Related
Hi, I have recently bought a Samsung GS2 from China and the kernel that comes with it is KG5. I wanted to flash the phone with firmwares from other country but I'm experiencing so many problems during the process. I use odin 1.85 and the official firmware downloaded from samfirmware.com but everytimne I try to flash I get the following error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKG3_CL401405_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKG3_REV_02_CL1040774.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKG3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
The only other times that I were able to succeed is when I flash with the original CSC = OZHKG5 firmware that was meant for China region. Is there something that I did wrong? Am I not supposed to flash firmwares from a different region? Am I pretty much stuck with the China firmware now? Thanks!
Can anyone help? I'm really stumped on this.
Flashing other region rom should be no problem..
did u flash the rom correctly.. follow the instruction..
try flash the phone using other rom..
yes, i followed the instruction on using odin carefully. i also tried other roms but i still get the same problem.
I'm experiencing the same problem...
god, I should never have taken my dad's chinese sgs 2, assuring him that I will install a rom that is better than the original stock firmware...
hi
I had this problem 2, it should be no problem to flash another firmware. Please retry the flashing process using another original sgs cable, tell me how it goes
Dudes the Chinese model, not Hong Kong one, cannot work with the normal firmware for the international version. It will not flash. I believe they had to make some changes to it before they were allowed to sell it in China.
make sure that any process named starting with kies* is killed from windows task manager.
i recollect facing the same issue when flashing a ROM (my phone is not from CHINA to make the point that its not device specific)
i m in same situation : restrained into the chinese version of znkg5. it is so mich localized and stipped with its applications installed that it can hardly br condidered android anymore. and for sure it is not "open".
i tryed manu many rom via odin, failed all and came back to znkg5. the procedure via odin is not the issue as i can flash the znkg5 properly. it is either the rom or the hardware itself.
did someone tried some flash in world glock mode (via sd card) ?
do u know anothet forum about this flash, even in chinese ?
Same
I'm facing the same problem...
now I can't boot the phone, and access the recovery mode... only download mode(hope this is good).
when try to boot the phone, the android robot appear in red, and a message "system update fail" and something in chinese.
Note: I got this phone as a gift, and was bought in China, but actually I'm not in China, I'm in Brazil...
Is this the case to take to an authorized samsung technical service and hope they can solve this? or there's any other hope?
Thanks
You're good, Download mode is all you need. As Intratech said, the only way to get it working is to flash it with a China based ROM.
http://forum.xda-developers.com/showthread.php?t=1192575
I hope you speak Chinese... well it does have English locale on it.
It's proved that I9100 sold in China could not flash original international firmware.
If you insist to use a international firmware on it, remove boot.bin, modem.bin, param.lfs and Sbl.bin from the firmware tar file, and then have a try.
And you may use Clockwork Mod to flash baseband.
delete
10 char
What about me installing the China version on my Taiwanese hardware? I've read that Google is removed and Baidu becomes default etc. Sounds like a nightmare, but I really want Chinese KB support AND 2.3.4.
downwiththebanksters said:
What about me installing the China version on my Taiwanese hardware? I've read that Google is removed and Baidu becomes default etc. Sounds like a nightmare, but I really want Chinese KB support AND 2.3.4.
Click to expand...
Click to collapse
surely there are app for chinese keyboards that you can use? The only thing that cannot be chinese are the menus, as far as I know.
hua_wuxin said:
It's proved that I9100 sold in China could not flash original international firmware.
If you insist to use a international firmware on it, remove boot.bin, modem.bin, param.lfs and Sbl.bin from the firmware tar file, and then have a try.
And you may use Clockwork Mod to flash baseband.
Click to expand...
Click to collapse
Has anyone actually tried this? I keep hearing there's a signed bootloaded on these Chinese phones. How does one verify this without trying to load a different one and (potentially) hardbricking the phone?
lobo1976 said:
surely there are app for chinese keyboards that you can use? The only thing that cannot be chinese are the menus, as far as I know.
Click to expand...
Click to collapse
Nearly 70% of all android malware originates from china, so I'm loath to download anything chinese in origin. Yes I know that is a bit of a contradiction for my goal.....just because you're paranoid doesn't mean they're not watching.
Here are some 2.3.4 roms (LeoMar75, Villain, Cognition) with the Samsung Chinese keyboard included: http://www.mobile01.com/topicdetail.php?f=568&t=2188818&last=30763131 (Note: I have not tried any of these.)
I use Cognition 1.5.1 on my Taiwan phone. I don't have the Chinese keyboard with the new firmware. Maybe I will try to re-add it later, but my Chinese is poor so Google Pinyin IME is enough for me.
I need to have BPMF for my wife/kids/other sundry locals to use the phone mostly to input GPS. As you know, most locals can't pinyin, BPMF is their standard. Does the above google pinyin IME have BPMF, or is there a BPMF. Truth be told I don't even know what the acronym IME means.
You can use chinese firmware only
For two days i have been struggling to root my new Orange Romania N9005.
