Database Users

ATTN: AUSTRALIANS who upraded to Froyo 2.2 via Kies using NZ/Telecome i9000T update

I have done this, moving from the JH3 firmware 2.1 Eclair to 2.2 Froyo after usign Kies registry patch and spoofing Kies into allowing me to upgrade to the recently released Froyo 2.2 update for i9000T phones (ENGLISH) that require full use on the 850MHz band.
I have done the upgrade successfully and wow - absolutely astonished that the now TELECOM branded firmware which *ALSO* utilises the same 850MHz handwith as we do here in Australia via Tesltra - I DO NOT HAVE ANY NETWORK DATA CONNECTION. The only way I can is if i connect to my home wifi.
I now beg someone, preferably an Aussie or Kiwi whi has actually DONE the flash and very clearly explain, in full - either what i have done wrong or how this can be fixed.
Thanks
RoOSTA
--------------------
Side note: 2-3 months ago Telstra AU should've already given their customer base the option to upgrade to Froyo 2.2 and the time its taken (Optus AU first, then NZ Telecom), is beyond ridiculous. I have a separate problem which has caused me to update early due to some bullsh*t link that Andriod market needs to have constantly with G_TALK:
http://forum.xda-developers.com/showthread.php?t=851043&page=5

Hey man.
I don't have a Telecom Galaxy, but have you done your APN settings etc? Telstra's APN settings should be publicly available, or give Telstra a call and ask them.
It is one thing having your firmware sorted, but if you have no or wrong APN settings, you wont connect to the net. Good luck. :>

Id be inclined to think its apn settings. Just install csc to match your provider.

APN settings not activated properly. Thanks.
Any Telstra users here have the link it takes you to when you open/click "Telstra MyAccount" ?
Thanks

Just install Australia Unbranded I9000DTJP5/I9000XSAJP4/I9000DTJP3/I9000DTJP5 it has all APN settings for the required AUS networks.

he needed 850MHz band.

Did you try this?
http://configure.telstra.com.au/telstra/index.jsp

So after the APN settings were used, was this then fixed?

GT i9000T 850
check this thread http://forum.xda-developers.com/showthread.php?p=22922086#post22922086

help with csc pls!

can someone help me change my product code back to uk i believe the uk code is xeu?
how to i go about this using odin? pls help.

How about using the search function:
First hit: http://forum.xda-developers.com/showpost.php?p=9845517&postcount=3
Regards,
ww

ok thanks but i have tried that method and it does not allow me any selection other than the one im on, hence asking how to do it using odin.

you need on xeu firmware
Sent from my GT-I9000 using XDA App

would anyone be kind enough to direct me to a xeu firmware all the stock one in the general forum ive tried have not been xeu

bump please?

Right you want a UK CSC
The CSC (short for Customer Specific Customization). This includes connection data for the broadband networks as well as apps that are only available in certain languages/intended for a specific area.
Rom kitchin has many CSC including UK
http://forum.xda-developers.com/showthread.php?t=817703
CPW has most UK networks .
http://romkitchen.org/sgs/?s=generator
jje

i do not want to root is there an alternative method?

I think not. But you can try with adb.

Help debranding i5800

Hello am very new to android. Have just got a I5800 that was originally on t mobile. Its unlocked now but i want to flash a generic official rom. I know how to root it if needs be. Could someone advise me on how to go about the debranding.
Thanks in advance
Sent from my GT-I5800 using XDA App

Go to samfirmware.com there you'll find roms (official). Search here in the forum for a flashing guide...

ok i have just found the flashing guide.
i forgot to ask about the CSC. i have a diffrent windows mobile samsung (omnia lite b7300) and when i flashed this for the first time i never knew about the CSC.
my question is this. i assume flashing one package will also flash the CSC, and on the winmo omnia lite the CSC had details of the operators that the data settings are automatically recognised for.
is this the same for android devices and if so does anyone have a UK English CSC for the i5800 or is there any way i can back it up and reflash or am i just worrying about nothing
thanks for your help

Well if you're asking that if you flash one package, it will also flash the csc? Probable and if you want a csc for i5800 just download jpf.

yeah looks like JPF has a english CSC.. hope it has provider settings for the uk lol.
am gonna go try flash when the firmwares downloaded hopefully il be ok.
thanks everyone for your fast replys

anyone got any english i5800 roms with CSC included before i smash it out of frustration. loved this phone before this

found the language option but i still need a english uk default rom or csc because of service proivider settings and when i hard reset

Well download a rom from here and flash and you should be on froyo in the u.k and if not try finding an XW rom
http://forum.xda-developers.com/showthread.php?t=1063940
Sent from my GT-I5800 using XDA App

found one jus called JPM...strange thing is its already rooted. not sure i shoud be concerned or not...oh well it works and i have somthing to fall back on when i try other roms
thanks people

just found that you can change the CSC and product code same way you do with another phone (the SGS i think)
*#272*imei#
where imei is your imei
also hard resets, but on reboot it asked me if i was o2 prepay postpay or tesco mobile.
PERFECT!
off to see wat KIES says.
EDIT :
This device cannot be updated
PDA:JPM / PHONE : JP4 / CSC : JPF (XEU)
Not that that matters i have the right csc

Irish O2 operator PDA/Phone/CSC

Hi there!
Does any body has a values from Irish O2 operator for PDA/Phone/CSC and product code.
Trying to find them ...

