
Click to collapse
He can use clockwork, i dont think he will need to wipe the SD, i mean, is not really necesary
,is it?
mikevillarroel said:
He can use clockwork, i dont think he will need to wipe the SD, i mean, is not really necesary
,is it?
Click to expand...
Click to collapse
It is if you had apps2sd stuff on it from another rom. That's where I ran into problems. I've seen other threads where people reported it not wiping cache correctly. I never saw that personally though.
Here...maybe this will help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
redrazr7791 said:
Here...maybe this will help
Click to expand...
Click to collapse
Hahahahaha

[Q] Droid X Overclock help, 2.2 OTA. Is there a kernel?

Hey guys, I'm running Froyo OTA on my DX and I was wondering if someone could help me speed this bad boy up a bit. I want to overclock just a little so my PSX Emulator will run a bit smoother. I am fairly new to the Android community and do not have much knowledge when it comes to this stuff.
I have SetCPU but it only goes up to stock CPU speed. I have come to understand that I need a new kernel that will allow me to bump it up over stock clock.
I do not want to go too high (Was thinking around 1.1Ghz, maybe a little higher?) because from what I understand, it is already clocked pretty high out of the factory. If anyone can help me understand a bit better I would greatly appreciate it.
I need to find the correct kernel and figure out how to install or whatever without turning my phone into a paper weight.
Help please?
You can't OC the DX on the Froyo yet. We could do it on 2.1 but not 2.2.
Also, the PSX emulator is not coded very well and the stuttering and horrible playing experience on it is due to bad coding and also a fairly weak GPU on the DX.
If you want the best gaming experience at this point in time, get the Sanding Fascinate. Its CPU and especially GPU runs circles around the DX. However, you will still have to wait until the coding gets better for that emulator.
Sent from my DROIDX using Tapatalk
Yes- you do need a custom kernel and there aren't any yet. The bootloader is locked and they are working on cracking it. Until then- no goodski.
Thanks, but there is a new problem...
Ah, I see. So I wait then. haha, but I have a new problem now.. I installed Tranquility and now all my stupid phone does when I power up is show the loading screen. It's been doing it for a good 15 minutes now. I know it is off subject but can someone tell me how to remove this Rom?
Stiltz85 said:
Ah, I see. So I wait then. haha, but I have a new problem now.. I installed Tranquility and now all my stupid phone does when I power up is show the loading screen. It's been doing it for a good 15 minutes now. I know it is off subject but can someone tell me how to remove this Rom?
Click to expand...
Click to collapse
Well the first and most important question is - did you back up your original rom before you loaded tranquility- bc if not - it is bad news. If you backed up- then you can restore your back up. If you didn't- well- I am not sure what you can do. I will wait to hear if you have a back up.
If you can't figure it out, you could flash the newly released sbf.
thepolishguy said:
Well the first and most important question is - did you back up your original rom before you loaded tranquility- bc if not - it is bad news. If you backed up- then you can restore your back up. If you didn't- well- I am not sure what you can do. I will wait to hear if you have a back up.
Click to expand...
Click to collapse
kennydied23 said:
If you can't figure it out, you could flash the newly released sbf.
Click to expand...
Click to collapse
Yes- just in time- you can now restore your system bc the SBF was just leaked last night. Google...
VRZ_MB810_2.3.15_1FF_01
and you will be directed to several sites that have the file hosted.
That is just great news! I have to find a way to charge my battery though... I am friends with a few of the verizon guys so maybe I can get them to charge my battery on one of the DX's in the store. Thanks guys, I'll try the new VRZ_MB810_2.3.15_1FF_01.sbf!
u dont have to use 2.2 SBF. if you can reload back to ClockworksMod Recovery, dl the OTA 2.2 Deodexed Update.zip file here.
http://forum.xda-developers.com/showthread.php?t=794007
go to the bottom of the FIRST POST and youll see this....
FILES!!!:
A. Clockwork Restory Image Done - Clockwork Folder File [Edited version with black status and transparent notification bar.]
1.Extract the folder.
2.On your sdcard place the folder in \sdcard\clockworkmod\backup\ [if you don't have that, create it.]
3.Click Bootstrap Recovery inside the DroidX Bootstrap App.
4.Boot into Clockwork recovery.
5.Choose restore, then navigate to the folder you created earlier.
6.Choose restore. Then follow the instructions on the screen.
7.Wipe/Factory Reset.
8.When you reboot you will have a totally clean system, with OTA Froyo 2.2, already rooted. and fully deodexed with black status bar and transparent notification bar.
B. Update.zip - File
1.Wipe and reboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Got it to 1.15 Ghz, I managed to get it stable at 1.17 Ghz. still tinkering though.