First of all I downloaded CF Auto Root and Odin 3.09. Followed the steps exactly (i'm not new to rooting) ,Uninstalled Kies and downloaded the latest drivers only, and every single time I try to root it Odin gives the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the screen of the note 3 the following error in red : SECURE CHECK FAIL : recovery
I have since tried every single version of ODIN , tried flashing pre-rooted roms only to get my device soft bricked(Fails right at the very end, and then I restored via kies )
,I have tried to change usb ports to no avail, even tried to root it on 4 different laptops.Tried with different cables, with usb debugging on and off, NOTHING WORKS!!!
Please help me I am thinking of setting it on fire!!!
Try install Kies and try again...
/CK
tried with old kies and kies 3 as well.Also tried older drivers.
Do i have a locked BootLoader?This shouldnt be the case as it is an n9005.
Any way to check if bootloader is locked and if so any way to unlock it for the international version?
Thanks!
No one?
Doesn't any one know how to help?Don't know where else to ask.
NavDragan said:
Doesn't any one know how to help?Don't know where else to ask.
Click to expand...
Click to collapse
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
NavDragan said:
For two days i have been struggling to root my new Orange Romania N9005.
First of all I downloaded CF Auto Root and Odin 3.09. Followed the steps exactly (i'm not new to rooting) ,Uninstalled Kies and downloaded the latest drivers only, and every single time I try to root it Odin gives the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the screen of the note 3 the following error in red : SECURE CHECK FAIL : recovery
I have since tried every single version of ODIN , tried flashing pre-rooted roms only to get my device soft bricked(Fails right at the very end, and then I restored via kies )
,I have tried to change usb ports to no avail, even tried to root it on 4 different laptops.Tried with different cables, with usb debugging on and off, NOTHING WORKS!!!
Please help me I am thinking of setting it on fire!!!
Click to expand...
Click to collapse
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
I deactivated the reactivation lock but still the same problem.I have Downloaded the CF-Auto-Root-hlte-hltexx-smn9005.tar file several times same thing every time.My last chance is doing a full wipe of the system and then trying again.I hope orange Romania CSC does't have some sort of security block.
Frustrating thing is the phone is fully functional so i cannot ask for a replacement.And even after the dozens of failed flash attempts it still reads 0x0.
YES!!!Finally.A full wipe did it.!Thank you for your interest in helping me.
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thanks that helped! Unlike the OP didnt have to wipe phone.
Thank youu
nsnarayan10 said:
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
Click to expand...
Click to collapse
THank you soo much after following exact instruction that you gave i finally got it rooted!! Thank you!!
nsnarayan10 said:
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
Click to expand...
Click to collapse
thanks for bringing this up.
so where do you get the proper file?
i have the same problem, and a full wi[e has not helped here..
kindly give the correct link.
thanks once again
Before you wanna flash. Don't forget to uncheck reactivation lock, put off your external sd card. And look carefully for your modem and radio. Don't switch with the another kernel before official launch comes.
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk
Cruel B said:
Before you wanna flash. Don't forget to uncheck reactivation lock, put off your external sd card. And look carefully for your modem and radio. Don't switch with the another kernel before official launch comes.
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk
Click to expand...
Click to collapse
h guys!
i asked for 'the propper files' link?...
my phone now entres boot-loop when i restart it. any help?
...after several loops, it finally completes start up. by now i'd have left it alone for about 15 mins!
tanks, in advance..
---------- Post added at 03:22 PM ---------- Previous post was at 02:51 PM ----------
aidelnma said:
THank you soo much after following exact instruction that you gave i finally got it rooted!! Thank you!!
Click to expand...
Click to collapse
h guys!
i asked for 'the propper files' link?...
my phone now entres boot-loop when i restart it. any help?
...after several loops, it finally completes start up. by now i'd have left it alone for about 15 mins!
tanks, in advance..
THANK YOU!
Yes, the reactivation lock did it for me too. I was stuck at exactly the same point and couldn't think of why, and this didn't even come to mind. In fact, I forgot that I even did that, but it worked. !!!
nsnarayan10 said:
I will help you,dont worry!
Click to expand...
Click to collapse
Help please, I have a (Note 3) SM-N900V on JSS15J.N900VVRUBMJE.
I bought it on Jan 12th ish, and took the firmware update as soon as I saw it because of some reading I had done.... shouldn't have done that I guess.
I am still totally unable to root this thing, Kingo, Odin v3.0.9. I am willing to do w/e (go back to older firmware even if possible)
I know there are no guarantees in this attempt, and would not hold you to anything, I have rooted every other android I have had and am very familiar with the process, any help you can offer would be greatly appreciated
https://plus.google.com/u/0/+JoelJrMcCracken/
This has helped. Thanks a lot.
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
This helped a lot. Problem fixed.
regards
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thanks. 1.5 years later and this helped me too!
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
U sir are a life saver!
Thanks!
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thank you, you saved me from pulling my hair out :highfive:
Hello to all.
