[Q] Rooted w/ Unrevoked, .apk files still read-only - Android Software Development

I used Unrevoked to root my desire earlier today. It went through all the steps fine, saying at the end that it was "victorious" and done. I re-booted, and got into the ClockwordMod, so I assume it worked as intended.
I'm trying to delete the stock bloatware off of my device (USCC Desire), but when I used the CMD line to remove some of the .apk files, it tells me they are read only. Does this mean I didn't get Root?
I noticed 3 things after using unrevoked.
1. My boot screen still shows that S-ON, and I was under the impression that Unrevoked turned this off.
2. I can get into clockwordmod, unlike before
3. I have the superuser app showing up on my app's list.
Am I missing something obvious?

BR3W CITY said:
I used Unrevoked to root my desire earlier today. It went through all the steps fine, saying at the end that it was "victorious" and done. I re-booted, and got into the ClockwordMod, so I assume it worked as intended.
I'm trying to delete the stock bloatware off of my device (USCC Desire), but when I used the CMD line to remove some of the .apk files, it tells me they are read only. Does this mean I didn't get Root?
I noticed 3 things after using unrevoked.
1. My boot screen still shows that S-ON, and I was under the impression that Unrevoked turned this off.
2. I can get into clockwordmod, unlike before
3. I have the superuser app showing up on my app's list.
Am I missing something obvious?
Click to expand...
Click to collapse
To test that you are infact rooted, please do the following:
1. Open command prompt/shell
2. cd into your AndroidSDK directory
3. Issue the command:: adb shell (if you see the # mark, then you are rooted -- otherwise type, su.)
To answer your questions:
1. When your phone says its "read-only file system"; this means that you need to issue the adb remount command; this will remount the system as RW (read/write), at which point you can go on deleting any apps you no longer want.
2. If you still have S-ON, that means you did not run the Unrevoked FOREVER file. You've only ran the Unrevoked 3 file. Notice when going to the Unrevoked site, that there are two different downloads.
3. Clockworkmod/superuser will exist because you are rooted and the process was successful.

alright.
So, I use adb shell, and get the $, type SU and it gives me the #. From there I go to do the remount, but it seems that all I get is "adb not found" I can do the list just fine from this point, but any adb commands result in not found.
I have also done the same commands (remount, remount with a specific directory) and it says "remount not found"
I can get the app list as mentioned, and have attempted to uninstall/remove a stock app, but get the "read-only" file system error. So it sound like the problem comes in either mounting the folder, or getting it to switch to read/write.

n/m, didn't read previous post properly

BR3W CITY said:
alright.
So, I use adb shell, and get the $, type SU and it gives me the #. From there I go to do the remount, but it seems that all I get is "adb not found" I can do the list just fine from this point, but any adb commands result in not found.
I have also done the same commands (remount, remount with a specific directory) and it says "remount not found"
I can get the app list as mentioned, and have attempted to uninstall/remove a stock app, but get the "read-only" file system error. So it sound like the problem comes in either mounting the folder, or getting it to switch to read/write.
Click to expand...
Click to collapse
What kind of phone? Some phones won't reliably mount the system partition read-write while running in normal mode. You should be able to do it from the clockwork recovery system though.

htc desire on 2.1, from USCC. I have not yet tried to do it from clockwork yet. I will try that later
Thanks!

Thanks for the help, putting her into ClockwordMod and using it to Mount /system solved the problem. Stock crap is gone yay!

Related

How do I get adb shell to work in recovery after root?