What exactly do you mean? If you are trying to switch a phone from another country or want to check whether it's set up for Ireland, try *#272* (your imei number without the brackets)# This will tell you what region, should be XEU for Ireland. Post exactly what is you are looking to do.

Liam Good said:
What exactly do you mean? If you are trying to switch a phone from another country or want to check whether it's set up for Ireland, try *#272* (your imei number without the brackets)# This will tell you what region, should be XEU for Ireland. Post exactly what is you are looking to do.
Click to expand...
Click to collapse
It shows me O2I. But I've reflashed my device by Multi-CSC firmware and changed it to this value. Cos previous firmware I've used from some of Nordic countries.
I wonna reflashed back to stock firmware and need to know which one is stock for Irish O2.

I think you need to know which firmware was originally on your phone i.e. Froyo 2.2 for example. Then download the stock firmware from here for that version. If you purchased your phone since October 2010 I think it would have been Froyo 2.1 or possibly Froyo 2.2 As I said earlier, on your dialer put in *#272* followed by your phone imei number, then # This will tell you whether you are on XEU which you should be for Ireland. If you have Multi CSC on the phone you should be able to change it to XEU if needed. Why do you want to go back to the stock rom anyway?

Liam Good said:
I think you need to know which firmware was originally on your phone i.e. Froyo 2.2 for example. Then download the stock firmware from here for that version.
Click to expand...
Click to collapse
Correct. But not only 2.2, any firmware. And then could download latest one by using Samsung Fus downlaoder.
Liam Good said:
Why do you want to go back to the stock rom anyway?
Click to expand...
Click to collapse
As a back up, need to know stock version.

I9100xwke2 / i9100o2ike1 / i9100xxkdj / i9100xwke2 o2i gt-i9100 ie o2

Thanks Odia but I'm looking for the first SGS I9000

Ok,what version was on your phone when purchased? What version is on your phone now? What region is your phone set to now (see my earlier posts on how to do this)?
You won't be able to download the correct stock rom from here unless you know what version was on it when bought. For warranty, it should not make much difference unless your phone is set to a region other than Ireland.
I'm still struggling to know what it is exactly that you are trying to do, your phone has been flashed,right? What version was on before flashing and what version did you flash onto the phone?

Just thought of something, are you missing some of the provider specific apps? Is your phone rooted? Is your phone unlocked? Are you looking to return it to original status including O2 specific apps?

Liam Good said:
Ok,what version was on your phone when purchased? What version is on your phone now?
Click to expand...
Click to collapse
A while ago my device suddenly rebooted and never booted again. I've restored it by using self made JIG.
What was there have no idea. And this why I'm started this thread.
Liam Good said:
What version is on your phone now?
Click to expand...
Click to collapse
PDA: I9000XWJS8
PHONE: I9000XXJQ1
CSC: I9000OXXJP7
PCode: GT-I9000HKDO2I
Liam Good said:
What region is your phone set to now (see my earlier posts on how to do this)?
Click to expand...
Click to collapse
O2I
Liam Good said:
I'm still struggling to know what it is exactly that you are trying to do, your phone has been flashed,right? What version was on before flashing and what version did you flash onto the phone?
Click to expand...
Click to collapse
I'm trying to find stock variants for Irish O2. And then download firmware for my operator by this tool: http://fus.nanzen.se/
Liam Good said:
Just thought of something, are you missing some of the provider specific apps? Is your phone rooted? Is your phone unlocked? Are you looking to return it to original status including O2 specific apps?
Click to expand...
Click to collapse
Phone is rooted, unlocked and I don't have any problem with any apps. Just wonna to know stock version for my operator.

It's PDA: I9000XWJS8, PHONE: I9000XXJPY, and CSC: I9000OXXJS5.
Date: 01/04/2011.

If your product code is O2i, then you got the preset UK (O2i), maybe it's for ireland and not UK?
Sent from my GT-I9000 using XDA Premium App

Tyxerakias said:
It's PDA: I9000XWJS8, PHONE: I9000XXJPY, and CSC: I9000OXXJS5.
Date: 01/04/2011.
Click to expand...
Click to collapse
Could you please enter in dialer *2767*4387264636# and write down PCode value?

LuffarJoh, you as develper of Check Fus Downloader - are you tracking countries and fw codes?

Redwid said:
LuffarJoh, you as develper of Check Fus Downloader - are you tracking countries and fw codes?
Click to expand...
Click to collapse
If a user input on my website not already is a preset it is saved as unkknown and its up to me to found out which country/region is's supposed to be. With this method I'm trying to get a so complete database as possible. Any help is ofcourse welcome

[Q] XEU CSC for non-European devices?

Hi Guys!
Just figured out that p6800 was imported from the UAE to the UK where i got it from. The bother is is that i need German on Swype as im living in Frankfurt now. It's not an option on it at the moment.
So...is there a general XEU csc for this baby? I can't seem to find one... If there isn't, whats a good one to get with German on Swype, and id like it to be at the forefront of the update chain... i think that the UAE updates will probably be behind european 7.7's...
Any ideas?
Thanks All.

Still looking it is out but cant find a copy anywhere . Have french on mine at moment xef.