I have a Tab 3 (that was given to me)on Software version T217SVPUBOH1
Hardware Version T217S.04
Model Number SM-TS17S
Android Ver: 4.4.2
Baseband T217SVPUBOH1
I guess Stock Kernel 3.4.0-1715729
Build Number KOT49H.T217SVOUBOH1
Could Someone direct me to the PROPER CF Auto Root and Odin? I am not planning on changing the ROM, I just want to Add Viper to increase the Audio Volume and maybe some other root controls.
Any and All Help Is Appreciated
Thank you in Advance
Blessings
Thank a lott!!!already rooted!!!!
Here is the the stock T-Mobile newest firmware that was just pushed to everyone's phone that was not rooted.. >>> N930TUVU2API4
FYI::: Do not install this on your phone if you want to keep root<<<< YOU HAVE BEEN WARNED!!!!!
Otherwise Odin this if you want to be on the latest firmware..
Download Zip File -- use your favorite zip program to unpack it, and have fun..
galaxyuser88 said:
Here is the the stock T-Mobile newest firmware that was just pushed to everyone's phone that was not rooted.. >>> N930TUVU2API4
FYI::: Do not install this on your phone if you want to keep root<<<< YOU HAVE BEEN WARNED!!!!!
Otherwise Odin this if you want to be on the latest firmware..
Download Zip File -- use your favorite zip program to unpack it, and have fun..
Click to expand...
Click to collapse
Good one bud.... I can't get it last night but I'm glad u did[emoji106]
TwisT3DroiD_N920T
Threads of this nature do not belong in the development section. Please read the sticky titled "Rules for Posting in Development" before posting in there again.
THREAD MOVED
galaxyuser88 said:
Here is the the stock T-Mobile newest firmware that was just pushed to everyone's phone that was not rooted.. >>> N930TUVU2API4
FYI::: Do not install this on your phone if you want to keep root<<<< YOU HAVE BEEN WARNED!!!!!
Otherwise Odin this if you want to be on the latest firmware..
Download Zip File -- use your favorite zip program to unpack it, and have fun..
Click to expand...
Click to collapse
Can this be odined over the rooted ROM, to return to stock... Before returning to store
Sent from my SM-N930T using XDA-Developers mobile app
PhilPan said:
Can this be odined over the rooted ROM, to return to stock... Before returning to store
Sent from my SM-N930T using XDA-Developers mobile app
Click to expand...
Click to collapse
yes, as odin wipes your internal card and firmware..
PhilPan said:
Can this be odined over the rooted ROM, to return to stock... Before returning to store
Sent from my SM-N930T using XDA-Developers mobile app
Click to expand...
Click to collapse
just factory reset.....poof root gone!
galaxyuser88 said:
Here is the the stock T-Mobile newest firmware that was just pushed to everyone's phone that was not rooted.. >>> N930TUVU2API4
FYI::: Do not install this on your phone if you want to keep root<<<< YOU HAVE BEEN WARNED!!!!!
Otherwise Odin this if you want to be on the latest firmware..
Download Zip File -- use your favorite zip program to unpack it, and have fun..
Click to expand...
Click to collapse
Tried flashing another stock ROM trying to get back to stock from root. That didn't work. Then I flashed this and am able to boot. But my mobile data icon is just 4G instead of being 4G LTE (or LTE), and I'm missing the WiFi calling button as well.
So, I probably need to flash the radios and everything with this. So, do I flash the AP first from the ZIP, then everything else after, or can I flash them all at once? Not an experienced ODIN user. Only used it a handful of times.
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
ted77usa said:
Good one bud.... I can't get it last night but I'm glad u did[emoji106]
TwisT3DroiD_N920T
Click to expand...
Click to collapse
Throwing you in the mix as well. Please see my post above.
-BoneZ- said:
Tried flashing another stock ROM trying to get back to stock from root. That didn't work. Then I flashed this and am able to boot. But my mobile data icon is just 4G instead of being 4G LTE (or LTE), and I'm missing the WiFi calling button as well.
So, I probably need to flash the radios and everything with this. So, do I flash the AP first from the ZIP, then everything else after, or can I flash them all at once? Not an experienced ODIN user. Only used it a handful of times.
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
Throwing you in the mix as well. Please see my post above.
Click to expand...
Click to collapse
@-BoneZ-
U said that u tried to go back to stock from root? Meaning u have pgc firmware and u CAN'T use this PI4 firmware to go back to stock..... when u do that u stuck with newer Bootloader and u not able to root again.... if u need to go back then flash PGC original firmware.
EDIT:
If u already on PI4 then flash all at once.... BL AP CP CSC....
TwisT3DroiD_N920T
-BoneZ- said:
Tried flashing another stock ROM trying to get back to stock from root. That didn't work. Then I flashed this and am able to boot. But my mobile data icon is just 4G instead of being 4G LTE (or LTE), and I'm missing the WiFi calling button as well.
So, I probably need to flash the radios and everything with this. So, do I flash the AP first from the ZIP, then everything else after, or can I flash them all at once? Not an experienced ODIN user. Only used it a handful of times.
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
Throwing you in the mix as well. Please see my post above.
Click to expand...
Click to collapse
Yes you must flash all parts of this to be on stock PI4 ROM. But remember that you will lose root and not get it back.