I rooted following the 10 minute root video, however forgot to remove a lot of those junk system apps, like CityID. I cannot get back into SU while in recovery, no matter what I do. How do I get back into the shell in recovery so I can remove all the bloatware?
I can get the error message:
- exec '/system/bin/sh' failed: No such file or directory
however i cannot seem to get back into the shell where I can access SU and remove the bloatware, anyone have any ideas on what im missing?
areghas said:
I can get the error message:
- exec '/system/bin/sh' failed: No such file or directory
however i cannot seem to get back into the shell where I can access SU and remove the bloatware, anyone have any ideas on what im missing?
Click to expand...
Click to collapse
I'm in the exact same boat as you. I don't know where to go from here.
run update.zip and let it fail again then you caN adb shell su
hmm doesnt seem to work for me
in order to get the back to adb shell in recovery, you have to go through the whole root process again. Then once you have snuck in the payload-update.zip and it has successfully installed it, you are able to do adb shell.
i had to run do the hole process over again to get su so i could remove cityid after root.
i used the 1.bat file as in the utube video for noobs.
ejlax said:
in order to get the back to adb shell in recovery, you have to go through the whole root process again. Then once you have snuck in the payload-update.zip and it has successfully installed it, you are able to do adb shell.
Click to expand...
Click to collapse
not cool lol, took me 3 hours to get the things to work with my sd card haha not worth it.
that is the only way
They are correct, you must do it all again, but look for a PNY 4gig class 4 sd. I tried hundreds of times over a 3 day period to do it and it worked first time and every time with this card.
when I run terminal emulator in the OS on the phone, and type su, the super user app grants it permission. Would we be able to delete system apps from there?
There is also another terminal app in the market for 1.99, listed as being for that purpose, so, has anyone tried it?
I don't have anything else I want to delete at the moment, since I got rid of cityid at the recovery adb prompt.
qwho said:
when I run terminal emulator in the OS on the phone, and type su, the super user app grants it permission. Would we be able to delete system apps from there?
There is also another terminal app in the market for 1.99, listed as being for that purpose, so, has anyone tried it?
I don't have anything else I want to delete at the moment, since I got rid of cityid at the recovery adb prompt.
Click to expand...
Click to collapse
The nand is locked down when you are in the main OS, so no, it would not work. You would need to do the re-root to gain access to /system/ as recovery is the only place where we are able to access it right now.
qwho said:
when I run terminal emulator in the OS on the phone, and type su, the super user app grants it permission. Would we be able to delete system apps from there?
Click to expand...
Click to collapse
E30kid said:
The nand is locked down when you are in the main OS, so no, it would not work. You would need to do the re-root to gain access to /system/ as recovery is the only place where we are able to access it right now.
Click to expand...
Click to collapse
I can get su access while in the OS. No problem on that. And I tried to delete teeter.apk, but got the "read only" message. So, I mounted it as read-write with
Code:
/system/bin/mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
that went fine too, but when I tried to delete teeter.apk, i got "rm failed, directory not empty"... but I'm not trying to delete a directory...
I guess the "nand is locked" and that's why, but... "the nand is locked" doesn't mean much to me, as I have no clue what that means

Superuser?

Does anyone know how to install this on the aria?
http://forum.xda-developers.com/showthread.php?t=682828
It's best to flash your Aria to a Liberated ROM. You can find it within the forums here. Since I can't post links yet. This will root the device and SuperUser will be added.
Not sure about that app. It looks like it does the same thing as the SU that comes in the Liberated ROM by attn1, just without the few extra options.
I tried booting into clockwork and mounting the system partition and doing this:
adb push Superuser.apk /system/app
adb push su /system/xbin
adb shell chmod 06755 /system/xbin/su
adb reboot
but when it rebooted the superuser app did nothing at all. No prompt or nothing running apps that needs su. I had usb debugging enabled. So I just restored a nand backup.
Might be a dumb question, but did you do adb remount ?
I used clockwork to mount the system partition. When I tried it with just adb remount it wouldn't mount the system partition. I would always get "Not a directory" error. But when clockwork mounted the partition it wrote the files fine with no error. When I rebooted the superuser icon and version were different than the one that came with the liberated rom.
I'm trying this now, I'll report back when I do it. I'll try a few different apps that require SU
I did the commands it said, I see the new icon, and when I press 'Menu', it shows the prefrences, but when I click it, it freezes the app.
It's probably not compatible with our phone yet.
Could be, but I'm pretty sure it does work, because if I remember correctly, Titanium Backup needs SU permissions, and I haven't encountered any kind of errors with it yet.
I see you posted on the thread for the program itself. Hopefully someone there will have a response.
Yeah, I'm hoping to get a response to it. We will see.
The newer version 2.2.2 works.
Awesome, ill give it a shot a little later.
Tried the newer version, and I get the same issues.
How did you install this one? I booted in to clockwork and selected install from zip file on sd and selected that file on my sd card.
I just did it through adb. I'll give that method a shot.
Looks like after doing your method, it works perfect now. Not sure why using adb doesn't work.