[ROM] Ultimate - v8.2.1 JS8, SMOKEN!!. 4/9/2011

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Announcements:
ALL REDOWNLOAD 8.2.1 NOW AND FLASH FROM STOCK.
Join Ultimates Facbook Group!
Submit all requests to webstar1
Latest version:
8.2.1 - Download
Changelog
Rebuilt Ultimate framework on JS8
Added AM/PM MOD
Cleaned the theme
Added Arabic/Persian and Urdu Support (Only Framework, Settings, Keyboard and Contacts)
Updated Addon App with latest Addons (Still need to be done. Only download star launchers if you want)
Added Malware Patch
Added fugu tweaks
Added more optimisations
*Video Camera now has auto focus
*Ultimate Addons
*KC1 Modem
*WIFI Supplicant
*Onix 2.0.5 128 Kernel HZ
*camera with power button and no ffc
*Dialer with no video call
*correct dialer tones
*call recording
Installation instructions (Simple):
Download update.zip CWM 3x (The newest for captivate).
Download rom
Copy update.zip to sd root.
Copy rom to sd root
Go to standard Recovery (on stock from odin one click.
Flash update.zip
After phone reboots flash update.zip one more time from standard recovery to get into cwm.
Go to recovery
Choose ultimate
Flash and reboot
This Will Wipe Data
No longer revelant
Looks nice. How's the GPS?
NAB
+10 char
xavenged said:
Looks nice. How's the GPS?
Click to expand...
Click to collapse
dont know flashing on my system now
and I do not use that modem or kernel I use these
the reason for the older kernel is to fix the issue with flashing form stock.
GPS is ok on jve modem
will test tljl3 today
do not use jl3
Theme looks sleek and professional. I might flash this just for that reason.
Sent from my SAMSUNG-SGH-I897
ninjuh said:
Theme looks sleek and professional. I might flash this just for that reason.
Sent from my SAMSUNG-SGH-I897
Click to expand...
Click to collapse
Agreed. Very nice modified theme. Original gingerbread colorway is completely overrated.
I897. XDA App- fin!
Is Matted Blues theme the default?
Looks very clean.
What firmware version are you using?
DiscipleDOC said:
What firmware version are you using?
Click to expand...
Click to collapse
look in the title.
and like I posted I am just the porter of the ultimate team
I just tried to install this from stock and didn't work. Very similiar to the last versions of this ROM, in which you had to install over another custom ROM to work. Is there possibly something I missed? I did the normal:
1. put Ultimate on root of SD card
2. put update.zip on root of SD card
3. applied update.zip to get into CWM recovery (did it twice, as normal)
4. selected Ultimate ROM zip in CWM recovery
5. stuck on Samsung Galaxy Boot image
try one more time with a full reset.
did you install from stock froyo or eclair?
tjsooley said:
try one more time with a full reset.
did you install from stock froyo or eclair?
Click to expand...
Click to collapse
I came from Eclair, one click stock ODIN. I will give it another shot.
try it from stock froyo
Has anyone gotten this to work?
Dieabolical said:
I just tried to install this from stock and didn't work. Very similiar to the last versions of this ROM, in which you had to install over another custom ROM to work. Is there possibly something I missed? I did the normal:
1. put Ultimate on root of SD card
2. put update.zip on root of SD card
3. applied update.zip to get into CWM recovery (did it twice, as normal)
4. selected Ultimate ROM zip in CWM recovery
5. stuck on Samsung Galaxy Boot image
Click to expand...
Click to collapse
+1.
Phone stuck on galaxy boot image
do you have to flash a 2.2 rom then flash this one?
Same here. Phone stuck on Galaxy S screen.
Restored phone to 2.1
Master cleared
Rooted (First attempt)
Did not root (2nd installation attempt)
Installed ROM
Data reset
Reboot
*** UPDATE ***
Installation worked when installing on top of a ROM that was already installed.
I flashed from stock/masterclear and it worked correctly for me. Pretty nice. love the dock bar and the animations. Doesn't appear the home button works though.
I installed it over an early version of firefly, and it worked. Home button seems to be working for me. Flashing this ROM almost makes me feel I have a new phone, or something. I mean, it looks and just feels different than anything I have flashed previously. I like it so far, first impressions. Going to drive it around for a few days and see just how well it does under usage.