You sir are a life saver thank you so much i was stupid didnt read thru forums and tried to root on the latest update...this flashed via odin brought my phone back to life
ted77usa said:
@-BoneZ-
U said that u tried to go back to stock from root? Meaning u have pgc firmware and u CAN'T use this PI4 firmware to go back to stock..... when u do that u stuck with newer Bootloader and u not able to root again.... if u need to go back then flash PGC original firmware.
EDIT:
If u already on PI4 then flash all at once.... BL AP CP CSC....
TwisT3DroiD_N920T
Click to expand...
Click to collapse
galaxyuser88 said:
Yes you must flash all parts of this to be on stock PI4 ROM. But remember that you will lose root and not get it back.
Click to expand...
Click to collapse
Thanks, guys. Those were the answers I was looking for.
Hello I want to say thank you for providing the T-Mobile Firmware Package for restoring the Note 7 to its original state after a Rooting atampt botched up. I also had this problem but now restored the phone with the supplied firmware. Thank you.
I do have one problem though. The firmware supplied has the first update with the annoying Safety Recall statement in that hugh box while plug is inserted, pulled out and turned on. I like to know if you can supply the original firmware that the phone came boxed with or if you have some kind of way of getting rid of that stupid annoying big box message that pops up all the time.
And again thank you so much.
Ok I feel like a dumb ass,
This has to be the most complicated root, update I have ever seen. I accidently hit update earlier today which reduced my battery life to 60% I tried living with it today and it was driving me absolutely nuts I thought about taking the phone in and getting a damn iphone just because I'm tired of messing around with this phone..... I tried to root using post one however it keeps failing, I tried rooting using post 2 that also failed. I tried going back one firmware version that also didn't work, I tried doing the samsung smart switch recovery it asks for a code I tried the serial of the phone and model number that also didn't work. Can someone please explain either how to get root from the newest firmware or to revert back to a older firmware that dosen't have this stupid battery restriction. The information of my phone is below .
I'm tired of the battery restriction and tired of hitting okay I know my phone will blow up....
Samsung Note 7 Tmobile
SM-N930T
6.0.1
Build Number
MMB29M.N930TUVU2APK1
any help is appreciated as I am pulling out my hair...
mikesx4911 said:
Ok I feel like a dumb ass,
This has to be the most complicated root, update I have ever seen. I accidently hit update earlier today which reduced my battery life to 60% I tried living with it today and it was driving me absolutely nuts I thought about taking the phone in and getting a damn iphone just because I'm tired of messing around with this phone..... I tried to root using post one however it keeps failing, I tried rooting using post 2 that also failed. I tried going back one firmware version that also didn't work, I tried doing the samsung smart switch recovery it asks for a code I tried the serial of the phone and model number that also didn't work. Can someone please explain either how to get root from the newest firmware or to revert back to a older firmware that dosen't have this stupid battery restriction. The information of my phone is below .
I'm tired of the battery restriction and tired of hitting okay I know my phone will blow up....
Samsung Note 7 Tmobile
SM-N930T
6.0.1
Build Number
MMB29M.N930TUVU2APK1
any help is appreciated as I am pulling out my hair...
Click to expand...
Click to collapse
Have you tried this yet?
★[ROM] [STOCK] N930TUVU1APGC | 6.0.1 |… | T-Mobile Samsung Galaxy Note 7
http://forum.xda-developers.com/tmo...om-n930tuvu1apgc-6-0-1-deodexed-knox-t3461513
---------- Post added at 08:04 AM ---------- Previous post was at 07:56 AM ----------
mikesx4911 said:
Ok I feel like a dumb ass,
This has to be the most complicated root, update I have ever seen. I accidently hit update earlier today which reduced my battery life to 60% I tried living with it today and it was driving me absolutely nuts I thought about taking the phone in and getting a damn iphone just because I'm tired of messing around with this phone..... I tried to root using post one however it keeps failing, I tried rooting using post 2 that also failed. I tried going back one firmware version that also didn't work, I tried doing the samsung smart switch recovery it asks for a code I tried the serial of the phone and model number that also didn't work. Can someone please explain either how to get root from the newest firmware or to revert back to a older firmware that dosen't have this stupid battery restriction. The information of my phone is below .
I'm tired of the battery restriction and tired of hitting okay I know my phone will blow up....
Samsung Note 7 Tmobile
SM-N930T
6.0.1
Build Number
MMB29M.N930TUVU2APK1
any help is appreciated as I am pulling out my hair...
Click to expand...
Click to collapse
If you can restore it back to stock. This thread may help. It's helping me.
Need help with Package Disabler 6.3 | Samsung Galaxy Note 7
http://forum.xda-developers.com/note-7/help/help-package-disabler-6-3-t3494052
So I just tried to do the instructions from the ROM STOCK below however I get stuck on step 5 when I try to flash the "MODIFIED_TMO_SPR_N930PVPU1APH3_REV00_ENGBOOT_FIRM WARE.tar.md5" it FAILS at
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> adspso.bin
<ID:0/003> apdp.mbn
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth) <------------------------
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I than did a quick search had someone suggest checking "re-partition" that also failed with the same error. After rebooting the phone it wouldn't boot anymore and was stuck at "an error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software"
So I gave that a go and it tells me that the device is not supported after doing the model and serial number lol.