G2 Rooting Problem

Hey all,
I would like to know, what I might have done wrong in the rooting process. I used
This Tutorial hxxp://g2hacks.com/g2-hacks/how-to-root-g2-phone/
I made it to step #18 and was stopped by this error:
Code:
/data/local/tmp/root: data/local/tmp/busybox: not found
/data/local/tmp/root: data/local/tmp/busybox: not found
Unable to chmod /system/xbin/busybox: No such file or directory
/data/local/tmp/root: /system/xbin/busybox: not found
cp: not found
cp: not found
Ideas?
Thanks,
Danny
Here is a screenshot of what I pushed to the phone:
hxxp://i.imgur.com/No1id.jpg
You have a typo in your push command for busybox (you renamed it to root instead, which then got overwritten when you pushed root). Just push busybox again.
How do I back out and enter that push command again?
What would I type?
I'm a total novice.
On your comp, just type the command again:
Code:
adb push G2TempRoot/busybox /data/local/tmp/busybox
Then on your phone, in Terminal, just run the root command again:
Code:
/data/local/tmp/root
It should complete this time.
I made a mess. Check it:
hxxp://i.imgur.com/y3NRW.jpg
You are still in the adb shell (basically creates a terminal on your phone that you can interact with on your computer).
Type "exit" to leave the shell. This will return you to the regular command prompt (instead of the $). Then try the push command again.
So now the phone terminal gives me this:
Code:
/data/local/tmp/busybox: permission denied
Oh sorry, forgot you needed to set permissions on the file. Run this command again from your computer:
Code:
adb shell chmod 0755 /data/local/tmp/*
Then it should all work fine.
The errors are getting shorter
Now I get this:
Code:
mkdir failed for /system/xbin, File exists
This error doesn't matter (it's really more of a warning in this case) and is actually expected.
You should actually be rooted if you didn't see anything else.
AND I'M ROOTED... THANK YOU!
I'm new to Android from iOS. Any ROMS you would recommend?
Danny.B said:
AND I'M ROOTED... THANK YOU!
I'm new to Android from iOS. Any ROMS you would recommend?
Click to expand...
Click to collapse
Congrats! And there are a few threads about this that you can read through (just search for them). If you like HTC Sense (the interface HTC adds to a lot of their phones---basically lots nice visuals and extra polish to things), you can try Virtuous. If you like the stock look that the G2 comes with, there is a stock DEODEX rom out there. By de-odexing the rom, you can do things like customize the framework (e.g., customize the status bar icons/colors or add a battery percentage to it). Lots of people here (myself included), use CyanogenMod. It's close to stock but with lots of tweaks/extras (it's based on the Android Open Source Project or AOSP). It's also nice because it has frequent updates and constant development (they recently started pushing test builds that are based on Gingerbread---the new Android update only available on Nexus S).
Now that you are rooted though, it's easy enough to install Rom Manager and test them all out. Be sure to create a backup first as well.
ROM Manager installed. I'm backed up.
Thanks again for your help.
i cant flash the engineering hboot keep getting error md5sum : not found Verification of hboot-eng.img failed i re-download the files, re-extracted them to my SD card, and ran the flash_hboot script 3x still nothing plz help but im rooted and backed up
Did not want to create a new thread so I'm posting it here.
First off, I haven't tried rooting any of my phones previously so I'm obviously making a mistake somewhere.Hope someone here can help me out.
I installed visionary+ r14 but it just blacked out the screen with a heading.I've read elsewhere that it has all to do with the new firmware updates.My update for the DZ seems to be country a specific one and came out a couple of weeks back.
Anyway,
I tried this visionary method a few times but the phone just hung and I had to go to the homescreen and uninstall Visionary and reboot to get the phone to run smoothly again.
Then I read another way of rooting the thing and it took me here:
http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2
After a couple of tries I was able to push the files to the DZ but got stuck at this command:
adb shell chmod 0755 /data/local/tmp/*
The error it gives me is:
Unable to chmod /data/local/tmp/sqlite3: operation not permitted
Strange thing is, yesterday at the same point it gave me the same error but it was 'busybox' instead of sqlite3 and right before that it was something else.Which should mean that those earlier commands were run successfully by the terminal.
P.S. Debugging mode is on.Visionary is uninstalled. followed all the steps mentioned in the guide.
Okay.So I format the phone memory and I'm now able to move a few steps ahead.
But as soon as it seems that everything is going well, the terminal emulator refuses to open at this step:
"Launch Terminal Emulator, it Force Closes. Launch a second time, and you'll have a root shell "
waited a while and there is only a blank screen showing up.
mohitanfield said:
Okay.So I format the phone memory and I'm now able to move a few steps ahead.
But as soon as it seems that everything is going well, the terminal emulator refuses to open at this step:
"Launch Terminal Emulator, it Force Closes. Launch a second time, and you'll have a root shell "
waited a while and there is only a blank screen showing up.
Click to expand...
Click to collapse
It looks like you are trying to root a DZ with a firmeware version >= 1.72.
If yes to have to downgrade it to 1.34 first.
See either the instructions here: http://forum.xda-developers.com/showthread.php?t=905261 or the more comprehensive at http://wiki.cyanogenmod.com/index.php?title=HTC_Desire_Z:_Rooting
But if your CID is other then the ones stated in the the first thread you need a goldcard to downgrade first, which is also described in the first thread.
have fun - Guhl
Thanks a lot for your reply and as is the case, my phones CID is HTC_38 which does not seem to be downgradable without a gold card.
I read the procedure and although its well explained, it will take a bit of time.
Will try it sometime soon hopefully, although I wish someone would just make a simple rooting app for the newer versions!
It took us month without sleep to create the existing rooting tools. So I do not see any simple rooting tools on the horizon