I think I bricked my NS

I was flashing CM7. This is what I did:
Rooted, ClockworkMod v3.0.0.5 from Rom Manager.
From recovery did a BackUp (seems useless because it doesn't do anything.)
Wipe data/factory reset
Wipe Cache partition
Install zip from sdcard - selected cm7 - got a Status Error 7
Now the phone won't boot, stays on the Google screen, I can get into the recovery though.
Any ideas? I am downloading the Stock 2.3.3 image.
Thanks!
restore your backup.
irishrally said:
restore your backup.
Click to expand...
Click to collapse
I tried doing that from ClockworkMod, gave me an error, it was a ridiculously small file, doesn't seem like a backup.
Even the stock gives me a Status Error 7.
Any ideas?
you didnt brick, just download a a new rom, sounds like it was a bad download.. if the phone shows a screen it isnt bricked...
shabbypenguin said:
you didnt brick, just download a a new rom, sounds like it was a bad download.. if the phone shows a screen it isnt bricked...
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what I get. For both Stock 2.3.3 and CM7. I've tried multiple times.
right did you re download it and copy it back to the phone or just going off the rom you downloaded already? if so worst case shouldnt odin work?
shabbypenguin said:
right did you re download it and copy it back to the phone or just going off the rom you downloaded already? if so worst case shouldnt odin work?
Click to expand...
Click to collapse
I'm downloading it again. Should I rename it to update.zip? Odin, that's the software right?
I think your problem is because you are using the clockwork mod for I9020, where as for rogers you should be using clockwork for i9023 -- at least this was my case, I have i9020a rogers
you can get it from this link 2nd file.
after using this one you shouldn't be getting "E: can't mount cache" and you shall be able to repeat rooting/flashing steps.
crypticsorr0w said:
I think your problem is because you are using the clockwork mod for I9020, where as for rogers you should be using clockwork for i9023 -- at least this was my case, I have i9020a rogers
you can get it from this link 2nd file.
after using this one you shouldn't be getting "E: can't mount cache" and you shall be able to repeat rooting/flashing steps.
Click to expand...
Click to collapse
I was feeling so, either the ROM or the recovery. I'm just flashing the recovery, thanks for your help.
Also, how do I manually install ClockworkMod?
What is your computer OS? do you have android sdk?
In general everything you need is in this post
http://forum.xda-developers.com/showthread.php?t=955719
crypticsorr0w said:
What is your computer OS? do you have android sdk?
In general everything you need is in this post
http://forum.xda-developers.com/showthread.php?t=955719
Click to expand...
Click to collapse
It worked, I used fastoot and Terminal. Worked like a charm. Thanks again.

Stock ROM constant reboot on white HTC EVO 4G screen

Hi all,
Here's short history of the phone:
Friend of mine drop his on the concrete about June of last year and whole screen was cracked (not pretty). About month ago I found LCD Screen with Digitizer on ebay bought it and replaced it.
After turning it on everything was working except random reboots. Phone was not registered to any account so there was no internet only WI-FI.
So I started going into system updates and downloading HTC updates it did two of them and I think on the 3rd one it just starts to boot white HTC EVO 4G screen comes on and then it reboots.
Only pulling the battery will stop it.
This is all on stock HTC Sense ROM, rooting was never attempted!
I've searched thru the forums here but everything here relates to failed rooting process.
Can someone please make any suggestions?
Bellow is the pictures of boot loader.
Help is greatly appreciated!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These directions are for un-rooting, but should fix your phone:
http://forum.androidcentral.com/htc...19278-how-unroot-return-stock-ruu-method.html
Fazulka said:
These directions are for un-rooting, but should fix your phone:
http://forum.androidcentral.com/htc...19278-how-unroot-return-stock-ruu-method.html
Click to expand...
Click to collapse
Thank you!
Followed the instruction, run RUU and it starts to check the phone after this I get error[170]: USB connection error.
I've tried over 10 times.
Step 4 says "Make sure USB debugging is enabled on your phone."
I can't even log into Sense?
The only other thing you can do is find a PC36IMG.zip and put it on your microSD card, then reboot into the bootloader. It should find it and reflash everything, the same as using the RUU.
ffolkes said:
The only other thing you can do is find a PC36IMG.zip and put it on your microSD card, then reboot into the bootloader. It should find it and reflash everything, the same as using the RUU.
Click to expand...
Click to collapse
I've tried using this method found here
I placed PC36IMG.zip in root of the SD card. But when I boot into recovery I can see for about 3 seconds on the right side status bar how it checks PC36IMG.zip file but then it goes back to recovery. It never ask me if I want to update like it says in the above tutorial "Do you want to start update?"
Any other suggestions?
JohnnyBeGood113 said:
I've tried using this method found here
I placed PC36IMG.zip in root of the SD card. But when I boot into recovery I can see for about 3 seconds on the right side status bar how it checks PC36IMG.zip file but then it goes back to recovery. It never ask me if I want to update like it says in the above tutorial "Do you want to start update?"
Any other suggestions?
Click to expand...
Click to collapse
I had to unroot mine and I found that u have to have the right pc36img file. If you dont know what ver rom was running then you may need to try them all. But I had the same problem it just wouldent install the file. Keep trying and if you need help finding them Ill help ya.
I found this but its not the same place I got mine from. http://www.filecrop.com/htc-evo-4g-roms.html
Thanks for the reply!
Somewhat of a progress. I tried countless times and it always gives me USB connection error: Then I downloaded HTC Sync and and I think I went to Hboot and I heard sound on windows it seemed like phone got recognized and I was able to finish the processes. It was flashed using RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed. Then when I went to again in recovery it was again red triangle over the phone.
After that I just let it try to boot and it finally booted into HTC sense!
Turned on WI-FI and wanted to check if there's any updates and it said no updates?
This is what recoveries I've tried so far:
Amon RA 2.1.1
Amon RA 2.2.1
Amon RA 2.3 (Added 02/09/2011)
Stock Recovery 3.26.651.6 (Added 01/18/2011)
Stock Recovery 3.29.651.5 (Added 01/18/2011)
Stock Recovery 3.30.651.3 (Added 01/18/2011)
Stock Recovery 3.70.651.1 (Added 01/18/2011)
One by one I tried each one renaming to PC36IMG.zip and none of them asked me if I want to do the update. It just checks it and goes back to bootloader.
Why do I get red triangle?
What should I do now?
Help is appreciated!

Categories

Resources