ConcernedCustomer said:
Have you tried this yet?
★[ROM] [STOCK] N930TUVU1APGC | 6.0.1 |… | T-Mobile Samsung Galaxy Note 7
http://forum.xda-developers.com/tmo...om-n930tuvu1apgc-6-0-1-deodexed-knox-t3461513
---------- Post added at 08:04 AM ---------- Previous post was at 07:56 AM ----------
If you can restore it back to stock. This thread may help. It's helping me.
Need help with Package Disabler 6.3 | Samsung Galaxy Note 7
http://forum.xda-developers.com/note-7/help/help-package-disabler-6-3-t3494052
Click to expand...
Click to collapse
mikesx4911 said:
So I just tried to do the instructions from the ROM STOCK below however I get stuck on step 5 when I try to flash the "MODIFIED_TMO_SPR_N930PVPU1APH3_REV00_ENGBOOT_FIRM WARE.tar.md5" it FAILS at
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> adspso.bin
<ID:0/003> apdp.mbn
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth) <------------------------
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I than did a quick search had someone suggest checking "re-partition" that also failed with the same error. After rebooting the phone it wouldn't boot anymore and was stuck at "an error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software"
So I gave that a go and it tells me that the device is not supported after doing the model and serial number lol.
Click to expand...
Click to collapse
I was able to stop the 60% update with package disabler, but was also trying to go back to pgc update...getting the same fails as you. 3 Button into recovery and wipe everything then reboot. Should start you fresh to use the phone
Sent from my SM-G935T using XDA-Developers mobile app
ArmyofTracy said:
I was able to stop the 60% update with package disabler, but was also trying to go back to pgc update...getting the same fails as you. 3 Button into recovery and wipe everything then reboot. Should start you fresh to use the phone
Sent from my SM-G935T using XDA-Developers mobile app
Click to expand...
Click to collapse
If only it was that easy. As of now I can't even get into android it fails to boot. I cleared cache and factory reset and still won't boot. I'm sure I will have to flash now for sure from recovery or download mode. I think Samsung is ****n with us somehow to not let us flash.
mikesx4911 said:
If only it was that easy. As of now I can't even get into android it fails to boot. I cleared cache and factory reset and still won't boot. I'm sure I will have to flash now for sure from recovery or download mode. I think Samsung is ****n with us somehow to not let us flash.
Click to expand...
Click to collapse
The same thing happened to me. I re-flashed to the recent firmware I had installed originally (the one with the big ugly safety recall message from September). I flashed everything at once BL, AP, CP and CSC(I used the HOME_CSC_*.tar.md5 named file because I was returning to stock)
This site appears to be an archive for all Android devices. You can find the firmware of your phone using the model going back to launch date.
Download Firmware – Samsung Update
http://updato.com/firmware-archive-select-model
I think you will find this thread useful as well. It contains definitions and explanations on flashing and working with Odin. I just wish there was more information.
Good luck
Galaxy Note 7 All-In-One Information & A… | Samsung Galaxy Note 7
http://forum.xda-developers.com/note-7/help/galaxy-note-7-one-information-answers-t3448689
Is there a way too get back to PGC? That was the one before the recall? I've tried flashing it and it fails
Sent from my SM-G935T using XDA-Developers mobile app
ConcernedCustomer said:
The same thing happened to me. I re-flashed to the recent firmware I had installed originally (the one with the big ugly safety recall message from September). I flashed everything at once BL, AP, CP and CSC(I used the HOME_CSC_*.tar.md5 named file because I was returning to stock)
This site appears to be an archive for all Android devices. You can find the firmware of your phone using the model going back to launch date.
Download Firmware – Samsung Update
http://updato.com/firmware-archive-select-model
I think you will find this thread useful as well. It contains definitions and explanations on flashing and working with Odin. I just wish there was more information.
Good luck
Galaxy Note 7 All-In-One Information & A… | Samsung Galaxy Note 7
http://forum.xda-developers.com/note-7/help/galaxy-note-7-one-information-answers-t3448689
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Failed again... Tried both CSC files
Im having an issue with my att s8 active, it has not updated since june 26th 2018 and according to att its 4 updates behind and i cant get the pie update. After spending all day on the phone with the useless insurion and samsung support as they either wanted my deductible to replace my phone or send it in and lose it for a few weeks. Is there anyway to update it by odin and firmware, if so is there a link to the last 4 firmwares? I have flashed using odin before on previous galaxies and im comfortable doing it again if its possible. My phone is not unlocked or rooted and I dont need it to be.
My current base band is G892AUCS2BRF2 and im in the us
jd14771 said:
im just going to reply here so if anyone else has this issue its in the right forum.
Have you performed a factory reset yet? dumb question but the easiest to ask.
Click to expand...