[Q] Is it possible to push apps via adb to an encrypted xoom?

the subject says it all. I've been trying to push apps to my encrypted xoom all afternoon without any luck...
I'll go ahead and admit upfront that I am a noob when it comes to using the sdk... so that could also be a major factor.
adb install (insert exact location+ filename.apk for the app you want to install)
I just tested it out
for example
adb install C:/abc.apk
What command are you using? What error message are you getting? Did you do a adb remount to make sure that the /system/app path is writable?
You can always do an adb install [package name].apk as well.
scsa20 said:
What command are you using? What error message are you getting? Did you do a adb remount to make sure that the /system/app path is writable?
You can always do an adb install [package name].apk as well.
Click to expand...
Click to collapse
I just tried to execute adb remount (I had not until you mentioned it), but I get a "remount failed: operation not permitted".
Code:
Hannibal:platform-tools dmoore$ ./adb install /Users/dmoore/Documents/android-sdk/platform-tools/AsusReader.apk
1259 KB/s (7747001 bytes in 6.007s)
pkg: /data/local/tmp/AsusReader.apk
Failure [INSTALL_FAILED_DEXOPT]
Additional information: I am on a MacBook Pro using the latest version of the SDK (downloaded it yesterday).
try typing "adb devices" if it does not list your xoom try installing or re-installing the motorola usb drivers
http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers
just noticed the macbook part
http://www.samsung-tablets.com/motorola-xoom-usb-driver-for-pc-and-mac-download.html/
Ok... back to me being a complete when it comes to the SDK (and the Xoom in particular)...
My Xoom is completely stock... it has not been rooted or otherwise modified.
With that being said, is there some trick to getting the file system to mount as r/w? Do I need to reboot in to recovery before adb remount will work?
Sic123 said:
just noticed the macbook part
http://www.samsung-tablets.com/motorola-xoom-usb-driver-for-pc-and-mac-download.html/
Click to expand...
Click to collapse
I've already installed the Android File Transfer app... it only allows me to browse the SD card - not the root fs... unless there's something I'm missing...
dmoore44 said:
Ok... back to me being a complete when it comes to the SDK (and the Xoom in particular)...
My Xoom is completely stock... it has not been rooted or otherwise modified.
With that being said, is there some trick to getting the file system to mount as r/w? Do I need to reboot in to recovery before adb remount will work?
Click to expand...
Click to collapse
you dont have to be in recovery (recovery wont do any good unless you install clockwork recovery) for adb remount to work but if your not rooted you cant push files into the system folder thats the whole point of rooting is to unlock the system files also if your pushing it into /system/app the rom is odexed so you will need the apk plus the odex file
Sic123 said:
you dont have to be in recovery (recovery wont do any good unless you install clockwork recovery) for adb remount to work but if your not rooted you cant push files into the system folder thats the whole point of rooting is to unlock the system files also if your pushing it into /system/app the rom is odexed so you will need the apk plus the odex file
Click to expand...
Click to collapse
I have the odex file, so i'm not terribly worried about that.
My major question would be this though... Do I need to go full blown root, or can I just unlock the device?

[Q] Rooting a rooted Verizon Droid 2 to Gingerbread 4.5.601.A955.Verizon.en.