Click to collapse
yes I have, I have been thru everything with samsung and att. Now im trying my luck here, I have downloaded firmware G892AUCS2BRF2 and the new pie 9.0 G892AUCU5CSF8 I cannot get odin to install either one. It either hangs and crashes at initialization or gives me a fail
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 6082 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
jd14771 said:
Alright, next two stupid questions. Is USB debugging enabled?
Are you running odin as an administrator?
Click to expand...
Click to collapse
yes and yes there is no such thing as stupid questions only stupid software problems
jd14771 said:
Have you tried using odin3b instead of the official odin?
Click to expand...
Click to collapse
If you are referring to this https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Yes i have tried both versions he has down there to download.
jd14771 said:
Last thing i can think of at the moment is trying another source for the update files. possibly they are corrupt seeing as they are not available from sammobile, you are relying on people uploaing it themselves, so the chances the update is compromised is pretty good.
Click to expand...
Click to collapse
pulled them from this thread https://forum.xda-developers.com/ga...ctive-stock-odin-t3667204/page18#post79978095
the new pie update only has one link as well as the G892AUCS2BRF2 I dont know where else to get them as its hard to trust any page. I havent been around a while so im out of the loop. I kept my active stock so i wouldnt have to do any of this put it just stopped receiving ota updates june of last year
Edit: weird thing is att advanced tech showed my phone as receiving the update.
jd14771 said:
which one did you download? the one from post #1, or a more recent one posted in the comments?
have you tried this one? (from that thread)
https://drive.google.com/file/d/1bw-cYNY1KoEH4Pa-a9dJRQJW09r_uw93/view
G892AUCU5CSF8
Click to expand...
Click to collapse
Ill be safe and redownload that link and try again
Nope:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 6082 M
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
jd14771 said:
alright. Give this one a go. The file name is still as it was when pulled from the device, so it seems untouched.
https://drive.google.com/uc?id=1v2wrmevn2acw7i6k8dmxaz5uktakj6b9
while that downloads can i get your imei
Click to expand...
Click to collapse
357712081494899
edit: fail on the rj one
jd14771 said:
can you post a screenshot of
settings > about phone > software information
Click to expand...
Click to collapse
https://photos.app.goo.gl/bBoj2GXaRyuXa51J9
jd14771 said:
makes absolutley no sense. no sense at all. What i did was suugest trying to install software with bootloader V3 and V5. it make's no sense that this is not taking the files.
Do you have samsung's usb drivers installed on your computer?
Click to expand...
Click to collapse
yep even reinstalled them, broke out an old laptop going to try that.
edit: THERE IS HOPE currently flashing on the laptop!!
ironcobra said:
yep even reinstalled them, broke out an old laptop going to try that.
edit: THERE IS HOPE currently flashing on the laptop!!
Click to expand...
Click to collapse
edit 2: Successful flash finally, there must be a conflict on my build of windows or my chipset drivers.
jd14771 said:
litterally the last thing icould suggest that i believe has a chance of working is flashing the latest Tmobile rom from sammobile.
use this tool (requires 2 Microsoft add ons, read the post) to download the firmware quick.
with the tool running, enter
Code:
Model: SM-G892U
Region: TMB
AUTO (check this box)
binary nature (check this box)
->select check update
make sure to check "Check CRC32" and "Decrpyt Automatically"
->select "Download"
If that fails, then my best suggestion is to visit a samsung repair center near you and have them update it. i confirmed with samsung chat that they can do it. you should call them to verify they will though and if it incurs a charge.
---------- Post added at 02:53 AM ---------- Previous post was at 02:48 AM ----------
can you post detailed specs of each machine? ive seen a few people with your same issue. would help others diagnose the issue if its computer related.
Click to expand...
Click to collapse
https://drive.google.com/drive/folders/1x7SLSotHVDuGhcbnnRRD6PK7ndcvCUj3?usp=sharing
Mine the ryzen system is the problem pc, thanks for the help though really appreciate it.
jd14771 said:
interesting- the main difference that i can see is that your PC does not have Secure boot enabled, while hers does.
your device encryption support status
Code:
Device Encryption Support Reasons for failed automatic device encryption: TPM is not usable, PCR7 binding is not supported, Hardware Security Test Interface failed and device is not Modern Standby, Un-allowed DMA capable bus/device(s) detected, TPM is not usable
i can't list hers because it says elevation required to view, but im willing to bet that might be the problem? idk. if you feel like it, boot into your bios and enable secure boot, and see if it allows you to re-flash the same files you are flashing now when its done. eaither it will be a quick no, or samsung ODIN requires secure boot to work.
Click to expand...
Click to collapse
Ill check into it thanks
Instructions are updated to get eSIMINTRODUCTION - Firstly sorry for posting this as this is common knowledge for many. I still see so many people asking the same questions again and again and i do want to help so decided to write a guide.
If you have Odin Flashing questions please ask here. I have converted a device from U to U1 (just for fun) so i know this works, many other users have confirmed this too.
SECTION1
Pre-Requisites - PC / Laptop, USB Cable, Phone
Switch on USB Debugging from Developer options. To turn on developer options go to Settings>>About Phone>>Software Information>> Then tap the build number 7 times - Developer options will appear at the bottom of Settings Menu.
HOW TO - N986U to N986U1 and or Flash ATID or Flash Any Odin compatible ROM
1. If you want to flash or update to One UI 3 Beta then Download the ATID Firmware here. (This point is old when people were on Android 10 not relevant now)
1. For changing Carrier locked device to Unlocked Firmware (N986U to N986U1) Download the firmware for U1 from OTA Thread or by using Frija
OR1. For changing unlocked device to Carrier locked Firmware (N986U1 to N986U) Download the firmware for U from OTA Thread or by using Frija - This is usually being done to get eSIM Capability on your phone
If you are Flashing One UI 3 Stable download the appropriate firmware. (This point is old when people were on Android 10 not relevant now)
There are many resources for downloading firmware, there is a thread in the N20 Ultra forums, there are tools like Frija and SamFW and more, then there are various websites. Where you are downloading from is your outlook just ensure you download Odin compatible ROM.
2. Download Patched Odin here
3. Unpack/Unzip what you downloaded in Step 2 (Odin Compatible ROM) and put in a folder. Lets call the folder "Flash"
4. Run Odin, click on BL, Browse to the "Flash" folder, add BL file from there, Do the same for AP (click on AP, Add AP file, this will take some time), Same for CP (click on CP, Add CP file)
NOTE ATTENTION CAREFUL To get eSIM Capability on your phone if you are on bootloader version 2 please see step 5a and Skip Step 55 . Click on CSC, Add the file with the name starting with Home_CSC). If you use Home_CSC your phone will not get formatted and data will remain Intact
USERDATA Stays empty.
5a. Do the same for CSC (click on CSC, Add the file with the name starting with CSC. This will format your phone and your phone will factory reset. You will lose your data and would need to setup your phone like it was new. USERDATA Stays empty.
6. Now connect USB cable to your laptop (Only laptop and not the phone)>> Turn off your phone >> Press volume up and volume down keep them pressed and plug in the USB type C into your phone.
7. You should be in download mode now, press volume up. In Odin you will see that phone is added.
8. Press start in Odin. Wait for it to finish and let the phone restart (it will happen On its own).
9. Done
SECTION 2HOW TO - N986U or N986U1 Latest Security Patch or Firmware upgrade / downgrade
1. Download the firmware for Corresponding device - For example if you are on SM-N986U1 then download for U1. If you are N986U locked to TMB, VZW, SPR etc etc download the firmware for U device and your Own CSC from OTA Thread or by using Frija or SamFirm tool.
2. If downloaded using Frija or SamFirm Tool it will be in a compressed folder (ZIP). Extract the firmware files in a folder, lets call it "Flash"
Follow the rest of the steps from Step 4 Above.
SECTION 3Going from one carrier locked device to another one like from ATT to TMob - Use the same instructions as in SECTION1 - just download the appropriate firmware.
FAQCan I get E-Sim with this ?
Yes, I have updated the instructions in this post.
If you are doing this to get E-Sim capability that t-mobile just added here is a post from someone who converted their phone to T-Mobile version (Old Post can be ignored)
WARNING - If for some reason you use ODIN to Flash back to Android 10 after being on Android 11, YOU WILL LOSE YOUR DATA
This is not a guide for Downgrading by whole Android Iteration as in Going from Android X to Android (X-1) or Android (X-2) ____ Versions
Reserved
I am having trouble with flashing the firmware onto my device. I am trying to convert my SM-N986U to SM-986U1 but every time I try to flash it I get an error. I have everything downloaded and prepared for it but I keep getting errors.
TuxPenguin98 said:
I am having trouble with flashing the firmware onto my device. I am trying to convert my SM-N986U to SM-986U1 but every time I try to flash it I get an error. I have everything downloaded and prepared for it but I keep getting errors.
Click to expand...
Click to collapse
What are the errors?
TuxPenguin98 said:
I am having trouble with flashing the firmware onto my device. I am trying to convert my SM-N986U to SM-986U1 but every time I try to flash it I get an error. I have everything downloaded and prepared for it but I keep getting errors.
Click to expand...
Click to collapse
airmaxx23 said:
What are the errors?
Click to expand...
Click to collapse
Yes tell us more, what are the errors you are getting?
So I'm kinda nervous. I got a message that ATID didn't like the current build. Said error when booted. Only options were to try again, factory reset, or view logs. I have the sm-n986u1
GDHAMTON7 said:
So I'm kinda nervous. I got a message that ATID didn't like the current build. Said error when booted. Only options were to try again, factory reset, or view logs. I have the sm-n986u1
Click to expand...
Click to collapse
ATID didn't like the current build?? Never heard of that error. Do you have a screenshot. How did you flash? Did you use Odin? You can always try again.. And worst case force reboot your phone..
Sent from my SM-N986U1 using Tapatalk
warriorvibhu said:
ATID didn't like the current build?? Never heard of that error. Do you have a screenshot. How did you flash? Did you use Odin? You can always try again.. And worst case force reboot your phone..
Click to expand...
Click to collapse
Unfortunately I didn't get a screenshot but it said something like there was an error with files or something. Either way I had a back up. I was already on the regular atj5 build on android 10. It is all working now.