Does GingerBreak work with this version of Gingerbread 4.5.601.A955.Verizon.en.us? My phone is currently rooted with Z4Root 1.3. Is there an easy way of doing this?
Sam
Use the d3 root method. Works fine.
CM7GB-601
The D3 one click didnt work for me. It tries to reboot and the phone sits at the "Battery OK OK to Program Transfer Mode: USB" mode.
I was rooted before the update. I never used ROMS or anything just rooted for wireless tether and T backup. Not sure how to proceed but Im pretty happy with the update, fixed a bunch of issues for me.
Anyone else not able to root after the ginger ota?
acavallini said:
The D3 one click didnt work for me. It tries to reboot and the phone sits at the "Battery OK OK to Program Transfer Mode: USB" mode.
I was rooted before the update. I never used ROMS or anything just rooted for wireless tether and T backup. Not sure how to proceed but Im pretty happy with the update, fixed a bunch of issues for me.
Anyone else not able to root after the ginger ota?
Click to expand...
Click to collapse
I have the phone in PC Mode (instead of Mass Storage.) I don't know if that makes a difference.
The D3 Method worked great for me and my wife's phone.
Hi everyone,
I have the same question as CSSZiegler, but want to expand on it a little bit...
I have a Droid 2 that was rooted with Z4Root 1.3 several months ago. I also have SetCPU, SuperUser and Titanium Backup. No custom ROMs installed. Big Red just pushed down GB, and of course, I've lost root access. I'd like to regain root again without losing any contacts, Handcent messages, etc. I've read on several forums that the D2 can be rooted just like the D3 with a simple "one-click" operation referenced by quarky42 earlier.
Any opinions or experience with this? I greatly appreciate any and all assistance!
update
My phone downloads the update, I click install now... it reboots and starts the install, then about 35% of the way through, it turns to a triangle with ! Inside. Phone reboots and displays message software update failed. Anyone know where to find a logfile or have any suggestions?
Droid2 android 2.2.. rooted. No custom rom.
Did you fully SBF to stock using RSDLite?
Also http://forum.xda-developers.com/showthread.php?t=1246673 has a flashable version.
I will as soon as I get a computer again, thanks for the link. Unfortunately my mobo died yesterday. So I was hoping for an alternative solution. It would also be nice to keep all my texts.. I'll google that one.
So any ideas on the logs or an alternative solution?
Ok... I have also used Z4root. I got the update, it failed. I unrooted with Z4root. Re-downloaded the update, it failed. I tried to reinstall the kindle and blockbuster app. Re-downloaded the update, it failed. I reset to factory. Re-downloaded the update, it failed. Downloaded root checker, ran root checker, it said that I am not rooted. Re-downloaded the update, it failed.
This is the Detailed Results I got from the Advanced Root Checker:
Root Access is not properly configured or was not granted.
Superuser.apk - is NOT installed!
The application Superuser is recommended as it provides basic security and is available for free in the Android Market
System Environment PATH: /sbin /system/sbin /system/bin /system/xbin
The adb binary is set to default shell user access as a standard non-root user
Standard su binary location: ls -l /system/bin/su:
/system/bin/su: No such file or directory
Standard su binary location: ls -l /system/xbin/su:
/system/xbin/su: No such file or directory
Alternate su binary location: ls -l /sbin/su:
/sbin/su: Permission denied
Alternate su type binary location: ls -l /system/xbin/sudo:
/system/xbin/sudo: No such file or directory
SU binary not found or not operating properly
Results provided on your DROID2 device by Root Checker version 3.7 from joeykrim in the Android Market -
___________________________________________
Have I done something wrong??? I don`t understand why I can not get the update. Please help.
Ardalee said:
Ok... I have also used Z4root. I got the update, it failed. I unrooted with Z4root. Re-downloaded the update, it failed. I tried to reinstall the kindle and blockbuster app. Re-downloaded the update, it failed. I reset to factory. Re-downloaded the update, it failed. Downloaded root checker, ran root checker, it said that I am not rooted. Re-downloaded the update, it failed.
This is the Detailed Results I got from the Advanced Root Checker:
Root Access is not properly configured or was not granted.
Superuser.apk - is NOT installed!
The application Superuser is recommended as it provides basic security and is available for free in the Android Market
System Environment PATH: /sbin /system/sbin /system/bin /system/xbin
The adb binary is set to default shell user access as a standard non-root user
Standard su binary location: ls -l /system/bin/su:
/system/bin/su: No such file or directory
Standard su binary location: ls -l /system/xbin/su:
/system/xbin/su: No such file or directory
Alternate su binary location: ls -l /sbin/su:
/sbin/su: Permission denied
Alternate su type binary location: ls -l /system/xbin/sudo:
/system/xbin/sudo: No such file or directory
SU binary not found or not operating properly
Results provided on your DROID2 device by Root Checker version 3.7 from joeykrim in the Android Market -
___________________________________________
Have I done something wrong??? I don`t understand why I can not get the update. Please help.
Click to expand...
Click to collapse
I answered the thread you started with the process to un root and put your phone back to stock.
acavallini said:
The D3 one click didnt work for me. It tries to reboot and the phone sits at the "Battery OK OK to Program Transfer Mode: USB" mode.
I was rooted before the update. I never used ROMS or anything just rooted for wireless tether and T backup. Not sure how to proceed but Im pretty happy with the update, fixed a bunch of issues for me.
Anyone else not able to root after the ginger ota?
Click to expand...
Click to collapse
I had the same problem, and I think it is is because we already had Superuser installed. To remove it, from the directory where you downloaded the one click root, open the command window, then type adb shell
when you hit enter, the next line should end with a #
if it's $, run the one click again, then start this over
once you have the # prompt, type
mount -oremount,rw /dev/block/system /system
rm /system/bin/su
rm /system/xbin/su
hitting enter after each line.
After doing this, run the one click, and it should be fine. Worked great for me.
808Bill said:
I had the same problem, and I think it is is because we already had Superuser installed. To remove it, from the directory where you downloaded the one click root, open the command window, then type adb shell
when you hit enter, the next line should end with a #
if it's $, run the one click again, then start this over
once you have the # prompt, type
mount -oremount,rw /dev/block/system /system
rm /system/bin/su
rm /system/xbin/su
hitting enter after each line.
After doing this, run the one click, and it should be fine. Worked great for me.
Click to expand...
Click to collapse
Awesome! That did the trick, thanks for the info
808Bill said:
I had the same problem, and I think it is is because we already had Superuser installed. To remove it, from the directory where you downloaded the one click root, open the command window, then type adb shell
when you hit enter, the next line should end with a #
if it's $, run the one click again, then start this over
once you have the # prompt, type
mount -oremount,rw /dev/block/system /system
rm /system/bin/su
rm /system/xbin/su
hitting enter after each line.
After doing this, run the one click, and it should be fine. Worked great for me.
Click to expand...
Click to collapse
I'm having the same problem as the original poster... Installed gingerbread with z4root... phone was already rooted.. Now I have superuser and can't get rid of it.. .Tried unrooting through z4 and it doesn't work... Tried gingerbreak and the one click root through windows... Neither of those worked...
I either want to root through gingerbread or just get rid of the superuser.
when I type adb shell in command prompt (in windows 7) it says adb is not recognized as an internal or external command, operable program or batch file.
Any ideas? Thanks.
droid888 said:
I'm having the same problem as the original poster... Installed gingerbread with z4root... phone was already rooted.. Now I have superuser and can't get rid of it.. .Tried unrooting through z4 and it doesn't work... Tried gingerbreak and the one click root through windows... Neither of those worked...
I either want to root through gingerbread or just get rid of the superuser.
when I type adb shell in command prompt (in windows 7) it says adb is not recognized as an internal or external command, operable program or batch file.
Any ideas? Thanks.
Click to expand...
Click to collapse
I would SBF back to Froyo with RSDLite and install the OTA GB from phone info updates. After that use the D3 one click root method and you're golden.
droid888 said:
I'm having the same problem as the original poster... Installed gingerbread with z4root... phone was already rooted.. Now I have superuser and can't get rid of it.. .Tried unrooting through z4 and it doesn't work... Tried gingerbreak and the one click root through windows... Neither of those worked...
I either want to root through gingerbread or just get rid of the superuser.
when I type adb shell in command prompt (in windows 7) it says adb is not recognized as an internal or external command, operable program or batch file.
Any ideas? Thanks.
Click to expand...
Click to collapse
That error is usually because your trying to run the program from the wrong directory. Make sure your command line is started from the folder that adb.exe is located in. You can do this by Shift and right mouse button and “open command window here”.
acavallini said:
That error is usually because your trying to run the program from the wrong directory. Make sure your command line is started from the folder that adb.exe is located in. You can do this by Shift and right mouse button and “open command window here”.
Click to expand...
Click to collapse
I searched the phone's sd card.. I couldn't find it... do you know where adb.exe is located?
The fact that he said to hold shift and the right mouse button should tell you he's talking about a folder on your computer and not on your SD card.
idefiler6 said:
The fact that he said to hold shift and the right mouse button should tell you he's talking about a folder on your computer and not on your SD card.
Click to expand...
Click to collapse
Finally got it to work... now.. I used motorola one click root.exe where you use the exe on the computer. Just out of curiosity, is there a one click method to unroot? Thanks!

Categories

Resources