GDHAMTON7 said:
Unfortunately I didn't get a screenshot but it said something like there was an error with files or something. Either way I had a back up. I was already on the regular atj5 build on android 10. It is all working now.
Click to expand...
Click to collapse
So you were able to get Beta?
Sent from my SM-N986U1 using Tapatalk
warriorvibhu said:
So you were able to get Beta?
Click to expand...
Click to collapse
I was. The members app works as well. Thank you
Thanks changed from AT&T to XAA. But damn bloatware on phone with ATT firmware is more worst then in europe.
I have been trying to odin my att note 20 ultra to the t-mobile firmware, so far I've only been able to get it to boot like it is the unlocked version, and can't find the reason
c-prodigo said:
I have been trying to odin my att note 20 ultra to the t-mobile firmware, so far I've only been able to get it to boot like it is the unlocked version, and can't find the reason
Click to expand...
Click to collapse
I dont know anyone who has done such a thing but i guess there is a use case for everything. Have you tried flashing unlocked Variant first and then Odin to T-Mobile.
that's exactly what I did, I switched from att to t-mobile, and first I wanted to see how the unlocked version would work, now I want to try the t-mobile firmware, but after downloading the one that says t-mobile and using odin, the phone stays on the unlocked firmware
c-prodigo said:
that's exactly what I did, I switched from att to t-mobile, and first I wanted to see how the unlocked version would work, now I want to try the t-mobile firmware, but after downloading the one that says t-mobile and using odin, the phone stays on the unlocked firmware
Click to expand...
Click to collapse
Which T-Mobile firmware?
If you want carrier stuff you have to change your CSC to TMB and flash U version not U1 version.
rjohnstone said:
Which T-Mobile firmware?
If you want carrier stuff you have to change your CSC to TMB and flash U version not U1 version.
Click to expand...
Click to collapse
Exactly
c-prodigo said:
that's exactly what I did, I switched from att to t-mobile, and first I wanted to see how the unlocked version would work, now I want to try the t-mobile firmware, but after downloading the one that says t-mobile and using odin, the phone stays on the unlocked firmware
Click to expand...
Click to collapse
Hope you downloaded a U firmware and not U1, CSC can be T-mobile on U1 too so make sure you download U firmware and hope you are not confusing CSC with T-Mobile firmware
I am trying to switch from U1 to U VZW brand. I get this error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 9881 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> abl.elf
<ID:0/007> xbl.elf
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
mariuszsnit said:
I am trying to switch from U1 to U VZW brand. I get this error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 9881 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> abl.elf
<ID:0/007> xbl.elf
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
Click to expand...
Click to collapse
Are you trying to go from the unlocked 3.1 DUC1 build to VZW firmware? They updated the bootloader from BL1 to BL2 on DUC1 so we are not able to roll back to anything older. The VZW firmware is still on BL1.
If that is the case will have to wait for VZW to release new firmware with BL2 before you can switch. My guess would be it will be included in next months security patch update.
Great guide to people like me that are thinking about dipping their toes in for the first time when it comes to flashing. I do have a question or two though:
What are the advantages of flashing from a U device to the unlocked U1 version? For instance I have the T-mobile U version and I have for the most part uninstalled all the carrier bloatware that came with it and put the ones that I couldn't into deep sleep so my battery life for the most part is unaffected. I also got it unlocked when I first got it since I paid outright for it. I notice most people also like getting updates faster and flashing enables them to do so but I honestly don't mind waiting for the slower OTA ones.
I guess I'm looking for a reason to do this (bored too) and use it as a learning process as well to gain the experience since I've never flashed before. Are there any settings or features in the U1 devices that I can't get from the play store that I can get by flashing? The only feature I truly miss is call recording but I don't think anyone has been able to figure that out yet..
dj24 said:
Great guide to people like me that are thinking about dipping their toes in for the first time when it comes to flashing. I do have a question or two though:
What are the advantages of flashing from a U device to the unlocked U1 version? For instance I have the T-mobile U version and I have for the most part uninstalled all the carrier bloatware that came with it and put the ones that I couldn't into deep sleep so my battery life for the most part is unaffected. I also got it unlocked when I first got it since I paid outright for it. I notice most people also like getting updates faster and flashing enables them to do so but I honestly don't mind waiting for the slower OTA ones.
I guess I'm looking for a reason to do this (bored too) and use it as a learning process as well to gain the experience since I've never flashed before. Are there any settings or features in the U1 devices that I can't get from the play store that I can get by flashing? The only feature I truly miss is call recording but I don't think anyone has been able to figure that out yet..
Click to expand...
Click to collapse
It mostly comes down to bloat and unlocked devices being eligible for beta programs. They used to do beta programs for some carriers but it seems to be happening less.
For the most part there isn't much difference. I've been toying with the idea of switching my unlocked to Verizon firmware to get RCS which Verizon recently activated for several Samsung devices. Was hoping it would come for the unlocked phones but doesn't look like it will. Haven't heard anything about the google/samsung RCS partnership in months.